Schneider Electric SE7300 Data Sheet
Compatible with
SmartStruxure™ solution
SmartStruxure Lite solution
Room Controller
SE7300 Low Voltage Fan Coil
Controller
The SE7300 fan coil controllers are specifically designed to provide exceptional
temperature control of multi-speed fan coil units with either on/off, floating or
0 to 10 Vdc valves. Also available are advanced models with built-in relative
humidity (RH) sensing and dehumidification strategies.
Schneider Electric | SDS-SE7300-EN.A4.08.2015.v2 August 2015
SE7300 Series room controller Features
Smart energy management has never been easier than with
the SE7300 series fan coil controllers. Designed for new
construction and retrofit projects, the controllers dramatically
decrease total installed costs by reducing installation,
configuration and commissioning time. The SE7300 series
provides advanced features and monitoring functions required
by modern building automation systems without the use of
software and commissioning tools.
Introduction
The SE7300 fan coil controllers are specically designed to provide
exceptional temperature control of multi-speed fan coil units with either onoff, oating or 0 to 10 Vdc valves. Also available are advanced models with
built-in relative humidity (RH) sensing and dehumidication strategies.
Open protocol design provides network compatibility to BACnet® MS/TP,
LonWorks® and Wireless ZigBee Pro® network systems. Our Network
Ready “stand-alone” versions can be upgraded with optional communication
modules which enable the controllers to be integrated into most building
automation systems as building requirements change.
All models can be customized with PIR motion sensor functionality via an
optional PIR accessory cover. The cover can be installed in the eld or
ordered as a factory installed option. This provides advanced occupancy
routines and automatic energy savings during occupied periods without
AT A GLANCE
sacricing occupant comfort.
• Open protocol allows for easy integration into
any network system
•
Network Ready models can be retrofit in the
field with optional communication modules
•
One simple wall mounted device to install, wire
and commission
• Familiar “thermostat like” look and feel
•
Application specific controllers can be
configured to meet most used applications
• No special software required for configuration
• Fully embedded local configuration utility
•
Factory installed PIR sensor or PIR ready
controller
• Advanced occupancy and monitoring functions
• Simplified user interface
•
Hospitality and commercial models available
with market specific HMI
When compared to traditional building automation controllers, the SE7300
series provides unmatched return on investment to building owners while
maximizing prots for system integrators.
Loading...