Scotsman Ice Machine HID312 Installation Manual
| Installation
IceZone® -X Installation Instructions
for Scotsman
HID312 Meridian
Ice and Water Dispensers
This module will show the steps to install IceZone® -X on Scotsman HID312 Meridian Ice
and Water Dispensers. Please review the entire instructions prior to installation.
Caution: Installation should be done by a qualified technician using appropriate safety equipment and procedures.
| Installation
Follow the manufacturers
guidelines for cleaning
the ice and water
dispenser
thoroughly.
Before Installing IceZone® -X, clean and sanitize the interior of the ice and water
dispenser thoroughly according to the manufacturer’s guidelines. All surfaces should
be free of slime and scale before starting the installation.
| Installation
Recommended Tools
Hand Drill
Phillips Bit Driver
1/8” Drill Bit
½” Drill Bit
1 1/8” Step Drill Bit
¼” Nut Driver
Phillips Screwdriver
Safety Goggles
Hose Cutter or Utility Knife
Channel Lock Pliers
Marker to mark hole locations
File or de-burring tool to de-burr holes
| Installation
Installation Overview
This is a Scotsman HID312 Meridian Model Ice and Water Dispenser with IceZone® -X
installed.
Top Front Angle
| Installation
Preparing the HID312 Meridian
Remove the front cover to access the interior of the dispenser.
Remove ice and water chute.
Ice Chute
Front
Front
Water Chute
Water Chute
Ice Chute
| Installation
Preparing the HID312 Meridian
Press the ‘ON/OFF’ button until
the machines powers “off” and
unplug from the power source.
Installation Overview
| Installation
Right Panel, right Front- bottom view Front
Ice Dispenser
Supply
Water Dispenser
Supply
Ice Dispenser
Supply
Return
Water Dispenser
Installation Overview
| Installation
Right Panel, right Front- bottom view Front
Ice Dispenser
Supply
Water Dispenser
Supply
Ice Dispenser
Supply
Return
Water Dispenser
Loading...