Saturn ST-FP9084 User Manual [ru]

2
ST-FP9084
HAND BLENDER
БЛЕНДЕР
БЛЕНДЕР
3
4
GB
HAND BLENDER
Read these instructions for use carefully before you use the appliance and save them for future reference.
GENERAL SPECIFICATION
A. Normal speed button B. Turbo speed button C. Motor unit D. Blender bar E. Whisk coupling unit F. Whisk G. Chopper coupling unit H. Chopper blade unit I. Chopper bowl J. Beaker
Important
Never immerse the motor unit in water or any other fluid, not rinse it under the tap. Use only a moist cloth to clean the motor unit.
Warning
• Check if the voltage indicated on the appliance corresponds to the local mains voltage, before you connect the appliance.
• Do not use the appliance if the mains cord, the plug or other parts are damaged.
• If the mains cord is damaged, you must have it replaced by manufacturer or the service centre authorized by the manufacture, or similarly qualified person, in order to avoid a hazard.
• Never let the appliance run unattended.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Children are not allowed to use the appliance without supervision.
• Do not touch the blades, especially when the appliance is plugged in. The blades are very sharp.
• If the blades get stuck, unplug the appliance before you remove the ingredients that block the blades.
Caution
• Switch off the appliance and disconnect it from the mains voltage before you change accessories or approach parts, that move during use.
• Care should be taken when handling the sharp cutting blades, emptying the bowl and during cleaning.
• This appliance is intended for household use only.
• Do not process more than three batches without interruption. Let the appliance cool down to room temperature before you continue processing.
Preparing for use
• Thoroughly clean the parts, that come into contact with food before you use the appliance for the first time.
• Let hot ingredients cool down before you process them (max. temperature 60°C).
• Cut large ingredients into pieces of approximately 2 cm before you process them.
• Assemble the appliance properly, before you put the plug in the wall socket.
Using the appliance
Hand blender
The hand blender is intended for:
- blending liquids, e.g. dairy products, sauces, fruit juices, soups, mixed drinks and shakes.
- mixing soft ingredients, e.g.
- pureeing cooked ingredients, e.g. for making baby food.
Attach the blender bar to the motor unit.
1. Immerse the blade guard completely in the ingredients.
2. Pressing the normal or turbo speed button to switch on the appliance.
3. Move the appliance slowly up and down and in circles to blend the ingredient.
Chopper
The chopper is intended for chopping ingredients such as nuts, meat, onions, hard cheese, boiled eggs, garlic, herbs, dry bread, etc.
The blades are very sharp! So be very careful, when handling the blade unit. Be especially careful, when you remove the blade unit from the chopper bowl, when you empty the chopper bowl and during cleaning.
1. Put the chopper blade unit in the chopper bowl.
2. Put the ingredients in the chopper bowl.
3. Put the coupling unit onto the chopper bowl.
4. Fasten the motor unit onto the chopper bowl.
5. Pressing the normal or turbo speed button to switch the appliance. If the ingredients stick to the wall of the chopper bowl, loosen them by adding liquid or using a spatula. Always let the appliance cool down after chopping meat.
Whisk
The whisk is intended for whipping cream, whisking egg whites, desserts etc.
5
6
Loading...
+ 7 hidden pages