SANYO STK4034X Datasheet
Thick Film Hybrid IC
Ordering number : EN4673A
O3096HA (OT)/51694TH (OT) 5-2263 No. 4673-1/3
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN
AF Power Amplifier (Split Power Supply)
(45 W min, THD = 0.008%)
STK4034X
Features
• Miniature package allows audio sets to be made
slimmer.
• Pin-compatible amplifiers with outputs of 30 to
100 W are available.
• Facilitates thermal design of slim stereo sets by
distributing the heat dissipating ICs in the set.
• Current mirror circuit application reduces distortion to
0.008%.
• Supports the design of supplementary electronic circuits
(thermal shutdown, load short protection, and pop noise
muting at power on and off).
Package Dimensions
unit: mm
4062
Specifications
Maximum Ratings at Ta = 25°C
Note: Use a constant-voltage power supply as the test power supply unless otherwise specified.
* Use the transformer power supply shown on the next page when measuring the available time for load shorted and the output noise voltage.
Recommended Operating Conditions at Ta = 25°C
Operating Characteristics
at Ta = 25°C, V
CC
= ±35 V, RL= 8 Ω, VG = 40 dB, Rg= 600 Ω, 100 k LPF ON, RL(noninductive load)
Note: Use a constant-voltage power supply as the test power supply unless otherwise specified.
* The output noise voltage is the peak value measured with an averaging rms scale volt meter. The noise voltage waveform should not include
pulse noise.
Parameter Symbol Conditions Ratings Unit
Maximum supply voltage VCCmax ±50 V
Thermal resistance
θj-c 1.8 °C/W
Junction temperature Tj 150 °C
Operating substrate temperature Tc 125 °C
Storage temperature Tstg –30 to +125 °C
Available time for load shorted t
S
* VCC= ±35 V, RL= 8 Ω, f = 50 Hz, PO= 45 W 2 s
Parameter Symbol Conditions Ratings Unit
Recommended supply voltage V
CC
±35 V
Load resistance R
L
8 Ω
Parameter Symbol Conditions
Ratings
Unit
min typ max
Quiescent current I
CCO
VCC= ±41 V 15 120 mA
Output power
P
O
(1) THD = 0.008%, f = 20 Hz to 20 kHz 45
W
P
O
(2) VCC= ±31 V, THD = 0.04%, RL= 4 Ω, f = 1 kHz 50
Total harmonic distortion THD P
O
= 1.0 W, f = 1 kHz 0.008 %
Frequency response fL, f
H
PO= 1.0 W, dB 20 to 50 k Hz
Input resistance r
i
PO= 1.0 W, f = 1 kHz 55 kΩ
Output noise voltage V
NO
* VCC= ±41 V, Rg = 10 kΩ 1.2 mVrms
Neutral voltage V
N
VCC= ±41 V –70 0 +70 mV
+0
–3
[STK4034X]
No. 4673-2/3
STK4034X
Equivalent Circuit
Sample Application Circuit: Single Channel 45 W (minimum) AF Power Amplifier
Specified Transformer Power Supply
(MG-200 equivalent)
Loading...