Schlage CO-100 User Manual

CO-100

OFFLINE LOCK USER GUIDE

INSTRUCTIONS FOR CORE SERIES OFFLINE LOCKS

Para el idioma español, navegue hacia www.schlage.com/support.

Pour la portion française, veuillez consulter le site www.schlage.com/support.

P516-270

2

CO-100 Offl ine Lock User Guide

CONTENTS

Overview ........................................................................................................................................ 3

Getting Started .............................................................................................................................. 4

Construction Access Mode ............................................................................................................ 4

Manual Lock Programming ........................................................................................................... 5

Credential Types ........................................................................................................................ 5

Programming Legend ................................................................................................................ 5

Manual Programming Commands ............................................................................................. 6

Using the Lock ............................................................................................................................... 7

Error Codes ................................................................................................................................... 7

Testing ........................................................................................................................................... 7

Mechanical Testing .................................................................................................................... 7

Electronic Testing ...................................................................................................................... 7

Resetting To Factory Defaults ........................................................................................................ 8

Batteries ....................................................................................................................................... 9

Installing or Replacing Batteries ................................................................................................ 9

Low Battery Indications ............................................................................................................. 9

Battery Failure Mode ................................................................................................................. 9

LED Reference ............................................................................................................................ 10

Schlage Button ........................................................................................................................ 10

Optional Inside Push Button (IPB) ........................................................................................... 10

Troubleshooting ........................................................................................................................... 10

FCC Statements .......................................................................................................................... 10

www.schlage.com/support

877.671.7011

3

CO-100 Offl ine Lock User Guide

OVERVIEW

The Schlage CO-100 is an off-line electronic lock in the CO-Series product line.

• Two factory-confi gured functions are available: 1) Classroom/Storeroom, and 2) Offi ce.

• The lock is powered by four (4) AA batteries. See Batteries on page 9 for more information.

• Outside lever is normally locked.

• Inside lever always allows egress.

Outside

Schlage Button

Outside Lever

Keyway

Inside

Thumbturn

Battery
Compartment

Inside Push
Button

Inside Lever

Keypad

CO-100-CY
CO-100-MS

CO-100-MD

CO-100-993

4

CO-100 Offl ine Lock User Guide

GETTING STARTED

Follow these steps when setting up a new lock.

1. Install the lock. See the installation guide that came with the lock, or visit
www.schlage.com/support, for more information.

2. Test the lock for proper mechanical and electronic operation. See Testing on page 7 for more
information.

3. When ready to set up for normal use, enter a new programming code, then program the user
credentials. See Manual Lock Programming on page 5-6 for more information.

4. Familiarize yourself with the information in this guide.

!

Save this user guide for future reference.

CONSTRUCTION ACCESS MODE

Construction Access Mode is used to allow access before the lock has been programmed, and for
testing purposes. Construction Access Mode is enabled by default.

Offl ine locks with keypads, have a default PIN of 13579
and “#”, which can be used for installation, testing and
construction access.

• To test, enter the default PIN (13579 and “# ”).

• The Schlage button will blink and the lock will unlock.

• The default PIN is automatically deleted when a new
programming credential is created.

TIP

If you press the Default PIN code on a
new lock and the code is not accepted,
the lock has already been programmed.

If the new PIN is not known, or to put
the lock back into construction access
mode, reset the lock to factory settings.
See Resetting To Factory Defaults on
page 8 for more information.