Schlage LE162 Installation Instructions & User Manual

1

Installation Instructions & User Guide:

Wireless Keypad Lock LE162

Keep the below information in a safe and secure place for future reference.

IMPORTANT INFORMATION

Lock Programming Code

Six (6) digits

For security reasons, this code is chosen randomly and not held
on any database. If this code is lost, Customer Support will be
unable to assist. It is suggested you hold this code in a safe and
secure location, or change the code to your own, unique number.

FOLD

PLEASE NOTE

MANUAL PROGRAMMING FUNCTIONS

• Pressthekeysonthekeypadasshowninthefollowingsteps.

• Waitfortheconrmationindicatorbeforeproceedingtothenextstep.

• Ifyoumakeamistake,waitforalllightsandbeepstostopandthenstartoverfromthebeginning.

PC-ProgrammingCode(seepage16)

UC-UserCode(seepage16)

1 Enable All U ser Codes funct ion is available only w hen user codes are cu rrently disable d.

2 Delete A ll User Codes func tion will remove ALL u ser codes, but wil l not change the progr amming code. User Co des cannot be recov ered after this fun ction is complete d.

If an incorrect code is entered, the LED will ash red twice and beep twice.

Add

UserCode

Enter Programming Code

(Six Numbers)

Enter Programming Code

(Six Numbers)

Enter Programming Code

(Six Numbers)

Enter Programming Code

(Six Numbers)

Enter Programming Code

(Six Numbers)

Enter Programming Code

(Six Numbers)

Enter Programming Code

(Six Numbers)

Press

Press

Press

Press

Press

Press

Press

Enter NEW User Code

(Four Numbers)

Enter UNWANTED

User Code (Four Numbers)

Enter NEW Programming

Code (Six Numbers)

Enter Programming Code

(Six Numbers)

Re-enter NEW User Code

(Four Numbers)

Re-enter UNWANTED

User Code (Four Numbers)

Re-enter NEW Programming

Code (Six Numbers)

Enter Programming Code

(Six Numbers)

Wait for

3 Lights + 3 Beeps

Wait for

3 Lights + 3 Beeps

Wait for

3 Lights + 3 Beeps

Wait for

3 Lights + 3 Beeps

Wait for

3 Lights + 3 Beeps

Wait for

3 Lights + 3 Beeps

Wait for

3 Lights + 3 Beeps

Wait for

3 Lights + 3 Beeps

Wait for

3 Lights + 3 Beeps

Wait for

3 Lights + 3 Beeps

Wait for

3 Lights + 3 Beeps

Success!

1 Long Light + 1 Long Beep

Wait for

3 Lights + 3 Beeps

Success!

Blinking

Wait for

3 Lights + 3 Beeps

Wait for

3 Lights + 3 Beeps

Wait for

3 Lights + 3 Beeps

Success!

1 Long Light + 1 Long Beep

Success!

1 Long Light + 1 Long Beep

Success!

1 Long Light + 1 Long Beep

Success!

1 Long Light + 1 Long Beep

Success!

1 Long Light + 1 Long Beep

Delete

UserCode

Change

Programming

Code

EnableVacation

Mode

(DisableAll)

Disable Vacation

Mode

(Enable All)

1

Enable/Disable

Beeper

DeleteAll

2

UserCodes

PutLock

inEnrolment

Mode

3

FOLD

1

Installation Instructions & User Guide:
Wireless Keypad Lock LE162

CONTENTS

Contents of the box .................................................................................. 2

How to install your lock ............................................................................ 3

- Door preparation .................................................................................... 3

- Lock installation ............................................................................... 9

- Template (see inside back cover) ...................................................IBC

Lock Parts ............................................................................................... 15

Codes ...................................................................................................... 16

- Programming and user codes ......................................................... 16

- Manual programming codes ........................................................... 17

Replacing batteries ................................................................................. 16

Functions ................................................................................................ 18

- Operating buttons .......................................................................... 18

- Operating guide ............................................................................. 18

- Restoring factory settings .............................................................. 19

- Vacation mode function ................................................................. 19

Emergency override key .......................................................................... 20

Troubleshooting ...................................................................................... 21

Glossary .................................................................................................. 23

2

CONTENTS OF THE BOX

TOOLS NEEDED

Phillips Screwdriver Side Cutters Tape Measure Pencil

Chisel Hammer54mm Hole SawDrill (3mm, 12mm,

25mm bits)

3

HOW TO INSTALL YOUR LOCK

1. Door preparation

32mm-45mm

1.1 Measuredoorwidth.

If the door is thinner
than 32mm or thicker
than 45mm, then the
lock will not t properly
on the door.

1.2 Marklockcentrelineon
 doorfaceanddooredge.

Door face

Door edge

Recommend between

1040mm and 1100mm from oor.

4

1. Door preparation (continued).

 1.3 Markanddrill54mmand12mmholes.(Seeinsidebackcoverfortemplate).

12mm drill bit

54mm hole saw

B. C.

30mm

100mm

95mm

60mm

A.

32mm-45mm

5

1.4 Markanddrill25mmholeindooredge.

A. B.

½ door

width

25mm drill bit

C. D.

6

1. Door preparation (continued).

E. F.

G. H.

7

7

1.5 Measureandmarkdoorjambforstrike.

A. Measure from oor and mark on door jamb.
B. Mark centre for strike hole exactly opposite latch hole.

A.

Door jamb

Latch hole

Recommended between
1040mm and 1100mm

from oor

Recommended between
1040mm and 1100mm

from oor

B.