SATURN EQUIPMENT
OWNER’S MANUAL
Gas Griddle – Heavy Duty
Installation Operation Maintenance
SG48-HD – 48" Heavy Duty Manual Griddle
PLEASE RETAIN THIS MANUAL FOR FUTURE REFERENCE
Gas equipment manufactured for Saturn Equipment are for use with the type of gas specified on the rating plate
and for installation will be in accordance with National Fuel Gas Code ANSI Z223.1 (latest edition)
FOR YOUR SAFETY
Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.
Instructions to be followed in the event the user smells gas fumes must be posted in a prominent location in the
installed kitchen area. The information shall be obtained from a local gas supplier.
WARNING: Improper installation, adjustment, alteration, service and maintenance can cause property damage, injury or death. Read the installation, operating and maintenance instructions thoroughly before installing or servicing this equipment.
SATURN EQUIPMENT www.saturnequipment.com
Saturn™ Equipment Limited Warranty
Saturn warrants its new product to be free from defects in material and workmanship for a period of one (1) year from the original date of installation not to exceed 18 months from date of original shipment from factory. Equipment sold and installed for residential use, or outside the continental United States is excluded from warranty. This warranty is limited to product(s) sold to the original commercial user. The liability of Saturn is limited to, at Saturn option the repair or replacement of any part found by Saturn to be warranted herein.
Saturn shall bear the normal labor charges for repair or replacement to the extent that such repair or replacement is performed within 35 miles of the office of an authorized
service agency, within the continental United States and during regular (straight time) hours. Travel outside of the 35 miles and any work performed at overtime or weekend rates is the responsibility of the owner/user. Defective parts must be returned to Saturn, freight prepaid, for Warranty inspection. Saturn assumes no responsibility for any product(s) not installed properly in accordance with the instructions supplied with the equipment. Any equipment which has been modified by unauthorized personnel or changed from our original design is not covered under this Warranty.
Saturn assumes no obligation for any product which has been subject to misuse, abuse or harsh chemicals. Normal maintenance as outlined in the instructions supplied with the equipment is the responsibility of the owner-user and is not part of this warranty.
Light bulbs, porcelain, glass components, normal parts, wear and maintenance are excluded from this warranty.
Saturn Fryers carry one year parts and labor warranty and a limited, prorated 5 year warranty on stainless steel fry vessels.
This warranty is in lieu of any other agreement, expressed or implied, and constitutes the only warranty of Saturn with respect to the product(s).
Saturn shall not be liable whether in contract or in tort or under any other legal theory, for loss of revenue or profit, or any substitute use or performance, or for incidental, indirect, special or consequential damages, or for any other loss or cost of similar type.
Proper installation, initial check out, air shutter adjustments, or normal maintenance such as lubrication, adjustment or calibration of controls is the responsibility of
the dealer, owner-user or installing contractor and is not covered by this warranty.
The Company reserves the right, without prior notice, to make changes and revisions in the product specifications, design, and material.
Possession of this price list does not constitute an agreement or offer to sell product to the possessor.
Prices are subject to change without notice. Prices do not include sales tax. All prices are in U.S. dollars.
Returned goods are subject to a 20% restocking charge and the cost of reconditioning the equipment for resale. Prior to returning the goods, a Return Goods Authorization (RGA) number must be granted by Saturn. All returned goods must be shipped freight prepaid. Shipments received without a RGA number will be refused. Custom units built to the buyer’s specifications may not be returned or cancelled.
Saturn is not responsible for printing errors in pricing or specification.
SERVICE POLICY AND PROCEDURE GUIDE and ADDITIONAL WARRANTY EXCLUSIONS
1.Resetting of safety thermostats, circuit breakers, over load protectors, and/or fuse replacements are not covered by this warranty unless warranted conditions are the cause.
2.All problems due to operation at voltages or phase other than specified on equipment nameplates are not covered by this warranty.
Conversion to correct voltage and/or phase must be the customer’s responsibility.
3.All problems due to electrical connections not made in accordance with electrical code requirements
and wiring diagrams supplied with the equipment are not covered by this warranty.
4.Replacement of items subject to normal wear, to include such items as knobs, light bulbs; and, normal maintenance functions including adjustments of thermostats, adjustment of micro switches and replacement of fuses and indicating lights are not covered by warranty.
5.Damage to electrical cords and/or plug due to exposure to excessive heat are not covered by this warranty.
6.Full use, care, and maintenance instructions supplied with each machine. Noted maintenance and preventative maintenance items, such as servicing and
cleaning schedules, are customer responsibility. Those miscellaneous adjustments noted are customer responsibility. Proper attention to preventative maintenance and scheduled maintenance procedures will prolong the life of the appliance.
7.Travel mileage is limited to sixty (60) miles from an Authorized Service Agency or one of its sub-service agencies.
8.All labor shall be performed during regular working hours. Overtime premium will be charged to the buyer.
9.All replacement parts are warranted for
ninety (90) days from date of purchase on nonwarranty equipment. This parts warranty is limited only
to replacement of the defective part(s).
10.Installation, labor, and job check-outs are not considered warranty and are thus not covered by this warranty.
11.Charges incurred by delays, waiting time or operating restrictions that hinder the service technician’s ability to perform service are not covered by warranty. This includes institutional and correctional facilities.
Warranty Limited Equipment Saturn
Page 1
SHIPPING DAMAGE CLAIM PROCEDURE
NOTE: For your protection, please note that equipment in this shipment was carefully inspected and packaged by skilled personnel before leaving the factory. Upon acceptance of this shipment, the transportation company assumes full responsibility for its safe delivery.
IF SHIPMENT ARRIVES DAMAGED:
1.VISIBLE LOSS OR DAMAGE: Be certain that any visible loss or damage is noted on the freight bill or express receipt, and that the note of loss or damage is signed by the delivery person.
2.FILE CLAIM FOR DAMAGE IMMEDIATELY: Regardless of the extent of the damage.
3. CONCEALED LOSS OR DAMAGE: if damage is unnoticed until the merchandise is unpacked, notify the transportation company or carrier immediately, and file “CONCEALED DAMAGE” claim with them. This
should be done within fifteen (15) days from the date the delivery was made to you. Be sure to retain the container for inspection.
Manufactuer cannot assume liability for damage or loss incurred in transit. We will, however, at your request, supply you with the necessary documents to support your claim.
TABLE OF CONTENTS
WARRANTY |
Page 1 |
SPECIFICATIONS |
Page 2 |
FEATURES & OPERATING CONTROLS |
Page 3 |
PRECAUTIONS & GENERAL INFORMATION |
Page 4 |
AGENCY LISTING INFORMATION |
Page 4 |
INSTALLATION |
Pages 5, 6, 7, 8 |
OPERATION |
Pages 9, 10 |
CLEANING INSTRUCTIONS |
Page 11, 12 |
TROUBLESHOOTING SUGGESTIONS |
Page 13 |
PARTS & SERVICE |
Page 14 |
CUSTOMER SERVICE DATA |
Page 14 |
PROPANE CONVERSION |
Page 15, 16 |
INTRODUCTION |
|
Thank You for purchasing this appliance.
Proper installation, professional operation and consistent maintenance of this appliance will ensure that it gives you the very best performance and a long, economical service life.
This manual contains the information needed to properly install this appliance, and to use and care for the appliance in a manner which will ensure its optimum performance.
SPECIFICATIONS
MODEL |
STYLE |
GAS TYPE |
MANIFOLD |
Total B.T.U. |
|
PRESSURE |
per Hour |
||||
|
|
|
|||
|
|
|
|
|
|
SG48-HD |
4 Burners w/ |
Natural Gas |
5.0" W.C. |
120,000 |
|
individual control |
Propane (LP) |
10" W.C. |
|||
|
|
Contents of Table
Page 2
FEATURES & OPERATING CONTROLS
CONTROLS OPERATING AND FEATURES
Fig. 1 Heavy Duty Gas Griddle - Features & Operating Controls
Page 3
PRECAUTIONS AND GENERAL INFORMATION
This appliance is intended for use in commercial establishments only.
This appliance is intended to prepare food for human consumption. No other use is recommended or authorized by the manufacturer or its agents.
This appliance must be installed by a technician qualified and certified or licensed to install gas-fired equipment. A licensed technician must perform the initial start-up and adjustment of the appliance. Operators of this appliance must be familiar with the appliance use, limitations and associated restrictions. Operating instructions must be read and understood by all persons using or installing this appliance. Cleanliness of this appliance is essential to good sanitation. Read and follow all included cleaning instructions and schedules to ensure the safety of the food product.
DO NOT submerge appliance or burners in water. This appliance is not jet stream approved. DO NOT direct water jet or steam jet at this appliance, or at any control. DO NOT splash or pour water on, in or over any controls. DO NOT wash counter around this appliance with water jet. Burners which have become wet must be thoroughly dried before use.
Griddle surface will be very hot when in use. Contact will cause severe injury.
This appliance must be operated with the supplied 4” legs properly installed.
Do not operate this appliance if the smell of gas is present. Turn off all gas supply valves and move to a remote location to call your manufacturer for service.
The technical content of this manual, including any parts breakdown illustrations and/or adjustment procedures, is intended for use by qualified technical personnel only.
Any procedure which requires the use of tools must be performed by a qualified technician.
This manual is considered to be a permanent part of the appliance. This manual and all supplied instructions, diagrams, schematics, parts breakdown illustrations, notices and labels must remain with the appliance if it is sold or moved to another location.
AGENCY LISTING INFORMATION
This appliance conforms to NSF Standard 4 for sanitation only if installed in accordance with the supplied Installation Instructions and maintained according to the instructions in this manual.
This appliance meets ANSI Z.83.11 specifications for gas-fired food service equipment.
WARNING: FIRE HAZARD
All servicing of the gas supply and combustion components of this appliance must be performed by a technician trained and certified in the maintenance of gas appliances.
Improper servicing of gas equipment can result in fire. and explosion.
CAUTION: HOT SURFACE
Exposed surfaces can be hot to the touch and may cause burns.
INFORMATION GENERAL AND PRECAUTIONS
Page 4
INSTALLATION
UNPACKING & INSPECTION
Carefully remove the appliance from the carton. Remove all protective plastic film, packing materials and accessories from the appliance before connecting performing any installation procedure. Carefully read all instructions in this manual and the Installation Instruction Sheet packed with the appliance before starting any installation.
Read and understand all labels and diagrams attached to the appliance.
Carefully account for all components and accessories before discarding packing materials. Store all accessories in a convenient place for later use.
COMPONENTS
Dual Burner (SG48-HD, 4 ea.) Adjustable Legs (set of 4) Grease Tray (SG48-HD, 2 ea.)
SETUP
Setup the griddle only on a firm, level, non-combustible surface. Verify local codes for requirements. Concrete, tile, terrazzo or metal surfaces are recommended. Metal or tile over combustible material may not meet code for non-combustible surfaces. Install the provided adjustable legs, one on each corner of the appliance,
in the holes provided.
Verify that the unit sits firmly ON ALL FOUR LEGS.
With the adjustable legs, adjust as required to level the appliance. All four legs must be adjusted to firmly contact the countertop in order to prevent tipping.
Adequate clearance for air openings in the cabinet must be provided. Refer to the Installation Instruction Sheet for required clearances. Maintain required clearances between the appliance and adjacent combustible surfaces.
The griddle must be installed in an area with sufficient make-up air for proper combustion, and must be installed such that the flow
of combustion and ventilation air will not be obstructed.
When used with an exhaust fan, special precautions must be observed to avoid interference with the operation of the griddle, such as drafts and air starvation.
Page 5
NOTE: DO NOT discard
the carton or other packing materials until you have inspected the appliance for hidden damage and tested it for proper operation.
Refer to SHIPPING DAMAGE CLAIM PROCEDURE on the inside front cover of this manual.
DANGER: HEALTH HAZARD
This appliance must be properly ventilated. Failure to provide and maintain proper ventilation of exhaust gasses can result in severe injury or death.
WARNING: FIRE HAZARD
Do not store gasoline or any other flammable or
combustible material near this appliance. The open flame can cause such materials to ignite.
The area where the griddle is installed must be kept clear of combustibles and flammables. This includes mops, rags, grease, wrapping paper and electric cords.
NOTICE: Manufacturer’s warranty on this griddle is in effect only when the griddle is installed in accordance with these instructions and local codes and ordinances or, in the absence of local codes, the National Fuel Gas Code, ANSI Z223.1 (current edition). The manufacturer of this griddle assumes no liability for any damage or injury resulting from failure to comply with this notice.
INSPECTION AND INSTALLATION
Loading...