Schneider Electric Room
Controllers bridge the gap
between the cost of stand-alone
thermostats, and the performance
of DDC systems, by simplifying
installation and commissioning,
to control Rooftop units, fan coil
units, terminal units and heat
pump applications, for a wide
variety of facilities.
CommercialHealthcareRetailHotelsEducation
Schneider ElectricSE8000 & SE7000 Series room controllers
SE8000 or SE7000
Common features
3
Easy to install
No need to interrupt operations
when installing room controllers.
You can re-use existing wiring or
communicate wirelessly to sensors
and gateways, thereby lowering
installation costs and keeping
downtime in check.
Precise comfort
Room controllers look like
thermostats, but work like
controllers. They deliver the optimal
level of comfort while maximizing
savings on energy and operational
costs.
Easy to commission
No need for software or other tools.
Commissioning is done by
configura-tion through the user
interface of the room controller,
thereby saving on engineering time
and cost.
Powerful control
Get the most out of your HVAC
systems with the application-specific
control and PID algorithms native
to room controllers. You can also
optimize your space by using the
optional ccupancy detection and
Optional on-board relative
humidity sensor
scheduling features.
Easy to scale
The native connectivity of room
controllers enables upstream
connection to a wide variety of
Building Management Systems
(BMS), and downstream connection
to wired and wireless sensors.
Significant savings
Room controllers provide an
accelerated return on investment
with savings at all levels: installation,
commissioning, energy optimization,
and maintenance.
Optional on-board
PIR motion sensor
The power to choose
for customers who
need more.
Over 70 design combinations with selectable
>
casings, fascias, and display color schemes, to
match any décor.
Customizable user interface, selectable
>
languages, and advanced BACnet messaging
for an unparalleled guest experience.
SmartStruxure™ Lite solution ................... 30
Wireless serial adapters
Wireless accessories
Covers
Remote sensors
Wireless communication adapator
Wireless sensors
Specifications
Remote sensor specs
.................................... 17
.................................... 18
.................................... 19
............................... 20
........................ 21
................................... 23
................................... 26
................................... 26
................................... 27
.................................. 28
.......... 30
....................... 31
......................... 32
.................................... 33
.............................. 33
.............. 33
............................. 34
............................... 35
......................... 35
Relay Packs
Relay packs
SC1300
SC2300
Not all products in the c atalogue m ay be available i n every country, please ch eck availabil ity with th e local Schn eider Elect ric offic e.
Schneider Electric SE8000 & SE7000 Series room controllers
................................ 37
.................................... 38
.................................... 38
5
Reduce energy
waste & improve
comfort.
Accelerate your return on investment
with easy to install and commission
room controllers
6
Cost-saving, energy-saving applications
From hotels and hospitals to schools, retail, and commercial buildings, Schneider Electric offers
wide-ranging room control solutions for your building management needs. Whether retrofitting
current systems with a more technologically advanced room controller or going green with a more
environmentally friendly option, Schneider Electric has the ideal, cost-competitive solution. Our
room controllers can be equipped with an integrated passive infrared motion sensor for demandbased occupancy control that opens up new opportunities in smart energy management.
Open
communications
Advance control of
your building with
truly open, integrated
communications.
Open protocol options
include ZigBee®
wireless, and BACnet®
infrastructure.
Lower total install cost
Accelerate your return
on investment by saving
time and resources
from the beginning. Our
easy-to-install systems
integrate into any new or
existing building, with no
requirement for costly,
specialised labor.
Efficient control
Take full control of
your building’s HVAC
equipment. We’ll make
it simple with intuitive,
application-based
products specifically
designed for your
needs.
Occupancy sensing
Equip your room
controller with an
integrated passive
infrared motion sensor
for demand-based
occupancy control that
raises your energy
efficiency to a whole
new level.
Energy savings
Save energy. Save
money. With our series
of room controllers
you’ll reduce energy
costs without sacrificing
comfort one bit.
Temperature and
humidity sensing
Deliver efficient,
measurable control.
If you can measure it,
you can control it —
providing more precise
occupant comfort
and productivity.
Schneider Electric SE8000 & SE7000 Series room controllers
SE8000 Series Room Controllers
8
SER8300 Series (with
SC3000)
SE8300 SeriesSE8600 Series
>
Line voltage fan coil units
>
Low voltage fan coil units
>
Mixed voltage fan coil units
>
Zone control
>
Rooftop units
>
Heat pumps
>
Indoor air quality
Line voltage fan coil units
• Requires SC3000 relay pack
• Fan speed and sequence of operation
• Two pipe
• Four pipe
Low voltage fan coil units
• Fan speed and sequence of operation
• Two pipe
• Four pipe
Mixed voltage fan coil units
• Requires SC1300/SC2300 relay pack
Zone control
• Cooling only VVT zone with reheat
• Fin-tube radiators
• Cabinet heaters
• Radiant panel heaters
• Electric re-heat zones
• Pressure dependent VAV system
• Terminal reheat
Rooftop units, heat pumps and
indoor air quality
• Economizer
• CO2 sensor input
• Fresh Air Station input
Configurable stages
• 1 heat/1 cool
• 2 heat/2 cool
• Modulation heat/2 cool
• 3 heat/2 cool
The perfect balance between simplicity and sophistication
The SE8000 Series is a sophisticated addition to the Schneider Electric product portfolio of
room controllers. With rich, customizable features, the SE8000 Series enables significant energy
savings with accurate temperature control in any space. The SE8000 room controllers can be
easily integrated into most Building Management Systems (BMS).
Configurable languages
Configurable color schemes
Configurable user interface
Schneider Electric SE8000 & SE7000 Series room controllers
Common features
• Configurable sequence of operations
• BACnet COV
• Scheduler
• Programmable with Lua4RC to modify control
sequences or override inputs and outputs
• Optional on-board relative humidity sensor with
dehumidification control sequences
• Optional on-board PIR motion sensor with
occupancy-based control sequences
Orderable Fascias
9
Digital stand-alone and communicating room controllers
SER8300 | Line-voltage fan coil controller with SC3000 relay pack
This two component retrot option consists of the SER8300 terminal equipment controller and the SC3000 relay pack. Together, they provide
an easy solution for retrotting fan coil unit thermostats without requiring other components such as relays, transformers, controllers, sensors,
and network wiring to be upgraded. Existing line voltage wiring between the fan coil unit and temperature Controller can be reused fur ther
minimizing overall labor and installation costs for both retrot and new construction control projects. Additional exibility and energy savings can
be achieved with optional wireless door and window switches. An elegantly simple casing combines with congurable screen colors to match
decor. Display your own logo and custom messages on screen to reinforce your brand and provide a more enjoyable occupant experience.
Product highlights
• Elegant style combinations, designed to complement any decor
• Customizable color digital touch screen interface with
multi- language support
• 2 Pipe or 4 Pipe conguration
• Line voltage applications
• On board conguration interface utility
• Alarm monitoring
• Suitable for both commercial and hospitality markets and systems
• Fully programmable control sequences using scripting
• Congurable fan sequence of operation
• Congurable scheduler
• Change of value (COV) function for BMS integration
• Humidity sensor with on-board dehumidication strategy
(model dependent)
• Congurable I/O
• Optional PIR motion sensor
• Advanced occupancy functions for commercial and
lodging applications
• Optional wireless door and window switches available for wireless
communicating models only
Communication
• ZigBee Pro (P) option for direct MPM integration (Optional with
communication module purchased separately)
Description
Dimension
Height: 12cm/4.72in /
Width: 8.6cm/3.38in /
Depth: 2.5cm/1in
Power
Voltage (SER8000)6.5 - 28 Vdc or 20 - 28 Vac,
50/60Hz / 2.4 watts minimum
Voltage (SC3000)90 - 277 Vac universal, 50/60Hz
Communication
ProtocolStand-alone, BACnet MS/TP,
ZigBee Pro
Part NumberDescriptionBACnet MS/TP
SER8300A0B00Line volt age fan coil C ontroller
SER8350A0B00Line volt age fan coil Controlle r
SER8300A5B00Line volt age fan coil C ontroller
SER8350A5B00
SE R8300A0 B11Line volt age fan coil C ontroller
SER8350A0B11Line voltage fan coil Controller
SE R8300A5 B11Line volt age fan coil C ontroller
SER8350A5B11
Line volt age fan coil C ontroller
Line volt age fan coil C ontroller
• BACnet MS/TP (B) (Optional with BACnet integration
purchased separately)
• Network-ready Stand-alone (A)
• Modbus (B) (selectable)
Facias
This model can be ordered with silver or white Fascia, and can be
customized with many different Fascias. Refer to the Fascia page for
more information (later in this document).
Accessories
The SC3000 relay pack is a necessary accessory for retrot solution
to use with the SER8300 room controller. Refer to the SC3000 page
for more information (later in this document).
Wireless communication module ZigBee Pro upgrade available for
this room controller. Ordered separately. Refer to the ZigBee Pro
page for more information (later in this document).
CO2 sensor module.
X
X
X
XXX
X
X
X
XXX
RH sensor &
control
X
X
PIR motion sensor
X
X
Fascia & casing
Silver
Silver
Silver
Silver
White
White
White
White
10
SE8300 | Low voltage fan coil controller and zone controller
Smart energy management has never been easier than with the SE8300 series Fan coil room controllers. Designed for new construction and
retrot projects, the room controllers dramatically decrease project delivery costs by reducing installation, conguration and commissioning
time. No complex software or tools are required to customize functionality to meet your applications requirements. The room controllers
provide all the advanced features and monitoring functions required by modern building automation systems in a simple compact enclosure. An
elegantly simple casing combines with congurable screen colors to match decor. Display your own logo and custom messages on screen to
reinforce your brand and provide a more enjoyable occupant experience.
Product Highlights
• Elegant style combinations, designed to complement any decor
• Touch screen inter face with multi-language support
• 2 Pipe or 4 Pipe conguration
• Suitable for both commercial and hospitality markets and systems
• Fully programmable control sequences using scripting
• On board conguration interface utility
• Congurable fan sequence of operation
• Congurable Scheduler.
• Change of value (COV) function for BMS integration.
• Humidity sensor with on-board dehumidication strategy
(model dependent)
• Optional PIR motion sensor
• Advanced occupancy and scheduling functions for commercial
and lodging applications
• Optional wireless door and window switches (with optional
ZigBee Pro® card) available
Description
Dimension
Height: 12cm/4.72in
Width: 8.6cm/3.38in
Depth: 2.5cm/1in
Power
Voltage
6.5 - 28 Vdc or 20 - 28 Vac
50/60Hz / 4VA + Output Load
(64 VA Max.)
Communication
ProtocolBACnet MS/TP
ZigBee Pro /w VCM8000V5045P
Communication
• ZigBee Pro (P) opiton for direct MPM integration
(Optional with communication module purchased separately)
• BACnet MS/TP (B) (Comes standard on all models)
• Modbus (B) (selectable)
Facias
This model can be ordered with silver or white Fascia, and
can be customized with many dif ferent Fascias. Refer to the
Fascia page for more information (later in this document).
Accessories
Wireless communication module ZigBee Pro upgrade available for this
room controller. Ordered separately, refer to the ZigBee Pro page for
more information (later in this document).
CO2 sensor module.
Part NumberDescriptionBACnet MS/TP
SE8300U0B00Low volt age fan coil C ontroller
SE8350U0B00Low voltage fan coil Controller
SE8300U5B00Low voltage fan coil Controller
SE8350U5B00
SE8300U0B11Low voltage fan coil Controller
SE8350U0B11Low voltage fan coil Controller
SE8300U5B11Low voltage fan coil Controller
SE8350U5B11
Low voltage fan coil Controller
Low voltage fan coil Controller
XSilver
X
X
XXXSilver
XWhite
X
X
XXXWhite
RH sensor &
control
X
X
PIR motion sensor
X
X
Fascia & casing
Silver
Silver
White
White
Schneider Electric SE8000 & SE7000 Series room controllers
11
Digital stand-alone and communicating room controllers
SE8600 | Rooftop unit, heat pump and indoor air quality room controller
Smart energy management has never been easier than with the SE8600 room controllers for Rooftop units, heat pumps and indoor air quality
applications. Designed for new construction and retrot projects, the room controllers dramatically decrease project delivery costs by reducing
installation, conguration and commissioning time. No complex software or tools are required to customize functionality in order to meet your
applications requirements. The room controllers provide all the advanced features and monitoring functions required by modern building
automation systems in a simple compact enclosure. An elegantly simple casing combines with congurable screen colors to match decor.
Display your own logo and custom messages on screen to reinforce your brand and provide a more enjoyable occupant experience.
Product highlights
• Elegant style combinations, designed to complement any decor
• Customizable color digital touch screen interface with
multi-language support
• Congurable as 1H / 1C, 2H / 2C, 3H / 2C and Modulating
(Analog) Heat / 2C for Rooftop units
• CO2 and fresh air inputs for Indoor Air Quality (IAQ) applications
• Suitable for both commercial and hospitality markets and systems
• Fully programmable control sequences using scripting
• On board conguration interface utility
• Congurable sequence of operations
• Congurable Economizer
• Congurable Scheduler
• Change of value (COV) function for BMS integration
• Humidity sensor with on-board dehumidication strategy
• Advanced occupancy functions for commercial and
lodging applications
• Optional wireless motion sensors, door and window switches
(with optional ZigBee Pro® card) available
Description
Dimension
Height: 12cm/4.72in
Width: 8.6cm/3.38in
Depth: 2.5cm/1in
Communication
• ZigBee Pro (P) opiton for direct MPM integration
(Optional with communication module purchased separately)
• BACnet MS/TP (B) (Comes standard on all models)
• Modbus (B) (selectable)
Power
Voltage
Communication
ProtocolBACnet MS/TP
28 Vdc or 20 - 28 Vac
50/60Hz / 4VA + Output Load
(64 VA Max.)
ZigBee Pro /w VCM8000V5045P
Facias
This model can be ordered with silver or white Fascia, and can be
customized with many different Fascias. Refer to the Fascia page for
more information (later in this document).
Accessories
Wireless communication module ZigBee Pro upgrade available for
this room controller. Ordered separately, refer to the ZigBee Pro page
for more information (later in this document).
CO2 sensor module.
Part NumberDescriptionBACnet MS/TP RH sensor & control
SE8600U0B00RTU, Heat pump & IAQ Controller
SE8650U0B00RTU, Heat pump & IAQ Controller
SE8600U5B00RTU, Heat pump & IAQ Controller
SE8650U5B00
SE8600U0B11RTU, Heat pump & IAQ Controller
SE8650U0B11RTU, Heat pump & IAQ Controller
SE8600U5B11RTU, Heat pump & IAQ Controller
SE 86 50U5B 11
RTU, Heat pump & IAQ Controller
RTU, Heat pump & IAQ Controller
X
X
X
XXX
X
X
X
XXX
X
X
PIR motion
sensor
X
X
Fascia & casing
Silver
Silver
Silver
Silver
White
White
White
White
12
Wireless communication adapter
SE8000 room controllers can be adapted to communicate using the ZigBee Pro wireless mesh
networking protocol by the addition of an adapter card. This allows the SE8000 room controllers
to pair with a variety of wireless sensors and switches for more precise control of HVAC systems
in response to occupancy, as well as to communicate wirelessly for integration with BMS and
networks.
Part NumberDescriptionCompatibility
VCM8000V5045PWireless ZigBee Pro communication cardSE8000 room controllers
Part NumberDescriptionCompatibility
VCM8001V5045Wireless CO2 sensor moduleSE8000 room controllers