Scitec Avaya AV100,Avaya AV200,Avaya AV300 User Manual

AVAYA AV SERIES
Telephone User Guide

Avaya AV100, AV200, AV300
Single-Line Telephones

Congratulations on the purchase of your Avaya AV Series tele­phone. This high precision electronic device includes advanced
features suitable for use in today’s environment and requires
minimum maintenance. It is simple to install and easy to use.

Installation

This telephone is only intended for connection to telecommuni­cations systems from Avaya. It must not be connected directly
to the PSTN. If any problems should occur during operation,
please initially contact your specialist dealer or your system
administrator.

Tips on phone location

Place the telephone on a non-slip surface, especially if the furni­ture is new or has recently been cleaned or polished. Varnishes
or cleaning agents may contain substances which soften the
base parts of your telephone, and the softened bases can leave
undesirable marks on the furniture. Scitec cannot assume liabil­ity for damages of this kind.

Declaration of conformity

We, Scitec, declare that Avaya AV Series telephones comply
with the basic requirements and other relevant rules in accor­dance with EU directive 1999/5/EU (radio and telecommunica­tion terminal equipment, R&TTE). This telephone is intended
for connection to Avaya telecommunications systems and
meets the fundamental requirements formulated in EC directive
1999/5/EC (Radio and Telecommunication Terminal Equipment,
R&TTE). The design of this telephone makes it unsuitable for
direct operation on interfaces of public telephone networks.

Safety

When using your telephone equipment, follow basic safety pre-

cautions to reduce the risk of re, shock and injury to persons:

1. Read all instructions.

2. Follow all warnings and instructions marked on the product.

3. Before cleaning, unplug this product from the wall. Use a
damp cloth for cleaning. Do not use liquid cleaners or aerosol
cleaners.

4. Do not use this product near water, for example, near a bath­tub, washbowl, kitchen sink or laundry tub, in a wet basement,
or near a swimming pool.

5. Do not place this product on an unstable cart, stand, or table.
The product may fall, causing damage to the product.

6. Do not block or cover the slots and openings in the cabinet
and on the back or bottom of the product. Do not place the
product on the bed, sofa, rug, or other similar surface.

7. Do not place this product near or over a radiator or heat reg­ister.

8. Do not place this product in a built-in installation unless
proper ventilation is provided.

9. Never push objects of any kind into this product through cabi­net slots. This could result in re or electric shock. Never spill

liquid of any kind on the product.

10. To reduce the risk of electric shock, do not disassemble this

product. When service or repair is required, take it to a qualied

serviceperson.

AVAYA AV SERIES
Telephone User Guide

Safety

11. Unplug this product from the wall outlet and refer servicing

to qualied personnel under the following conditions:

a) If liquid has been spilled into the product.
b) If the product has been exposed to rain or water.
c) If the product does not operate according to the operating
instructions.
d) If the product has been dropped or the cabinet has been
damaged.
e) If the product exhibits a distinct change in performance.

12. Do not use the telephone (other than a cordless type) during
an electrical storm. There is a remote risk of electrical shock
from lightning.

13. Do not use the telephone to report a gas leak if the tele­phone is in the vicinity of the leak.

14. Keep the telephone dry. Wipe immediately if wet. Liquids
may contain minerals that can corrode the electronic circuits.

15. Use and store the telephone in a moderate temperature
environment. Extreme temperatures can shorten the life of
electronic devices, damage batteries and distort or melt plastic
parts.

16. Keep the telephone away from excessive dust and dirt.

17. Wipe the telephone with a damp cloth occasionally to keep
it looking new. Do not use harsh chemicals, cleaning solvents
or strong detergents to clean the telephone.

Checking the Parts List

Ensure that you have the following parts:

1. Modular handset

2. Telephone

3. Modular telephone line cord (7’)

4. Modular coiled handset cord (10’)

Connecting the handset cord

1. Plug one end of the handset cord into the modular jack on

the handset.

2. The remaining end of the handset cord plugs into the jack

located on the left side of the base unit.

Connecting the line cord

If the telephone is to be desk mounted, plug one end of the 7’

line cord into the modular jack at the rear of the telephone. The
remaining end of the line cord plugs into the jack located on

the wall.

Desk/Wall Mounting

Each telephone is equipped with a bracket. The phone may be
installed in either desk or wall mount mode by changing the
position of the bracket.

Desk mount>

Wall mount>