
A&E Specifications doc 05262006a SANYO VDC-DP7584N
Part 2 PRODUCTS
2.## Color CCD Vandal-Resistant Dome Camera.
A. Description:
1. 1/4” Color PAN-FOCUS Day/Night CCD Vandal-Resistant Dome Network
Camera.
B. General:
1. PAN-FOCUS Technology which uses deep focus techniques allowing
simultaneous focusing on all objects within the field of view.
2. Color, 520 TV lines.
3. 1/4” interline transfer method CCD.
4. Backlight Compensation: Multi-spot metering (High/Normal)/Center-zone
metering photometry
5. White Balance: ATW / AWC / Manual (MWB) / Outdoor (3200) / Indoor
(5600) / Fluorescent (FLUO)
6. Gain Control: High / Normal / Off
7. Gamma Control: 0.45 / 1.
8. Built-in motorized zoom pan-focus auto iris lens, f=2.8-7.3 mm (x2.6), F1.9-
3.0.
9. Built in high speed electronic and slow shutter.
10. Built in Digital Motion Detection.
11. Four privacy mask areas.
12. Alarm input and output with alarm zoom function.
13. Camera ID: 16 characters, adjusting position.
14. Internal sync. / Line Lock.
15. Aperture compensation.
16. IP66 Rated Enclosure.
17. JPEG/POE, Audio Network Capabilities.
18. Remote Access via Internet Explorer.
19. Remote Viewing & Archiving Software: VA-SW3050.
C. Minimum Illumination:
1. Gain Color High:
a. 1.2 lux @ F 1.9 lens @ 50 IRE.
b. 0..48 lux @ F 1.9 lens @ 20 IRE.
2. Gain B/W High:
a. 0.06 lux @ F 1.9 lens @ 50 IRE.
b. 0..024 lux @ F 1.9 lens @ 20 IRE.
D. Connections:
1. Video Out: BNC-Wire.
Page 1 of 2
Contact Sanyo for Specification Changes
(888) 893-7403

A&E Specifications doc 05262006a SANYO VDC-DP7584N
2. Three wire power connections.
3. Manual Zoom/Tele settings.
4. Alarm Input: Common and Alarm in.
5. RS-485 A and B.
E. Electrical Requirements:
1. 24V AC 60hz, 12-15V DC.
2. Operating conditions:
a. Operating: 14o F to 122o F, Humidity 90%.
b. Storage: -4o F to 140o F, Humidity 70%.
3. 3.5 W (without optional boards), 9.5 W (with optional boards), 23.0 W (with
heater)
F. Physical Requirements:
1. Dimensions: 6.4D x 4.5H in.
2. Weight: 3.3 lbs.
G. Manufacturer: Sanyo model VDC-DP7584N
Page 2 of 2
Contact Sanyo for Specification Changes
(888) 893-7403