Schwaiger HA102 User Manual

USER MANUAL

Home Automation Gateway

HA102

TABLE OF CONTENTS

1. IMPORTANT SAFETY INFORMATION ....................................... 4

2. DEVICE DESCRIPTION ...................................................5

3. INSTALLATION OF THE SCHWAIGER GATEWAY .............................6

3.1 WIFI CONFIGURATION OF THE GATEWAY .................................................................................................... 7

4. CONFIGURING SCHWAIGER HOME AUTOMATION SYSTEM .................. 8

4.1 INSTALL SCHWAIGER CLIENT APPLICATION ............................................................................................9

4.2 CREATE USER ACCOUNT ............................................................................................................................................ 9

4.2.1 Create user account by using client application ..............................9

4.2.2 Create user account by using web application ..............................10

4.3 ADD THE GATEWAY TO THE USER ACCOUNT .......................................................................................10

4.3.1 Add the gateway by using client application ................................11

4.3.2 Add the gateway by using web application .................................11

4.4 HOME SETUP ....................................................................................................................................................................... 12

5. DEVICE MANAGEMENT ..................................................13

5.1 MANAGE DEVICES BY USING CLIENT APPLICATION .......................................................................13

5.1.1 Add a device to the gateway ...............................................13

5.1.1.1 Z-Wave-specific information related to device inclusion .............15

5.1.2 Remove a device .........................................................15

5.1.3 Update device name and location ..........................................16

5.2 MANAGE DEVICES BY USING GATEWAY’S MAIN BUTTON .......................................................... 16

5.2.1 Add a device to the gateway ...............................................16

5.2.2 Remove a Z-Wave device ..................................................16

6. HA102 AS A PART OF OTHER Z-WAVE CONTROLLER’S NETWORK ............17

7. CONTROLLING AND MONITORING DEVICES ...............................17

7.1 DEVICES BY LOCATION ................................................................................................................................................17

7.2 DEVICES BY TYPE ..............................................................................................................................................................17

7.3 ADVANCED DEVICE CONFIGURATION .......................................................................................................... 18

8. SCENE MANAGEMENT ...................................................18

8.1 CREATE NEW SCENE ..................................................................................................................................................... 18

8.2 RUN THE SCENE ................................................................................................................................................................ 21

8.3 EDIT THE SCENE ............................................................................................................................................................... 21

8.4 DELETE THE SCENE ....................................................................................................................................................... 21

8.5 DISABLE THE SCENE ....................................................................................................................................................22

9. RESET CONFIGURATION ................................................22

9.1 RESET NETWORK CONFIGURATION .............................................................................................................. 22

9.2 RESET USER PREFERENCES ................................................................................................................................ 22

9.3 FACTORY RESET .............................................................................................................................................................22

10. BUTTONS/FUNCTIONS .................................................23

11. TECHNICAL DATA ......................................................23

12. DECLARATIONS OF CONFORMITY .......................................23

4

Congratulations and thank you for purchasing Schwaiger Home Automation
Gateway device. Below you will find useful operating guidelines.

WARNING!

The 5V port of this unit is to be connected only to the devices whose power feeding
meets the requirements for SELV (Safety Extra Low Voltage) and complies with Limited
Power Source according to IEC 60950-1.

1. IMPORTANT SAFETY INFORMATION

Before using Schwaiger Home Automation Gateway, please read the following information to avoid
any potential dangers:

1. Read the instructions carefully and follow the precautions in this manual. All mains connec­tions must be carried out by a trained and qualified person

2. Only use the original mains adaptor supplied with the device

3. Disconnect the device from mains (mains chargers) before cleaning. Clean device with a
damp cloth, do not use detergents

4. Do not use device in gas-filled environments

5. Do not place the device near heat sources

6. Do not expose the device to direct sunlight

7. Do not place cables and/or power supplies under heavy objects. Also, avoid routes near sharp
or abrasive objects and walkways

8. Keep out of reach of children

9. Do not carry out any maintenance on the device, instead contact your supplier

10. Make sure that ventilation slots and the cooling unit are not covered

11. As the device generates heat, this can lead to discoloration on the surface of furniture. Make
sure there is at least 10cm of clearance around the device

12. The device must not be located in the rooms with a high level of humidity e.g. kitchen, bath­rooms, etc.

13. Under no circumstances should you open the device or the mains adaptor. This must only be
carried out by a qualified engineer

14. Do not touch any contacts on the device with your fingers or metal objects. This could cause
a short circuit

15. Do not handle the device when your hands are wet due to risk of electric shock

5

2. DEVICE DESCRIPTION

Schwaiger home automation gateway takes central place in home automation system.
Combined with Schwaiger client (Android/iOS/HTML) applications and Schwaiger cloud service
it provides a turnkey platform that covers lighting, security, safety, energy management and other
aspects of the fast-growing home automation markets.

By supporting the most popular wireless communication protocols today (Zigbee, Z-Wave, IP),
Schwaiger gateway communicates with connected devices and enables users to monitor and con­trol their home.

Illustration 1: Schwaiger home automation gateway

Schwaiger home automation gateway consists of:

• MAIN button, which is used to manage home automation devices

• BACK button, which is used to reset user data, reset the gateway network, reboot the gateway

and reset the gateway to factory default settings

• LED indicator informs user about gateway status

• Power supply socket

• Ethernet

Use of these buttons is described in more detail in the corresponding section of this manual (page 23).

Main button

FRONT

BACK

Power supply socket Back button Ethernet

LED indicator

6

3. INSTALLATION OF THE SCHWAIGER GATEWAY

In order to install your Schwaiger gateway, please follow next steps:

1. Plug in the Home Automation Gateway to the AC power supply

2. Connect the Gateway to the home network router by using Ethernet ( Illustration 2) or WiFi
Connection (Illustration 3)

Illustration 2: Ethernet connection

Illustration 3: WiFi connection

In case you have connected your gateway device to the home network router by using Ether­net cable, the installation process is done and you can proceed to the Section 4 (Configuring the
Schwaiger home automation system).

7

3.1 WIFI CONFIGURATION OF THE GATEWAY

In case you would like to connect the gateway device to the home network router by using WiFi
connection, please follow next steps:

1. After powering up, the gateway enters AP (Access Point) mode if Ethernet cable is not con­nected. In AP mode LED will blink blue. In this mode gateway creates its own WiFi network
that allows the end user to configure it for connection to home network router over WiFi
(gateway’s SSID or network name is printed on the label on the back side of the device)

2. Connect your client device (PC, tablet or smart phone) to the WiFi network created by gateway

3. In web browser of your client device launch default IP address printed on the label on the
back side of the gateway (typically 192.168.1.1). Device information page should be displayed
as shown in Illustration 4

Illustration 4

4. In main menu select “WiFi configuration” page as shown in Illustration 5, after which gateway
should list all available WiFi networks in your home

Illustration 5

5. After selecting your home network router’s WiFi network, type in the password and press
“Apply” button to finish WiFi configuration of your gateway

6. Upon successful operation LED should go green indicating that your gateway is connected to
your home network router’s WiFi network. Otherwise, repeat the procedure starting from step 1

8

4. CONFIGURING SCHWAIGER HOME AUTOMATION
SYSTEM

Schwaiger Home Automation system consists of:

• Schwaiger client application

• Schwaiger home automation gateway

• Schwaiger cloud

Illustration 6: Our System

Schwaiger client application is intuitive and easy to use. Its comfortable graphical user interface will
smoothly guide users through the process of configuration of their space. The app can be used both
in-home or remotely – it is smart enough to connect to the gateway directly if possible, to ensure
the best user experience.

Schwaiger home automation gateway takes central place in home automation system.
Combined with Schwaiger client (Android/iOS/HTML) applications and Schwaiger cloud service
it provides a turnkey platform that covers lighting, security, safety, energy management and other
aspects of the fast-growing home automation markets.

Schwaiger cloud plays an important role in Schwaiger home automation system, since it enables
home control outside local network. Built around modern web technologies, it ensures the highest
security and robustness with the lowest latency in home automation communication chain. It also
allows monitoring and controlling of the home from any browser-based device.

Please follow next steps for configuring Schwaiger Home Automation system:

1. Install Schwaiger client application

2. Create user account

3. Add the gateway to the user account

4. Home setup