SD System RoadView Touch 3.0 smart HD,RV-330LB User Manual

※ Safety precautions included in this manual are intended to ensure
your safety and prevent property damage.
Read them carefully before using the product.
※ The product's functions and design features may change without
prior notice for quality and functionality improvement purposes.

1

Precautions

Proper Product Use

☞ Whenever you change the mounting position of the product, adjust the camera angle
and check the video recording to ensure accurate video capturing.
☞ Excessively dark window tinting can hinder normal video recording.
☞ Use the power cable provided by the manufacturer to ensure normal functionality.
☞ Viewing or operating the product while driving can lead to an accident. Use the product
only while the vehicle is stationary.
☞ This product's cameras may not be able to record smooth images in the event of a
sudden change in the brightness level (such as when entering a tunnel) or under
extreme conditions such as shooting directly into the midday sun and shooting in the
darkness of the night with no sufficient light sources in the vicinity.
☞ Certain impact events may not be severe enough to trigger video recording.
☞ In the event of an accident, images may not be recorded if the product has been
damaged or the power supply has been disrupted.
☞ Product damage due to an accident or any other cause may result in failure to record
video data and/or file errors.
☞ Unauthorized disassembly, repair, and modification of the product may lead to product
damage and/or malfunction. The consumer is solely responsible for any product defect
or issue arising thereof.
☞ Liquids and metallic objects entering inside the product can pose electric shock, fire,
and electric leakage hazards. If this occurs, turn off the product, unplug the power cable,
and contact the service center.

Proper microSD Card Use

☞ Insert/remove the microSD card only after powering the main unit off (front LED off).
Inserting/removing the microSD card while the unit is powered on can cause serious
errors. In addition, removing the microSD card while recording is in progress can corrupt
recording data and damage the card itself.
☞ Format the microSD card and perform a virus check at least twice a month to prevent
potential data recording failures.
☞ Use authorized microSD cards only.
☞ The warranty period is 3 months for the microSD card, 6 months for the accessories,
and 1 year for the main unit.
☞ Using a microSD card that contains existing data can lead to errors. Delete all existing
data before use.
☞ Frequently check the recordings and format the microSD card at least once a week
(File System: FAT32/32bit).
☞ Replace the microSD card if it is not recognized when connected to a computer or
cannot be formatted properly.
☞ Using a microSD card that contains existing data can lead to errors. Delete all existing
data before use.
☞ The manufacturer claims no responsibility for data stored on to the microSD card.
☞ Regularly check the data stored on the microSD card and the internal memory to
ensure normal recording performance. This product has been designed as an in-vehicle
recording device. Do not use for purposes other than as intended. The manufacturer is
not responsible for any product defect or issue resulting from negligent use or care of
the product by the consumer.

2

Accessories

After unpacking the product packing box, check inside and make sure all accessories
are included. (Refer to images below)
If the product or any of its accessories is damaged or defective, please contact your
retailer. (Actual components may differ from the images below.)

Main Unit Rear Camera & Extension Cable

microSD Card 　microSD Card Adapter

Clips Quick Guide

Power Cable

OR

Constant Power Cable

Cigarette Jack Cable

※Actual components may differ from the images above.
Accessories described in this manual are subject to change without prior notice for
quality improvement purposes.
※The external GPS module is sold separately and is available for purchase at your
retailer.

3

Product Overview

# The actual component may differ from the images above.

Security LED

Flashing

security indicator.

External GPS Antenna
Connector

Rear Camera Connector
Power Cable Connector

Debugging Port
Servicing Port
(do not open.)

Reset Button
If the black box
becomes
unresponsive
during use,
press this button
to reboot the
device.

microSD Card

Slot

Built-In Microphone

Status LED

Blue

Recording LED

Red

Power/Manual Recording Button
Press and hold to turn the power on/off.
Short press to start manual recording.

4

Product Overview

Mount

Lens

Rear Camera Specifications

Rear Camera

Effective Pixels

Power

Viewing Angle

Operating

Temperature

Approx. 120º

640X480

DC 5V

-20ºC

~+60ºC

5

Installation

[Correct Installation Angle]

1/3 of

Vertical Space

2/3 of

Vertical Space

Distant Area

¾ = Dynamic Area

¼ = Fixed Area

[Incorrect Installation Angle]

Distant Area

Dynamic Area

2/3 of

Vertical Space

1/3 of

Vertical Space

6

Product Use

[Front/Rear Preview]

①

②

∙ Tap ① to bring up the menu. The screen automatically reverts to recording mode
after 10 seconds of inactivity.
∙ Tap ② to flip between front and rear camera feeds.

Caution)

If a microSD card has not been inserted, the screen will not turn on. Instead, the black
box will repeatedly ask you to check the microSD card. The black box will function
normally once a microSD card has been inserted.
If you receive the same message even with a microSD card inserted into the black box,
try removing the card and inserting it again. If the problem persists, replace the microSD
card or contact the service center.

7

Menu

① Infinite/Parking Mode Selection
② Video Recording Playback
③ Volume Adjustment (0 - 5)
④ Settings
⑤ Parking Mode Event Count
⑥ GPS Status
⑦ Software Version
⑧ Time & Date
Displays retrieved time and date when connected to GPS.
Displays the system's time and date when not connected to GPS.
(System time and date can be configured under Settings.)
⑨ LCD Off
Tap on the LCD screen to turn the screen back on.

[Terminology]

∙ Infinite: Captures 1minute recordings while the vehicle is on the move.
∙ Parking Event: Starts to record whenever impact is detected while the vehicle is parked.
(20 seconds leading up to and 20 seconds after the impact).
∙ Parking Infinite: Captures 1minute recordings while the vehicle is parked.
∙ Manual: Manual recording initiated by the user.

Menu

①

②

③

④

⑤

⑥

⑦

⑧

⑨

8

Settings: Video & Channel

∙ Choose the desired picture quality (High, Medium, Low).
∙ "High" produces the best picture quality at the cost of recording capacity, whereas
"Low" increases the recording capacity at the cost of picture quality.
∙ Once the recording capacity of each type of recording data is reached, oldest data is
overwritten with new data. Back up the recording data on to a separate storage device
on a regular basis.

∙ Choose between Front/Rear and Front.
∙ Front/Rear: Displays video feeds from front and rear cameras on a single screen. Front
camera feed takes up the bulk of the screen, with the rear camera feed shown as a small
window on the upper right corner. Tap on the PIP window to flip between the channels.
(For more information, refer to "Front/Rear Preview" section on page 6.)
∙ Front: Displays video feed from the front camera only (full screen). Video from the rear
camera is not recorded.

Video

Channel

9

Settings: Sensitivity & LCD Off

∙ Adjust the impact sensor sensitivity.
∙ Tap on the Sensitivity icon to cycle through Off, Low, Normal 1, Normal 2, Normal 3, High,
and Very High in that order.
∙ Impact registration above the specified sensitivity setting while the vehicle is on the move
or parked triggers event recording.

∙ Configure LCD timeout.
∙ Tap on the LCD Off icon to cycle through 30 secs, 1 min, 5 mins, Clock, and
Always On in that order. The LCD automatically turns off after the specified amount of
time.To turn the LCD back on, simply tap on it.
∙ "Clock" displays a clock instead of a blank screen after 1 minute of inactivity.

Sensitivity

LCD Off

Caution)

∙ "Very High" is so sensitive that the black box can recognize bumps on the road or even
loud noises from inside the cabin as event recording triggers. If this occurs, try lowering the
sensitivity setting.
∙ "Off" instructs the black box not to initiate event recording even if actual impact has been
registered. Remember this before using the "Off" setting. ( In Parking mode, event recording
will still take place even if Sensitivity is set to "Off".)

10

Settings: Parking Mode & Clock

∙ Configure Parking Mode and Switchover settings.
∙ Parking Mode: Parking Infinite or Parking Event
∙ Switchover: Off, 5 mins, 15 mins, 30 mins
∙ While in Infinite mode, the black box automatically switches over to Parking mode if its
G-sensor does not detect vehicle motion for the duration specified under Switchover.
∙ While in Parking mode, the black box automatically reverts to Infinite mode when its
G-sensor detects motion.

Parking Mode

Clock

∙ Configure the black box's system time and date.
∙ Select a field and use the buttons on the right to change its value.
Tap on the exit icon on the right to exit.
Changed settings are saved automatically.
∙ Configured system time and date settings appear on video recording file names and on
the clock displayed when the LCD is automatically turned off (if enabled).

/

11

Settings: Timer & Shutoff Voltage

∙ While in Parking mode, the black box turns off automatically after the amount of time set
under Timer has elapsed.
∙ Tap on the Timer icon to cycle through 6H, 12H, 24H, and 48H in that order.

∙ Shutoff Voltage protects your car's battery from discharging completely when using them
as a source of constant power for the black box.
∙ While the black box is operating in Parking mode, Shutoff Voltage automatically turns off
the black box if the battery voltage drops below the specified level for longer than 5
minutes.
∙ Tap on the Shutoff Voltage icon to cycle through 11.5V, 11.7V, 11.9V, and 12.1V in that
order.
Choose the shutoff voltage level based on the current battery voltage level.
∙ Current battery voltage level is displayed on the right side of the Shutoff Voltage screen.

Video

Shutoff Voltage

12

Settings: Microphone & Calibration

∙ Turn the built-in microphone on or off.
∙ Set to "Off" if you do not want to have conversations and sounds from inside the cabin
to be recorded along with the video.

∙ Calibrate the black box's LCD screen.
∙ Calibrate the screen if your touch input is not being recognized correctly.
Tap on the calibration points accurately using your fingernail or a pen (recommended).

[Caution]
∙ Incorrectly calibrating the screen may lead to you not being able to select the menu icons.

Microphone

Calibration

13

Settings: Reset & Format

[Default Settings]
∙ Video: High
∙ Channel: Front/Rear
∙ Sensitivity: Normal 2
∙ LCD Off: 30 secs
∙ Parking Mode: Parking Event
∙ Switchover: 5 mins
∙ Timer: 12H
∙ Shutoff Voltage: 11.9V
∙ Microphone: On

∙ Restore the black box's factory default settings.
∙ Resetting erases all previous user-configured settings.

∙ Format the microSD card.
∙ If using a new microSD card, make sure to format it first.
∙ Formatting a used microSD card erases all files stored on the card. Back up all
important data on to a separate storage device before formatting the card.
∙ The black box may not turn on if the folders inside the microSD card contain files
other than black box video files.

# microSD Card File System: FAT32/Disk Allocation: 32K

Reset

Format

∙ PC Viewer lets you watch video recordings from microSD cards and configure the black
box's settings.
∙ Video recordings can be played back using regular media players, but doing so will display
the feed from the front camera only.
∙ You must play back the video recordings using PC Viewer if you want to see feeds from
both cameras.

1. PC Viewer Installation

∙ Insert the microSD card into the adapter (included) and then connect the adapter to your
computer using an SD card reader (sold separately).
∙ Double-click on the PC Viewer installation file contained in the micro SD card to start the
installation process.
∙ Once the installation is complete, a SOOIN Viewer shortcut will appear on the desktop.
Double-click on this icon to launch PC Viewer.

2. PC Viewer Overview

14

PC Viewer

① Menu Bar
② Playback Window
③ G-Sensor
④ Playback Window Settings
⑤ Default Playback Speed
⑥ Playback Speed
⑦ Default Brightness
⑧ Brightness
⑨ Mute
⑩ Volume
⑪ Speed Indication: Requires GPS module
(sold separately).
⑫ GPS Map: Requires GPS module
(sold separately).
⑬ Operating Mode
⑭ Mode-Specific Playlist

[Default Settings]
∙ Drive: Custom
∙ Switchover: Parking Mode Event
∙ Parking Mode Activation: 5 mins
∙ Impact Sensitivity (Infinite): Normal 2
∙ Recording Quality: High
∙ Channel: Front/Rear
∙ LCD Off: 30 secs
∙ Timer: 12H
∙ Audio: Record
∙ Speaker Volume: Level3
∙ Battery Discharge Protection:
Passenger Vehicle (12V)
∙ Shutoff Voltage: 11.9V
∙ System Time & Date: Custom
∙ Save to: Custom
∙ Skip Frame Count: 5

Print

Settings

Zoom In/Out

About PC Viewer

⑫

⑬

⑭

①

②

③

④

⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪

④

[Menu Bar]

Open file from microSD card.
Screen Capture: Screen captures are saved

to the CAM_CAPTURE folder.
Save Clip: Save a specific portion of the video
being played back.

15

Miscellaneous

Recording Capacity

Memory

Capacity

16GB

Channel Category Infinite Event

Parking

Infinite

Parking

Event

1CH

Front

40% 20% 40%

40% 20% 40%

2CH

Front+Rear

Allocation

Available

Space

Approx. 6GB Approx. 6GB

Approx. 6GB

Approx. 6GB

Recording

Capacity

Approx.

110minutes

Approx.

220minutes

Approx.

120minutes

Approx.

240minutes

Approx. 3GB

Approx. 160

recordings

Approx. 310

recordings

Approx. 3GB

Approx. 170

recordings

Approx. 330

recordings

Allocation

Available

Space

Recording

Capacity

G-Sensor

G-Sensor

Recording Resolutions

Mode Condition

Recording

Status

Destination

Folder

Front

Camera

Rear

Camera

Infinite Mode

Infinite

Infinite

INFINITE

HD

(1280x720)

HD

(1280x720)

VGA

(640x480)

EVENT

Parking Mode

PARKING VGA(640x480)

EVENT

PARKING

Manual Mode

Motion

Detection

Power/

Manual Recording

button is pressed.

Infinite

Event

Parking Infinite

Parking Event

Parking Event

Event EVENT

16

Miscellaneous

Operating Status

Product Specifications

Status

(Blue)

Status

(Red)

Blue/Red

Off

Off

On

On

Flashing

Flashing in Sync

Flashing Alternately

Operating StatusLED

Parking Event

Infinite/Parking Infinite

Settings or playback mode

Recording

Standing by in

Parking Event mode

System error or

firmware update in progress

microSD card formatting in progress

SpecificationCategory

Model Road View RV-330LB

3.0˝WQVGALCD

Touch Panel

Camera

Resolution &

Frame Rate

Front(Main Unit)

Rear

Viewing Angle

Front (1CH)

Front/Rear

(2CH)

Encoding

File Format

Power

Dimensions & Weight

Operating Temperature　

Storage Temperature

3.0˝Resistive Touch, Glare

2.0M-pixel, 1/3.2’ CMOS Sensor

1/4" CMOS IMAGE SENSOR

Approx. 120°(diagonal)

Front Camera: 1280 x 720 (Max. 30 fps)

Front Camera: 1280 x 720 (Max. 25 fps)

Rear Camera: 640 x 480 (Max. 10 fps)

H.264(Video), PCM(Audio)

.AVI

12V DC

95 x 85 x 34.5mm/110g

-20ºC ~ +60ºC

-30ºC ~ +70ºC

Product Warranty

This product's warranty period comes into effect on the date of purchase.
Please have your retailer record the date of purchase to ensure full
warranty coverage.

SD System Co., Ltd.
613, hyundai I valley, 31,244, Beon-gil, Galmachi-Ro, Jungwon-Gu, Seongnam-Si,
Gyeonggi-Do, Korea
Website: www.sdsystem.com

Servicing and Tech Support

1.Covered Servicing

- 1 year from date of purchase
(3 months for the microSD card and 6 months for accessories)

2. Paid Servicing

- Upon expiration of normal warranty coverage

- Malfunctions resulting from user negligence

- Malfunctions caused by a force majeure event

- Malfunctions caused by issues with the power supply or peripherals

- Defects caused by other extraneous factors

1.Product(Model):In-VehicleBlackBox(RV-330LB)

2.Retailer:

3.Manufacturer/CountryofOrigin:SDSystemCo.,Ltd./RepublicofKorea

4.CertificationNo.

Model

Telephone

Purchase Date

Telephone

Product

Serial No.

Purchaser

Address

Retailer

RV-330LB