SCHURTER FMEB Technical data
1-phase line filters
(20)
71 max.
32 max.
89 max.
66 max.
(3.5)
(12)
(27)
60
±0.8
6.3
±0.2
5.3
±0.2
(27)
(12)
51 max.
2)1)
3)
4 mm
2
6.3x0.8
1-stage filter for DC systems, single pole, standard attenuation
FMEB
www.schurter.com/pg06_1
Description
- Chassis:
Screw-on, from top
- Line-filter in standard version, 1-stage, standard attenuation
- Effective against symmetrical and asymmetrical interferences in the
frequency range from 100kHz up to 30MHz
Approvals
- VDE License Number: 40021953
- UL License Number: E72928
Technical Data
Ratings IEC 5 - 30 A @ Ta 40 °C / 80 VDC
Ratings UL/CSA 5 - 30 A @ Ta 40 °C / 80 VDC
Dielectric Strength > 1.7 kVDC between Vss-GND
> 2.7 kVDC between Vss/GND-PE
Test voltage (2 sec)
Allowable Operation Temp. -25 °C to 100 °C
Climatic Category 25/100/21 acc. to IEC 60068-1
Protection Class Suitable for appliances with protection
class I acc. to IEC 61140
Terminal Quick connect terminals 6.3 x 0.8 mm
or screw terminals
Material: Housing Alu. anodised, UL 94V-0
Dimensions
Case 85-2
Characteristics
- Optimized for DC supplied applications
- Qualified for use in equipment according IEC/EN 60950
Other versions on request
- Other terminal combinations
- Version with wire connection
References
General Product Information
Weblinks
Approvals, RoHS, CHINA-RoHS, e-Store, SCHURTER-Stock-Check,
Distributor-Stock-Check
Line Filter Industrial Version, IEC 60939, IEC
60601-1, UL 1283, UL 544, EN 133
200, CSA C22.2 no. 8
Technical details
MTBF > 200'000 h acc. to MIL-HB-217 F
1) Line
2) Load
3) Tightening torque 0.6...0.8 Nm
EMC products
1
2
FMEB
2)1)
3)
4 mm
2
6.3x0.8
51 max.
71 max.
43 max.
89 max.
66 max.
(18)
(7)
(12)
(27)
60
±0.8
6.3
±0.2
5.3
±0.2
(27)
(12)
51 max.
71 max.
43 max.
88 max.
66 max.
(12)
(27)
60
±0.8
6.3
±0.2
5.3
±0.2
(27)
(12)
2)1)
3)
4 mm
2
6.3x 0.8
4 mm
2
L
1)
2)
3)
Cx
R
Vss
GND
1)
L
Cy
Cy
Vss'
GND'
PE
2)
Case 86-2
1) Line
2) Load
3) Tightening torque 0.6...0.8 Nm
1-phase line filters
www.schurter.com/pg06_1
Case 86-6
1) Line
2) Load
3) Tightening torque 0.6...0.8 Nm
Terminal options
1) Quick connect terminals 6.3x0.8 (only up to 24A)
2) Screw clamp 4mm²
3) Flexible wires
Diagrams
1) Line
2) Load
EMC products
Loading...