How it Works
Sanyo
Loading...
VMC-L2017P
Instruction Manual
19 pgs1.03 Mb0
Service Manual
20 pgs2.79 Mb0
User Manual
2 pgs258.14 Kb0

Sanyo VMC-L2017, VMC-L2019, VMC-L2017P, VMC-L2019P Instruction Manual

Download
Page 1

INSTRUCTION MANUAL

VMC-L2017/VMC-L2017P VMC-L2019/VMC-L2019P

Color TFT LCD monitor English
Moniteur LCD TFT couleurs Français
Monitor TFT LCD color Español
TFT-LCD-Farbmonitor Deutsch
TFT LCD 彩色显示器 中文简体
日本語

About this manual

This manual gives basic connections and operations instructions for 2 NTSC models (VMC-L2017, VMC-L2019) and 2 PAL models (VMC-L2017P, VMC-L2019P).

For more information on models variations, please refer to the specifications page.

Before installing and using this unit, please read this manual carefully. Be sure to keep it handy for later reference.

Page 2

Information to user

FOR USA USERS

Safety Guard

CAUTION ISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

Ine exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in th literature accompanying the product.

CAUTION: Changes or modifications not expressly approved by the manufacturer may void the user's authority to operate this equipment

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generated, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

For the customers in Canada

This class B digital apparatus complies with Canadian ICES-003.

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the manufacturer.

biscard used batteries according to the manufacture's instruction

FOR EU USERS

Please note:

Your SANYO product is designed and manufactured with high quality materials and components which can be recycled and reused.

This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of separately from your

household waste

Please dispose of this equipment at your local community waste collection/recycling centre.

In the European Union there are separate collection systems for used electrical and electronic products

Please help us to conserve the environment we live in

This symbol mark and recycle system are applied only to EU countries and not applied to the countries in the other area of the world.

SANYO FISHER Sales (Europe) GmbH Stahlgruberring 4, D-81829 München, Germany

SANYO Electric Co., Ltd.

1-1, Sanyo-cho, Daito City, Osaka 574-8534, Japan

FOR RUSSIAN USERS

This product certified by official certification company which is authorized by Russian Federation.

ДЛЯ ПОЛЬЗОВАТЕЛЕЙ РОССИЯ

Данная продукция сертифицирована официальным

органом по сертификации Российской Федерации.

(Hg) LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS.

For details see lamprecycle.org, eiae.org.

Page 3

Precautions

  • Use only the power source specified on the unit.
  • When not using this unit for a long period of time, or when cleaning it, be sure to disconnect the power plug from the AC outlet.
  • Do not allow anything to rest on the power cord. And do not place this unit where people will tread on the cord. Do not overload wall outlets or power cords as this can result in a fire or electric shock.
  • Avoid using this unit under the following conditions:
    • in extremely hot, cold or humid places,
    • in dusty places,
    • near appliances generating strong magnetic fields,
    • in places subject to direct sunlight,
    • in badly ventilated places,
    • in automobiles with doors closed.
  • Do not cover the ventilation slots while in operation as this could obstruct the required ventilation flow.
  • When dust accumulates on the screen surface, clean it with a soft cloth.
  • Unplug this unit from the AC outlet and refer servicing to qualified service personnel under the following conditions:
  • when the power cord is frayed or the plug is damaged,
  • if liquid has been spilled into the unit,
  • if the unit has been dropped or the cabinet has been damaged,
  • when the unit exhibits a distinct change in performance.
  • Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Always refer servicing to qualified service personnel.

= LCD Display =

WARNING

Never put the liquid crystals in your mouth. If the LCD panel breaks and the liquid inside leaks out, do not let the liquid come into contact with your mouth and do not swallow it. This could cause poisoning. In the event that it contacts your mouth or eyes, wash immediately with water and consult a physician. If it contacts your hands or clothing, wipe it off with alcohol etc., and wash it away with water.

■ CAUTIONS

  • The LCD panel is manufactured using highprecision technology, but black spots may sometimes appear on the display, or red, blue or green spots may remain lit at all times. In addition, the display brightness may look uneven depending on the viewing angle.
  • This is a feature of LCDs and is not the sign of a malfunction.
  • When used in a cold location, the screen will initially appear darker than normal. As the unit internal temperature rises, the brightness will return to normal.

Contents

Information to user1
Precautions2
Accessories3
Names of controls/parts 3 Front View 3 Rear & Left Side View 4
Remote Controller5
Connecting to External Devices6
OSD Menu Configurations
Video mode
VGA mode .11 Input Menu .11 Picture Menu .12 Sound Menu .13 Setup Menu .14
Troubleshooting15
Specifications16
Dimensions/Angles17

■ Safety Cautions

  • Never wipe the display with detergents or liquids containing ammonia.
  • When soiled from fingerprints, wipe gently with a soft cloth. Rubbing harshly with a soft cloth can cause scratches or display abnormalities. Also, to protect the screen, do not wipe with a dry cloth or chemically treated cloth.
  • Do not use gloves with a rough texture
  • The surface is scratched easily. Do not scrape, hit, or compress with a hard object. This can cause display unevenness or breakdowns.
  • Do not use scrubbing sponges or sharp objects on the easily scratched surface of the display.
  • Do not place heavy objects on the screen, or leave the screen under pressure.
  • Do not place a container of water, chemicals, or small objects in a place where the display surface could be damaged.
Page 4

Accessories

Names of controls/parts

Front View

Moves the OSD menu or decreases the volume level.

Speaker

the power LED will flash.

Also, if no signal is being received in VGA mode.

Page 5

Rear & Left Side View

Left Side View

AUDIO B

Audio B input for VIDEO B : Right (RED), Left (White)

O AUDIO A

Audio A input for VIDEO A/S-VIDEO : Right (RED), Left (White)

Rear View
O POWER

AC power input.

  • VIDEO-A IN Composite signal input for VIDEO A.
  • VIDEO-A OUT Video looping output for VIDEO A.
  • O VIDEO-B IN Composite signal input for VIDEO B.
  • VIDEO-B OUT Video looping output for VIDEO B.
  • S-VIDEO IN
    • Y/C separated signal input.
  • S-VIDEO OUT Y/C separated signal looping output.
I VGA

VGA signal input.

Page 6

Remote Controller

O POWER

Turns the Power On or Off. There will be a few seconds delay before display appears.

O Number buttons

Changes the ID for remote controller (Remote ID). While the SYSTEM ID button () is pressed, enter the desired NUMBER(0 – 9) corresponding to System ID.

Make sure that the Remote ID has been changed correctly by pressing the SYSTEM ID button again.

1 ID RESET

Resets the Remote ID to 01(default value).

④ VOLUME (+, -)

Adjusts the audio volume.

Press to mute the sound temporarily. Displayed on the bottom left of the screen. Press the MUTE button again to cancel the Mute function. Alternatively press the - or + button to cancel the Mute function.

O UNDER SCAN - Available in Video A/B and S-Video mode

Displays the entire video signal on the screen.

MENU

Open the on-screen menu and exit from the menu screen.

O ENTER

Activates a highlighted menu item

O SYSTEM ID

Sets the ID for remote controller (Remote ID). Refer to "2 Number button".

PIP - Available in VGA Mode Push the PIP button to turn PIP screen On/Off.

P.MODE - Available in Video A/B, S-Video Mode Press to select a pre-defined Picture Mode of the monitor. (Dynamic, Standard, Movie, Custom) When you press this button, current mode is displayed on the lower center of the screen. Then push button again to circle through available reconfigured modes.

PREEZE - Available in Video A/B, S-Video Mode Press the button once to freeze the screen. Press it again to unfreeze.

AUTO - Available In VGA mode Only Adjusts the screen display automatically

SOURCE

Press to change the input signal source.

Changing the source is allowed only in external devices that are connected to the monitor at the time.

Moves from one menu item to another horizontally, vertically or adjusts selected menu values.

Page 7

Connecting to External Devices

The product can be connected to external devices such as Camera, Recorder, External Monitor, etc.

Page 8

OSD Menu Configurations

No Signal Display

When there is no connection to the VGA and Video input, the On Screen Display will show this message.

OSD Menu Selection

  • 1. Press the MENU button to see the main menu.
  • Press V/▲ and ENTER button to select the main menu.
  • Press V/▲ and ENTER (or ►) button to select the sub menu.
  • Press ▼/▲ and ENTER (or ► ) button to select setting. (Or press ◄/► button to select setting)
  • 5. Press the MENU or ◀ button repeatedly to exit.

NOTE1: Press the MENU or ◄ button to return to the previous screen. NOTE2: The OSD display will be disappear after 2 minutes if there is no button input.

  • 1. Press the MENU and ENTER button.
  • 2. Press the ENTER or ► button and then ▼/▲ button to select the Video A, Video B or S-Video.
  • 3. Press the ENTER or ▶ button to save the setting and exit.

"PIP" is available in VGA mode.

See " E PIP (Picture In Picture): On, Off" in "VGA mode" on page 11.

Edit Name

  • 1. Press the MENU and ENTER button.
  • Press the V/▲ and ENTER button to select the Edit Name menu.
  • 3. Press the ▼/▲ and ENTER button to select input.
  • 4. Press the ▼/▲ and ENTER button to select the name.
  • 5. Press the MENU or ◀ button repeatedly to exit.
Page 9

Mode : Dynamic. Standard. Movie. Custom

  • 1. Press the MENU and V/▲ button to select the Picture menu.
  • 2. Press the ENTER or ► button to select the Mode menu.
  • 3. Press the ENTER or ▶ button.
  • Press the V/▲ and ENTER button to select the mode.
  • 5. Press the MENU or
  • E Custom : Contrast, Brightness, Sharpness, Color

  • * Tint feature is available in NTSC mode.
  • 1. Press the MENU and V/▲ button to select the Picture menu.
  • 2. Press the ENTER or ▶ button.
  • Press V/▲ and ENTER button to select the Custom.
  • Press the V/▲ and ENTER button to select the desired setting.

  • 5. Press the ◄ / ▶ and ENTER button to adjust the setting value and save.
  • 6. Press the MENU or ◀ button repeatedly to exit.

Color Tone : Cool2, Cool1, Normal, Warm1, Warm2

  • 1. Press the MENU and V/▲ button to select the Picture menu.
  • 2. Press the ENTER or ▶ button.
  • Press the V/▲ and ENTER button to select the Color Tone menu.
  • Press the V/▲ and ENTER button to select the desired setting.
  • 5. Press the MENU or

Size : Zoom, 4:3

This menu is available when you selected "Over" in Under Scan. See "Under Scan" on page 9.

  • 1. Press the MENU and V/▲ button to select the Picture menu.
  • 2. Press the ENTER or ▶ button.
  • Press the V/▲ and ENTER button to select the Size menu.
  • 4. Press the ENTER or ▶ button.
  • 5. Press the ▼/▲ button to select the size.
    • If you select the Zoom, then two icons below appear on the screen.

Press ◄/ ► button to select the desired setting and then press ▼/ ▲ button to adjust the image.

6. Press the MENU or ◀ button repeatedly to exit.

Page 10

I Under Scan : Over, Under

This menu is available when you selected "4:3" in Size. See "Size" on page 8.

  • 1. Press the MENU and V/▲ button to select the Picture menu.
  • 2. Press the ENTER or ▶ button.
  • Press the V/▲ button to select the Under Scan menu.
  • 4. Press the ENTER or ▶ button.
  • Press the V/▲ and ENTER button to select the scan mode.
  • 6. Press the MENU or ◀ button repeatedly to exit.

(IIII) Sound Menu

A Mode : Standard. Music. Movie. Speech. Custom

Mode
¢ Standa
Movie
() Custom 1
Q
♦ Mov ve 🖙 Enter ▥ Return

  • 1. Press the MENU and V/▲ button to select the Sound menu.
  • 2. Press the ENTER or ▶ button.
  • 3. Press the ▼/▲ and ENTER button to select the Mode.
  • 4. Press the V/▲ and ENTER button to select the desired setting.
  • 5. Press the MENU or ◀ button repeatedly to exit.
E Custom : Bass, Treble, Balance

  • Press the MENU and V/▲ button to select the Sound menu.
  • 2. Press the ENTER or ▶ button.
  • Press the V/▲ and ENTER button to select the Custom.
  • Press the V/▲ and ENTER button to select the desired setting.
  • Press the And ENTER button to adjust the setting value and save.
  • 6. Press the MENU or
Page 11

Setup Menu

--------------------------------------

  • Press the MENU and V/▲ button to select the Setup menu.
  • 2. Press the ENTER or ▶ button.
  • 3. Press the V/▲ and ENTER button to select the Language.
  • Press the V/▲ and ENTER button to select the desired setting.
  • 5. Press the MENU or

E Transparency : High, Medium, Low, Opaque

  • 1. Press the MENU and V/▲ button to select the Setup menu.
  • 2. Press the ENTER or ▶ button.
  • Press the V/▲ and ENTER button to select the Transparency.
  • Press the V/▲ and ENTER button to select the desired setting.
  • 5. Press the MENU or
Svstem ID : 0 – 9

  • 1. Press the MENU and V/▲ button to select the Setup menu.
  • 2. Press the ENTER or ▶ button.
  • Press the V/▲ and ENTER button to select the System ID.
  • Press the V/▲ and ENTER button to select the System ID (0 – 9) corresponding to the Remote ID.
  • 5. Press the MENU or < button repeatedly to exit.

Blue Screen : On, Off

  • 1. Press the MENU and ▼/▲ button to select the Setup menu.
  • 2. Press the ENTER or ▶ button.
  • Press the V/▲ and ENTER button to select the Blue Screen.
  • Press the V/▲ and ENTER button to select the desired setting.
  • 5. Press the MENU or

Reset

"Reset" is available in VGA mode.

See "Setup Menu" in "For VGA mode users" on page 14.

Page 12

VGA mode

🖹 Input Menu

A Source List

  • 1. Press the MENU and ENTER button
  • 2. Press the ENTER or ▶ button and then ▼/▲ button to select the VGA.
  • 3. Press the ENTER or ▶ button to save the setting and exit.

E PIP (Picture In Picture): On. Off

  • 1. Press the MENU and ENTER button
  • 2. Press the V/▲ and ENTER button to select the PIP menu
  • 3. Press the ENTER or ▶ button to see the sub menu.

  • 4. Press the V/▲ and ENTER button to select the desired setting.
    • This menu is available when you selected "On" in PIP

PIP Source select: Video A. Video B. S-Video PIP Size select: , ,

  • G PIP Position select: _ , (1) Press the V/▲ and ENTER button to select
    • the Source. Size or Position.
    • (2) Press the ▼/▲ and ENTER button to select desired setting.
  • 5. Press the MENU or

Edit Name

See " Edit Name" on page 7.

Page 13

Custom : Contrast, Brightness

  • 1. Press the MENU and V/▲ button to select the Picture menu
  • 2. Press the ENTER or ▶ button.
  • Press V/▲ and ENTER button to select the Custom.
  • Press the V/▲ and ENTER button to select the desired setting.

  • 5. Press the ◄ / ▶ and ENTER button to adjust the setting value and save.
  • 6. Press the MENU or ◀ button repeatedly to exit.

E Color Tone : Cool, Normal, Warm, Custom

  • 1. Press the MENU and V/▲ button to select the Picture menu.
  • 2. Press the ENTER or ▶ button.
  • Press the V/▲ and ENTER button to select the Color Tone menu.
  • Press the V/▲ and ENTER button to select the desired setting.
  • 5. Press the MENU or ◀ button repeatedly to exit.

Color Control : Red. Green. Blue

  • 1. Press the MENU and V/▲ button to select the Picture menu.
  • 2. Press the ENTER or ▶ button.
  • 3. Press the V/▲ and ENTER button to select the Color Control menu.
  • Press the V/▲ and ENTER button to select the desired setting.
  • 5. Press the ◄ / ▶ and the ENTER button to adjust the setting value and save.
  • 6. Press the MENU or ◀ button repeatedly to exit.

Image lock

  • 1. Press the MENU and ▼/▲ button to select the Picture menu.
  • 2. Press the ENTER or ▶ button.
  • Press the V/▲ and ENTER button to select the Image Lock menu
  • Press the V/▲ and ENTER button to select the desired setting.

Coarse, Fine, Sharpness

Press the I / • and ENTER button to adjust the setting value and save.

• Position

Press ◄ / ▶ or ▼ / ▲ and ENTER button to adjust the position and save.

5. Press the MENU or ◀ button repeatedly to exit.

Page 14

I Auto Adjustment

  • 1. Press the MENU and V/▲ button to select the Picture menu.
  • 2. Press the ENTER or ► button.
  • 3. Press the V/▲ and ENTER button to select Auto Adjustment menu.

4. Press the MENU or ◀ button repeatedly to exit.

PIP Picture : Contrast, Brightness, Sharpness, Color

This menu is available when you selected "On" in PIP. See " E PIP (Picture In Picture): On, Off" on page 11.

  • * Tint feature is available in NTSC mode
  • Press the MENU and V/▲ button to select the Picture menu.
  • 2. Press the ENTER or ▶ button.
  • 3. Press the V/▲ and ENTER button to select the PIP Picture menu.
  • 4. Press the ▼ / ▲ button to select the desired setting.
  • 5. Press the ◄ / ▶ and ENTER button to adjust the setting value and save.
  • 6. Press the MENU or ◀ button repeatedly to exit.

(I) Sound Menu

See "Sound Menu" on page 9.

Page 15

Setup Menu

See "A Language" in "Setup Menu" on page 10.

Transparency

See " Transparency" in "Setup Menu" on page 10.

System ID

See " System ID" in "Setup Menu" on page 10.

Blue Screen : On, Off

This menu is available when you selected "On" in PIP. See "

  • 1. Press the MENU and ▼/▲ button to select the Setup menu.
  • 2. Press the ENTER or ▶ button.
  • Press the V/▲ and ENTER button to select the Blue Screen.
  • Press the V/▲ and ENTER button to select the desired setting.
  • 5. Press the MENU or ◀ button repeatedly to exit.

Reset : Image, Color

  • 1. Press the MENU and V/▲ button to select the Setup menu.
  • 2. Press the ENTER or ▶ button.
  • 3. Press the V/▲ and ENTER button to select the Reset.
  • Press the V/▲ and ENTER button to select the Image or Color Reset.

  • 5. Press the ◄ / ▶ and ENTER button to select the OK or Cancel.
  • 6. Press the MENU or
Page 16

Troubleshooting

Before requesting service or repair, perform a check as described in the following section. If this does not work, return the unit to the place of purchase or authorized repair agent to undergo adjustment.

Problem Points to check
No image is displayed.
  • Is the connected device outputting a video signal?
  • Is the connection correct? (Page 6)
  • Using the Input Menu, is the correct input mode selected? (Page 7)
No sound is heard.
  • Is the connected device outputting an audio signal?
  • Is the connection correct? (Page 6)
  • Check the volume level is not set to 0. (Page 3)
The display is dark. Are the brightness and contrast set to the correct level? (Page 8 or 12)
The display is flickering.
  • Is there a device nearby which is emitting a strong magnetic field? If so,
    remove it.
Colors displayed in different parts of the display are strange.
  • Is there a speaker or magnet nearby?
    After removing the object, turn the unit off for at least 30 minutes and
    switch it on again.
There is a hissing noise.
  • Effects of this type may be caused by temperature changes in the room
    but do not indicate a fault.
When 2 or more monitors are next
to each other, the display shakes or
there is some distortion.
  • The monitors are interfering with each other. Increase the distance
    between them.
The remote controller cannot be operated.
  • Turn the remote controller toward the IR sensor of the monitor.
    (Within 30° horizontally to the left and right of the IR sensor) (Page 3)
  • Operate the remote controller within 7 m of the IR sensor. (Page 3)
  • Remove or avoid any obstacles when using the remote controller.
  • The battery is spent and should be replaced.
  • Install the battery correctly and make sure the polarity (+, -) is correct.
  • Check that the Remote ID matches the System ID. (2 or 9 on page 5)
Page 17

Specifications

VMC-L2017/L2017P VMC-L2019/L201
Display type SXGA a-Si TFT LCD
Color system NTSC/PAL (Automatic detection)
LCD display 17" active matrix 19" active matrix
TFT LCD panel TFT LCD panel
Viewable size (H x V) 338 x 270 mm/13.3 x 10.6 in. (4:3) 376 x 301 mm/14.8 x 11.9 in. (4:3)
Pixel pitch (H x V) 0.264 x 0.264 mm/0.01 x 0.01 in. 0.294 x 0.294 mm/0.012 x 0.012 in.
Horizontal resolution 1280 x 1024, 500 TV lines 1280 x 1024, 500 TV lines or more (Y/C input mode)
Viewing angle degree Left/Right/Up/Down: 80°
Scanning frequency Horizontal: 31 kHz – 82 kHz, Vertical: 50 Hz – 77 Hz
Contrast ratio 1000:1
Brightness 300 cd/m 2 / 359 cd/yd 2
Response time Tr/Tf 1.3/3.7 m/sec
Display color 1,670 M
Display monitor timing VESA compatible (VGA mode)
Display mode VIDEO A, B/S-VIDEO/VGA
Input connector
Video signal (BNC IN) 2 x Composite sync signal, 1.0 V(p-p), 75 Ω BNC connector
S-Video signal (Y/C IN) Separate Y/C signal, mini-DIN connector
Y signal: 1.0 V(p-p), 75 Ω negative sync
C signal: 0.286 V(p-p ), 75 Ω negative sync
2 x -6.0 dBs (400 mVrms), 2 W (1W+1W) stereo, RCA pin
VGA signal (VGA IN) VGA Monitor Co nnector (15-pin)
Red signal, Green signal, Blue signal: 0.7 v(p-p), 75 12, positive sync
D V (p-p), 75 12 BINC connector
S-video signal (Y/C OUT) Separate Y/C Signal,
V signal: 1.0 V(p-p) 		75 O pegative sync
C signal: 0.286 V(p-p), . 75 Q negative sync
Menu language English/French/German/Spanish/Ita alian/Bussian/Swedish/Portuguese/
Korean/Chinese/Japanese
Power input AC100 – 2 40 V/0.7 A
Operating condition Temperature: -10°C - +40°C/14°F - 104°F
Humidity: 10% – 80% (non-condensation)
Storage condition Temperature: -20°C - +45°C/-4°F - +113°F
Humidity: 5% – 95% (non-condensation)
Power consumption Approx 42 W
Weight Approx. 6.0 kg/13.2 lbs. Approx. 6.9 kg/15.2 lbs.

Features and specifications are subject to change without prior notice or obligations.

Page 18

Dimensions/Angles

Unit: mm (inch)

Model Α В С D Е F G Н
VMC-L2017/L2017P 371 (14.6) 339 (13.4) 272 (10.7) 331 (13.0) 368 (14.5) 37 (1.5) 67 (2.6) 220 (8.7)
VMC-L2019/L2019P 440 (17.3) 378 (14.9) 303 (11.9) 361 (14.2) 398 (15.7) 69 (2.7)

About the tilt adjustment

When adjusting the screen tilt, use a soft cloth to prevent damaging the screen. After adjusting the tilt, check the cables to ensure the monitor is not pulled over.

Page 19

SANYO Electric Co., Ltd.

AB68-00689A L8MAM/US, XE, JP, L8MAN/US, XE, JP (0807KR-TF)

Printed in China

Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use