Schneider Electric SE7600E Series Specifications

Room controllers

SE7600E Series

Indoor air quality (IAQ) controller

Most people spend up to 90 per cent of their time
indoors. A large portion of that time is dedicated
to a working environment in a commercial
building. Studies conducted by the Environmental
Protection Agency (EPA) show indoor air can
contain levels of pollutants that are actually higher
than levels found outdoors.

In light of this, indoor air quality has become
a major concern to businesses, building
managers, tenants, and employees because of
its direct impact on the comfort, well-being, and
productivity. Not all buildings have severe indoor
air-quality issues, yet even well-run buildings can
experience episodes of poor indoor air quality.

The Schneider Electric
along with a CO
capable of controlling economiser-free cooling
and IAQ demand-based ventilation strategy while
providing a fresh air measurement input right out
of the box. The Schneider Electric IAQ controller
replaces the need for custom programmed DDC
controllers and sensors to achieve the same
results as in the past. When connected to a
building automation system, the Schneider Electric
IAQ controller can monitor and verify CO
air levels, ensuring air quality and energy efficiency
is optimised.

™

SE7600E IAQ controller,

sensor, is a cost-effective solution

2

and fresh

2

While primarily designed for use in small to
midsized commercial building applications such as
office buildings or schools, the Schneider Electric
IAQ controller can be installed in any other building
type currently using a standard packaged rooftop
or heat pump unit with a requirement for fresh
air control. The Schneider Electric IAQ controller
provides a simple, cost-effective solution. It
offers advanced pre-programmed sequences of
operations that can be installed without special
software, tools, or the presence of a network.
This greatly reduces the installation cost and
commissioning complexity while providing control
functions immediately when powered on.

Further energy saving benefits can be achieved
with the use of a local onboard passive infrared
(PIR) motion sensor that can automatically detect
local activity. This allows the IAQ to be controlled
only when occupants are present, thus saving on
unnecessary energy costs. This functionality along
with configurable night setback features makes it
an economical yet highly effective control solution.
This brings IAQ control and energy saving features
in one simple yet powerful package that is network
ready, BACnet

®

, or ZigBee® wireless compatible.

01

Room controllers

Features Benefits

Controls IAQ with any remote return duct or wall-mounted
CO2 sensor

Being able to control IAQ means healthier and more productive occupants

Controls and measures fresh air with any third-party fresh
air measurement station

Meets new IAQ requirements and regulations for LEED type buildings

Embedded free cooling economiser loop

True energy savings with adjustable economiser control loop; minimum fresh air can
be measured and controlled with the fresh air measurement station

One small, compact thermostat-like controller

Provides a simple-to-install, cost-effective package; easy thermostat-like operation
for the end user

Network-ready functionality built in

Allows for future network functionality along with remote monitoring of all critical
system data points for sustainability

Passive infrared (PIR) sensor cover available as
an accessory

Further energy savings is possible with the use of a local passive infrared (PIR)
sensor cover to automatically detect local occupancy; IAQ is maintained and
controlled only when occupants are present to save energy costs

Features and benefits

Indoor air quality (IAQ) controller

02

Typical application

Fresh air measurement station

Outside air sensor

Outside air

Return air

CO2

sensor

Open communication protocols

BACnet

FanCooling coil

Control

board

Heating coil

Supply air

Supply air sensor

Optional wireless
ZigBee communication