ERC Series Remote Condenser - Horizontal Coil Type
1
3
2
ITEM PART
NUMBER NUMBER DESCRIPTION
1 02-3575-01 Fan guard
2 18-8800-01 Fan blade
3 18-8796-01 Fan motor ERC101
18-8796-32 Fan motor ERC151, ERC201, ERC302, ERC401, ERC402
18-8797-32 Fan motor ERC301
4 16-0850-01 Quick connect, discharge
5 16-0850-03 Quick connect, liquid
6 A36990-001 Leg kit for ERC101, 151, 201, 301, 302
not available Leg kit for ERC401, 402
4
5
6
ERC Series Remote Condenser - V Coil Type
Models: ERC111, ERC211, ERC311, ERC411, ERC680, ERC1086
2
4
3
5
1
Item Part
Number Number Description
1 03-1645-03 Screw
2 02-3575-01 Fan guard,
3 16-1025-01 Headmaster, ERC411
11-0422-22 Headmaster, all others
4 18-8816-01 Fan blade
5 12-2651-01 Fan motor, ERC311, 411, 680, 1086
12-2651-02 Fan motor, ERC111, 211
Not Shown:
A37169-001 Leg - fits all
A37170-001 Leg brace, ERC111, 211, 311, 411, 680, 1086
03-1645-01 Screw for legs
ERC111, 211, 311, 411
16-0850-01 Quick connect, discharge
16-0850-03 Quick connect, liquid
ER680, 1086, ER2C6810, 1316:
16-1057-04 Quick connect, discharge
16-1057-03 Quick connect, liquid
Fan motor run capacitor: 18-8878-01
Line set ends: KTE4 (set of all 4) Eclipse line set ends: KTE6-EH (set of all 6)
ERC Series Remote Condenser - V Coil Type
Models: ERC611, ERC2086, ER2C6810, ER2C1316
2
4
3
5
1
Item Part
Number Number Description
1 03-1645-01 Screw
2 02-3770-01 Fan guard
3 11-0422-22 Headmaster, ERC611
4 18-8820-01 Fan blade
5 12-2717-01 Fan motor
Not Shown:
A37169-001 Leg - fits all
A37296-001 Leg brace,
03-1645-01 Screw for legs
ERC611:
16-0850-01 Quick connect, discharge
16-0850-03 Quick connect, liquid
ER680, 1086, ER2C6810, 1316:
16-1057-04 Quick connect, discharge
16-1057-03 Quick connect, liquid
Fan motor run capacitor: 18-8878-01
Line set ends: KTE4 (set of all 4)
Eclipse line set ends: KTE6-EH (set of all 6)
Bulletin Number: PS - 3 - 98
Bulletin Date: Revised Nov. 1998
SERVICE BULLETIN
Subject: ERC301 Fan Motor
Effective with serial number 103236-10B, the ERC301 remote condenser is being manufactured with
a one-third H.P. fan motor instead of the prior one-quarter H.P. motor.
The part number for the new motor is: 18-8797-32.
Although the ERC301 is the only condenser manufactured with the one-third HP fan motor, the
18-8797-32 motor will be used as a common replacement for ERC151, ERC201, ERC302, ERC401,
and ERC402 fan motors.
Note: Fan motors shipped and ERC301 condensers built after 11/1/98 have a shorter shaft.
The fan blade mounts flush to the end on those motors. A quick check is that the “flats” on
the motor shaft are now 1 ” long and they were 2 ½” long. When the longer shaft one-third HP
motor is used, position the fan blade 7/8" in from the end of the motor shaft.
5
8
Loading...