MCCD-29469
CD MP3 MICROSYSTEM
WITH USB
USER MANUAL
Please read and keep these instructions
2
Important safety instructions – please read care fully
and keep for future reference
To reduce the risk of fire or electric shock, do not expose this product to water, rain or
moisture. To prevent the ri sk of electric shock, do not remove the cover or back of this
product. In case of product failure, only qualified personnel can repair. There are no
user-serviceable parts inside.
Use of controls, adjustments, or performance of procedures other than those specified
herein may result in dangerous radiation exposure. This product is rated as LASER
CLASS 1 PRODUCT.
CAUTION: Laser radiation when open - never stare into the laser beam.
CAUTION !
Dangerous tension inside the product ! Do not open. Risk of electric shock ! No parts can be
repaired by the end-user. Only qualified personnel can repair and maintain this product.
If the electric cord is damaged, it must be replaced by the manufacturer or qualified after-sales
personnel in order to avoid any danger.
The product must be installed in accordance with local laws.
Damaged batteries must be properly disposed. In order to protect the environment, please dispose the
batteries properly, in accordance with local laws (information is available at your reseller).
Where to install the product
- Place the product on a straight, rigid and stable place. Do not place the product on a carpet.
- Do not place the product on top of another that may cause overheating (for example, a receiver
or amplifier).
- Do not place anything underneath the product (for example, CDs or magazines).
Proper ventilation
- Place the product in a sufficiently–aerated place to avoid overheating. Allow at least 10cm
spacing at the back and top of the product, and 5cm spacing on both sides to prevent
overheating.
- Do not place items such as newspapers, tablecloth, curtains, in front of the ventilating
openings.
Do not expose the product to high temperatures, moisture, water and dust.
- The apparatus shall not be exposed to dripping or splashing. No object filled with liquids, such
as vases, shall be placed on the apparatus.
- Do not place other items close to this product that may damage it (for example, objects
containing water or lightened candles).
- No naked flame sources, such as lighted can dles, should be placed on the apparatus.
3
Electric supply
- Please unplug the product in case of prolonged non-use.
- This product is intended to be used under temperate climate and should not be used under
tropical climate.
- If the supply cable is damaged, it must be replaced by the manufacturer or qualified after-sales
personnel to avoid any danger.
- This product must be connected to an electrical supply 230V ~ 50Hz.
- The plug must be accessible after installation.
This product is compliant with directives 2006/95/CE (abrogating the directive
73/23/CEE modified by the directive 93/68/CEE) and 2004/108/CE (abrogating the
directive 89/336CEE).
- This logo set on the product means that the recycling of this apparatus comes within the framework
of the directive 2002/96/EC of January 27, 2003 concerning the waste on electrical and electronic
equipment (WEEE).
- The presence of dangerous substances in the electrical and electronic equipments can have
potential consequences on the environment and human health in the cycle of reprocessing this
product.
- Therefore, at the end of its lifetime, this product shall not be disposed with other non-recycled waste.
- As the end user, your role is of prime importance in the cycles of re-using, recycling, and other forms
of valorization of this electrical and electronic equipment. Local authorities and resellers have set
special procedures for the purpose of collecting and recycling this product.
- You have the obligation to use the selective waste collection systems put in place by your local
authorities.
4
INTRODUCTION
Thank you for choosing this Schaub Lorenz product. Here are the main characteristics of your new
microsystem:
‐ Equipped with a digital PLL tuner, you can easily search and memorize FM radios,
‐ With its compact with elegant design, this Hi-Fi system can easily find its place at home and be
installed in just a couple of minutes,
‐ Thanks to its USB input, it becomes a real multimedia player, able to play all your favorite songs in MP3
and WMA format,
‐ Thanks to the EQ and bass-booster systems, you can enjoy an uncompromised music experience with
convenient and easy-to-use audio settings.
‐ Finally, with the CD RIPPING function, you can encode tracks from an audio CD directly on your USB
key.
FUNCTION
‐ COMPATIBLE WITH AUDIO CD/CD-R(W)MP3/CD-R(W)WMA
‐ DIGITAL DISPLAY
‐ MATCHED TWO SPEAKERS TOTAL OUTPUT POWER : 2 X 5W RMS
‐ DIGITAL PLL FM TUNER
LIST OF MAIN PARTS
‐ Master Unit
‐ 2 Speakers
‐ Remote Control
‐ Manual
5
LOCA TIO N OF CONTRO LS
1、POWER ON/OFF
2、REMOTE CONTROL SENSOR
3、PLAY
4、PAUSE
5、STOP
6、PREV
7、NEXT
8、USB
9、EQ
10、CD/FM
11、CD/USB
12、RIPPING
13、DISPLAY
14、HEADPHONE
15、VOL ADJUST
16、Amplifier Output
17、FM antenna
6
18、OPEN/CLOSE
1. RIPPING
2. Number key
3. Mute
4. Random
5. Back/Forward
6. CD/FM
7. BASS
8. AUTO
9. TREBLE
10. EQ
11. Program
12. Repeat
13. CH+/-
14. SEEK+/-
15. Next / Prev
16. CD/USB
17. Vol+/-
18. Save
19. ST/MO
20. INTRO
7
INST ALL THE REMOTE CONTROL BATTERY
1. Remove the battery door.
2. Install 2pc ``AAA`` battery into the battery bracket (batteries not provided). Make sure that the +
symbol is respected
3. Close the battery door.
Note:
1. Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment with a
cloth. If chemicals touch you skin, wash immediately.
2. If the remote control is not going to be used for an extended period of time, remove the batteries.
3. Dispose of used battery by following your local hazardous waste regulations.
SYSTEM CONNECTION
You can connect the player to the speakers and enjoy listening.
Connect the speaker cables to the SPEAKER jacks which is on the back of the player.
BASIC OPERA TION
PREP ARATIVE
1). Before turning on, check whether all the connection are correct and reliable. Plug the power
cord at last.
2). Press POWER
button on the front panel to turn on.
3). Press OPEN/CLOSE
button on the top cover to open the disc door, put the disc into the CD
compartment, and then close the disc door. The unit starts reading and playing.
POWER
Press the POWER button on the front panel to turn on/off the unit.
NUMBER BUTTONS
While playing songs, press the NUMBER
buttons on the remote control to select the songs
you need. For example, the second song is required: press the 0
and 2 buttons. If the 16 th
8
song is needed, press the 1 and 6 buttons.
VOLUME ADJUSTMENT
Press the VOL-/+
buttons on the remote control to turn up or down the volume of this unit.
You can also turn the VOLUME KNOB on the front panel to control volume.
CD RIPPING
While playing the CD disc, press RIPPING
button, “REC” will appear and flash on the display
screen, then the CD’s audio track that you have selected will be ripped into MP3 format and
stored in the USB device, succeeding the USB sequential order.
CD-RIPPING is an innovating function that allows you to encode tracks from an audio CD
directly on your USB key. You can then listen to these tracks anywhere you like, without
needing a computer.
Explore this function in just a few steps:
-insert an audio CD in the player. The CD starts playing.
-insert a USB stick at the front of the device.
-Press the RIPPING button, and the play begins encoding automatically.
Note: during ripping, the song being ripped will be played at the same time. On ce the RIPPING
completed, the player will turn back to the CD playing automatically. You can now withdraw
your USB and listen to the MP3 recorded anywhere you like.
Useful Information – Frequently Asked Questions
If the CD RIPPING does not work
- When you press the RIPPING button, if no any response, this means that there is no audio CD in the
drive.
- When you press the RIPPING button, the DEVICE status is “NO USB”: this means that there is no
USB inserted. Insert a storage device first, and then try again.
USB Compatibility
- If the player does not recognize your USB drive or external hard drive connected via the USB port on
the device (no USB message): This unit is compatible with the vast majority of Flash memory media
(USB sticks and MP3 players) and disk drive (MP3/Video players with HDD). However, this device may
not be compatible with some media, especially the self -powered external hard dri ves. In the latt er case,
your hard drive should be simultaneously connected to a power supply (mains or battery) and your
DVD player via USB (Please refer to the instruction manual of your hard disk device).
- The CD-RIPPING function is only compatible with the USB sticks and MP3 players whose file system
is compatible with FAT/FAT32. In case of recording problem, you can verify compatibility by connecting
your storage device to your computer. Under Windows 95/XP, simply go to My Computer, do a
right-click on the device’s name (usually D:) and select "Properties" from the menu. The file system
type will then appear on screen. If the file system is a different one (eg NTFS), you can reformat the
support in FAT32, after doing a data backup.
9
Audio CD Compatibility
The CD-RIPPING function is only compatible with Audio CD. Other disc types such as CD-R/-RW, CD
MP3, DVD and Audio DVD are not supported. Besides, the discs in CD-G and DTS-CD formats, or
Audio CD with special protections may not be supported.
Respect for Copyright
The CD-RIPPING function must be used legally. It is intended for strictly personal and private use.
More specifically, it is forbidden to duplicate or disseminate any artistic works without the authors’
authorization.
PLAY/PAUSE
In play status, press the PLA Y/PAUSE
button, the play will be paused, and press it again to
continue playing.
STOP
While playing songs, press the STOP
button on the remote control, and then press
PLAY/PAUSE
button, the disc will be played from the beginning.
MUTE
In play status, If the MUTE
button is pressed, there will be no audio output, the sound is
eliminated. Then press this button again or press VOL+/-
buttons to exit the mute status, the
sound resumes to be its normal status.
FAST REWIND / FAST FORWARD
While playing the CD disc, press the
button or button, the disc will play fast rewind or
fast forward. Press the PLAY/PAUSE
button to exit this status and resume to normal playing.
SEEK-/+
While in radio mode, press the SEEK-
button or SEEK+ button, the player will seek the
frequency up or down.
REPEAT
Wile playing the CD discs, repeatedly press the REPEAT
button to separately select the
different contents for repetition: Track repeat, All repeat.
PROGRAMMED PLAYBACK
Up to 20 tracks can be programmed in to play in any desired sequence.
1. In stop mode, press the PROG
button the display shows"PO1" in the display
2. Press number key
to input the desired track to be memorized.
3. Press to the PROG
again, the display shows "PO2" the first program is OK. Operate repeatly
10
4. Press PLAY/PAUSE to start playing. To cancel program play, Press STOP .
Note: when you operate this function, please make sure the mode is STOP. Otherwise you would just
find the selections to set the play mode
RANDOM
While playing the CD disc, press the RANDOM
button to play the disc in random.
AUTO
While in radio mode, press the AUTO
button to search the bands automatically.
PREVIOUS/NEXT
While playing the CD disc, press
or button to go to the previous or next song.
CH- /CH+
While in radio mode, press CH-
or CH+ button to go to the previous or next band.
MONO/STEREO
While in radio mode, press the MO/ST
button on the remote control to select the mono or
stereo.
SAVE
While in radio mode, press the SAVE button on the remote control to store the current
band.
EQUALIZER
In play status, press EQ
button on the remote control, you can select different sound field effects. It
could exist automatically
Note: Some disc content is unsuitable for this EQ format, it may arouse distortion while selecting.
BASS/TREBLE
In play status, press the BASS
and TREBLE button on the remote control , and then press
VOL-/+
to adjust the BASS and TREBLE value.
This function provides a better quality of BASS and TREBLE sound.
11
PLAYING USB
Press the “CD/USB” button to switch to CD / USB playback.
NOTE: If in FM mode ,please press CD/FM first to switch to CD mode before switch to USB.
Connecting a USB device
1) Insert a USB key inside the connector.
2) Press the CD / USB key to start.
Remark: Depending on the capacity of the device, the reading can take more than 1 minute.
The unit cannot read my USB device.
- Once you have plugged your device to the unit, you may need to switch on the USB device
before it can operate.
- This unit does not support a direct USB connection with a computer. You need to use a USB
device, a MP3 player or a PMP (Portable Multimedia Player with hard disk).
- If you are using a USB external hard disk: you need to connect your device simultaneously to
an external power source and to the unit. If you are using a self-powered PMP, make sure that
the battery is sufficiently loaded.
- Check that the files system of your USB device is formatted into the FAT or FAT 32 format. USB
device formatted into NTFS are not compatible with this unit. Caution: if you attempt to modify
your file system, formatting your device will erase all data. Please refer to your USB device’s
instruction manual first.
- Warning: Connect your USB device directly to the USB port of the device. Using an extension
cable is not recommended and may cause interference and failure of data transfer
USING HEADPHONE
Inserting the plug of your headphone into the Head ph one socket (on the front panel). It will
enable you to listen to the audio in private.
Note: 1. Avoid impairing your hearing, please turn the volume to the lowest status before
listening.
2. When plugging the headphone, the speakers have no sound.
Remark: Headphone is not provided.
FM RADIO OPERATION
1. Enter FM Function
In the turn-on or playing status, press the CD/FM
button on the remote control (or front panel) to
enter FM status. Press this button again to switch between FM and CD playing.
2. Select Bands
1) Select band by pressing SEEK-
or SEEK+ button: under some frequency, press the button, the
frequency will be up or down on the step. The step of FM is 0.05 MHz
2) Select band by pressing number buttons: you may select the bands that have been saved by
12
pressing the number buttons. For example: press 10+ button once, 5 button once, you may
select the 15th band. Press the CH-
or CH+ button, the band will be switched up or down.
3) Automatically search bands: press the AUTO
button, this unit will start to search bands from the
lowest part to highest part automatically. Meanwhile the searched bands will be saved orderly.
Press STOP button to stop searching.
3. Soundtrack Selection
Press the MO/ST
button on the remote control, you may select Mono and Stereo sound track output
in FM status. If the signal is not strong enough, you cannot select Stereo.
4. Exit FM Status
Press the CD/FM
button on the remote control (or front panel) to exit FM status, and press
CD/USB switch to other modes.
Remark: FM Frequency range: 87.5-108 MHz
NOTE: 1. You may adjust the best radio effect by adjusting the antenna.
2. You can search further bands by pressing AUTO
button when adjusted the antenna in a right
position.
3. If the band is not clear by auto search, you choose the way manual search adjustment by
press SEEK-/SEEK+
button.
4. The channel number could not exceed 20
5. Cannot input the frequency number directly.
SPECIFICATION
Output ports L/R speaker output ports
Input ports USB In, Headphone Jack
Power supply 220-240V~ 50Hz
Max power 40W
Frequency 20Hz-20KHz ±3dB
13
TROUBLE SHOOTING
Please use the following methods to solve the following problems while using this unit.
Fault Phenomenon Possible Cause Handing
Power supply cannot be
turned on
Power plug is not fully inserted into
the socket
Insert the power plug into
the socket securely
Battery is used up
Replace with a new
battery
The remote control does
not work
The front end of the remote control
is not aimed at the infrared
reception part of the player
Please aim at the remote
control window
The disc door is not close well Close the disc door
No disc inserted
Place a disc in the
compartment
Play can not be realized
Inverse placement of disc
Be sure that the side with
pictures of the disc points
upwards
No sound from
loudspeaker
The volume is in the lowest status Turn the volume up
Disc not clean
Use a piece of clean and
soft cloth to clean the disc
Disc scratched
Discontinuous sound
Disc distorted
Replace the disc with a
new one
Operation cannot be done
Embedded micro computer fails due
to lightning, static or other
interference
Power OFF, and restart
the player after 10
seconds
SAV
ADMEA / LOGISAV
ZI du clos des charmes
26 rue du clos des charmes
77090 COLLEGIEN - FRANCE
Loading...