Schneider Electric SE7600 Specifications

Compatible with

SmartStruxure™ solution
SmartStruxure Lite solution

Room Controller

SE7600 Rooftop Unit and Heat Pump
Controller

The SE7600 room controller is specifically designed for single stage and
multi-stage control of heating/cooling equipment such as rooftop and
selfcontained units. The device features an intuitive, menu-driven, back-lit LCD
display, which walks users through the programming steps, making the process
extremely simple. Accurate temperature control is achieved due to the PI time
proportional control algorithm, which virtually eliminates temperature offset
associated with traditional, differential-based thermostats.

Schneider Electric | SDS-SE7600-EN.A 4.08.2015.v2 August 2015

SE7600 RTU and HP Room Controller Features

When compared to traditional building automation Room
Controllers, the SE7600 series roof top and heat pump
wall mounted Room Controllers provide unmatched
return on investment to building owners while maximizing
profits for system integrators

Introduction

Smart energy management has never been easier than with the SE7600
series roof top and heat pump room controllers. Designed for new
construction and retrofit projects, the controllers dramatically decrease total
installed costs by reducing installation, configuration and commissioning
time. No complex software or tools are required to customize functionality
to meet your applications requirements. They provide all advanced features
and monitoring functions required by modern building automation systems
in a simple, “thermostat like” enclosure.

The SE7600 series offers control of staged heating and cooling equipment
such as packaged roof top units and heat pumps for commercial buildings.
Advanced models are available with built-in economizer or humidity
strategies.

AT A GLANCE

Custom design

• Advanced occupancy functions

• Equipt for optional PIR cover

• 2 digital inputs

• Smart fan operation

• Unique configuration key with password

• Lockable keypad

• 6 hour reservable time for clock

• Remote room and outdoor temperature sensor

• Auxiliary output

• Discharge air sensor

• Intuitive menu-driven programming

Options and accessories

• Intuitive menu-driven programming

• Economizer output 0-10 Vdc

• 3Heat/2Cool for heat pump models

Open protocol design provides network compatibility to BACnet
MS/TP, LonWorks
Network Ready“ stand-alone” versions can be field retrofit with optional
communication modules which enable the controllers to be integrated
into most building automation systems as budgets allow or as the building
requirements change.

All models can be customized with PIR motion sensor functionality via an
optional PIR accessory cover. The cover can be installed in the field or
ordered as a factory installed option. This provides advanced occupancy
routines and automatic energy savings during occupied periods without
sacrificing occupant comfort.

Product Highlights

• Open protocol allows for easy integration into most network systems

• Network Ready models can be retrofit with optional communication
modules

• One simple wall mounted device to install, wire and commission

• Intuitive “thermostat like” interface

• Application specific controllers can be configured to meet most
applications

• No special software required for configuration

• Fully embedded local configuration utility

• Occupancy and monitoring functions through PIR cover

• Available with or without 7 day scheduling

• Single-stage, multi-stage and heat pump models available

• Available with economizer control

®

and Wireless ZigBee Pro® network systems. Our

2

®