Schneider Electric HDP5000 Data Sheet
HDP5000 High Definition Printer/Encoder
Print Method: HDP Dye-Sublimation / Resin Thermal Transfer
Resolution: 300 dpi (11.8 dots/mm)
Colors: Up to 16.7 million / 256 shades per pixel
• Full-color, YMC*, 750 prints
• Full-color with resin black, YMCK*, 500 prints
Print Ribbon Options:
HDP Film Options: • Clear (1,500 prints)• Standard Holographic (500 prints) • Custom Holographic, special order (500 prints)
Overlaminate Options:
Print Speed:**
Accepted Standard Card Sizes: CR-80 (3.370”L x 2.125”W / 85.6mmL x 54mmW)
Accepted Card Thickness:
Input Card Cartridge Capacity: 100 cards (.030” / .762mm)
Output Hopper Card Capacity: 200 cards (.03 0” / .762mm)
Single Wire USB 2.0 Encoding
System Requirements: • x86 based PC or compa tible, Wind ows 2000, Wind ows XP, Windows 2 003, or Windows Vista, 500MHz compute r with 256MB of RAM or hi gher, 500MB free hard disk space or higher
Operating Temperature: 65° to 90° F / 18° to 32° C
Fargo Secure Materials:
Print Area: Over-the-edge on CR-80 cards
Accepted Card Types:
Card Cleaning: Replaceable cleaning roller (included with each print ribbon)
Memory: 16MB RAM
Display: User-friendly, SmartScreen™ LCD Control Panel
Software Drivers: Windows® 2000 / XP / Server 2003 / Vista (32 bit); Mac OS X v10.4 / v10.5; and Linux****
Options:
Interface:
Supply Voltage: 100-240 VAC, 3.3 A
Humidity: 20 - 80% non-condensing
Dimensions:
Weight:
Agency Listings:
Supply Voltage:
Supply Frequency: 50 Hz / 60 Hz
Warranty: • Printer – Two years including one year of free printer loaner support (U.S. only); optional Extended Warranty Program (U.S. only), Printhead – Lifetime; unlimited pass
Options:
Software:
• Full-color with two resin black panels, YMCKK*, 500 prints,
• Full-color with resin black and heat seal panel for dicult-to-print surfaces, YMCKH*,
500 prints
• Thermal Transfer Overlamina te, .25 mil thick, 500 prints
• PolyGuard® Overlaminate, 1.0 mil and .6 m il thick, 2 50 prints (PolyG uard available in a CR-80 patch size)
All overlaminate s available in c lear, standard hologr aphic design or custom ho lographic des ign
Batch Mode:
• 26 seconds per card / 138 cards per hour (YMC with transfer)*
• 32 seconds per card / 113 cards per hour (YMCK with transfer)*
• 47 seconds per card / 77 cards per hour (YMCKK with transfer)*
• 37 seconds per card / 97 cards per hour (YMCK with transfer and dua l-sided, simultaneous l amination)*
• 55 seconds per card / 65 cards per hour (YMCKK with transfer and du al-sided, simultaneous lamination)*
• Print only: .030” (30 mil) to .050” (50 mil) / .762mm to 1.27mm
• Print/Lamination: .030” (30 mil) to .050” (50 mil) / .762mm to 1.27mm
ABS, Laminated PVC, PET, PETG, proximity, smart and mag stripe cards, optical memory cards
Note: ABS and PVC cards are not recommended for use in the HDP5000 Lamination Module.***
• ISO Magnetic Stripe Encoding, dual high- and low-coercivity, Tracks 1, 2 and 3
• Contactless Smart Card Encoder (HID iCLASS and MIFARE)
• Contact Smart Card Encoder reads from and writes to all ISO7816-1/2/3/4 memory and microprocessor smart cards (T=0, T=1) as well as synchronous cards
• Prox Card Reader (HID read-only)
USB 2.0 (high speed) and Ethernet with internal print ser ver
• HDP5000: 11.50”H x 12.25”W x 9.25”D / 292mmH x 313mmW x 235mmD
• HDP5000 + Dual-Sided Module: 11.50”H x 17.50”W x 9.25”D / 292mmH x 445mmW x 235mmD
• HDP5000 + Single-Sided Lam Module: 12.75”H x 25”W x 9.25”D / 324mmH x 635mmW x 235mmD
• HDP5000 + Dual-Sided Module + Dual-Sided Lam Module: 12.75”H x 30”W x 9.25”D / 324mmH x 762mmW x 235mmD
• Lam Module: 12.75”H x 12.25”W x 9.25”D / 324mmH x 313mmW x 235mmD
• HDP5000: 1 6 lbs. / 7.3 kg, HDP5000 + Dual-Sided Module: 22 l bs. / 10 kg, HDP5000 + Si ngle-Sided Lam Module: 28 lbs. / 12.7 kg, HDP5000 + Dual-Sided Module + Dua l-Sided Lam
Module: 36 l bs. / 16.4 kg
• Safety: UL 60950, CSA C2.2 No 60950, CB report (EN 60950), and CE mark
• EMC: FCC Part15 Class A, EN 55022: 1998 Class A , CRC c1374, EN 61000-3-2: 2000,EN 61000-3-2: 1995, EN 55024: 1998, CE mark, and CCC mark
100-240 VAC, 3.8A
Fargo Card Printer/Encoders require highly specialized media to function properly. To maximize printedcard quality and durability, printhead life and printer/encoder reliability, use only Fargo
Secure Materials.
Fargo warranties are void, where not prohibited by law, when non-Fargo Secure Materials are used.
• Card Lamination Module – single-sided or dual-sided (simultaneous)*** • Magnetic stripe encoding • 200-card input hopper • Smart card encoding (contact/contactless) • Dual-sided printing
• Door and cartridge locks • Printer cleaning kit
Fargo Workbench Diagnostic Utility
* Indicates the ribbon type and the number of ribbon panels printed where Y=Yellow, M=Magenta, C=Cyan, K=Resin Black, I=Inhibit, F=Fluorescing, H=Heat Seal
** Print speed indicates an approximate print speed and is measured from the time a card drops into the output hopper to the time the next card drops into the output hopper. Print speeds do not include encoding time or the
time needed for the PC to process the image. Process time is dependent on the size of the file, the CPU, amount of RAM and the amount of available resources at the time of the print.
*** ABS and PVC cards are not recommended for use in the HDP5000 Lamination Module. (Free card proofing available. Please contact your local integrator for more information.)
**** Linux versions: Ubuntu 7.10, Red Hat Enterprise Desktop 5, Fedora Core 7, Fedora Core 8, openSUSE 10.3.
This data sheet is for informational purposes only. HID Global makes no warranties, expressed or implied, in this summary. Company and product names and data used in sample output are fictitious. Specifications are subject
to change without notice. Fargo and Asure ID are registered trademarks of HID Global in the U.S. and/or other countries. All other trademarks, service marks, and product or service names are trademarks or registered
trademarks of their respective owners. This is not an offer of sale. © 2009, HID Global Corporation. All rights reserved. REV09B
ACCESS experience.
• Full-color with resin black and inhibit panel for signature or other non-printing areas,
YMCKI*, 500 prints
• Full-color with fluorescing and resin black, YMCFK*, 500 prints
• Resin black, K, 3000 prints
Loading...