Schwinn MPower Echelon2 Console Owner's Manual

Owner’s Manual
MPower™ Echelon2 Console
Owner’s Manual
2
Introduction
Ease of Use
Push the ON/OFF button to activate console
Options in Workout
Access
AVG/MAX values at any time during workout
Activate optional “gear” display for visual cue of resistance level
Reliability
“Plug and Play” design eliminates wireless communication issues common to modern fitness environments
Readability
Large, easy to read characters laid out in a way designed for how you train
Connectivity
Save workout data wirelessly via ANT+, or with data output through USB
Easy Set-up
Simply plug the components of the system together, calibrate the console per the installation instructions, and you are ready to ride
Long Battery Life
System uses 2 C cell batteries, which will last up to 12 months.* Batteries are located in one, easy to access location for simple replacement
*Assumes an average usage of 20 hours per week without backlight usage. Backlight
usage and usage with external leader board systems can reduce battery life.
Key features of the Schwinn® system:
Welcome to the new Schwinn® Console system! Your new console will add measurement to your Schwinn® bike, giving you more training options than ever before.
Owner’s Manual
3
Console Speed Sensor
Length 7.1” (18 cm) Length 3.3” (8.3 cm)
Width 3” (7.7 cm) Width 2.5” (6.4 cm)
Thickness 1.9” (4.8 cm) Thickness 1.5” (3.7 cm)
Weight (console w/ sensor) 2.0 lb (0.9 kg)
Shipping Weight 2.8 lb (1.3 kg)
Power Sensor Power Requirements
Length 4.2” (10.7 cm) Console (2) C Batteries (LR14)
Width 2.6” (6.6 cm)
Thickness 1.0” (2.5 cm)
Weight 0.17 lb (0.1 kg)
Shipping Weight 0.22 lb (0.1 kg)
DO NOT dispose of this product as refuse. This product is to be recycled. For information on the proper method of disposal, contact a Customer Service representative. Contact information is available in the Contacts section of this manual. For additional information, please visit:
www.SchwinnEquipment.com
Specifications
Patent Information: This product may be covered by US and Foreign Patents and Patents
Pending.
Owner’s Manual
4
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Before using this equipment, obey the following warnings:
Important Safety Instructions
Children must not be let on or near this machine. Moving parts and other features of the machine can be dangerous to children.
Consult a physician before you start an exercise program. Stop exercising if you feel pain or tightness in your chest, become short of breath, or feel faint. Contact your doctor before you use the machine again. Use the values calculated or measured by the machine’s computer for reference purposes only.
If you have a pacemaker or other implanted electronic device, consult your doctor before using the wireless chest strap or other telemetric heart rate monitor.
Do not use or put the machine into service until the machine has been fully assembled and inspected for correct performance in accordance with the Owner’s Manual.
Read and understand the complete Owner’s Manual supplied with the machine before first use. Keep the Owner’s Manual for future reference.
FCC Compliance
Please note that the changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide a reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. -­Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --
Consult the dealer or an experienced radio/TV technician for help.
Read and understand the complete Owner’s Manual. Keep Owner’s Manual for future reference. Read and understand all warnings on this machine. If at any time the warning stickers become loose, unreadable or dislodged, contact Customer Service for replacement stickers.
There is a risk of explosion if the battery is replaced with an incorrect type. Dispose of used batteries according to the manufacturer's instructions.
Warranty Terms
For U.S. customers, to find the latest warranty terms go to the Schwinn® Equipment website at www.schwinnequipment.com. For customers outside the U.S. contact the distributor for your country and region for warranty terms.
Owner’s Manual
5
Features
REV
DATE
DESCRIPTION
ECO
BY
C
E
F
I
A
B
F
D
C
E
G
H
A Backlit LCD Display
B ON/OFF Button
C AVG/MAX Button
D Backlight Button
E STAGE Button
F Battery Level
G USB Port
H Battery Bay
Backlit LCD Display
During the workout, the multi-function, backlit LCD shows your workout measurements, results, user setup data and console diagnostics.
To turn on the backlight, push the Backlight button. The backlight turns off after 10 seconds to conserve the batteries. This backlight setting can be adjusted in the Service menu.
Heart Rate Monitor
The console receives heart rate data from the heart rate monitor (HRM).
The console can read heart rate data from an ANT+ 2.4GHz or Polar® compatible 5kHz wireless chest strap.
ANT+ 2.4GHz Wireless
The A
NT+ 2.4GHz Wireless Heart Rate Monitor (HRM) sends heart rate data to the
console after proximity linking occurs during the User Setup. The console can read the
Loading...
+ 11 hidden pages