Sanyo PLC-XU88 Product Sheet

3000 ANSI LUMENS z TRUE XGA z MULTIMEDIA PROJECTOR

–

A

–

V

V

•

y

PLC-XU88

XGA Ultraportable Multimedia Projector

ULTRA-COMPACT, FULLY PORTABLE XGA DESIGN

Not much larger than a laptop PC, the PLC-XU88 weighs less than 7.5 pounds
and delivers true XGA, 3000 A. L. picture quality in a versatile, go-anywhere
system. May also be ceiling or inverse mounted for enhanced versatility.

AUTO VERTICAL KEYSTONE CORRECTION

The PLC-XU88 automatically compensate for keystone picture distortion.

F1.6-2.5 ZOOM LENS WITH 1/2X TO 16X DIGITAL ZOOM

Comes with its own 1:1.57 zoom lens which can throw a crisp bright 100”
diagonal image from a distance of only 9.2′. The 1/2X to 16X digital zoom helps
highlight important program segments. Also auto vertical keystone and keystone
correction (vertical +

TWO COMPUTER INPUTS (DVI-I AND D-SUB)

The PLC-XU88 has two computer input terminals – DVI-I input and D-sub input.
The D-sub terminal can be switched to be used as an analog RBG monitor out
for the DVI-I input. This terminal outputs only incoming RGB analog signals from
COMPUTER IN 1 / DVI-I terminal.

NETWORKING CAPABILITY

The PLC-XU88 is equipped with SANYO’s exclusive PJ-Net Master Network
Interface software for wired and wireless networking, a common feature among
SANYO’s extensive line of commercial projectors. Networking allows the
monitoring of projector functions and operation from a long distance via a web
browser for up 15,000 Sanyo projectors. Emails can be sent automatically to
report operating status. The wireless interface is compatible with IEEE802.11b/g
standards, offering transfer speeds up to 54Mbps and providing WEP 64/128-bit
security as well as, WPA and WPA2 security.

MEMORY VIEWER ALLOWS SD CARD

The PLC-XU88’s built-in Memory Viewer can use an SD card memory dedicated
to the projector. With Memory Viewer, projected images can be edited with a
slide converter (Index data), bitmap data and JPEG data.

SECURITY FEATURES

A PIN code lock provides a setting for security. The PLC-XU88 projector cannot
be operated without a four digit number.

USER-SPECIFIED START-UP SCREEN

To create a smoother, more professional presentation, logo and image files may
be captured for display during the projector’s countdown sequence at start-up.

POWER-OFF AND GO

No need to wait for the projector to cool down. You can disconnect the power
cord right after your presentation.

VARIABLE AUDIO OUT

This convenient feature allows the user to control the audio level right from the
projector. The centralization of video and audio controls from the projector helps
in educational applications by ensuring the technical quality of the presentation
and eliminating the fuss of separate outside audio controls.

20 degrees), allow for optimal set-up.

PRESENTATION TECHNOLOGIES

21605 Plummer Street
Chatsworth, CA 91311
Ph: 888-337-1215 (toll-free)
Fax [phone]
www.san

oprojectors.com

Specifications

Resolution
Brightness
Uniformity
LCD Panel System
Number of Pixels
Contrast Ratio

(Lamp Mode ”Auto”, Image Mode ”Dynamic”)

Image Size (diagonal)

spect Ratio
Throw Distance
Zoom/Focus
Zoom Ratio
Up/Down Ratio
Digital Keystone Correction
Projection System

Vertical: +/- 20 w/Auto Keystone correction

Dichroic mirror & X prism system w/PBS

Projection Lens
Lens Throw Ratio
Projection Lamp
Scanning Frequency

H Sync: 15-100kHz, V Sync: 50-100Hz

Dot Clock
Color System
Computer Compatibility

PAL/PAL-M/PAL-N/SECAM/NTSC/NTSC4.43

UXGA, WXGA, SXGA, XGA, SVGA, VGA, MAC

Sound Output

oltage

100-120 200-240V AC (auto Voltage) ; 50/60 Hz

BTU Rating
dB Rating
Power Consumption
Dimensions (WxHxD)

13.2” x 3.1” x 9.4” (not including protrusion)

Net Weight
User Maintenance

Clean air filters, replace lamp assembly

PC Input Terminals

• Audio x 1 (Stereo mini-jack : common)

ideo Input Terminals

Composite Video (RCA x 1)• S-Video (Mini-DIN 4-pin)

• Component Video (D-Sub15 input w/optional cable)

• Audio for Component Video(stereo mini-jack)

Output Terminals

D-Sub15 x 1 (switchable In/monitor out)

Service Port Terminal
Mouse Control Port
Other Terminals

• RJ45 for Wired LAN • SD Card Slot for Viewer

Included Accessories

• Owner’s Manual(CD-ROM & Quick Reference Guide)

• VGA Cable • Strap & Screw for Lens Cap • PIN Code
Label • AC Power Supply Cord • Lamp replace Label

Optional Accessories

610 334 9565 – Replacement Lamp

• 645 093 6951 – Replacement Remote

• POA-CA-COMPVGA – VGA/Component Video Cable

• POA-RCKIT04 – Presentation Kit (Remote Control w/USB

Infrared Receiver)

Warranty

Because its products are subject to continuous improvement, SANYO reserves the right to
modify product design and specifications without notice and without incurring any obligations.

Remote Control

Three years parts and labor; 90 days original lamp;

XGA (1024 x 768)

3000 ANSI Lumens

85% (Corner to Center)

0.63” TFT p-Si x 3 w/Micro Lens
2,359,296 (786,432 x 3)

500:1

40”

300”

4:3

3.6’

43.0’

Manual

1:1.57

9:1

F1.6-2.5 / f0.70”-1.11”

1.38-2.17:1
220W UHP

140MHz

One-piece, 1-watt Mono

938 / 665 (Eco mode)

29 dB (Eco mode)

275W / 195W (Eco mode)

7.5 lbs

DVI-I x 1 (Digital with HDCP / Analog)

• D-sub15 x 1(In/Monitor out)

• R & L/mono audio (RCA x 2)

• Variable Audio (stereo mini-jack)

Mini DIN 8-pin

USB Type B x 1

I/R Remote Control • 2 AAA Batteries

Quick Repair Program under warranty

Rear Back Panel

Issued 1/08 ©2008 SANYO