Sanyo PLC-XW250, PLC-XW200 User Manual

Brightness(Lamp mode : “High” &
Image mode: “Dynamic”)

Model name

PLC-XW200, XW250 series

Panel

0.55 inch TFT p-Si x 3
No. of pixels

2,359,296 (1024 x 768 dots)
Projection lamp

220W UHP
XW250 : 2,600 lm

XW200 : 2,200 lm

Contrast

500:1 (Lamp mode : “High” & Image mode: “Dynamic”)

Uniformity

85% (corner to center)
Projection lens
Screen size
Zoom / Focus

F2.0-2.15, f = 18.38 - 22.06 mm / 0.72” - 0.87”
40” - 300 ”, 1.3m - 11.8m / 4.3’ - 38.7’, U:D = 6:1
100” at 3.3m - 3.9m, 10.8‘ - 12.8’, 1 : 1.2 Manual driven

HDTV signals

480i, 480p, 575i, 575p, 720p, 1035i and 1080i
Color systems

PAL / SECAM / NTSC / NTSC4.43 / PAL-M/N
Video Signal

Composite, S-Video, Component

Computer Terminal

D-sub15 x 1 : Analog RGB Input
(Component and S-video input with conversion cable)
D-sub15 x 1 : Analog RGB Input or Monitor out

Video Terminal

RCA x 1 : Composite video
Computer compatibility

(UXGA/WXGA)/SXGA/XGA/SVGA/VGA/MAC

Audio

Mini-Jack (stereo) x 1 : Input (for Computer & Video)
Mini-Jack (stereo) x 1 : Output (variable audio out)

Communication Terminal

RJ-45 (LAN) D-sub 9pin (RS 232C)

Presentation Tool

Freeze / Digital Zoom / No Show / etc
Other Feature

Progressive, 3-2 & 2-2 pull down, User Logo
Scanning frequency

H/V sync 15 - 100kHz, 50 - 100Hz, Dot clock 140 MHz
Sound output

1.0 W Mono
Fan Noise

29dBA (Lamp mode “Eco”)
Voltage

100V-120V AC, 200V-240V AC

Power consumption

XW250 : 212W / 296W (Lamp mode: Eco / High)
XW200 : 212W / 272W (Lamp mode: Eco / High)

Standby power consumption

0.4W / 4.3W (Standby mode: Eco/ Network)
Dimensions (W x H x D)

13.1” x 3.4 “ x 9.7” (not including protruding parts)
Weight

5.5 lbs.

Ultra Por table Multimedia Projector PLC-XW250/XW200

High Cost Performance with Easy Setup Function

PLC-XW250 2600 lumens
PLC-XW200 2200 lumens

Easy Setup Function

 

PLC-XW250 / XW200 provides "Auto Setup Function" that
corrects vertical shape distortion by searching for an input
signal and detecting projector
incline, reducing setup time.
Furthermore, the "Screen
Guidance Function" allows
projector set up according to
the displayed guidance. This
function provides all an easy
guide to projection.

Wired LAN(RJ-45) for projector control



This model is equipped with Wired LAN(RJ-45) that allows
you to manage and control projector via Network. It is
possible to check the operating time of lamp and manage
the warning notification by Email. Power ON/OFF and
switching of input sigal can be controled. You can save a lot
of time with manage and control.

Enviroment friendly power consumption in



standby mode: 0.4w

We’ve reduced the power consumption in standby mode to

0.4w. Caring for the enviroment is required due to global
warming and CO2 reduction. The standby power consumption
is reduced by 84% compared to previous model.

Other Features

• D-sub 15pin for Input, D-sub 15pin for Input or Monitor out

• Direct power off (AC plug out before turned-off)

• 18 languages (Operation menu) … New: Thai, Turkish

• Colorboard (4 color) mode, Security:PIN code lock, Key lock

Specifications

* Replacement Lamp Type No.: 610 345 2456
* 1 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international

standards.
* 2 For analog signal only, limitations on certain output signals. Does not support all types of input signals.
* Specifications as of May 26, 20 09, subject to change.
* All product names and company names are trademarks or registered trademarks of their respective

companies.

SANYO Presentation Technologies

Toll free:

888-337-1215 www.sanyoprojectors.com

© 2009 SANYO North America Corporation.