Sanyo RP-444, RP-X4A User Manual

INSTRUCTION

RP-444

MANUAL

RP-X4A

English P1-P2
Español P3-P4
Português P5-P6

P1

ENGLISH

INST ALLING A BA TTERY

One AAA battery (not supplied)

Cautions:

• Match the polarity symbols
(+ and -) marked inside the
battery compartment.

• Always use a fresh battery
of the required size.

If the unit is not to be used for a prolonged period, remove the
batteries to avoid leakage. In the interest of environmental
safety, dispose of batteries safely.

2

1

3

USING THE RADIO

OFF/AM/FM ST – switch to the VOLUME – rotate to

desired AM or FM ST band. adjust the volume.
And switch to select (see “Listening Safety”)
the power OFF

Hand Strap (not supplied)
–pass the narrow end of
the strap through the strap
through the loop.

- for
connecting
the supplied
earphones

TUNING- rotate to select
your favorite station

Belt Clip (on the back of the radio) –
To remove the clip, press down in the
slot under the clip and slide it in the
opposite directi on.

To improve the reception:

P2

ENGLISH

• For the best FM reception, fully
uncoil the earphones’ cord.

• The AM antenna is built-in.
Move the radio to improve
AM reception.

CAUTION

High volume levels can create potentially dangerous situations by
drowning out surrounding sounds. Use cautiously when bicycling
or jogging while operating the unit, and obey all applicable laws.
Do not play your earphones at a high volume. Hearing experts
advise against continuous extended play. If you experience a
ringing in your ears, reduce volume or discontinue use.

SPECIFICATIONS

Frequency Range ………………………….…..… AM: 525-1610 kHz

FM: 87.5-108 MHz

Intermediate Frequency ……..………………….……. AM: 465 kHz

FM : 10.7 MHz

Power Source …………………………………....….… 1 AAA Battery

Dimensions …………………………….……….. 84.5 x 43.5 x 20 mm
Weight (without battery and earphone) ………..……………… 39.5g
Output Power (maximum) ………………………...…………… 5 mW
Headphone Impedance…………………….….…….………. 32 Ohm
Included Accessories …………………………... Stereo Earphones

Detachable Belt Clip

Your SANYO product is designed and manufactured with
high quality materials and components which can be
recycled and reu sed .
This symbol means that electrical and e lectronic equi pment,
at their end-of-life, should be disposed of separately from
your househo l d wa ste .
Please, dispose of this equipment at your local community
waste collection/recycling centre.
In the European Union there are separate collection
systems for used electri- cal and electronic product.
Please, help us to conserve the environment we live in!