1-phase line filters
51 max.
71 max.
43 max.
89 max.
66 max.
(18)
(7)
(12)
(27)
60
±0.8
6.3
±0.2
5.3
±0.2
(27)
(12)
2)1)
3)
4 mm
2
6.3x0.8
1-stage filter for DC systems, dual pole, standard attenuation
FMEC
www.schurter.com/pg06_1
Description
- Chassis:
Screw-on, from top
- Line-filter in standard version, 1-stage, standard attenuation
- Effective against symmetrical and asymmetrical interferences in the
frequency range from 100kHz up to 30MHz
Approvals
- VDE License Number: 40020247
- UL License Number: E72928
Technical Data
Ratings IEC 5 - 30 A @ Ta 40 °C / ±80 VDC
Ratings UL/CSA 5 - 30 A @ Ta 40 °C / ±80 VDC
Dielectric Strength > 1.7 kVDC between Vss-GND
> 2.7 kVDC between Vss/GND-PE
Test voltage (2 sec)
Allowable Operation Temp. -25 °C to 100 °C
Climatic Category 25/100/21 acc. to IEC 60068-1
Protection Class Suitable for appliances with protection
class I acc. to IEC 61140
Terminal Quick connect terminals 6.3 x 0.8 mm
or screw terminals
Material: Housing Alu. anodised, UL 94V-0
Dimensions
Case 86-3
Characteristics
- Optimized for DC supplied applications
- Qualified for use in equipment according IEC/EN 60950
Other versions on request
- Other terminal combinations
- Version with wire connection
References
General Product Information
Weblinks
Approvals, RoHS, CHINA-RoHS, e-Store, SCHURTER-Stock-Check,
Distributor-Stock-Check
Line Filter Industrial Version, IEC 60939, IEC
60601-1, UL 1283, UL 544, EN 133
200, CSA C22.2 no. 8
Technical details
MTBF > 200'000 h acc. to MIL-HB-217 F
1) Line
2) Load
3) Tightening torque 0.6...0.8 Nm
EMC products
1
2
FMEC
2)1)
3)
4 mm
2
6.3x0.8
51 max.
71 max.
49 max.
110 max.
87 max.
(18)
(7)
(12)
(27)
60
±0.8
6.3
±0.2
5.3
±0.2
(27)
(12)
51 max.
71 max.
49 max.
113 max.
109 max.
87 max.
(18)
(7)
(12)
(27)
60
±0.8
6.3
±0.2
5.3
±0.2
(15)
M4
(27)
(12)
2)1)
3)
4 mm
2
4)
6.3x 0.8
4 mm
2
L
1)
2)
3)
Cx
R
Cx
R
+ Vss
GND
1)
L
Cy
Cy
Cy
Cy
+ Vss'
GND'
PE
2)
- Vss
- Vss'
Case 87-3
1) Line
2) Load
3) Tightening torque 0.6...0.8 Nm
1-phase line filters
www.schurter.com/pg06_1
Case 87-7
1) Line
2) Load
3) Tightening torque 0.6...0.8 Nm
4) Tightening torque 1.2...1.4 Nm
Terminal options
1) Quick connect terminals 6.3x0.8 (only up to 24A)
2) Screw clamp 4mm²
3) Flexible wires
Diagrams
1) Line
2) Load
EMC products
1-phase line filters
FMEC
www.schurter.com/pg06_1
Attenuation Loss
Standard version
- - - - differential mode _____ common mode
5 A 10 A 15 A 20 A
24 A 30 A
Variants
Rated Current
[A]
5 3 x 0.75 100 100 1 245 86-3 10 5500.2229
10 3 x 0.2 100 100 1 245 86-3 10 5500.2230
15 3 x 0.1 100 100 1 250 86-3 10 5500.2231
20 3 x 0.07 100 100 1 260 86-3 10 5500.2232
24 3 x 0.14 100 100 1 400 87-3 4 5500.2233
30 3 x 0.08 100 100 1 425 87-7 4 5500.2234
L [mH] Cx (X2) [nF] Cy (Y2) [nF]
R [MW]
Weight
[g]
Case Packaging unit
Distributor-Stock-Check | SCHURTER-Stock-Check | e-Store
Order Number
The specifications, descriptions and illustrations indicated in this document are based on
current information. All content is subject to modifications anamendments.
EMC products
3
Loading...