Sarotech CUTIE DS FHD-181 User Manual

 INSTALLATION MANUAL

We strongly recommend reading the MANUAL before using the
product

FCC Compliance

LABELLING REQUIREMENTS(Part 15, Section 15.19 (a)(3))

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operations.

The instructions furnished the user shall include the following or similar statement,

placed in a prominent location in the text of the manual.

INFORMATION TO THE USER (Part 15, Section 15.105(b))

INFORMATION TO THE USER

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one more of the following measures:

■ Reorient or relocate the receiving antenna.

■ Increase the separation between the equipment and receiver.

■ Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

■ Consult the dealer or an experienced radio/TV technician for help.

WARNING (Part 15, Section 15.21)

Changes or modifications not expressly approved by the sarotech could void the user’s

authority to operate the equipment.

1

Information

FCC Compliance -------------------------------------------------------------------------------------- 1

Information ---------------------------------------------------------------------------------------------- 2

No.1 ■ How to Make USB products -------------------------------------------------------- 3

■ How to use USB power cable ------------------------------------------------------ 6

No.2 Contents of FHD-181 --------------------------------------------------------------------- 8

No.3 Cautions for USB 2.0 --------------------------------------------------------------------- 8

No.4 System Requirement ---------------------------------------------------------------------- 8

No.5 Driver Installation --------------------------------------------------------------------------- 9

5-1. Installation of USB 2.0 driver ------------------------------------------------------ 9

1. Windows 98 ----------------------------------------------------------------- 9

2. Windows ME --------------------------------------------------------------- 12

3. Windows 2000 ------------------------------------------------------------- 13

4. Windows XP ---------------------------------------------------------------- 14

5. MAC OS --------------------------------------------------------------------- 14

6. Checking the driver installation ---------------------------------------- 15

7. How to stop the product ------------------------------------------------- 18

5-2. Installation of IEEE 1394 ----------------------------------------------------------- 14

1. Windows 98 SE ----------------------------------------------------------- 19

2. Windows ME --------------------------------------------------------------- 21

3. Windows 2000/XP -------------------------------------------------------- 23

4. MAC OS --------------------------------------------------------------------- 25

5-3. Driver installation of IEEE 1394+USB Combo -------------------------------- 25

No.6 Please check when you have some troubles --------------------------------------- 19

Specification -------------------------------------------------------------------------------------------- 20

2

1. USB

Fine out the 2 USB port in computer, connect the offered USB power cable

to USB port in computer.

And for another USB port, connect to the USB cable also for supplying the electricity.

2. IEEE 1394

If the IEEE 1394 port of notebook computer is 4 pin port or be used as CardBus way,

the power is not supplied to IEEE 1394 Bus.

So connect the USB power cable like the picture.

3

2. Contents of FHD-181

1) FHD - 181

2) Driver Installation CD

3) Bag

4) Interface cable

5) Manual

6) USB power cable (if USB bus power doesn't work, please connect it)

3. Cautions for USB 2.0

1. If the USB 2.0 product is connected to USB 1.1 Host Adapter,

it will be operated as speed 1.1 (12Mbps)

2. If you want to use USB 2.0 product as USB 2.0 speed(Max.480Mbps),

4

you have to use USB 2.0 Host Adapter.

4. System Requirement

■ 586 Pentium or greater or MAC

■ USB port has to be possible to use

■ Included CD-ROM drive or the driver should be possible to be downloaded

from internet web site.

 Keep away from magnetic substance. Data may be corrupted.

 Keep away from physical or electric shock, it may cause a

malfunction or damage.

 Be careful not to drop AivX, it may cause HDD malfunction.

 Keep AivX away from heat or fire.

 Do not keep AivX in humid place.

 We recommend you to use provided USB cable with Ferrite core.

Caution

5. Driver Installation

5-1 Installation of USB 2.0 driver

 Caution

Using below 6GB hard disk can make some troubles like loss of data.

We recommend you to use 6GB hard disk or greater

1. Windows 98

1) Insert the offered CD into the CD-ROM drive in computer before you

connect the product

2) Select the “setup.exe” of USB folder under the Windows folder in your CD-ROM

5

3) Click “Next” button after operates “Install Shield Wizard”

6