Sanyo VMC-L7720PAS, VMC-L7720P Instruction Manual

Do not allow anything to rest on the power

cord. Do not locate this LCD monitor where
the cord will be damaged by people walking
on it.

Do not overload wall outlets and extension
cords as this can result in fire or electric
shock.

Slots and openings in the cabinet and in the
back or bottom are provided for ventilation to ensure reliable
operation and to protect it from overheating. These openings
must not be blocked or covered. The opening should never be
covered with a cloth or other material, and the bottom openings
should not be blocked by placing the LCD monitor on a bed,
sofa, rug, or other similar surface.

Do not place this LCD monitor near any heat sources such as
radiators, heaters, stoves and other heat-generating products
(including amplifiers).

Do not place the LCD monitor in direct sunlight.

Do not place your LCD monitor on an unstable stand, shelf or

table. Serious injury to an individual, and damage to the LCD
monitor may result if it should fall. Your sales person can recom­mend approved stands or shelf and wall mounting instructions.
A special wall mounting kit is available for this model.

If the LCD monitor is built into a unit, or enclosed, the minimum
distances for ventilation must be maintained. Heat build up can
reduce the life of your LCD monitor, and can be dangerous.

This LCD monitor should be operated only from the type of power
source indicated on the LCD monitor or as indicated in the
Operating Instructions. If you are not sure of the type of power
supply in your home, consult your sales person or your local
power company.

Never add accessories that have not been specifically designed
for this LCD monitor.

Do not drop or push objects into the LCD monitor cabinet slots or
openings. Some internal parts carry hazardous voltages and
contact may result in an electric shock hazard. Never spill liquids
of any kind onto the LCD monitor. Do not place items such as
vases containing liquid on top of the LCD monitor.

Do not expose the LCD monitor to rain or use near water. For
example, near a bathtub, kitchen sink, in a wet basement, etc.
Do not use immediately after moving the LCD monitor from a low
temperature to a high temperature environment, as this causes
condensation, which may result in fire, electric shock, or other
hazards. Before cleaning, unplug the LCD monitor from the wall
socket.

Never stand on, lean on or push the LCD monitor or its stand.
Never allow children to play with the LCD monitor or its stand.

Serious injury may result if it should fall.

Do not apply liquid cleaners or
aerosol cleaners directly onto the
LCD monitor. Only use a soft cloth for
cleaning.

Do not place candles or hot objects
upon the LCD monitor, next to it or
behind it. Open flames must never be
used near the LCD monitor set.

Installation

CAUTION: Please read and retain for your safety. This unit has been engineered and manufactured to assure your personal

safety, but improper use can result in potential electric shock or fire hazards. In order not to defeat the safeguards incorporated
in this receiver observe the following basic rules for its installation, use and servicing.

Use

VMC-L7720P
VMC-L7720PAS

●

Cleaning your LCD screen.

Your LCD screen is coated in a non reflective film. Damage to this
film will result in possible discolouration. Any scratches will not be
repairable.

Clean your screen with a soft cloth, only rub lightly, do not use
detergents.

Do not stick anything to the screen, use solvent or alcohol based
cleaners, hit the screen with a hard object or rub the surface hard.

●

Placement of your LCD Monitor.

Table top stand (if included)

If this LCD Monitor is supplied with a table top stand fitted, it can
be tilted 5˚ forwards and 10˚ backwards.
To tilt your LCD Monitor hold the base (taking care not to trap
your fingers between the bottom of the screen frame and the
base)and gently push the top of the LCD Monitor.

Wall mounting bracket

Optional wall brackets (VESA 100 x 100mm fixing) are available
for your LCD Monitor. Before you consider wall mounting this LCD
Monitor, check that you have an appropriate wall made from solid
materials such as concrete or bricks. You will have to remove the
table top stand to use this.

Important:

This equipment is fitted with an approved in-line mains coupler and with an approved non rewireable UK mains plug

. To change a fuse in this

type of plug proceed as follows:

1. Remove the fuse cover and fuse.

2. Fit a new fuse which should be a BS1362 5Amp A.S.T.A. or BSI approved type.

3. Ensure that the fuse cover is correctly refitted.

If the fuse cover is lost or damaged the plug must NOT be used but replaced with a serviceable plug.
If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug
contains a fuse, this should have a rating of 5 Amp, ensure the fuse cover is correctly fitted. If a plug without a fuse is used, the fuse at
the distribution board should not be greater than 5 Amp.

Note:

The severed plug must be destroyed to avoid a possible shock hazard should it be inserted into a 13Amp socket elsewhere.

The wires in this mains lead are coloured in accordance with the following code:

Blue -------> Neutral
Brown ----> Live

1. The Blue wire must be connected to the terminal which is marked with the letter “N” or coloured BLACK.

2. The Brown wire must be connected to the terminal with the letter “L” or coloured RED.

3. Do not connect either wire to the earth terminal in the symbol or coloured GREEN or GREEN and YELLOW.

Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the wires.

THIS UNIT IS NOT DISCONNECTED FROM THE MAINS UNLESS THE MAINS LEAD IS UNPLUGGED.

Care of your product

Your LCD monitor is fully transistorised and does not contain
any user serviceable components.

You must not remove the rear cover of the LCD monitor by
yourself. The apparatus is working with high voltages and could
damage objects or even endanger people. Leave all required
repair and service jobs to an authorised service technician. He
will exclusively use such spare parts that are complying with
the same safety standards as applicable to the original parts.
The use of original spare parts can prevent fire, shock and
other hazards.

Unplug the LCD monitor from the wall outlet and refer servicing
to qualified service personnel under the following conditions:

■

If the power cord or plug is damaged.

■

If liquid has been spilt into the LCD
monitor.

■

If LCD monitor has been exposed to
rain or water.

■

If the LCD monitor has been dropped or the cabinet has been

damaged.

■

If the LCD monitor exhibits a distinct change in performance.

■ If the LCD monitor does not operate normally by following the

operating instructions.

Adjust only those controls that are covered in the operating
instructions as improper adjustment of other controls may result in
damage. This will often require extensive work by a qualified
technician to restore the LCD monitor to normal operation.

Servicing

Important recycling information.

Your SANYO product is designed and
manufactured with high quality materials and
components which can be recycled and reused.

This symbol means that electrical and electronic
equipment, at their end-of-life, should be
disposed of separately.

In the European Union there are separate
collection systems for used electrical and
electronic products.

Please help us to conserve the environment we live in!

Note: This symbol mark and recycle system are applied only to EU

countries and are not applied to other countries of the world.