Page 1
INSTRUCTION MANUAL
COLOUR CCD CAMERA
B/W CCD CAMERA
This Instruction Manual applies to the following four models.
Diese Bedienungsanleitung ist für die folgenden vier Modelle.
Ce manuel d’instructions s’applique aux quatre modèles suivants.
SURFACE TYPE
NORMALE AUSFÜHRUNG
TYPE EN SURFACE
VDC-C1572FP (Colour High Resolution)
VDC-C1572FP (Farbe, hohe Auflösung)
VDC-C1572FP (Haute résolution en couleurs)
VDC-C1572FP
VDC-B1512FP (Black & White)
VDC-B1512FP (Schwarzweiß)
VDC-B1512FP (Noir et blanc)
VDC-B1512FP
IN-CEILING TYPE
AUSFÜHRUNG FÜR DECKENEINBAU
TYPE ENCASTRÉ
VDC-C2572FP (Colour High Resolution)
VDC-C2572FP (Farbe, hohe Auflösung)
VDC-C2572FP (Haute résolution en couleurs)
VDC-C2572FP
VDC-B2512FP (Black & White)
VDC-C2572FP (Schwarzweiß)
VDC-C2572FP (Noir et blanc)
VDC-C2572FP
About this manual
•
Before installing and using the camera, please read this manual carefully.
Be sure to keep it handy for later reference.
Über diese Bedienungsanleitung
•
Lesen Sie bitte vor der Montage und dem Inbetriebnehmen der Kamera
zuerst diese Bedienungsanleitung sorgfältig durch und bewahren Sie sie
zum späteren Nachschlagen auf.
A propos de ce manuel
•
Avant d’installer et d’utiliser la caméra, veuillez lire ce manuel
attentivement. Gardez-le à portée de main pour toute référence ultérieure.
4
L5QA2/XE, XE2, L7QA2/XE, XE2 GB 2002, 5, 10
Page 2
CONTENTS
PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 5
SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
ACCESSORY
•••• Hexagonal Wrench for dome cover. . . . . . . . . . . . 1 pc.
•••• Hexagonal Wrench for lens replacement . . . . . . . 1 pc.
•••• Focal length 8 mm lens . . . . . . . . . . . . . . . . . . . . . 1 pc.
L5QA2/XE, XE2, L7QA2/XE, XE2 GB 2002, 5, 10
English
1
Page 3
PRECAUTIONS
In case of problem
Do not use the camera if smoke or a strange odour comes from the
unit, or if it seems not to function correctly. Disconnect the power
cord immediately, and consult your dealer (or a Sanyo Authorized
Service Centre).
Do not open or modify
Do not open the cabinet, as it may be dangerous and cause
damage to the unit. For internal settings and repairs, consult your
dealer (or a Sanyo Authorized Service Centre).
Do not put objects inside the unit
Make sure that no metal objects or flammable substance get inside
the camera. If used with a foreign object inside, it could cause a
fire, short-circuits or damages.
If water or a liquid gets inside the camera, disconnect the power
cord immediately, and consult your dealer (or a Sanyo Authorized
Service Centre). Be careful to protect the camera from rain, sea
water, etc.
Be careful when handling the unit
To prevent damages, do not drop the camera or subject it to strong
shock or vibration.
Install away from electric or magnetic fields
If installed close to a TV, radio transmitter, magnet, electric motor,
transformer, or audio speakers the magnetic field they generate will
distort the image.
Protect from humidity and dust
To prevent damage to the camera, do not install it where there is
greasy smoke or steam, where the dampness may get too high, or
where there is a lot of dust.
Protect from high temperatures
Do not install close to stoves, or other heat generating devices, such
as spotlights, etc., or where it could be subject to direct sunlight, as
that could cause deformation, discoloration or other damage.
Be careful when installing close to the ceiling, in a kitchen or boiler
room, as the temperature may rise to high levels.
Install where the temperature range will stay between –10°C and
50°C. (no condensation)
Cleaning
Dirt can be removed from the housing by wiping it with a soft cloth. To
remove stains, wipe with a soft cloth moistened with a soft detergent
solution and wrung dry, then wipe dry with a dry soft cloth.
Do not use benzine, thinners or other chemical products on the
housing, as they may cause deformation and paint peeling. Before
using a chemical cloth, make sure to read all accompanying
instructions. Make sure that no plastic or rubber material comes in
contact with the housing for a long period of time, as that may
cause damage or paint peeling.
Mounting Surface
The mounting surface material must be strong enough to secure
the camera.
Plaster- board without a backing plate is not recommended.
ENGLISH
L5QA2/XE, XE2, L7QA2/XE, XE2 GB 2002, 5, 10
2
English
Page 4
INSTALLATION
Main unit installation
•
Preparation
Make four or more holes in the ceiling or wall for the screws that
are to be used to secure the main unit. If embedding the input
power wire and video out cable, make a hole for these cables to be
passed through also.
•
Main unit installation
1
Use the accessory Allen key to remove the four screws (B) that
are securing the dome assembly (A).
2
Insert the foam gasket (C) in between the housing and the
installation surface.
3
Pass the input power wire (E) and video out cable (D) through
the hole made for that purpose.
4
Align the housing assembly (F) with the screw holes that have
been prepared, and then secure it by tightening the four or
more screws (G) (4 mm diameter screws recommended).
5
Determine the lens position in accordance with the location of
the objects to be viewed, and then tighten it in that position.
(Refer to page 4 for lens adjustment details.)
6
Align the viewing window (H) with the lens position.
7
Return the dome assembly (A) to its original position and secure it.
*
(E) Input power wires: 12 V DC 50 Hz
Mounting Screws (4)
Video Out
Cable
Electrical
Box
Foam
Gasket
Input Power
Wires
Housing
assembly
In-ceiling Type
Housing
assembly
Security
Screws (4)
Dome
assembly
Viewing
Window
Dome assembly installation
Camera/VRB
assembly
Surface Type
Electrical Box
Foam Gasket
Housing
assembly
Mounting Screws (4)
(A)
(F)
(C)
(F)
(B)
(C)
(E)
(D)
(F)
(H)
(G)
72 mm φ
L5QA2/XE, XE2, L7QA2/XE, XE2 GB 2002, 5, 10
English
3
Page 5
ADJUSTMENT
These adjustments are for
color cameras.
• The switch positions in the above
figure are the factory presets for the
color standard model.
(For color high resolution model, the
factory setting position of MIRIS (3)
is ON.)
• B/W cameras have the variable
resister (V.R.) for Line lock and Level
as the color cameras.
ADJUSTMENTS
DIP SWITCH
1234 5 678
FLICKERLESS ON (1/100 sec.)
ON
FLICKERLESS OFF (1/60 sec.)
OFF
BACKLIGHT COMPENSATION OFF
ON
BACKLIGHT COMPENSATION ON
OFF
MECHANICAL IRIS
ON
ELECTRONIC IRIS
OFF
120 IRE USER SETTING
ON
100 IRE SETTING
OFF
AGC 26 dB MAXIMUM
ON
AGC 20 dB MAXIMUM
OFF
AUTO TRACKING WHITE BALANCE
OFF OFF OFF
AUTO WHITE BALANCE
OFF ON OFF
PUSH LOCK
OFF ON ON
INDOOR (3200°K)
ON OFF OFF
OUTDOOR (6500°K)
ON ON ON
4200°K
ON OFF ON
4700°K
ON ON OFF
LINE LOCK Nor available
LEVEL Use the V.R. to adjust if the backlight compensation is
set to on but compensation is still not correct.
• PUSH LOCK MODE: If the push lock switch is pressed, White Balance will be adjusted automatically.
12345678
ON
OFF
18
VIDEO OUT
LINELOCK
GND
DC IN
27
36
45
LEVEL
LINE LOCK
PUSH LOCK
L5QA2/XE, XE2, L7QA2/XE, XE2 GB 2002, 5, 10
4
English
Page 6
ADJUSTMENT
Lens adjustment
(I) Horizontal & Vertical Adjustment Screw
(J) Tilt Adjustment Screw
(K) Pan Adjustment Screw
IMPORTANT (Surface Type)
VDC-C1572FP/VDC-B1512FP
When not using the side conduit opening for wire connections,
verify that the conduit plug and set screw are tight.
(I)
(J)
(K)
Angular Limit
Gimbal Bracket
Horizontal & Vertical
Adjustment Screw
Horizontal &
Vertical
Adjustment
Tilt Adjustment Screws
Tilt
Camera Lens -
Perpendicular Direction
Gimbal Bracket
Adjustment Screws
for Camera Rotation
Camera Rotation
SET SCREW
CONDUIT
PLUG
L5QA2/XE, XE2, L7QA2/XE, XE2 GB 2002, 5, 10
English
5
Page 7
SPECIFICATIONS
TV format :
Compatible with PAL TV format
Scanning system :
625 TV lines, 50 fields/sec., 2:1 interlaced
Capturing element :
Interline transmission method, 1/3 inch CCD
fixed capturing element
Effective picture element :
440 K (VDC-C1572FP, VDC-C2572FP)
290 K (VDC-B1512FP, VDC-B2512FP)
Synchronization system :
Internal sync or line lock
Horizontal resolution :
460 TV lines (VDC-C1572FP, VDC-C2572FP)
380 TV lines (VDC-B1512FP, VDC-B2512FP)
Video output level :
1.0 Vp-p/75 Ω (BNC termination)
Video S/N ratio :
50 dB (VDC-C1512FP, VDC-B2512FP)
48 dB (VDC-C1572FP, VDC-C2572FP)
Minimum required
illumination (50IRE)
:
0.2 Lux (VDC-B1512FP, VDC-B2512FP)
3.0 Lux (VDC-C1572FP, VDC-C2572FP)
White balance (color only):
Indoor/outdoor/push lock selectable manually
Backlight compensation
(BLC) function
:
ON/OFF selectable manually, center focus
separate photometry method
B/W cameras: ON only
Backlight compensation
iris level adjustment
:
Manual dial
Flickerless function :
ON/OFF selectable manually
B/W cameras: None
Gain control :
Selectable manually
Built-in lens :
Fixed lens F2.0, f= 4 mm
Manual angle of field
adjustment function
:
Horizontal (pan) → 360°, Vertical (tilt) → 80°
Drip prevention structure :
Simplified
Operating environment :
Temperature –10°C – +55°C
Humidity 90% RH or less
Storage environment :
Temperature –20°C – +70°C
Humidity 95% RH or less
Power voltage/
Power consumption
(Approx.)
:
12 V DC 50 Hz
??? W (VDC-B1512FP, VDC-B2512FP)
??? W (VDC-C1572FP, VDC-C2572FP)
Weight (Approx.) :
1.16 kg (VDC-C1572FP, VDC-B1512FP)
0.58 kg (VDC-C2572FP, VDC-C2512FP)
Dimensions :
139.7 (W) x 94.5 (H) mm, Dome 79.4 mm φ
Features and specifications are subject to change without
prior notice or obligations.
L5QA2/XE, XE2, L7QA2/XE, XE2 GB 2002, 5, 10
6
English
Page 8
1AC6P1P2580-L5QA2/XE, XE2, L7QA2/XE, XE2 (0502KP-CZ) Printed in Korea
L5QA2/XE, XE2, L7QA2/XE, XE2 GB 2002, 5, 10
Loading...