VCC-6594
• Super High-Resolution Technology with
520 Lines of Horizontal Resolution
• 1/3” CCD Image Sensor Approx. 410,000
Picture Elements
• Digital Signal Processing (DSP) Circuit for
Improved Image Quality
• SuperSmart
™
Back Light Compensation
with Multi-Zone Analysis
• High Sensitivity, Minimum Required
Illumination 0.6 Lux @ f1.2,
0.3 Lux @ f1.2 (Gain Up)
• Internal/Line Lock Sync.
• Power Supply 24V AC
1/3” CCD Image Sensor
Super High-Resolution, High-
Sensitivity 520 TVL Color Camera
(Shown with an Optional Lens)
Exview
TM
CCD
Technology
™
ISO
9001
VCC-6594
SUPER HIGH-RESOLUTION,
HIGH-SENSITIVITY 520 TVL
COLOR CAMERA
Main Features
• Super High-Resolution Technology with 520 Lines
of Horizontal Resolution Accomplished By:
1. New Optical Low Pass Filter
2. New Y/C Separation Circuitry
3. Double Horizontal Sampling
4. Chroma-Regulated Horizontal
Aperture Generation
• Digital Signal Processing (DSP) Allows Better
Picture Quality
• Super High-Sensitivity, Minimum Required
Illumination 0.6 Lux @ f1.2, 0.3 Lux @ f1.2 (Gain Up)
• Built-In Interline Transfer Method 1/3” CCD, Approx.
410,000 Picture Elements
• SuperSmart
™
Back Light Compensation
• Both DC and Video type Auto Iris Lenses Applicable
• Internal/Line Lock Sync.
• Electronic Iris Function
• External Adjustment for Mechanical Focus Position
• CS Type Lens Mount
• TTL Auto-White Balance, Auto-Tracking System
• Operates on 24V AC
• No Interference from Magnetic or
Electrostatic Fields
• Built-In Anti-Ground Loop Isolation Transformer
Specifications
MODEL VCC-6594
Scanning System NTSC Standard: 525 lines, 30 Frames/Sec: 2:1 Interlace
Image Device Interline Transfer CCD (Exview)
Image Size 1/3” (Approx. 4.8mm x 3.6mm)
Picture Element 811 X 508 (V) picture elements
768 (H) X 494 (V) effective picture elements
Unit (Pixel) Cell Size 6.35 (H) x 7.4 (V) µm
Geometry No Geometric distortion
Synchronizing System Internal/Line Lock Synchronization
Interlace PLL 2:1 Interlace
Resolution Horizontal 520TV lines
Vertical 350TV lines
Video output level 1.0 Vp-p @ 75 ohms composite
Video S/N ratio More than 48db
Minimum illumination 0.6 lux @ F1.2
(Incandescent Lighting) 0.3 Lux @ f1.2 (GAIN UP)
Gamma Correction 0.45
Gain Control (AGC) Automatic
White Balance ATW/Manual
Backlight Compensation ON/OFF, Manual Switching, 2 Mode Setting: Center Zone Light
Measuring & Multi Zone Light Measuring
Lens Mount CS Mount
Flange Back Adjustment 12.5mm ± 0.5mm
Camera Mount 1/4" 20 UNC (top/bottom selectable)
Controls Auto Iris Lens AI LENS:DC/VIDEO Slide Sw. (Side)
Electronic Iris Slide Sw. (Side)
Electronic Shutter Slide Sw. (Side)
Gain Norm/Hi
Aperutre Norm/Sharp
Backlight Compensation Multi/Center Slide Sw. (Side)
Internal/Line Lock SYNC: INT/L-L Slide Sw. (Side)
White Balance ATW & Manual Slide Sw. (Side)
Sockets Video VIDEO OUT BNC. (Rear)
Auto Iris Lens LENS OUT 4-pin (Side)
Power Supply 24V AC, GND 3-pin term. (Rear)
Electronic Iris Range ON/OFF 1/60-1/100,000 Sec
Environmental Conditions Operating: Temperature -10 degree C to + 50 degree C
Humidity: Within 90% RH
Storage: Temperature -20degree C to + 70 degree C
Humidity: Within 70% RH
Power Indicator LED
Power Requirement 24V AC, 60Hz
Power Consumption 2.8W (w/AI Len) 2.1W (w/o AI Lens)
Dimensions (W x H x D) 2.2 x 1.8 x 3.9 inches (56 x 45 x 99.5mm)
(Without lens mount and camera mount)
Weight 0.68 lbs. (310g)
SANYO Security Video
21605 Plummer Street
Chatsworth, CA 91311
Phone: (818) 998-7322, ext. 286
Fax: (818) 717-2716
Technical Support: (888) 66-SANYO
www.sanyocctv.com
Specifications and product design are subject to change without notice.
©2001 SANYO Security Video
Loading...