Sanyo VCC-5774, VCC-5774M User Manual

INSTRUCTION MANUAL

COLOR CCD CAMERA

About this manual

Before installing and using the camera, please read this
manual carefully. Be sure to keep it handy for later reference.

VCC-5774
VCC-5774M

SANYO INDUSTRIAL VIDEO

COLOR VIDEO CAMERA LIMITED WARRANTY

In order to obtain warranty service, the product must be delivered to and picked up from an Authorized Sanyo Service Center at the user’s expense, unless specifically stated
otherwise in this warranty. The names and addresses of Authorized Sanyo Service Centers may be obtained by calling the toll-free number listed below.

For product operation, authorized service center ref erral, servi ce assistance or problem resolution, call

For accessories and/or parts, call

THIS WARRANTY IS VALID ONLY ON SANYO PRODUCTS PURCHASED OR RENTED IN THE UNITED STATES OF AMERICA, EXCLUDING ALL U.S. TERRITORIES AND
PROTECTORATES. THIS WARRANTY APPLIES ONLY TO THE ORIGINAL RETAIL PURCHASER OR END-USER. THE ORIGINAL DATED BILL OF SALE, SALES SLIP OR
RENTAL AGREEMENT MUST BE SUBMITTED TO THE AUTHORIZED SANYO SERVICE CENTER AT THE TIME WARRANTY SERVICE IS REQUESTED.
Subject to the OBLIGATIONS above and EXCLUSIONS below, SANYO Fisher Company warrants this SANYO product against defects in materials and workmanship for the
periods specified below. SFC will repair or replace (at its option) the product and any of its parts which fail to conform to this warranty. The warranty period commences on
the date the product was first purchased or rented at retail.

This warranty does not cover (A) the adjustment of customer-operated controls as explained in the appropriate model’s instruction manual, or (B) the repair of any product
whose serial number has been altered, defaced or removed.
This warranty shall not apply to the cabinet or cosmetic parts, batteries or routine maintenance.
This warranty does not apply to uncrating, setup, installation, removal of the product for repair or reinstallation of the product after repair.
This warranty does not apply to repairs or replacements necessitated by any cause beyond the control of SFC including, but not limited to, any malfunction, defect or failure
caused by or resulting from unauthorized service or parts, improper maintenance, operation contrary to furnished instructions, shipping or transit accidents, modification or
repair by the user, abuse, misuse, neglect, accident, incorrect power line voltage, fire, flood or other Acts of God, or normal wear and tear.
The foregoing is in lieu of all other expressed warranties and SFC does not assume or authorize any party to assume for it any other obligation or liability.
SFC DISCLAIMS ALL OTHER WARRANTIES EXPRESS OR IMPLIED, WITH REGARD TO THIS PRODUCT (INCLUDING THE WARRANTIES OF MERCHANTABILITY AND
FITNESS). IN NO EVENT SHALL SFC BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM THE OWNERSHIP OR USE OF THIS
PRODUCT OR FOR ANY DELAY IN THE PERFORMANCE OF ITS OBLIGATIONS UNDER THIS WARRANTY DUE TO CAUSES BEYOND ITS CONTROL. SFC’S LIABILITY
FOR ANY AND ALL LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER, ARISING OUT OF OR IN CONNECTION WITH THE SALE, USE OR
OWNERSHIP OF THIS PRODUCT INCLUDING WARRANTOR’S NEGLIGENCE, ALLEGED DAMAGED OR DEFECTIIVE GOODS, WHETHER SUCH DEFECTS ARE
DISCOVERABLE OR LATENT, SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCT.

For your protection in the event of theft or loss of this product, please fill in the information below for you own personal records.

Model No. ________________________________________________________________ Serial No._________________________________________________________________

Date of Purchase __________________________________________________________ Purchase Price ____________________________________________________________

Where Purchased _________________________________________________________________________________________________________________________________________

CUSTOMER INFORMATION 1-800-421-5013

Weekdays 8:30 AM – 5:00 PM Pacific Time

PARTS ORDER INFORMATION 1-800-726-9662

Weekdays 8:30 AM – 5:00 PM Pacific Time

LABOR PARTS IMAGE DEVICE

3 YEARS 3 YEARS 3 YEARS

OBLIGATIONS

EXCLUSIONS

ATTENTION

(Located on back or bottom side of unit.)

Depending on the conditions of use, installation
and environment, please be sure to make the
appropriate settings and adjustments. If you
need help with installation and/or settings,
please consult your dealer.

English 1

CONTENTS

INFORMATION TO USER.............. 3

PRECAUTIONS .............................. 5

PARTS NAMES.............................. 7

MOUNTING THE LENS.................. 9

CONNECTIONS.............................. 11

FLANGE-BACK ADJUSTMENT...... 13

SETTINGS ...................................... 14

TROUBLESHOOTING .................... 17

SPECIFICATIONS........................... 18

ACCESSORIES................................ 20

FEATURES

• Built-in interline transfer method 1/3" CCD,

approx. 410,000 picture elements

• Low smear, anti-blooming, low lag, no

burning and no geometric distortion using
the CCD solid state image device.

• 100% solid state components giving

excellent immunity to shock and vibration

• Not subject to interference from magnetic or

electrostatic fields

• VCC-5774 (AGC: ON)

High sensitivity, minimum required
illumination is 1.4 lux (F1.2)

VCC-5774M (AGC: OFF)

High sensitivity, minimum required
illumination is 7 lux (F1.2)

• Horizontal resolution, more than 480 TV lines

• Equipped with connectors for AC 24 V and

DC 12 V power supply.

About VCC-5774M for a Casino

Designed to produce the best picture especially
under halogen light conditions with manual iris
lenses.
Design features:

Fixed Gain

Instead of AGC, Fixed Gain is adopted for pictures
with less video noise under low light conditions.

Automatic White Balance (AWB)

AWB is adjusted for best results under halogen
light (Color temperature: approx. 3000K)
conditions.

Note: Under fluorescent light or sun light

conditions (Approx. 5000K) a bluish
image may be produced.

Gamma curve

Gamma Curve makes dark parts of the image
brighter. With Line Lock mode, noise might be
noticeable. In this case, switch to Internal Sync.
(Internal Sync is selected as default.)

2 English

INFORMATION TO USER

Safety Guard

THIS SYMBOL INDICATES THAT THERE
ARE IMPORTANT OPERATING AND
MAINTENANCE INSTRUCTIONS IN THE
LITERATURE ACCOMPANYING THIS
UNIT.

WARNING:

TO PREVENT THE RISK OF FIRE OR
ELECTRIC SHOCK , DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.

This installation should be made by a qualified
service person and should conform to all local
codes.

English 3

For the customers in Canada

This Class B digital apparatus complies with
Canadian ICES-003.

Pour la clientèle canadienne

Cet appareil numerique de la Classe B est
conforme a la norme NMB-003 du Canada.

INFORMATION TO USER

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by Sanyo may void the user’s authority to
operate this camera.

4 English

PRECAUTIONS

In case of problem

Do not use the camera if smoke or a strange odour
comes from the unit, or if it seems not to function
correctly. Disconnect the power cord immediately,
and consult your dealer (or a Sanyo Authorized
Service Centre).

Do not open or modify

Do not open the cabinet, as it may be dangerous
and cause damage to the unit. For internal settings
and repairs, consult your dealer (or a Sanyo
Authorized Service Centre).

Do not put objects inside the unit

Make sure that no metal objects or flammable
substance get inside the camera. If used with a
foreign object inside, it could cause a fire,
short-circuits or damages.
If water or a liquid gets inside the camera, disconnect
the power cord immediately, and consult your dealer
(or a Sanyo Authorized Service Centre). Be careful to
protect the camera from rain, sea water, etc.

English 5

Be careful when handling the unit

To prevent damages, do not drop the camera or
subject it to strong shock or vibration.

Install away from electric or magnetic
fields

If installed close to a TV, radio transmitter, magnet,
electric motor, transformer, audio speakers the
magnetic field they generate will distort the image.

Protect from humidity and dust

To prevent damages to the camera, do not install it
where there is greasy smoke or steam, where the
dampness may get too high, or where there is a lot
of dust.