Sanyo PLC-XU88 User Manual

Download

Owner’s Manual

Network Supported

□ Wireless LAN

IEEE802.11b/g

□ Wired LAN

100-Base-TX/10-Base-T

Memory Viewer

□ SD Card Memory Viewer

*

Refer to the owner’s manuals below for details

about network and memory viewer function.

■Network Set-up and Operation

■Memory viewer

Multimedia Projector

MODEL PLC-XU88

Features and Design

This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology.

◆ Compact Design

This projector is designed compact in size and weight.

It is easy to carry and installed anywhere you wish to use.

◆ Simple Computer System Setting

The projector has the Multi-scan system to conform to

almost all computer output signals quickly (p.31). Up to UXGA resolution can be accepted.

◆ Useful Functions for Presentations

- The digital zoom function allows you to focus on the crucial information during a presentation (p.38).

- Blackboards* can be used as a projection screen. *The board color is limited to Green (pp.35, 42).

◆

Power Management

Th e Power m anage ment funct ion red uces power

consumption and maintains the lamp life (p.51).

◆ Lamp Control

Brightness of the projection lamp can be selected

(pp.27, 52).

◆ Quick Termination

The AC power cord can be unplugged immediately

after turning off the projector without waiting for the termination of the cooling fan rotation (p.22).

◆ Logo Function

The Logo function allows you to customize the screen

logo (pp.48–49). You can capture an image for the screen logo and use it for the starting-up display or between presentations.

◆ Multilanguage Menu Display

Operation menu is available in 16 languages; English,

German, French, Italian, Spanish, Portuguese, Dutch, Sw edish, Finnis h, Polish, Hungarian , Romanian , Russian, Chinese, Korean, and Japanese (p.46).

◆ Security Function

The Security function helps you to ensure security

of the projector. With the Key lock function, you can lock the operation on the top control or remote control (p.53). PIN code lock function prevents unauthorized use of the projector (pp.21, 53–54).

◆

Helpful Maintenance Functions

Lamp and filter maintenance functions provide for

better and proper maintenance of the projector.

◆ LAN Network Function

This projector is loaded with the Wired and Wireless

LAN network function. You can project an image on a computer as well as operate and manage the projector via network. For details, refer to the owner’s manual “Network Set-up and Operation.”

◆ Memory Viewer Function

Ins e rt the dedica ted SD card memo r y in to the

projector to project images or presentation data stored within. You do not have to carry computers or other equipment for a presentation. *SD card memory is not supplied with the projector. For details, refer to the owner’s manual of Memory viewer.

◆ Input Search Function

Input signal can be searched automatically.(p.50)



Notes:

• The On-Screen Menu and figures in this manual may differ slightly from the product.

• The contents of this manual are subject to change without notice.

Trademarks

Each name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation.

Features and Design . . . . . . . . . . . . . . . . . . .3

Table of Contents .

. . . . . . . . . . . . . . . . . . . . .4

To the Owner.

. . . . . . . . . . . . . . . . . . . . . . . . .5

Safety Instructions .

. . . . . . . . . . . . . . . . . . . .6

Air Circulation 7

Installing the Projector in Proper Directions 7

Moving the Projector

Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Part Names and Functions .

. . . . . . . . . . . . .9

Front 9

Back 9

Bottom 9

Rear Terminal 10

Top Control 11

Remote Control 12

Laser Pointer Function 13

Pointer Function 13

Wireless Mouse Operation 14

Remote Control Code 14

Remote Control Battery Installation 15

Remote Control Operating Range 15

Adjustable Feet 15

Installation. . . . . . . . . . . . . . . . . . . . . . . . . . .16

Positioning the Projector 16

Connecting the AC Power Cord 17

Connecting to a Computer 18

Connecting to Video Equipment 19

Connecting to Component V

ideo Equipment 20

Basic Operation . . . . . . . . . . . . . . . . . . . . . .21

Turning On the Projector 21

Turning Off the Projector 22

How to Operate the On-Screen Menu 23

Menu Bar 24

Zoom and Focus Adjustment 25

Auto Setup Function 25

Keystone Correction 25

Sound Adjustment 26

Remote Control Operation 27

Computer Input . . . . . . . . . . . . . . . . . . . . .29

Input Source Selection

(RGB: Computer 1 (Analog)/Computer 2 ) 29

Input Source Selection

(RGB(PC digital), RGB(A

V HDCP)) 30

Computer System Selection 31

Auto PC Adjustment 32

Manual PC Adjustment 33

Image Mode Selection 35

Image Adjustment 36

Screen Size Adjustment 37

For zooming in and out the images 38

Video Input . . . . . . . . . . . . . . . . . . . . . . . . . .39

Input Source Selection (Video, S-video) 39

Input Source Selection

(Component, RGB Scart 21-pin)

Video System Selection 41

Image Mode Selection 42

Image Adjustment 43

Screen Size Adjustment 45

Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

Setting 46

Maintenance and Cleaning . . . . . . . . . . . . .57

WARNING TEMP. indicator 57

Cleaning the Filter 58

Resetting the Filter Counter 58

Attaching the Lens Cap 59

Cleaning the Projection Lens

Cleaning the Projector Cabinet 59

Lamp Replacement 60

Resetting the Lamp Counter 61

Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . .62

Troubleshooting 62

Menu Tree 66

Indicators and Projector Condition 68

Compatible Computer Specifications 69

Technical Specifications 71

Optional Parts 72

PJ Link Notice 73

Configurations of Terminals 74

PIN Code Number Memo 75

Lamp Replacement Label 75

Dimensions 76

To the Owner

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK)

. NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REF E R S E RVI C ING TO Q UALI F IED SER

VICE PERSONNEL.

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE OW NE R' S MANUAL WITH THIS UNIT.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Before installing and operating this projector, read this manual thoroughly. This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintains it in good condition for many years to come. Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents. If your projector seems to operate improperly, read this manual again, check operations and cable connections and try the solutions in the “Troubleshooting” section in the back of this booklet. If the problem still persists, contact the dealer where you purchased the projector or the service center.

Safety Precaution

CAUTION

DO NOT SET THE PROJECTOR IN GREASY, WET, OR SMOKY CONDITIONS SUCH AS IN A KITCHEN TO PREVENT A BREAKDOWN OR A DISASTER. IF THE PROJECTOR COMES IN CONTACT WITH OIL OR CHEMICALS, IT MAY BECOME DETERIORATED.

READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS APPLIANCE T

O RAIN OR MOISTURE.

– This projector produces intense light from the projection

lens. Do not stare directly into the lens, otherwise eye damage could result. Be especially careful that children do not stare directly into the beam.

– Install the projector in a proper position. Otherwise it may

result in fire hazard.

– Allowing the proper amount of space on the top, sides,

and rear of the projector cabinet is critical for proper air circulation and cooling of the unit. The dimension shown here indicate the minimum space required. If the projector is to be built into a compartment or similarly enclosed, these minimum distances must be maintained.

– Do not cover the ventilation slot on the projector. Heat

build-up can reduce the service life of your projector, and can also be dangerous.

– If the projector is unused for an extended time, unplug

the projector from the power outlet.

SIDE and TOP REAR

NOTE: This symbol and recycle system are applied

to EU countries only and not applied to the

countries in the other area of the world.

Your SANYO product is des igned and manufactured with high quality materials and components which can be recycled and reused.

This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of separately from your household waste.

Plea s e di s pose of this equipm e nt at you r loc a l community waste collection/recycling centre. In the European Union there are separate collection systems for used electrical and electronic products.

Please help us to conserve the environment we live in!

CAUTION

Not f or use in a comp uter roo m as defin ed in the Standard for the Protection of Electronic Computer/Data Processing Equipment, ANSI/NFPA 75.

Ne peut être utilisé dans une salle d’ordinateurs telle que défini e dans la norme ANSI/NFPA 75 Standard for Protection of Electronic Computer/Data Processing Equipment.

Safety Instructions

All the safety and operating instructions should be read before the product is operated.

Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.

Fo llow all warnings and i nstructi ons mar ked on th e projector.

For added protection to the projector during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage due to lightning and power line surges.

Do not expose this unit to rain or use near water... for example, in a wet basement, near a swimming pool, etc...

Do not use attac h ments not rec o mmend e d by t h e manufacturer as they may cause hazards.

Do not place this projector on an unstable cart, stand, or table. The projector may fall, causing serious injury to a child or adult, and serious damage to the projector. Us e only with a cart or sta nd re com men ded by the manufacturer, or sold with the projector. Wall or shelf mounting should follow the manufacturer’s instructions, and sh o u l d us e a m o u n t ing kit app r o v e d by th e manufacturers.

An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

Slots and openings in the back and bottom of the cabinet are provided for ventilation, to ensure reliable operation of the equipment and to protect it from overheating.

The openings should never be covered with cloth or other materials, and the bottom opening should not be blocked by placing the projector on a bed, sofa, rug, or other similar surface. This projector should never be placed near or over a radiator or heat register.

This projector should not be placed in a built-in installation such as a book case unless proper ventilation is provided.

Never push objects of any kind into this projector through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the projector.

Do not install the projector near the ventilation duct of air-conditioning equipment.

This projector should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied, consult your authorized dealer or local power company.

Do not overload wall outlets and extension cords as this can result in fire or electric shock. Do not allow anything to rest on the power cord. Do not locate this projector where the cord may be damaged by persons walking on it.

Do not attempt to service this projector yourself as ope ning or remo v ing Cove rs may expos e y ou to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

Unplug this projector from wall outlet and refer servicing to qualified ser vice perso nnel under the follow ing conditions: a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the projector. c. If the projector has been exposed to rain or water. d. If the projector does not operate normally by following

the operating instructions. Adjust only those controls that are covered by the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the projector to normal operation.

e. If the projector has been dropped or the cabinet has

been damaged.

f. When the projector exhibits a distinct change in

performance-this indicates a need for service.

When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or injury to persons.

Up on completion of a ny service or re pai rs to this projector, ask the service technician to perform routine safety checks to determine that the projector is in safe operating condition.

Safety Instructions

Openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered.

CAUTION

Hot air is exhausted from the exhaust vent. When using or installing the projector, the following precautions should be taken. – Do not put any flammable object or spray can near the

projector, hot air is exhausted from the air vents.

– Keep the exhaust vent at least 3’ (1 m) away from any

objects.

– Do not touch a peripheral part of the exhaust vent,

especially screws and metallic parts. These areas will become hot while the projector is being used.

– Do not put anything on the cabinet. Objects put on the

cabinet will not only get damaged but also may cause fire hazard by heat.

Cooling fans are provided to cool down the projector. The fans’ running speed is changed according to the temperature inside the projector.

CAUTION IN CARRYING OR TRANSPORTING

THE PROJECTOR

– Do not drop or bump the projector, otherwise damages

or malfunctions may result.

– When

carrying the projector, use a suitable carrying case.

– Do not transport the projector by courier or any other

transport service in an unsuitable transport case. This may cause damage to the projector. For information about transporting the projector by courier or any other transport service, consult your dealer.

– Do not put the projector in a case before the projector is

cooled enough.

Moving the Projector

When moving the projector, replace the lens cap and retract adjustable feet to prevent damage to the lens and cabinet. When the projector is not in use for an extended period, put it into a suitable case with the lens side up.

Air Circulation

Air Intake Vent

Air intake Vent

Exhaust Vent (Hot air exhaust)

Air Intake Vent

Do not tilt the projector more t han 20 degrees from side to side.

Do not point the projector up to project an image.

Do not point the projector down to project an image.

Do not put the projector on either side to project an image.

Install the projector properly. Improper Installation may reduce the lamp life and cause a fire hazard.

Installing the Projector in Proper Position

Exhaust Vent (Hot air exhaust)

Compliance

Federal Communications Commission Notice

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules. Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Model Number : PLC-XU88 Trade Name : Sanyo Responsible party : SANYO FISHER COMPANY Address

: 21605 Plummer Street, Chatsworth, California 91311

Telephone No. : (818)998-7322

The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.

AC Power Cord for the United States and Canada:

AC Power Cord used in the Uni ted States and Canada is l isted by the Underwriters Laboratories (UL) and certified by the Canadian Standard Association (CSA). AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure that the plug will fit into the power outlet. Do not try to defeat this safety feature. Should you be unable to insert the plug into the outlet, contact your electrician.

GROUND

AC Power Cord Requirement

AC Power Cord for the United Kingdom:

This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus

ASA

. If the fuse cover is detachable, never use the plug with the cover omitted. If a replacement fuse cover is required, ensure it is of the same colour as that visible on the pin face of the plug (i.e. red or orange). Fuse covers are available from the Parts Department indicated in your User Instructions. If the plug supplied is not suitable for your socket outlet, it should be cut off and destroyed. The end of the flexible cord should be suitably prepared and the correct plug fitted.

WARNING : A PLUG WITH BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED IN A LIVE SOCKET OUTLET.

The Wires in this mains lead are coloured in accordance with the following code: Green-and-yellow Earth

Blue . . . . . . . . . . . Neutral

Brown . . . . . . . . . Live

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows: The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked by the letter E or by the safety earth symbol or coloured green or green-and-yellow. The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

WARNING: THIS APPARATUS MUST BE EARTHED.

THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE.

Part Names and Functions

① ⑤ ⑥③②

Front

Back

⑭

⑦

⑩

⑨⑧

⑥



④

⑪ ⑬⑫

⑮ ⑯

⑰

⑱

① Infrared Remote Receiver ② Focus Ring ③ Zoom Lever ④ Projection Lens ⑤ Lens Cap

(See page 59 for attaching.)

⑥ Air Intake Vent ⑦ Exhaust Vents

CAUTION

Hot air is exhausted from the exhaust vent. Do not put heat-sensitive objects near this side.

⑧ USB Terminal ⑨ Power Cord Connector ⑩ Speaker ⑪ Terminals and Connectors ⑫ Top Controls and Indicators ⑬ LAN Connection Terminal ⑭ SD CARD Terminal ⑮ Lamp Cover ⑯ Air Intake Vents (back and bottom) ⑰ Air Filters ⑱ Adjustable Feet



Note:

⑬

LAN Connection T

erminal and ⑭ SD CARD Terminal are for the Ne tw or k function. Refer to the owner ’s manual “Network Set-up and Operation” .

 Kensington Security Slot

This slot is for a Kensington lock used to deter theft of the projector

*Kensington is a registered trademark of ACCO Brands Corporation.

CAUTION

Do not turn on a projector with lens cap attached. High temperature from light beam may damage lens cap and result in fire hazard.

Bottom

Part Names and Functions

Rear Terminal

⑤ S-VIDEO IN

Connect the S-VIDEO output signal from video

equipment to this jack (p.19).

⑥ AUDIO IN

Connect the audio output signal from video

equipment connected to ⑤ or ⑫ to this jack. For a

mono audio signal (a single audio jack), connect it to the L (MONO) jack (p.19).

⑪ COMPUTER/COMPONENT AUDIO IN

Connect the audio output (stereo) signal from a

computer or video equipment connected to

③ or

④ to this jack (pp.18, 20).

⑫ VIDEO IN

Connect the composite video output signal to

this jack (p.19).

④

COMPUTER IN 2/COMPONENT IN/ MONITOR

OUT

This terminal is switchable and can be used for input from a computer or output the incoming RGB analog signal from COMPUTER IN1 terminal to the other monitor.

Set the terminal up as either Computer input or

Monito r output properly. (Used for Monitor out, this terminal outputs only incoming signal from COMPUTER IN 1 terminal.) (pp18,20)

⑦ AUDIO OUT (VARIABLE)

Connect an external audio amplifier to this jack

(pp.18–20). This terminal outputs sound from AUDIO IN terminal (⑥ or ⑪).

② SERVICE PORT

This jack is used to service the projector.

③ COMPUTER IN 1/DVI-I

Connect computer output (Digital/Analog DVI-I

type) to this terminal (p.18).

⑧ LAN Connection Terminal

Connect the LAN cable (refer to the owner ’s

manual “Network Set-up and Operation”).

① USB In order to operate the computer with the remote

con trol a nd use the PA GE

▲▼ butt ons on the

remote control during a presentation, connect the USB port of the computer to the USB terminal with a USB cable (not supplied) (pp.12, 18).

⑨ SD Card Slot

Insert the SD card memory (not supplied) for Memory viewer operation(refer to the owner's

manual of Memory viewer).

② ③① ⑤ ⑥④ ⑦ ⑧

⑨⑩⑪⑫

⑩ SD Card Indicator

Display the status of SD card. When inserting

SD Ca r d , t h e indicator li g h t s , and wh e n unplugging SD Card, the indicator turns off.

Top Control

⑤ LAMP REPLACE indicator

Lights yellow when the projection lamp reaches its

end of life (pp.60, 68).

⑩ WARNING TEMP. indicator

– Lights red when the projector detects an abnormal

condition.

–

Blinks red when the internal temperature of the projector exceeds the operating range (pp.57, 68).

⑨ ON/STAND–BY button

Turn the projector on or off (pp.21–22).

④ POWER indicator

– Lights red when the projector is in stand-by mode. – Lights green during operations. – Blinks green in the Power management mode

(p.51).

⑧ INPUT button

Select an input source (pp.29–30, 39–40).

⑦ MENU button

Open or close the On-Screen Menu (p.23).

② POINT ▲▼◄► (VOLUME +/–) buttons

– Select an item or adjust the value in the On-Screen

Menu (p.23).

–

Pan the image in the Digital zoom + mode (p.38).

– Adjust the volume level (Point ◄► buttons) (p.26).

③ AUTO SETUP/CANCEL button

–Correct vertical keystone distortion and adjust

computer display parameters such as Fine sync., Total dots, and Picture position (pp.25, 46).

–Display the image in SD card or return to the

menu bar in Memory Viewer menu.

Refer to the owner's manual of "Network Set-up

and Operation" and owner's manual of Memory viewer.

① SELECT button

– Execute the selected item (p.23). – Expand or compress the image in the Digital zoom

mode (p.38).

①

②

③

④

⑤

⑥

⑦

⑧

⑨

⑩

⑥ WIRELESS indicator

Turn green when the projector is in the network

mode.

Part Names and Functions

㉕ NETWORK button

Select the Network input. See owner's manual “Network Set-up and Operation” and

owner's manual of Memory viewer.

Note:

To ensure safe operation, please observe the following precautions: –

Do not bend, drop, or expose the remote

control to moisture or heat.

–

For cleaning, use a so ft dry cloth. Do

not apply benzene, thinner, splay, or any chemical material.

Remote Control

①

⑦

⑭

⑩

⑲

④

⑳

⑰

②

⑧

⑨

⑬

㉒

⑯

⑤

⑥

⑪ ⑫

⑱

㉑

⑮

③

㉓

㉔

㉕

② POWER ON/STAND-BY button

Turn the projector on or off. (pp.21-22)

⑤ VIDEO button

Select the VIDEO input source. (p.39)

⑥ COMPUTER button

Select the COMPUTER input source. (pp.29-30,40)

⑬ PAGE ▲▼ buttons

Scroll back and forth the pages on the screen when giving a presentation. To use these buttons, connect the projector and your computer with a USB cable. (pp.10,

18)

⑦ AUTO PC button

Automatically adjust the computer image to its optimum setting. (pp.27,32,46)

⑮ D.ZOOM ▲▼ buttons

Zoom in and out the images. (pp.27, 38)

⑩ MENU button

Open or close the On-Screen Menu. (p.23)

⑯ RESET/ON/ALL-OFF switch

When using the remote control, set this switch to “ON.” Set it to “ALL OFF” for

power saving when it is not used. Slide this switch to "RESET" to initialize the remote control code or switch Spotlight and Pointer to the Laser pointer function. (pp.13-14)

⑰ IMAGE button

Select the image mode. (pp.28,35,42)

⑱

MUTE button

Mute the sound. (p.26)

⑧

KEYSTONE button

Correct keystone distortion. (pp.25, 47) ⑨ Point ▲▼◄► ( VOLUME

+ / –

)

buttons – Select an item or adjust the value in the On-Screen Menu. (p.23) – Pan the image in the Digital zoom + mode. (p.38) – Adjust the volume level. (Point◄►buttons) (p.26)

⑳

NO SHOW button

Temporarily turn off the image on the screen. (p.28)

⑫ LASER button

– Operate the Laser pointer function. Laser beam is emitted while pressing this

button within 1 minute. When using this laser pointer for more than 1 minute, release the LASER button and press it again. (p.13)

– Display the Pointer on the screen. (p.13)

① L-CLICK button

Act as the left mouse button for wireless mouse operation. (p.14)

③ SIGNAL EMISSION indicator Lights red while the laser beam is being emitted from the laser light window or a

signal is being sent from the remote control to the projector.

⑪ FREEZE button

Freeze the picture on the screen. (p.27)

⑭ LAMP CONTROL button

Select a lamp mode. (pp.27, 52)

⑲

P-TIMER button

Operate the P-timer function. (p.28)

㉑ R-CLICK button

Act as the right mouse button for wireless mouse operation. (p.14) ㉒ SELECT button – Execute the selected item. (p.23) – Expand or compress the image in Digital zoom mode. (p.38)

㉓ PRESENTATION POINTER button Move a pointer of the projector or a pointer for wireless mouse operation. (pp.13-14)

㉔ AUTO SET/CANCEL button

– Correct vertical keystone distortion and adjust the PC display parameters. (pp.25, 46) – Display the image in SD card or return to the menu bar in Memory Viewer menu.

Refer to the owner's manual of "Network Set-up and Operation" and owner's manual of Memory viewer.

④ LASER LIGHT window

A laser beam is emitted from here (p.13).

Spotlight

Pointer Function

Pointer

Laser Pointer Function

LASER button

PRESENTATION POINTER button

This remote control emits a laser beam from the laser light window. Press the LASER button to activate the laser pointer. The signal emission indicator lights red and the red laser beam is emitted. If the LASER button is pressed for more than one minute or if it is released, the laser light goes off. The laser emitted is a Class II laser. Do not look into the laser light window or point the laser beam at yourself or other people. The following is the caution label for the laser beam. CAUTION: Use of controls, adjustments or performance of procedures other than those specified herein may

result in hazardous radiation exposure. Never look directly into the laser light window while a laser is emitted, otherwise eye damage may result.

The caution label is put on the remote control.

You can move the Spotlight or Pointer of the projector with the remote control to emphasize a part of the projected image.

Press and hold the MENU and NO SHOW buttons for more than 10 seconds to activate the Pointer function. (The Laser pointer has switched to the Pointer function.)

Press the LASER button on the remote control pointing to ward the proj ector. The Spotlight or Poi nter is displayed on the screen with the LASER button lighting green. Then move the Spotlight or Pointer with the PRESENTATION POINTER button. If the LASER button does not light green and continues to emit a laser beam, try the abovementioned procedure until the LASER button lights green.

To clear the Spotlight or Pointer out the screen, press the LASER button pointing toward the projector and see if the LASER button lighting is turned off. To switch to the Laser pointer again, press and hold the NO SHOW and MENU buttons for more than 10 seconds or slide the RESET/ON/ALL-OFF switch to “RESET” and then to “ON”. When you reset the Pointer function, the remote control code will be reset, as well.

Note:

• You can choose the size of Spotlight (Large/Middle/ Small) and the pattern of Pointer (Arrow/Finger/Dot) in the Setting Menu. See “Pointer” on page 52.

After the Laser pointer has switched to the Pointer, use the LASER b utton as the Pointe r function ON -OFF switch. Press t he LASER button pointing toward the projector and see if it lights green.

Laser Light Window

Signal Emission Indicator

MENU button NO SHOW button

Press and hold the MENU and NO SHOW buttons for more than 10 seconds.

PRESENTATION POINTER button

R-CLICK button

L-CLICK button

While pressing the MENU button, press th e IMAGE but ton num ber of tim es corresponding to the remote control code.

MENU button

IMAGE button

RESET/ON/ALL-OFF switch

Remote Control Code

Number of Times

Pressing IMAGE

Button

Code 1 1

Code 2 2

Code 3 3

Code 4 4

Code 5 5

Code 6 6

Code 7 7

Code 8 8

Wireless Mouse Operation

The remote control can be used as a wireless mouse for your computer.

Acts as left (click) mouse button while the projector and a computer are connected with a USB cable.

Move the pointer on the screen with this button.

Ac ts as r igh t (click) m ous e button while the projector and a computer are connected with a USB cable.

The eight different remote control codes (Code 1–Code 8) are assigned to this projector. Switching the remote control codes prevents interference from other remote controls when several projectors or video equipment next to each other are operated at the same time. Change the remote control code for the projector first before changing that for the remote control. See “Remote control” in the Setting Menu on page 52.

Press and hold the MENU and IMAGE buttons for more than five seconds to switch between the codes. The code switches sequentially for one pressing the IMAGE button. See the list below.

To initialize the remote control code, slide the RESET/ ON/ALL-OFF switch to “RESET,” and then to “ON.” The initial code is set to Code 1.

Part Names and Functions

Before operating the wireless mouse, connect your computer and the projector with a USB cable (not supplied). See “Connecting to a Computer” on page 18. When the Pointer function is used, the wireless mouse is not available.

When a USB cable is connected to the comput er and the projec tor, turn on the projector first, then the computer. If you turn on the computer first, the wireless mouse function may not operate correctly.

Adjustable Feet

To ensure safe operation, please observe the following precautions :

 ● Usetwo(2)AAAorLR03typealkalinebatteries.  ● Alwaysreplacebatteriesinsets.  ● Donotuseanewbatterywithausedbattery.  ● Avoidcontactwithwaterorliquid.  ● Donotexposetheremotecontroltomoistureorheat.  ● Donotdroptheremotecontrol.  ● Ifthebatteryhasleakedontheremotecontrol,carefullywipethecasecleanandinstallnewbatteries.  ● Riskofanexplosionifbatteryisreplacedbyanincorrecttype.  ● Disposeofusedbatteriesaccordingtotheinstructions.

Pressthelid downwardandslideit.

Openthebattery compartmentlid.

Installnewbatteries intothecompartment.

Replacethe compartmentlid.

Two AAA size batteries

Forcorrectpolarity (+and–),besure batteryterminalsare

in contact with pins in

compartment.

1 2 3

Point the remote control toward the projector (Infrared Remote Receiver) when pressing the buttons. Maximum operating range for the remote controlis about 16.4'(5 m) and60degreesinfrontoftheprojector.

Remote Control Operating Range

Remote Control Battery Installation

Projectionanglecanbeadjustedupto10.0degreeswiththe adjustablefeet.

Liftthefrontofthe projector and press the feetlocklatches onbothsideoftheprojector.

Releasethefeetlocklatches tolockthe adjustablefeetand rotatetheadjustablefeettoaproperheight,andtilt.

Keystone distortion can be adjusted automatically with the Autosetupfunction ormanuallybyusing theremotecontrol orthemenuoperation(seepages25,46-47).

16.4' (5m)

30°

Remotecontrol

30°

AdjustableFeet

FeetLockLatches

Positioning the Projector

For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the screen.

Installation

Notes:

• The brightness in the room has a great influence on picture quality. It is recommended to limit ambient lighting in order to obtain the best image.

•

All measurements are approximate and may vary from the actual sizes.

Connecting the AC Power Cord

This projector uses nominal input voltages of 100-120 V or 200–240 V AC and it automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system. If you are not sure of the type of power being supplied, consult your authorized dealer or service station. Connect the projector with all peripheral equipment before turning the projector on.

Notes:

Unplug the AC power cord when the projector is not in use. When this projector is connected to an outlet with the AC power cord, it is in Stand-by mode and consumes a little electric power.

Connect the AC power cord (supplied) to the projector.

To the AC outlet.

(200 - 240 V AC)

NOTE ON THE POWER CORD

AC power cord must meet requirement of the country where you use the projector. Confirm the AC plug type with the chart below and proper AC power cord must be used. If supplied AC power cord does not match your AC outlet, contact your sales dealer.

To power cord connector on your projector.

Projector side

AC outlet side

Ground

To the AC outlet.

(120 V AC)

For the U.S.A. and Canada

To the AC outlet.

(200 - 240 V AC)

For the U.K.For Continental Europe

CAUTION

The AC outlet must be near this equipment and must be easily accessible.

Installation

Connecting to a Computer

Cables used for connection

• VGA Cable (Mini D-sub 15 pin) *

• DVI-VGA Cable

• DVI Cable

• USB Cable

• Audio Cables (*One cable is supplied; other cables are not supplied with the projector.)

Notes:

• In put sou nd t o the COM PUT ER/CO MPO NENT AUDIO IN

te rmi nal when usi ng t he C OMPUT ER I N 1/DVI- I and the COMPUTER IN 2/ COMPONENT IN /MONITOR OUT terminal as input.

• W

hen the AUDIO OUT is plugged-in, the projector's built-in

speaker is not available.

• When the cable is of the longer variety, it is advisable to use the

CO MPUTE R IN 1 / DVI-I and not t he COM PUTER IN 2 / COMPONENT IN / MONITOR OUT.

• USB

cable connection is needed when operating the computer

with the remote control or using the PAGE ▲▼ buttons on the

remote control.

Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables.

External Audio Equipment

DVI cable

Audio cable (stereo)

Monitor Output

Monitor Input

Audio Output

COMPUTER/ COMPONENT AUDIO IN

AUDIO OUT (stereo)

Audio Input

Monitor Output

COMPUTER IN 1/ DVI-I

VGA cable

This terminal is switchable. Set up the terminal as Computer2 input or COMPONENT IN or Monitor output. (See Page 50.)

COMPUTER IN 2 /COMPONENT IN /MONITOR OUT

DVI

-VGA cable

USB cable

Connecting to Video Equipment

Cables used for connection

• Video and Audio Cable (RCA x 3)

• S-VIDEO Cable

• Audio Cable (Cables are not supplied with the projector. )

Un plug the powe r cords of both the projector and external equipment from the AC outlet before connecting cables.



Notes:

• When the AUDIO OUT is plugged-in, the projector's builtin speaker is not available.

•

The S-VIDEO jack connection overrides the VIDEO

jack connection when selecting AUTO in the Input Menu (p.39).

External Audio Equipment

Audio cable (stereo)

VIDEO

S-VIDEO

S-Video cable Video and audio cable

Composite Video and Audio Output

S-Video Output

AUDIO IN

Audio Input

AUDIO OUT (stereo)

(R)

(L)

(Video)

Installation

Connecting to Component Video Equipment

Cables used for connection

• Audio Cables

• Scart-VGA Cable

• Component Cable

• Component-VGA Cable (Cabels are not supplied with this projector.)

Notes:

• When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available.

•

See page 72 for ordering optional cables.

• RGB Sca rt signal cannot b e out put from the MONITOR OUT terminal.

Unplug the pow er cords o f both the projector and external equipment from the AC outlet before connecting cables.

External Audio Equipment

COMPUTER/ COMPONENT

AUDIO IN

Audio cable (stereo)

Audio Input

Component Video Output

(Y, Pb/Cb, Pr/Cr)

RGB Scart 21-

pin Output

Audio Output

Scart-VGA cable

ComponentVGA cable

AUDIO OUT (stereo)

Component cable

COMPUTER IN 2/ COMPONENT IN / MONITOR OUT

This termi nal is switchable. Set up the terminal as Computer2 input or COMPONENT IN or Monitor output. (See Page 50.)

The preparation display will disappear after 30 seconds.

(See page 52 for Lamp control status.)

Lamp control status

Turning On the Projector

Connect the projector ’s AC power cord into an AC outlet. The POWER indicator lights red. Open the lens cap (see pages 9,59).

Press the POWER ON/SYAND-BY button on the top control or on the remote control. The POWER indicator lights green and the cooling fans start to operate. The preparation display appears on the screen and the count down starts.

After the countdown, the input source that was selected the last time and the lamp control status icon (see page

52) appear on the screen.

If the projector is locked with a PIN code, PIN code input dialog box will appear. Enter the PIN code as instructed below.

Complete peripheral connections (with a computer, VCR, etc.) before turning on the projector.

What is PIN code?

PIN (Personal Identification Number) code is a security code that allows the person who knows it to operate the projector. Setting a PIN code prevents unauthorized use of the projector.

A PIN code consists of a four-digit number. Refer to the PIN code lock function in the Setting Menu on pages 53–54 for locking operation of the projector with your PIN code.

Enter a PIN code

Use the Point ▲▼ buttons to enter a number. Press the Point

► button to fix the number and move the red frame pointer

to the next box. The number changes to “.” If you fixed an incorrect number, use the Point ◄ button to move the pointer to the number you want to correct, and then enter the correct number.

Repeat this step to complete entering a four-digit number.

After entering the four-digit number, move the pointer to “Set.” Press the SELECT button so that you can start to operate the projector.

If you entered an incorrect PIN code, “PIN code” and the number () will turn red for a moment. Enter the correct PIN code all over again.

CAUTION ON HANDLING PIN CODE

If you forget your PIN code, the projector can no longer be started. Take a special care in setting a new PIN code; write down the number in a column on page 75 of this manual and keep it at hand. Should the PIN code be missing or forgotten, consult your dealer or service center.

Selected Input Source and Lamp Control

After the OK icon disappears, you can operate the projector.

PIN Code Input Dialog Box

Notes:

• When the Logo select function is set to “Off,” the logo will not be shown on the screen (p.49).

•

When the “Countdown off” or “Off” is selected

in the Display function, the countdown will not be shown on the screen (p.47).

• During the countdown period, all operations are invalid.

• If the correct PIN code number is not entered within three minutes after the PIN code dialog box appeared, the projector will be turned off automatically.

•

The “1234” is set as the initial PIN code at

the factory.

• When the Input Search function is set to “On2”, the input signal will be searched automatically (p.50)

Note:

• The Filter warning and Lamp replacement icons may appear on the screen

depending on the usage state of the

projector.

Basic Operation

TO MAINTAIN THE LIFE OF THE LAMP, ONCE YOU TURN THE PROJECTOR ON, WAIT AT LEAST FIVE MINUTES BEFORE TURNING IT OFF.

“Power off?” disappears after 4 seconds.

Turning Off the Projector

Press the POWER ON/STAND-BY button on the top control or on the remote control, and “Power off?” appears on the screen.

Press the POWER ON/STAND-BY button again to turn off the projector. The POWER indicator starts to blink red, and the cooling fans keep running. (You can select the level of fans’ quietness and speed. See “Fan” on page 55.) At this time, you can unplug the AC power cord even if the fans are still running.

When the projector has cooled down enough, the POWER indicator stops blinking and you can turn on the projector.

Notes:

•

When the On start function is set to “On,” the projector

will be turned on automatically by connecting the AC power cord to an AC outlet (p.52).

•

The running speed of cooling fans is changed according

to the temperature inside the projector.

• Do not put the projector in a case before the projector is cooled enough.

• If the WARNING TEMP. indicator blinks or lights red, see “WARNING TEMP. indicator” on page 57.

•

While the POWER indicator is blinking, the lamp is being

cooled down and the projector cannot be turned on. Wait until the POWER indicator stops blinking to turn on the projector again.

• The fan rotation will terminate directly if the AC power cord is unplugged immediately after the projector is turned off.

• The projector can be turned on after the POWER indicator turns red. The waiting time to restart will be shortened when the normal power-off processing for fan

cooling is completed, compared with the time the AC

power cord is immediately unplugged after the poweroff.

Basic Operation

DO NOT OPERATE THE PROJECTOR CO N T I N UOU S LY WITH O U T R E ST. CO NTI NUOUS USE MAY RESULT IN SHORTENING THE LAMP LIFE. TURN OFF THE PROJECTOR AND LET STAND FOR ABOUT AN HOUR IN EVERY 24 HOURS.

How to Operate the On-Screen Menu

The projector can be adjusted or set via the On-Screen Menu. For each adjustment and setting procedure, refer to the respective sections in this manual.

Use the Point◄► buttons to select a Menu icon. Use the Point ▲▼ buttons to select an item in the selected menu.

Press the SELECT button to show the item data. Use the Point ◄► buttons to adjust the values.

To close the On-Screen Menu, press the MENU button again.

Press the MENU button on the top control or the remote control to display the On-Screen Menu.

Note:

• The selected item is not active until the SELECT button is pressed.

On-Screen Menu

Top Control

MENU button

POINT buttons

Remote Control

SELECT button

MENU button

SELECT button

POINT buttons

Menu bar Pointer

(red frame)

Menu icon

Item data

Press the Point

◄►buttons to adjust

the value.

SELECT

button

Pointer (red frame)

Press the Point

▲▼ buttons

to move the pointer.

Item

Quit

Exit this menu.

Menu Bar

PC System Menu

Image Adjust Menu

Used to adjust computer image [Contrast/Brightness/ Color temp./White balance (R/G/B)/ Sharpness/Gamma] (pp.36–37).

Setting Menu

Used to adjust the volume or mute the sound (p.26).

Image Select Menu

Used to select an image mode among Dynamic, Standard, Real, Blackboard(Green), and Image 1– 4 (p.35).

For computer source

AV System Menu

Used to select system of selected video source (p.41).

Image Adjust Menu

Use d t o a dju st pict ure i m age [C ontrast/B rightne ss /Color/ Tint/ Color temp./White balance (R/G/ B)/Shar p n e s s / G a mma/ N o i s e reduction/Progressive] (pp.43– 44).

For video source

Same function as computer menu.

Input Menu

Used to select an input source either Video or Computer (pp.39, 40).

PC Adjust Menu

Used to adjust parameters to match with input signal format (pp.32–34).

Image Select Menu

Used to select an image mode among Dynamic, Standard, Cinema, Blackboard(Green) and Image 1–4 (p.42).

Screen Menu

Used to set size of image[Normal/Wide/ Custom](p.45).

Guide Window

Sh ow th e sel ected Menu of t h e O n Screen Menu.

Same function as menu for computer source.

Input Menu

Used to select an input source either Computer or Video. (pp.29-30).

Screen Menu

Used to adjust size of the image [Normal/ True/Wide/Full/Custom/ Digital zoom +/–] (pp.37–38).

For detailed functions of each menu, see “Menu Tree” on pages 66-67.

Sound Menu

See owner’s manual “Network Set-up and Operation”.

Wired Menu

Basic Operation

Used to set the projector’s operating configurations (pp.46-56).

See owner’s manual “Network Set-up and Operation”.

Wireless Menu

Used to se l e c t computer system (p.31).

Rotate the Zoom Lever to zoom in and out. Rotate the Focus Ring to adjust the focus of the image.

Zoom and Focus Adjustment

If a projected picture still has keystone distortion after pressing the AUTO SETUP/CANCEL button on the top control or the AUTO SET/CANCEL button on the remote control, correct the image manually as follows:

Press the KEYSTONE button on the remote control. The Keystone dialog box appears. Use the Point ▲▼ buttons to correct keystone distortion. The keystone adjustment can be stored (see page 47).

Reduce the upper width with the Point

▲ button.

Reduce the lower width with the Point

▼ button.

• The white arrows indicate that there is no correction.

•

A red arrow indicates the direction of correction.

• An arrow disappears at the maximum correction.

• If you press the KEYSTONE button on the remote control once more while the keystone dialog box is being displayed, the keystone adjustment will be canceled.

•

The adjustable range is limited depending on the

input signal.

Keystone Correction

Remote Control

Auto setup function is provided to automatically correct Keystone distortion according to the projector’s tilt and adjust the computer display parameters (Fine sync, Total dots, and Picture position) by just pressing the AUTO SETUP/CANCEL button on the top control or the AUTO SET/CANCEL button on the remote control. The operational setup for the Auto setup can be changed in the Setting menu. Refer to page 46 for the setting of the Auto setup function.

Notes:

• Auto Keystone corrects vertical distortion only; it does not correct horizontal distortion.

•

Auto Keystone cannot work when Ceiling feature is set to

“On” in the Setting menu (p.50).

• Perfect correction of the image distortion cannot be ensured with the Auto setup function. If the distortion cannot be corrected properly by pressing the AUTO SETUP/CANCEL or AUTO SET/CANCEL button, adjust manually by pressing the KEYSTONE button on the remote control or selecting Keystone in the Setting menu (p.47).

• Fine sync, Total dots, Horizontal and Vertical position of some computers cannot be fully adjusted with the Auto PC Adjustment function. When the image is not provided properly with this operation, manual adjustments are required (pp.33–34).

AUTO SET/CANCEL button

Auto Setup Function

POINT ▲▼ buttons

KEYSTONE button

Zoom Lever

Focus Ring

Top Control

AUTO SETUP/CANCEL button

POINT ▲▼buttons

Sound Adjustment

Press the MENU button to display the On-Screen Menu. Use the Point ◄► buttons to move the red frame pointer to the Sound Menu icon.

Press the VOLUME+/– buttons on the top control or on the remote control to adjust the volume. The volume dialog box appears on the screen for a few seconds.

Press the MUTE button on the remote control to temporarily turn off the sound. To turn the sound back on, press the MUTE button again or press the VOLUME +/– buttons. The Mute function is also effective for the AUDIO OUT jack.

Press the Point ◄► buttons to switch the mute function On/ Off. When the sound is turned off, “On” is displayed. Press the Point◄► buttons again to turn the sound back on.

Use the Point ▲▼ buttons to move the red frame pointer to the desired item, and then press the SELECT button.

Volume

Mute

Press the Point ► button to turn up the volume; press the Point ◄ button to turn down the volume.

Mute

Direct Operation

Menu Operation

Approximate level of the volume.

Exit the Sound Menu.

Approximate level of the volume.

Press the MUTE button to set the Mute function On or Off. The dialog box disappears after 4 seconds.

Sound Menu

Sound Menu icon

Volume Dialog Box

Remote Control

VOL+ button

VOL- button

MUTE button

Top Control

Basic Operation

VO LUME+ /buttons

Basic Operation

Remote Control Operation

Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu.

Press the COMPUTER, VIDEO, or NETWORK button on the remote control to select the input source. See pages 2930, 39-40 for details. Refer to the owner’s manual “Network Set-up and Operation” for details about the network input.

COMPUTER/VIDEO/NETWORK button

Press the FREEZE button on the remote control to freeze the picture on the screen. To cancel the Freeze function, press the FREEZE button again or press any other button.

FREEZE button

Press the AUTO PC button on the remote control to operate the Auto PC Adj. function. The computer screen adjustment can be done easily by pressing this button. See page 32 for details.

AUTO PC button

Press the D.ZOOM buttons on the remote control to enter to the Digital zoom +/– mode. See page 38 for details.

D.ZOOM buttons

Remote Control

FREEZE button

D.ZOOM buttons

AUTO PC button

POINT ▲▼buttons

LAMP CONTROL button

IMAGE button

NO SHOW button

P-TIMER button

Note:

• See the next page for the description of other

buttons.

LAMP CONTROL button

Press the LAMP CONTROL button on the remote control to select the lamp mode for changing the brightness on the screen.

Normal ....... Normal brightness

Auto ........... The brightness according to the input signal

(between High and Eco mode).

Eco ............ Lower brightness reduces the lamp power

consumption and extends the lamp life.

COMPUTER button

NETWORK button

VIDEO button

Basic Operation

black out → the captured image → normal →

• • • • •

Press the NO SHOW button on the remote control to black out the image. To restore to normal, press the NO SHOW button again or press any other button. When a projected image is captured and set as “User” in the Logo selection (see page 48), the screen changes each time you press the NO SHOW button as follows.

NO SHOW button

Press the P-TIMER button on the remote control. The P-Timer display “00:00” appears on the screen and the countdown starts (00:00–59:59). To stop the countdown, press the P-TIMER button. To cancel the P-Timer function, press the P-TIMER button again.

P-TIMER button

Press the IMAGE button on the remote control to select a desired image mode of the screen. See pages 35, 42 for details.

IMAGE button

“No show” disappears after 4 seconds.

P-Timer display

Note:

• See the previous page for the description of

other buttons.

IMAGE button

NO SHOW button

P-TIMER button

Choose either Computer 1 (Analog) or Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control. Before using these buttons, correct input source should be selected through Menu operation as described below.

Press the MENU button to display the On-Screen Menu. Use the Point ◄► buttons to move the red frame pointer to the Input Menu icon.

Input Menu

Use the Point ▲▼ buttons to move the red arrow pointer to either Computer 1 (Analog) or Computer 2, and then press the SELECT button.

When selecting Computer 1 (Analog), RGB input source will be selected directly. When selecting Computer 2, the Source Select Menu appears. Move the pointer to RGB and then press the SELECT button.

Computer 1 (Analog)

Video

Computer 2

Input Source Selection (RGB: Computer 1 (Analog)/Computer 2 )

Computer Input

Move the pointer (red arrow) to Computer 1 (Analog) and press the SELECT button.

Input Menu icon

COMPUTER button

Notes:

• Wired and Wireless are for the Network function. See owner’s manual “Network Set-up and Operation” .

• When the Input Search function is set to “On1” or “On2”, the input signal will be searched automatically (p.50).

• Computer 2 is not displayed when the COMPUTER IN 2/ MONITOR OUT terminal is set as Monitor out. (p.50)

• Computer 2 (COMPUTER IN 2/MONITOR OUT) can accept only RGB signal.

Move the pointer (red arrow) to RGB.

Move the pointer (red arrow) to Computer 2 and press the SELECT button.

Input Menu icon

Computer

Wired

Top Control

INPUT button

Computer 1 (Digital)

Remote Control

Computer 1 (Analog)

Computer 2

Computer 1 (Digital)

Direct Operation

Menu Operation

Input Menu

Wireless

Computer Input

Choose Computer 1(Digital) by pressing the INPUT button on the top control or press the COMPUTER button on the remote control. Before using these buttons, correct input source should be selected through Menu operation as described below.

Press the MENU button to display the On-Screen Menu. Use the Point ◄► buttons to move the red frame pointer to the Input Menu icon.

Input Menu

Use the Point ▲▼ buttons to move the red arrow pointer to Computer 1 (Digital), and then press the SELECT button.

After the Source Select Menu appeared for Computer 1 (Digital), move the pointer to RGB (PC digital) or RGB (AV HDCP), and then press the SELECT button.

Input Source Selection (RGB(PC digital), RGB(AV HDCP))

Mo ve t he p ointe r ( r e d a rr o w ) t o Computer 1 (Digital) a n d p re s s t h e SELECT button.

Input Menu icon

Move the pointer to the source that you want to select and press the SELECT button.

Computer

Computer 1 (Analog)

Video

Computer 2

COMPUTER button

Wired

Top Control

INPUT button

Computer 1 (Digital)

Remote Control

Computer 1 (Analog)

Computer 2

Computer 1 (Digital)

Direct Operation

Menu Operation

Notes:

• HDCP (High-bandwidth Digital Content Protection) is

a system for protecting digital entertainment content delivered by DVI (Digital Visual Interface) from being copied. The specification of HDCP is decided and controlled by Digital Content Protection, LLC. Should the specification be changed, this projector may not display the digital content protected by HDCP.

• Wired and Wireless are for the Network function. See owner’s manual “Network Set-up and Operation” .

• When the Input Search function is set to “On1” or “On2”, the input signal will be searched automatically (p.50).

• When Monitor out is selected in the Terminal function (p.50), Computer 2 is not displayed.

Wireless

The Auto PC Adjustment function operates to adjust the projector.

PC System Menu

The PC System Menu icon Selected system is displayed.

Systems in this dialog box can be selected.

PC System Menu

Customized Mode (1–5) set in the PC Adjust Menu (pp.33–34).

Computer System Selection

This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, WXGA, or UXGA with its Multi-scan system and Auto PC Adjustment. If a computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional settings. (Signal formats provided in this projector are shown on pages 69-70.)

One of the following messages may appear when:

The projector cannot recognize the connected signal conforming to the provided PC Systems. The “Auto” is displayed on the System Menu box and the Auto PC Adjustment function works to display proper images. If the image is not projected properly, a manual adjustment is required (pp.33-34).

There is no signal input from the computer. Check the connection between your computer and the projector. (See “Troubleshooting” on page 63.)

Auto

-----

The preset system is manually adjusted in the PC Adjust Menu. The adjusted data can be stored in Mode 1–5 (pp.33-34).

Mode 1

PC Systems provided in this projector is chosen. The projector chooses a proper system provided in the projector and displays it.

SVGA 1

*Mode 1 and SVGA 1 are examples.

Press the MENU button to display the On-Screen Menu. Use the Point ◄► buttons to move the red frame pointer to the PC System Menu icon.

Use the Point ▲▼ buttons to move the red arrow pointer to the desired system and then press the SELECT button.

PC system can also be selected manually.

Selecting Computer System Manually

Computer Input

Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical positions to conform to your computer.

Move the red frame pointer to Auto PC Adj. and press the SELECT button.

“Please wait...” appears while the Auto PC adjustment is in process.

PC Adjust Menu

PC Adjust Menu icon

Auto PC Adjustment

Remote Control

AUTO PC button

The Auto PC adjustment function can be operated directly by pressing the AUTO PC button on the remote control.

Direct Operation

To store adjustment parameters

The adjusted parameters from the Auto PC Adjustment can be stored in the projector. Once the parameters are stored, the setting can be done just by selecting a Mode (1–5) in the PC System Menu (see page 31). See also “Store” on page

34.

Notes:

•

Fine sync, Total dots, Horizontal and Vertical position of

some computers cannot be fully adjusted with the Auto PC Adjustment function. When the image is not provided properly with this operation, manual adjustments are required (pp.33–34).

•

The Auto PC Adjustment cannot be operated when 480i,

575i, 480p, 575p, 720p,1035i, or 1080i is selected in the PC System Menu (p.31), or when the signal is coming from the DVI-terminal.

Press the MENU button to display the On-Screen Menu. Use the Point ◄► buttons to move the red frame pointer to the PC Adjust Menu icon.

Use the Point ▲▼ buttons to move the red frame pointer to Auto PC Adj. and then press the SELECT button twice.

Auto PC Adj.

Menu Operation

PC Adjust Menu

Manual PC Adjustment

Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector. Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has five independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific computer.

Press the MENU button to display the On-Screen Menu. Use the Point ◄► buttons to move the red frame pointer to the PC Adjust Menu icon.

Use the Point ▲▼ buttons to move the red frame pointer to the desired item and then press the SELECT button to display the adjustment dialog box. Use the Point ◄► buttons to adjust the setting value.

Move the red frame pointer to the desired item and press the SELECT button.

PC Adjust Menu icon

Press the SELECT button here to adjust other items.

Use the Point

◄► buttons

to adjust the value.

Status (Stored/Free) of the selected Mode.

Selected Mode

Press the SELECT button at Current mode to show the information of the connected computer.

Use the Point ◄► buttons to adjust the value, eliminating a flicker from the image displayed (from 0 to 31).

Fine sync

Use the Point ◄► buttons to adjust the number of total dots in one horizontal period to match your PC image.

Total dots

Use the Point ◄► buttons to adjust the horizontal picture position.

Horizontal

Use the Point ◄► buttons to adjust the vertical picture position.

Vertical

Press the SELECT button to show H-sync freq. and V-sync freq. of the connected computer.

Current mode

Use the Point ◄► buttons to adjust the clamp level. When the image has dark bars, try this adjustment.

Clamp

Computer Input

Vacant

Values of “Tota l dots”, “Horizontal”, “Vertical”, “Display area H”, and “Display area V”.

Close this dialog box.

To store adjusted data

To clear adjusted data

This Mode has stored parameters.

Move the red frame pointer to th e desired ite m and press the SELECT button.

Use the Point ◄► buttons to adjust the horizontal area displayed by this projector.

Display area H

Use the Point ◄► buttons to adjust the vertical area displayed by this projector.

Display area V

Reset

Store

Exit the PC Adjust Menu.

Quit

To store the adjusted data, select Store and then press the SELECT button. Move the red arrow pointer to one of the Modes 1 to 5 in which you want to store, and then press the SELECT button.

To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select [Yes]. All adjustments will return to their previous figures.

Mode free

To clear the stored data, select Mode free and then press the SELECT button. Move the red arrow pointer to the Mode that you want to clear and then press the SELECT button.

Notes:

•

Display area (H/V) cannot be selected when 480i, 575i,

480p, 575p, 720p, 1035i, or 1080i is selected in the PC System Menu (p.31).

•

PC Adjust Menu cannot be selected when Computer

1(Digital) is selected in the Input Menu (p.30).

Move the red frame pointer to the desired image mode and press the SELECT button.

The selected image mode is check marked.

Image Select Menu

Normal picture mode preset on the projector.

Standard

Picture mode with improved halftone for graphics.

Real

For the image projected on a blackboard. See above for further description.

Blackboard(Green)

Image Select Menu icon

IMAGE button

Dynamic

Real

Image 1

Image 2

Image 3

Image Mode Selection

Image 4

For viewing with the user preset image mode in the Image Adjust Menu (see pages 36-37).

Image 1~4

Blackboard

(Green)

For viewing pictures in a bright room.

Dynamic

Standard

Remote Control

IMAGE button

Select the desired image mode from among Dynamic, Standard, Real, Blackboard (Green), Image 1, Image 2, Image 3, and Image 4 by pressing the IMAGE button on the remote control.

Standard

Picture mode with improved halftone for graphics.

Real

Blackboard (Green)

Image 1–

For the image projected on a blackboard. Th is mod e help enhan ce the image projected on a blackboard. This is mainly effective on a green colored board, not truly effective on a black colored board.

Dynamic

Direct Operation

For viewing pictures in a bright room.

Normal picture mode preset on the projector.

For viewing with the user preset image mode in the Image Adjust Menu (see pages 36-37). This Image memory is provided in each computer, component, and video input source.

Press the MENU button to display the On-Screen Menu. Use the Point ◄► buttons to move the red frame pointer to the Image Select Menu icon.

Use the Point ▲▼ buttons to move the red frame pointer to the desired image mode and then press the SELECT button.

Menu Operation

Computer Input

Use the Point ◄► buttons to adjust the setting value.

Move the red frame pointer to the desired item and the n press the SELECT button.

Image Adjust Menu

Image Adjust Menu icon

Selected Image mode

Image Adjustment

Reset

Press the MENU button to display the On-Screen Menu. Use the Point ◄► buttons to move the red frame pointer to the Image Adjust Menu icon.

Note:

•

When the White balance Red, Green, or

Blue is adjusted, the Color temp. level will change to “Adj.”.

Press the Point ◄ button to decrease the contrast; press the Point ► button to increase the contrast (from 0 to 63).

Press the Point ◄ button to decrease the brightness; press the Point ► button to increase the brightness (from 0 to 63).

Contrast

Brightness

Press the Point ◄ button to lighten red tone; press the Point

► button to deepen red tone (from 0 to 63).

White balance (Red)

Press the Point ◄ button to lighten green tone; press the Point ► button to deepen green tone (from 0 to 63).

White balance (Green)

Press the Point ◄ button to lighten blue tone; press the Point ► button to deepen blue tone (from 0 to 63).

White balance (Blue)

Use the Point ◄► buttons to select the desired Color temp. level (High, Mid, Low, or XLow).

Color temp.

Use the Point ◄► buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15).

Gamma

Press the Point ◄ button to decrease the sharpness of the image; press the Point ► button to increase the sharpness of the image (from 0 to 15).

Sharpness

To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select [Yes]. All adjustments will return to their previous figures.

Store

Exit the Image Adjust Menu.

Quit

Store icon

This projector has the picture screen resize function, which enables you to customize the image size.

Screen Menu

Screen Size Adjustment

Provide the image to fit the screen size.

Normal

True

Provide the image in its original size. When the original image size is larger than the screen size (1024 x 768), the projector enters to the panning mode automatically. Use the Point ▲▼◄►buttons to pan the image. When adjusted, the arrows will turn red. When reached to the correction limits, the arrows will disappear.

Full

Provide the full screen image.

Notes:

•

The Screen Menu, except for "Normal"

and "Custom", cannot be operated when 720p(HDTV), 1035i (HDTV), or 1080i (HDTV) is selected in the PC System Menu (p.31).

•

This p r ojec t or c annot displ ay a n y

resolution higher than 1600 x 1200. If your computer’s screen resolution is higher than it, reset the resolution to the lower before connecting to the projector.

• The image data in other than 1024 x 768 is modified to fit the screen size in initial mode.

• True, Full, and Digital zoom +/– cannot be selected when 480i, 575i, 480p, or 575p is selected in the PC System Menu (p.31).

Press the MENU button to display the On-Screen Menu. Use the Point ◄► buttons to move the red frame pointer to the Screen Menu icon.

Use the Point ▲▼ buttons to move the red frame pointer to the desired function and then press the SELECT button.

To store the adjusted data, select Store and press the SELECT button. Use the Point ▲▼ buttons to select one from Image 1 to 4 and press the SELECT button. A confirmation box appears and then select [Yes]. Stored data can be called up by selecting an “Image (1–4)” in the Image Mode Selection on page 35.

Image Mode Menu Move the red frame pointer to an image item to be set and t h en p r es s t he SELECT button.

A confirmation box appears and then select [Yes]

Wide

Provide the image to fit the wide video aspect ratio (16:9) by expanding the image width uniformly. This function can be used for providing a squeezed video signal at 16:9.

Move the red frame pointer to the function and press the SELECT button.

Screen Menu icon

Computer Input

Select Digital zoom +. The On-Screen Menu disappears and “D. zoom +” appears. Press the SELECT button to expand the image size. Use the Point ▲▼◄► buttons to pan the image. The Panning function can work only when the image is larger than the screen size. A projected image can be also expanded by pressing the D.ZOOM ▲ button on the remote control.

To exit the Digital zoom +/– mode, press any button except the D.ZOOM

▲▼ buttons, SELECT, and Point buttons.

Digital zoom +

Select Digital zoom –. The On-Screen Menu disappears and “D. zoom –” appears. Press the SELECT button to compress image size. The projected image can be also compressed by pressing the D.ZOOM ▼ button on the remote control.

Digital zoom –

To return to the previous screen size, select a screen size from the Screen Size Adjustment Menu or select an input source from the Input Source Selection Menu (see pages 29-30) again, or adjust the screen size with the D.ZOOM

▲▼ buttons.

For zooming in and out the images

Notes:

• The panning function may not operate properly if the stored Mode in the PC Adjust Menu is used (p.34).

• The minimum compression ratio is limited depending on the input signal, when the Keystone function is working or when the custom is selected for the screen size.

•

True, Full, and Digital zoom +/– cannot

be selected when 480i, 575i, 480p, or 575p is selected in the PC System Menu (p.31).

• Digital zoom +/- cannot be selected when Full or True is selected.

Remote Control

D.ZOOM + button

POINT buttons

SELECT button

D.ZOOM - button

Adjust the screen scale and position manually with this function. Press the SELECT button at Custom and the “Custom” is displayed on the screen for a few seconds and then the Aspect dialog box appears.

Scale H/V .......... Adjust the Horizontal/Vertical screen

scale.

H&V ................... W

hen set to “On,” the aspect ratio is fixed. The “Scale V” appears dimmed and becomes unavailable. Adjust “Scale H,” then the screen scale is automatically modified based on the aspect ratio.

Position H/V ....... Adjust the Horizontal/Vertical screen

position.

Common ............ Save the adjusted scale to all the inputs.

Press the SELECT button at Common to display a confirmation box. To save the scale, press the SELECT button at “Yes.” When Custom is selected, the saved scale is used.

Reset ................. Reset the all adjusted values. Press

the SELECT button at Reset to display a confirmation box. To reset, press the SELECT button at “Yes.”

Custom

Notes:

• Wh en no sign al is dete ct ed, “No rma l” i s set

a u t o m a t i c a l l y and t h e A s p e c t dialog b o x

disappears.

• The adjustable range for Scale H/V and Position

H/V is limited depending on the input signal.

Pre s s th e SE LECT b utt o n at Common or Reset, to display a confirmation box.

Choose Video by pressing the INPUT button on the top control or the VIDEO button on the remote control. Before using these buttons, correct input source should be selected through menu operation as described below.

Use the Point▲▼ buttons to move the red arrow pointer to Video and then press the SELECT button to display the Source Select Menu.

Move the pointer to Video and press the SELECT button.

VIDEO

Move the pointer to the source that you want to select and press the SELECT button.

Source Select Menu (VIDEO)

Input Menu

Move the pointer to the desired source and then press the SELECT button.

Input Source Selection (Video, S-video)

Input Menu icon

Video Input

Computer 1 (Analog)

Video

Computer 2

INPUT button

VIDEO button

Wired

Top Control

INPUT button

Computer 1 (Digital)

Remote Control

Direct Operation

Menu Operation

Press the MENU button to display the On-Screen Menu. Use the Point ◄► buttons to move the red frame pointer to the Input Menu icon.

When selecting Auto, the projector automatically detects incoming video signal, and adjusts itself to optimize its performance. The projector selects connection in the following order:

1. S-video

2. Video

Auto

When video input signal is connected to the VIDEO jack, select Video.

Video

When video input signal is connected to the SVIDEO jack, select S-video.

S-video

Notes:

• Wired and Wireless are for the Network function. See the owner’s manual “Network Set-up and Operation” .

• When the Input Search function is set to “On1” or “On2”, the input signal will be searched automatically (p.50).

• When Monitor out is selected in the Terminal function (p.50), Computer 2 is not displayed.

Wireless

Video Input

Choose Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control. Before using these buttons, correct input source should be selected through Menu operation as described below.

Computer

Input Menu

Use the Point ▲▼ buttons to move the red arrow pointer to Computer 2 and then press the SELECT button.

After the Source Select Menu appeared for Computer 2, move the pointer to Component or RGB(Scart) and then press the SELECT button.

Input Source Selection (Component, RGB Scart 21-pin)

Move the pointer (red arrow) to Computer 2 and press the SELECT button.

Input Menu icon

Move the pointer to Component or RGB(Scart) and press the SELECT button.

Source Select Menu

When the input source is coming from video equipment connected to the COMPUTER IN 2/COMP ONE NT IN terminal with a Component-VGA Cable, select Component.

Component

When the input source is coming from video equipment connected to the COMPUTER IN 2/COMPONENT IN terminal with a ScartVGA Cable, select RGB (Scart).

RGB (Scart)

Computer 1 (Analog)

Video

Computer 2

COMPUTER button

Wired

INPUT button

Computer 1 (Digital)

Remote Control

Computer 1 (Analog)

Computer 2

Computer 1 (Digital)

Direct Operation

Menu Operation

Press the MENU button to display the On-Screen Menu. Use the Point ◄► buttons to move the red frame pointer to the Input Menu icon.

Top Control

Note:

• Wired and Wireless are for the Network function. See owner’s manual “Network Set-up and Operation” .

• When the Input Search function is set to “On1” or “On2”, the input signal will be searched automatically (p.50).

• When Monitor out is selected in the Terminal function (p.50), Computer 2 is not displayed.

Wireless

Video System Selection

Press the MENU button to display the On-Screen Menu. Use the Point ◄► buttons to move the red frame pointer to the AV System Menu icon.

AV System Menu (Video or S-Video)

AV System Menu (Component)

Use the Point ▲▼ buttons to move the red arrow pointer to the desired system and then press the SELECT button.

If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.

Mo ve th e pointer to the desired system and press the SELECT button.

PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N

The projector automatically detects an incoming video signal, and adjusts itself to optimize its performance.

If the projector cannot reproduce proper video image, select a specific component video signal format from among 480i, 575i, 480p, 575p, 720p, 1035i, and 1080i.

Auto

COMPONENT VIDEO SIGNAL FORMAT

Video or S-Video

Component

The projector automatically detects an incoming video system, and adjusts itself to optimize its performance. When Video System is PAL-M or PAL-N, select the system manually.

Auto

AV System Menu icon The selected system is displayed.

Mo ve th e pointer to the desired system and press the SELECT button.

V System Menu icon The selected system is displayed.

Note:

• The AV System Menu cannot be selected when selecting RGB (Scart).

Video Input

Move the red frame pointer to the desired image mode and press the SELECT button.

The selected image mode is check marked.

Image Select Menu

Standard

Cinema

Blackboard(Green)

For viewing with the user preset image mode in the Image Adjust Menu (see pages 43–44).

Image1–4

Image Select Menu icon

Select the desired image mode from among Dynamic, Standard, Cinema, Blackboard (Green), Image 1, Image 2, Image 3, and Image 4 by pressing the IMAGE button on the remote control.

Standard

Picture mode adjusted with fine tone.

Cinema

Blackboard (Green)

Image 1–

IMAGE button

Dynamic

Cinema

Image 1

Image 2

Image 3

Image 4

Image Mode Selection

For the image projected on a blackboard. See above for further description.

Blackboard

(Green)

Dynamic

Standard

Remote Control

IMAGE button

Direct Operation

For viewing pictures in a bright room.

Normal picture mode preset on the projector.

For viewing with the user preset image mode in the Image Adjust Menu (see pages 43–44). This Image memory is provided in each computer, component, and video input source.

Press the MENU button to display the On-Screen Menu. Use the Point ◄► buttons to move the red frame pointer to the Image Select Menu icon.

Use the Point ▲▼ buttons to move the red frame pointer to the desired image mode and then press the SELECT button.

Menu Operation

For viewing pictures in a bright room.

Normal picture mode preset on the projector.

Picture mode adjusted with fine tone.

Image Adjustment

Press the MENU button to display the On-Screen Menu. Use the Point ◄► buttons to move the red frame pointer to the Image Adjust Menu icon.

Press the Point ◄ button to decrease the contrast; press the Point ► button to increase the contrast (from 0 to 63).

Press the Point ◄ button to decrease the brightness; press the Point ► button to increase the brightness (from 0 to 63).

Contrast

Brightness

Press the Point ◄ button to lighten red tone; press the Point

► button to deepen red tone (from 0 to 63).

White balance (Red)

Press the Point ◄ button to lighten green tone; press the Point ► button to deepen green tone (from 0 to 63).

White balance (Green)

Press the Point ◄ button to lighten blue tone; press the Point ► button to deepen blue tone (from 0 to 63).

White balance (Blue)

Use the Point ◄► buttons to select the desired Color temp. level (High, Mid, Low, or XLow).

Color temp.

Press the Point ◄ button decrease the intensity of the color; press the Point ►button increase the intensity of the color (from 0 to 63).

Press the Point ◄► buttons to adjust the tint value to get a proper color balance (from 0 to 63).

Color

Tint

Notes:

• When the White balance Red, Green, or Blue is adjusted, the Color temp. level will change to “Adj.”.

•

Tint cannot be selected when the video system is PAL,

SECAM, PAL-M, or PAL-N (p.41).

Use the Point ◄► buttons to adjust the setting value.

Move the red frame pointer to the desired item and then press the SELECT button.

Image Adjust Menu

Press the SELECT button at this item to display other items.

Image Adjust Menu icon

Press the SELECT button here to display the previous items.

Video Input

Use the Point ◄► buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15).

Gamma

Press the Point ◄ button to decrease the sharpness of the image; press the Point ► button to increase the sharpness of the image (from 0 to 15).

Sharpness

An interlaced video signal can be displayed in progressive mode. Select one of the following options.

Off .......... Disabled.

L1 .......... For an active picture.

L2 .......... For a still picture.

Film ........ For watching a film. With this function, the

projector reproduces pictures faithful to the original film quality.

Progressive

Noise reduction

Noise interference on the screen can be reduced. Select one of the following options to get smoother images.

Off .......... Disabled.

L1 .......... Lower reduction

L2 .......... Higher reduction

Notes:

• Noise reduction and Progress ive cannot be selected when 480p, 575p, 720p, 1035i, or 1080i is selected (p.41).

•

Reset and Store icons will be displayed when any

adjustment is made.

To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select [Yes]. All adjustments will return to their previous figures.

Reset

Store

Exit the Image Adjust Menu.

Quit

Imag e Mode Menu Move the red frame pointer to an image item to be set and t h en p r es s t h e SELECT button.

Store icon

A confirmation box appears and then select [Yes].

This projector has the picture screen resize function, which enables you to customize the image size.

Normal

Screen Size Adjustment

Screen Menu

Press the MENU button to display the On-Screen Menu. Use the Point ◄► buttons to move the red frame pointer to the Screen Menu icon.

Use the Point ▲▼ buttons to move the red frame pointer to the desired function and then press the SELECT button.

Provide the image at the 4:3 normal video aspect ratio.

Custom

Adjust the screen scale and position manually with this function. Press the SELECT button at Custom and the "Custom" is displayed on the screen for a few seconds and then the Aspect dialog box appears.

Scale H/V .......... Adjust the Horizontal/Vertical screen

scale.

H&V ................... When set to "On", the aspect ratio is

fixed. The "Scale V" appears dimmed and becomes unavailable. Adjust the "Sca le H", then the screen scale is automatically modified based on the aspect ratio.

Position H/V.....Adjust the Horizontal/Vertical screen

position.

Common ............ Save the adjusted scale to all the inputs.

Press the SELECT button at Common to display a confirmation box. To save the scale, press the SELECT button at "Yes", When Custom is selected, the saved scale is used.

Reset ................. Reset the all adjusted values. Press

the SELECT button at Reset to display a confirmation box. To reset, press the SELECT button at "Yes".

Notes:

• When no signal is detected, "Normal" is set automatically and the Aspect dialog box disappears.

•

The adjustable range for Scale H/V

and Position H/V is limited depending on the input signal.

• "Wide" cannot be operate d when 720p, 1035i, or 1080i is selected in the AV System Menu (p.41).

Press the SELECT button at Common or Reset, to display a confirmation box.

Wide

Provide the image at the 16:9 wide screen ratio.

Screen Menu icon

Move the red frame pointer to the desired function and press the SELECT button.

Language

The language used in the On-Screen Menu is available in English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Finnish, Polish, Hungarian, Romanian, Russian, Chinese, Korean, and Japanese.

Set the red frame pointer to the item and pr e s s t h e SELECT button.

Press the SELECT button at Lan guage , th en the Language Menu appears.

Setting Menu (Language)

Setting Menu icon

Setting

Auto setup

This function enables Auto Keystone correction and Auto PC adjustment by pressing the AUTO SETUP/CANCEL button on the top control or the AUTO SET/CANCEL button on the remote control. Settings for those functions can be altered as follows:

Auto PC

Adj.

On. . . Enables Auto PC Adjustment when pressing

the AUTO SET/CANCEL button on the remote control or the AUTO SETUP/CANCEL button on the top control.

f. . . Disables Auto PC Adjustment.

Auto Keystone

Auto....Always works and corrects keystone distortion

according to the projector's tilt.

Manual... Works only when pressing the AUTO SET/

CANCEL button on the remote control or the AUTO SETUP/CANCEL button on the top control.

f. . . Disables Auto Keystone.

Notes:

• Auto PC Adj. and Auto Keystone cannot be set "Off" at the same time.

•

Auto Keystone corrects vertical distortion only, not correct

horizontal distortion.

•

The Auto Keystone cannot work when Ceiling feature is set

"On" in the Setting menu (p.50).

•

Perfect correction of the image distortion cannot be ensured

with the Auto setup function. If the distortion is not corrected pr ope rly by p res sing t he AUTO S ETUP/ CAN CEL or AUTO SET/CANCEL button, adjust manually by pressing the KEYSTONE button on the remote control or selecting Keystone in the Setting menu (pp.25, 47).

•

Fine sync, Total dots, Horizontal and Vertical position of

some computers cannot be fully adjusted with the Auto PC Adjustment function. When the image is not provided properly with this operation, manual adjustments are required (pp.33–34).

Auto setup

Select Auto setup and this box appears. Choose the de sir ed s ett ing for Au to keystone and Auto PC adj. with the Point

◄► buttons.

Press the SELECT button here to display the other languages.

Press the MENU button to display the On-Screen Menu. Use the Point ◄► buttons to move the red frame pointer to the Setting Menu icon.

Use the Point ▲▼ buttons to move the red frame pointer to the desired item and then press the SELECT button. The Setting dialog box appears.

This projector has a Setting menu that allows you to set up the other various functions described below.

Display

Blue back

When this function is “On,” a blue image is displayed while the input signal is not detected.

Keystone

This function is used to store or reset the keystone correction when the AC power cord is unplugged. Use the Point ◄► buttons to switch between each option.

Store ........ Keep the keystone correction even when the

AC power cord is unplugged.

Reset ....... Release the keystone correction when the AC

power cord is unplugged.

To correct keystone distortion, press the SELECT button. The “Keystone” appears on the screen. Use the Point ▲▼ buttons to correct keystone distortion (p.25).

Keystone

This function decides whether to display On-Screen Displays.

On ............................ Show all the On-Screen displays.

Use this function when you want to project images after the lamp becomes bright enough. The factory default setting is in this option.

Countdown Of

f ......... Show the input image instead of

the countdown when turning on the projector. Use this function when you want to project the image as early as possible even when the lamp is not bright enough.

Off ............................ Hide the On-Screen Displays except;

● On-Screen Menu

● “Power off?” (p.22)

● “No signal” for Power management

(p.51)

● “Please wait ...”

● Arrows for the True function in the

Screen Menu (p.37)

Use the Point ◄► buttons to switch between the options.

Setting

Select [Yes] to capture the projected image.

Select [Yes] to stop capturing.

Capture

Logo (Logo and Logo PIN code lock settings)

Logo select

This function allows you to customize the screen logo with Logo select, capture, and Logo PIN code lock functions.

Note:

• When “On” is selected in the Logo PIN code lock function, Logo select and capture functions cannot be selected.

Capture

This function enables you to capture an image being projected to use it for a starting-up display or interval of presentations.

Select capture and press the SELECT button. A confirmation box appears and select [Yes] to capture the projected image.

After capturing the projected image, go to the Logo select function and set it to “User”. Then the captured image will be displayed the next time you turn on the projector or when you press the NO SHOW button (see page 28).

To cancel the capture function, select [No].

Logo select

This function decides on the starting-up display from among following options.

User ......... Show the image you captured

Default ..... Show the factory-set logo

Off ............ Show the countdown display only

Notes:

• Before capturing an image, select “Standard” in the Image Select Menu to capture a proper image (pp.35, 42).

•

A signal from a computer can be captured up to XGA

(1024 x 768). A signal from video equipment can be captured except for 720p, 1035i, and 1080i.

• When capturing the image that has been adjusted by the Keystone function, the adjusted data is automatically reset and the projector captures an image without keystone correction.

• When the Logo PIN code lock function is set to “On,” the capture function cannot be selected.

• When starting to capture a new image, the previously stored image is cleared even if you cancel the capturing.

• When there is no captured image or it is interrupted while capturing a image, "User" cannot be selected, you can only switch between Default and Off.

Logo PIN code lock

Setting

This function prevents an unauthorized person from changing the screen logo.

Off ............ The screen logo can be changed freely from

the Logo Menu (p.48).

On ............ The screen logo cannot be changed without

a Logo PIN code.

If you want to change the Logo PIN code lock setting, press the SELECT button and the Logo PIN code dialog box appears. Enter a Logo PIN code by following the steps below. The initial Logo PIN code is set to “4321” at the factory.

Logo PIN code lock

Enter a Logo PIN code

Use the Point ▲▼ buttons to enter a number. Press the Point ► button to fix the number and move the red frame pointer to the next box. The number changes to “.” If you fixed an incorrect number, use the Point ◄ button to move the pointer to the number you want to correct, and then enter the correct number.

Repeat this step to complete entering a four-digit number.

After entering the four-digit number, move the pointer to “Set.” Press the SELECT button so that you can start to operate the projector.

If you entered an incorrect Logo PIN code, “Logo PIN code” and the number (    ) will turn red for a moment. Enter the correct Logo PIN code all over again.

Change the Logo PIN code

Logo PIN code can be changed to your desired four-digit number. Press the Point ▼ button to select “Logo PIN code change” and then press the SELECT button. The New Logo PIN code input dialog box appears. Set a new Logo PIN code.

Be sure to note the new Logo PIN code and keep it at hand. If you lost the number, you could no longer change the Logo PIN code setting. For details on PIN code setting, refer to “PIN code lock” on pages 53–54.

Use the Point ◄► buttons to switch On/Off, and then press the Point ▼ button to move the pointer to “Quit.” Press the SELECT button to close the dialog box.

Change the Logo PIN code lock setting

Enter a Logo PIN code

After a correct Logo PIN code is entered, the following dialog box appears.

CAUTION: WHEN YOU HAVE CHANGED THE LOGO PIN CODE, WRITE DOWN THE NEW PIN CODE IN COLUMN OF THE LOGO PIN CODE NO. MEMO ON PAG E 75, AND KEEP IT SECURELY. SHOULD THE LOGO PIN CODE BE LOST OR FORGOTT EN, THE LO GO PIN CODE SETTING CAN NO LONGER BE CHANGED.

Change the Logo PIN code lock setting

Change the Logo PIN code

Use the Point ◄► buttons to switch On/Off.

Setting

Ceiling

Rear

Ceiling

When this function is set to “On,” the picture will be top/ bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector.

Rear

When this function is set to “On,” the picture will be left/right reversed. This function is used to project the image from rear of the screen.

Input search

This function detects the input signal automatically. When a signal is found, the search will stop. Use the Point ◄► buttons to select one of the following options.

Off .......... Input search will not work.

On1 ........ Input search works under the following situation.

– When pressing the INPUT button on the top

control.

– When pressing the COMPUTER button or

VIDEO button on the remote control.

On2 ........ Input search works under the following situation.

– When turning on the projector by pressing

the POWER ON/STAND-BY button on the top

control or the remote control. – When pressing the COMPUTER button or

VIDEO button on the remote control. – When pressing the INPUT button on the top

control. – When the current input signal is cut off.*

*If the No show or Freeze function is active, cancel it to

activate the Input search. It is also unavailable when OnScreen menu is displayed.

Notes:

• While Input search is set to “On1” or “On2,” the status of Input and Lamp are displayed every time the signal is switched.

•

Only the last selected input source can be detected.

• If the INPUT button on the top control or COMPUTER, VIDEO or NETWORK buttons on the remote control is pressed during Input search is in progress, Input search will stop and go back to the previous input signal.

Terminal

The C OMPUT ER IN 2/COM PONE NT IN / MONIT OR OUT terminal on the back of the projector is switchable for computer input or monitor output. (See page 10) Select

Computer 2 or Monitor Out with the Point ◄► buttons.

Computer 2. . . computer input Monitor Out. . . monitor out

Terminal function is not available when selecting Computer 2 to the input source. Change the input source to the others (Computer1 or Video) so that the Terminal function will be available. (pp.29-30,39-40)

Power management

Time left before Lamp is off.

Power management

For reducing power consumption as well as maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not operated for a certain period.

If the input signal is interrupted and no button is pressed for more than 30 seconds, the timer display with “No signal” appears. It starts the countdown until the lamp is turned off. Use the Point ◄► buttons to set the countdown timer.

Select one of the following options:

Ready .................. When the lamp has been fully cooled

down, the POWER indicator changes to green blinking. In this condition, the projection lamp will be turned on if the input signal is reconnected or any button on the top control or remote control is pressed.

Shut down............ When the lamp has been fully cooled

down, the power will be turned off.

Off ........................ Power management function is off.

Standby mode

This function is available when operating the projector via network.

Normal ....... Supply the power to the network function

even after turning off the projector. You can turn on/off the projector via network, modify network environment, and receive an e-mail about projector status while the projector is powered off.

Eco ............ Select “Eco” when you do not use the projector

via network. The projector’s network function will stop when turning off the projector.

Refer to the owner’s manual “Network Set-up and Operation”.

Note:

•

When selecting Normal, the cooling fans may be running

depending on the temperature inside the projector even if the projector is turned off.

Note:

•

Factory default is "Ready: 5 min.".

Press the SELECT button at Power management and this dialog box appears. Use the Point

◄► buttons to choose

on e of the three options. Press the Point

▼ button to

select the timer, and then use the Point

◄► buttons to

set timer.

Setting

On start

Remote control

Pointer

When this function is set to “On,” the projector will be automatically turned on just by connecting the AC power cord to a wall outlet.

Note:

•

Be sure to turn off the projector properly (see “Turning

Off the Projector” on page 22). If the projector is turned off in the incorrect sequence, the On start function does not work properly.

You can emphasize a part of the projected image with this function. Use the Point ▲▼ buttons to choose either Spotlight or Pointer and press the SELECT button. Then use the Point ◄► buttons to select a size of the Spotlight (Large, Middle, or Small) or a pattern of the Pointer (Arrow, Finger, or Dot). See “Pointer Function” on page 13.

Pointer

The eight different remote control codes (Code 1–Code 8) are assigned to the projector; the factory-set, initial code (Code 1) and the other seven codes (Code 2 to Code 8).

The same code should set on both the projector and the remote control. For example, operating the projector in “Code 7”, the remote control code also must be switched to “Code 7”.

To change the code for the projector Select a remote control code in this Setting Menu.

To change the code for the remote control: While holding down the MENU button, press the IMAGE

button the number of times corresponding to the remote control code for the projector. See “Remote Control Code” on page 14.

This function allows you to change brightness of the screen.

Normal ....... Normal brightness

Auto ........... The brightness according to the input signal

(between High and Eco mode).

Eco ............ Lower brightness reduces the lamp power

consumption and extends the lamp life.

Lamp control

Us e the Point ▲▼ buttons to choose either Spo tlig ht o r P o int er, and then use the Point

◄► buttons to swi tch

between the options.

Key lock

Security (Key lock and PIN code lock)

PIN code lock

This function locks the top control and remote control buttons to prevent operation by unauthorized persons.

..... Unlocked.

..... Lock the operation of the top control. To

unlock, use the remote control.

..... lock the operation of the remote control.

To unlock, use the top control.

If the top control accidentally becomes locked and you do not have the remote control nearby or there is something wrong with your remote control, contact the dealer where you purchased the projector or the service center.

This function allows you to use the Key lock and PIN code lock function to set the security for the projector operation.

Select Key lock. Use the Point

▲▼ buttons

to choose one of the op tions and s elect [Yes] to activate it.

This function prevents the projector from being operated by unauthorized persons and provides the following setting options for security.

Off ............ Unlocked.

On1 .......... Enter the PIN code every time turning on

the projector.

On2 .......... Enter

the PIN code to operate the projector once the power cord is disconnected; as long as the AC power cord is connected, the projector can be operated without a PIN code.

Whenever you change the PIN code lock setting or the PIN code (the four-digit number), you are required to enter the PIN code. The “1234” is set as the initial PIN code at the factory.

If you want to change the PIN code lock setting, Press the SELECT button and th e PIN code dialog box appears.

When the projector is locked with a PIN code, the PIN code lock symbol appears on the menu bar.

Setting

Change the PIN code lock setting

Use the Point ◄► buttons to switch between the options.

Use the Point ◄► buttons to select Off, On1, or On2 and then move the pointer to “Quit” with the Point ▼ button. Press the SELECT button to close the dialog box.

Change the PIN code lock setting

Enter a PIN code

Repeat this step to complete entering a four-digit number.

After entering the four-digit number, move the pointer to “Set.” Press the SELECT button so that you can start to operate the projector.

If you entered an incorrect PIN code, “PIN code” and the number () will turn red for a moment. Enter the correct PIN code all over again.

Enter a PIN code

After a correct PIN code is entered, the following dialog box appears.

The PIN code can be changed to your desired fourdigit number. Press the Point ▼ button to select “PIN code change” and press the SELECT button. The New PIN code input dialog box appears. Set a new PIN code.

Change the PIN code

CAUTION: WHEN YOU HAVE CHANGED THE PIN CODE, WRITE DOWN THE NEW PIN CODE IN COLUMN OF THE PIN CODE NO. MEMO ON PAGE 75, AND KEEP IT SECURELY. IF YOU FORGET YOUR PIN CODE, THE PROJECTOR CAN NO LONGER BE STARTED.

This function provides the following options in the cooling fans’ operation when the projector is turned off (p.22).

L1 ...... Normal operation

L2 ...... Slower and lower-sound than the normal operation

(L1), but it takes more time to cool the projector down.

Fan

Setting

Choose the running speed of cooling fans from the following options.

Normal ..... Normal speed

Max .......... Faster than the normal speed.

This function is used to set the cooling fans’ operation to the projector’s setting environment. Set this function properly in accordance with the projector’s installation method. Otherwise, the cooling fans will not work properly and that causes malfunctions of the projector and decreases the lamp life.

Fan control

Fan

Warning log

This function records anomalous operations while the projector is in operation and use it when diagnosing faults. Up to 10 warning logs are displayed with the latest warning message at the top of the list, followed by previous warning messages in chronological order.

Note:

•

When the Factory default function is executed, all the

warning log records will be deleted.

This function is used to reset the lamp counter.

When the lamp life is left less than 100 hours, the Lamp replacement icon (Fig.1) will appear on the screen,indicating that the end of lamp life is approaching.

When the lamp life is left 0 hour, the Lamp replacement icon (Fig.2) will appear on the screen, indicating that the end of lamp life is reached.

When replacing the projection lamp, reset the lamp counter. See "Resetting the Lamp Counter" on page 61.

Lamp counter

This icon appears on the screen when the end of lamp life is approaching.

This icon appears on the screen when the end of lamp life is reached.

Fig

.1 Lamp replacement icon

Fig

.2 Lamp replacement icon

Note:

• This icon also appears at turning on and selecting input source.

Note:

•

At turning on, the icon (Fig.2) will appear.

At selecting input source, the icon (Fig.1)

will appear.

Note:

•

The Lamp replacement icons (Fig.1 and Fig.2) will not

appear when the Display function is set to “Off” (p.47), during “Freeze” (p.27), or “No show” (p.28).

Setting

Factory default

This function returns all setting values except for the user logo, PIN code lock, Logo PIN code lock, lamp counter, and filter counter to the factory default settings.

Exit the Setting Menu.

Quit

Select Factory default and this box appears. Select [Yes], and the next box appears.

Select [Yes] to activate it.

Factory default

This function is used to set a frequency for the filter cleaning.

When the projector reached a specified time between cleanings, a Filter warning icon appears on the screen, notifying the cleaning is necessary. After cleaning the filter, be sure to select RESET and set the timer. The Filter warning icon will not turn off until the filter counter is reset.

For details about resetting the timer, refer to “Resetting the Filter Counter” on page 58.

Filter counter

Use the Point ◄► buttons to set the timer. Select from (Off/100H/ 200H/ 300H) depending on the use environment.

Filter warning icon appears on the screen at a set time.

Fig

.3 Filter warning icon

Fig.4 Filter warning icon

Note:

• This icon also appears at turning on..

Notes:

•

At selecting input source, the icon (Fig.4)

will appear..

•

The Filter warning icons (Fig.3 and

Fig.4) will not appear when the Display function is set to “Off” (p.47), during “Freeze”(p.27), or "No show" (p.28).

The Warning Temp. indicator shows the state of the function which protects the projector. Check the state of the Warning Temp. indicator and the POWER indicator to take proper maintenance.

WARNING TEMP. indicator

The projector is shut down and the Warning Temp. indicator is blinking red.

When the temperature inside the projector reaches a certain level, the projector will be automatically shut down to protect the inside of the projector. The POWER indicator is blinking while the projector is being cooled down. When the projector has cooled down enough (to its normal operating temperature), it can be turned on again by pressing the POWER ON/STANDBY button.

The projector is shut down and the Warning Temp. indicator lights red.

When the projector detects an abnormal condition, it is automatically shut down to protect the inside of the projector and the Warning Temp. indicator lights red. In this case, unplug the AC power cord and reconnect it, and then turn the projector on once again to verify operation. If the projector cannot be turned on and the Warning Temp. indicator still lights red, unplug the AC power cord and contact the service station.

CAUTION

DO NOT LEAVE THE PROJECTOR WITH THE AC POWER CORD CONNECTED UNDER AN ABNORMAL CONDITION. IT MAY RESULT IN FIRE OR ELECTRIC SHOCK.

Maintenance and Cleaning

Top Control

Note:

• The Warning Temp. indicator continues to blink even after the temperature inside the projector returns to normal. When the projector is turned on again, the Warning Temp. indicator stops blinking.

Then check the matters below:

– Did you provide appropriate space for the projector to be

ventilated? Check the installing condition to see if the air vents of the projector are not blocked.

– Has the projector been installed near an Air-Conditioning/

Heating Duct or Vent? Move the installation of the projector away from the duct or vent.

– Is the filter clean? Clean the filter periodically.

WARNING TEMP. emit a red light

WAR NI NG TEMP. blinking red

Maintenance and Cleaning

Turn off the projector, and unplug the AC power cord from the AC outlet.

Turn the projector over and remove the air filters by pulling the latches upward.

Filter prevents dust from accumulating on the optical elements inside the projector. Should the air filters become clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup and adversely affect the life of the projector. If a “Filter warning” icon appears on the screen, clean the air filters immediately. Clean the air filters by following the steps below.

Gently clean the air filters by using a brush or rinse it softly.

When rinsing the air filters, dry it well. Replace the air filters properly. Make sure that the air filters are fully inserted to the projector.

CAUTION Do not operate the projector with the air filters removed. Dust may accumulate on the optical elements degrading picture quality. Do not put anything into the air vents. Doing so may result in malfunction of the projector.

RECOMMENDATION

We recommend avoiding dusty/smoky environments wh en you operat e the proj ect or. U sage in th ese environments may cause poor image quality.

When using the projector under dusty or smoky conditions,

dust may accumulate on a lens, LCD panels, or optical elements inside the projector degrading the quality of a projected image. When the symptoms above are noticed, contact your authorized dealer or service station for proper cleaning.

Note:

• When reinserting this air filters, be sure that the slit part is facing the outer side.

Be sure to reset the Filter counter after cleaning or replacing the filters.

Press the MENU button to display the On-Screen Menu. Use the Point ◄► buttons to move the red frame pointer to the Setting Menu icon.

Use the Point ▲▼ buttons to move the red frame pointer to Filter counter and then press the SELECT bu tton. A dialo g box appears showing th e total accumulated time of the filter use, a timer setting option, and the reset option. Select Reset and the “Fil ter counter Rese t?” appears. Sel ect [Yes] to continue.

Resetting the Filter Counter

Filter counter

Select Reset and the “Filter counter Reset?” appears.

Select [Yes], then another confirmation box appears.

Select [Yes] again to reset the Filter counter.

Another confirmation dialog box appears, select [Yes] to reset the Filter counter.

Air filters

Pull up and remove.

Cleaning the Air Filters

Cleaning the Projector Cabinet

Cleaning the Projection Lens

Unplug the AC power cord before cleaning.

Gently wipe the projection lens with a cleaning cloth that contains a small amount of non-abrasive camera lens cleaner, or use a lens cleaning paper or commercially available air blower to clean the lens.

Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents, or other harsh chemicals might scratch the surface of the lens.

Unplug the AC power cord before cleaning.

Gently wipe the projector body with a soft dry cleaning cloth. When the cabinet is heavily soiled, use a small amount of mild detergent and finish with a soft dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents, or other harsh chemicals might scratch the surface of the cabinet.

Wh en t he project or is not in us e, p ut the proje ctor in an appropriate carrying case to protect it from dust and scratches.

When moving this projector or while not using it over an extended period of time, replace the lens cap.

Attach the lens cap according to the following procedures.

Pass the string through a hole of the lens cap.

Turn over the projector .

Attaching the Lens Cap

Attach the string with lens cap to a hole at the bottom of the projector and secure it with a screw.

Lens Cap

String for the lens cap Secure it to the hole with a screw.

Hole

Maintenance and Cleaning

When the projection lamp of the projector reaches its end of life, the Lamp replacement icon appears on the screen and LAMP REPLACE indicator lights yellow. Replace the lamp with a new one promptly. The timing when the LAMP REPLACE indicator should light is depending on the lamp mode.

Follow these steps to replace the lamp.

Lamp

ORDER REPLACEMENT LAMP

Replacement lamp can be ordered through your dealer. When ordering a projection lamp, give the following information to the dealer.

● Model No. of your projector : PLC-XU88

● Replacement Lamp Type No. : POA-LMP115

(Service Parts No. 610 334 9565)

For continued safety, replace with a lamp of the same type. Do not drop a lamp or touch a glass bulb! The glass can shatter and may cause injury.

Allow a projector to cool for at least 45 minutes before you open the Lamp Cover. The inside of the projector can become very hot.

CAUTION

Screw

Turn off the projector and unplug the AC power cord. Let the projector cool for at least 45 minutes.

Remove the two (2) screws that secure the lamp. Lift the lamp out of the projector by using the handle.

Replace the lamp with a new one and secure the two (2) screws. Make sure that the lamp is set properly. Close the lamp cover and secure the screw.

Remove the screw and open the lamp cover.

Connect the AC power cord to the projector and turn on the projector.

Reset the lamp counter.

See “Resetting the Lamp Counter” on the next page.

Lamp Replacement

Handle

Screw

CAUTION

Lamp Cover

Top Control

LAMP REPLACE indicator

Lamp replacement icon

Note:

• The Lamp replacement icon will not appear when the

Display function is set to “Off” (p.47), during “Freeze”

(p.27), or “No show” (p.28).

Screw

Maintenance and Cleaning

This projector uses a high-pressure lamp which must be handled carefully and properly. Improper handling may result in accidents, injury, or create a fire hazard.

● Lamp life may differ from lamp to lamp and according to the environment of use. There is no guarantee

of the same life for each lamp. Some lamps may fail or terminate their life in a shorter period of time than other similar lamps.

● If the projector indicates that the lamp should be replaced, i.e., if the LAMP REPLACE indicator lights

up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down.

(Follow carefully the instructions in the Lamp Replacement section of this manual.) Continuous use of

the lamp with the LAMP REPLACE indicator lighted may increase the risk of lamp explosion.

● A Lamp may explode as a result of vibration, shock or degradation as a result of hours of use as its

lifetime draws to an end. Risk of explosion may differ according to the environment or conditions in which the projector and lamp are being used.

IF A LAMP EXPLODES, THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE TAKEN.

If a lamp explodes, disconnect the projector’s AC plug from the AC outlet immediately. Contact an authorized service station for a checkup of the unit and replacement of the lamp. Additionally, check carefully to ensure that there are no broken shards or pieces of glass around the projector or coming out from the cooling air circulation holes. Any broken shards found should be cleaned up carefully. No one should check the inside of the projector except those who are authorized trained technicians and who are familiar with projector service. Inappropriate attempts to service the unit by anyone, especially those who are not appropriately trained to do so, may result in an accident or injury caused by pieces of broken glass.

LAMP HANDLING PRECAUTIONS

Resetting the Lamp Counter

Be sure to reset the Lamp counter after the lamp is replaced. When the Lamp counter is reset, the LAMP REPLACE indicator stops lighting and the Lamp replacement icon disappears.

Press the MENU button to display the On-Screen Menu. Use the Point ◄► buttons to move the red frame pointer to the Setting Menu icon.

Use the Point ▲▼ buttons to move the red frame pointer to Lamp counter and then press the SELECT button. A dialog box appears showing the total accumulated time of the lamp usage and the reset option. Select Reset and the “Lamp replacement counter Reset?” appears. Select [Yes] to continue.

Another confirmation dialog box appears, select [Yes] to reset the Lamp counter.

Note:

• Do not reset the Lamp counter without implementing lamp replacement. Be sure to reset the Lamp counter only after replacing the lamp.

Select Reset and the “Lamp replacement counter Reset?” appears.

Select [Yes], then another confirmation box appears.

Select [Yes] again to reset the Lamp counter.

Problem: – Solutions

No power – Plug the power cord of the projector into the AC outlet.

– See if the POWER indicator lights red.

– Wait until the POWER indicator stops blinking to turn on the projector

again. The projector can be turned on after the POWER indicator

turns red. See page 21. – Check the WARNING TEMP.indicator. If the WARNING TEMP. indicator lights red, projector cannot be turned on. See page 57. – Check the projection lamp. See page 60. – Unlock the Key lock function for the projector. See page 53.

The initial display is not shown. – Make sure "Off" or "Countdown off" are not chosen at display function.(see page 47)

The initial display is not same – Make sure "User" or "Off" are not chosen at Logo (select) as the default set. function.(see page 48)

Input signal switches automatically. – Make sure Input search function is adjusted properly. See page 50. (or does not switch automatically)

When the projector is on and you – That is the Filter warning icon. Refer to page 56. press the input button, an icon other than the Lamp mode icon appears.

An icon other than Input mode or – That is the Lamp replacement icon or the Filter warning icon. See Lamp mode icon appears. page 55 or 56.

Image is out of focus. – Adjust focus of the projector. See page 25.

– Provide proper distance between the projector and the projection screen. See page 16. – Check the projection lens to see if it needs cleaning. See page 59. – Moving the projector from a cool to warm place may result in moisture condensation on the projection lens. In such cases, leave the projector off and wait until condensation evaporates.

Image is Left/Right reversed. – Check the Ceiling/Rear function. See page 50. Image is T

op/Bottom reversed. – Check the Top/Bottom function. See page 50.

Picture is not bright enough. – Check if the 'Contrast" or "Brightness" are adjusted properly.(see

page 36,43) – Check if "Image mode" is selected properly.(see page 35,42) – Check the lamp control function.(see page 27,52) – Check the LAMP REPLACE indicator. If it lights, the end of lamp life is approaching. Replace the lamp with a new one promptly.(see page

60)

Appendix

Troubleshooting

Before calling your dealer or service center for assistance, check the items below once again.

– Make sure you have properly connected the projector to peripheral equipment as described on pages 18-20. – Make sure all equipment is connected to AC outlet and the power is turned on. – When the projector does not project an image from the connected computer, restart the computer.

Appendix

No image – Check the connection between your computer or video equipment

and the projector. See pages 18-20. – See if the input signal is correctly output from your computer. Some laptop computers may need to change the setting for monitor output when connecting to a projector. See your computer’s instruction manual for the setting. – It takes about 30 seconds to display an image after turning on the projector. See page 21. – Check the Input singal, color system, video system or computer

system mode. – Make sure the temperature is not out of the specified Operating Temperature (41˚F–95˚F [5˚C–35˚C]). – When "No Show" is operating, the image cannot be displayed. Press the NO SHOW button or any other button on the remote control.

No sound – Check the audio cable connection from audio input source. – Adjust the audio source. – Press the Volume + button. See page 26. – Press the Mute button. See page 26. – When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available – Is the image projected? You will hear the sound only when the image is projected.

The color is strange. – Check the Input signal, color system,video system or computer system mode. – Make sure the "Blackboard" is not selected on Image select menu.(see page 35,42)

Some displays are not seen – Check the Display function. See page 47. during the operation

Auto PC adjustment function –

Check the Input signal. Auto PC function can not work when does not work. 480p,575p.720p,480i,575i,1035i or 1080i is selected or when the digital signal is input into DVI terminal.(see Page 32) – The icon is not available in grayout when the digital signal is input.

The setting does not remain – Make sure you selected "Store" after adjusting s

etting. Some settings

after turning off power. can not be stored if not registered with "Store".(see page 37,44)

Power management does – Power management function can not work w

hile "Freeze" or "No

work. Show" function is running.(see page 51)

Capture function does not work

. – Check the connection and the input signal to see if there is signal.

Auto setup does not work properly. – Make sure "Of

f" is not selected at the Auto setup function.(see page 25,46) – Make sure "On" is not selected at the Ceiling funtion.(see page 50)

Auto keystone function does not – Make sure the Auto keystone function is not set to "Manual". Press work even when the projector is

the AUTO SET UP button on the top control.(see page 25,46)

tipped.

Appendix

The image is distorted or runs off. – Check "PC adjustment" menu or "Screen" menu and adjust them.

(page 33-34, 37-38)

PIN code dialog box appears – PIN code lock is being set. Enter a PIN code (the “1234” or numbers at start-up

. you have set). See pages 21, 53–54.

Page Up/Down function does – Make sure your computer is connected to the projector with USB not work

. cable.(see page 18)

– Check cable connection between the projector and your computer. (see page 18)

The Remote Control does – Check the batteries. not work

. – Make sure no obstruction is between the projector and remote control. – Make sure you are not too far from the projector when using the remote control. Maximum operating range is 16.4'(5 m). – Make sure the code of the remote control is conformed to the projector’s code. See page 52. – Unlock the Key lock function for the remote control function. See page 53. – Check RESET/ON/ALL-OFF switch on the remote control is set to

“ON”. See page 14.

Indicator blinks or lights

. – Chek the status of the projector with referring to "Indicators and

projector Condition".(see page 68 )

Wireless Mouse function does – Check the connection between a projector and yo

ur computer. not work. – Check the mouse setting on you computer. – Make sure the mouse driver is installed on your computer, otherwise, the remote control can not be used as a wireless mouse. – Make sure the signal is from the computer, otherwise, the remote control can not be used as a wireless mouse. – Turn on the projector before turning on the computer.

The exclamation mark appears –

Your operation is invalid. Operate correctly.

on the screen.

Top control does not work. – The top control is not available if the top cotrol is locked at "Key lock" under "Security" of SETTING section. Please check "SETTING" section on page 53.

Uable to unlock the Logo PIN – Contact the dealer where you purchased the pro

jector or the service code lock, Security key lock center. or Security PIN code lock.

WARNING : High voltages are used to operate this projector. Do not attempt to open the cabinet.

If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Specify the model number and explain about the problem. We will advise you how to obtain service.

This symbol on the nameplate means the pro duct is Listed by Underwriters Laboratories I n c. I t i s d e si g ne d a n d man ufac tured t o meet rigi d U.L. safety standards against r i s k of f i r e , c a s u a l t y a n d electrical hazards.

The CE Mark is a Directive conformity mark of the European Community (EC).

Appendix

Pixelworks ICs used.

Appendix

Menu Tree

SVGA 1 Mode 1 Mode 2

- - - -

Auto PC Adj.

Total dots Horizontal Vertical

Display area H Display area V Reset

Dynamic

Real Blackboard (Green) Image 1 Image 2 Image 3

Image Adjust

Contrast Brightness Color temp.

Red

Gamma

Store

Quit

Normal True

Digital zoom –

Full

0–63 0–63

Computer Input

PC Adjust

Mode 1 Mode 2 Mode 3 Mode 4 Mode 5

Image Select

High

0–63

0–15

Image 1 Image 2 Image 3 Image 4

Screen

Quit

Yes/No

* Systems displayed in the System Menu vary

depending on an input signal.

Reset Yes/No

Sharpness

0–15

Computer Input/Video Input

Sound

Volume Mute Quit

On/Off

Sound

0–63

Input

Video Auto

Go to System (3)

Video

Go to System (3)

Go to System (1)

S-video

Standard

Mode 3 Mode 4 Mode 5 Quit

H-sync freq.

Quit

Clamp

Current mode

Digital zoom +

Green Blue

0–63 0–63

Quit

Store

Mode free

System (1)

Quit

Mid Low XLow

Quit

Adj.

N/ARGB (AV HDCP)

N/AComputer 1 (Digital) RGB (PC digital)

Computer 1 (Analog)

Go to System (2)Component

Go to System (1)Computer 2 RGB

N/ARGB (Scart)

See owner’s manual “Network Set-up and Operation”Wired

Image 4

Wireless See owner’s manual “Network Set-up and Operation”

N/A ........ not applicable

Fine sync 0–31

Mode 1 Mode 2

V-sync freq.

Custom

Scale H&V Position Common

Quit

Reset

H/V

H/V Yes/No Yes/No

Wide

On/Off

Appendix

Auto PAL SECAM NTSC NTSC 4.43 PAL-M PAL-N

Video Input

Auto 1080i 1035i 720p 575p 480p 575i 480i

Dynamic

Cinema Blackboard (Green)

Image 1 Image 2 Image 3

Quit

Normal

0–63 0–63

Off

Setting

Image Select

System (2)

System (3)

Image Adjust

Contrast Brightness Color Tint

Red Green Blue Sharpness

Reset Store

Gamma

Progressive

0–63 0–63 0–63 0–15 0–15

Image 1

Screen

Yes/No

Quit

Image 4

Language

Setting

16 languages provided.

On/Off On/Countdown off/Off Logo select

On/Off On/Off

Off

On/Off Normal/Auto/Eco

Code 1–Code 8

Keystone Blue back Display Logo

Ceiling Rear

Power management

On start Lamp control

Remote control

Ready Shut down

Security

PIN code lock

Quit

Timer (1–30 Min.) Quit

L1/L2Fan

Standard

OffNoise reduction

Store/Reset

L1 L2

Mid Low XLow

0–63 0–63

Image 2 Image 3 Image 4

Quit

Off

User

Capture

Yes/No

Off/On Logo PIN code change Quit

Logo PIN code lock

Off Projector Remote control Quit

Key lock

Default

Off/On1/On2 PIN code change Quit

Adj.

Film

Auto setup

On/Off

Standby mode Eco/Normal

Input search Off/On1/On2

Spotlight/PointerPointer Quit

Color temp. High

Quit Auto PC adj.

Auto keystone

Auto Manual Off

Normal/MaxFan control

Warning log

Hour(s)Lamp counter

Yes/No

Hour(s)Filter counter

Yes/No

Off/100H/200H/300H

Reset

Yes/NoFactory default

Quit

Wide

Scale

Position Common

Quit

Reset

H/V

H/V Yes/No Yes/No

Custom

Termianl Computer2/Momitor out

On/Off

H&V

Check the indicators for projector condition.

• • • green. • • • red • • • off

• • • blinks green.

When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly. Reset the lamp replacement counter after replacing the lamp. See pages 60-61.

The projector is off. (The AC power cord is unplugged.)

The projector is in stand-by mode. Press the POWER ON/STANDBY button to turn on the projector.

Projector Condition

POWER

red/green

Indicators

LAMP

REPLACE

yellow

WARNING

TEMP.

red



The projector is preparing for stand-by or the projection lamp is being cooled down. The projector cannot be turned on until cooling is completed and the POWER indicator stops blinking.



The temperature inside the projector is abnormally high. The projector cannot be turned on. When the projector is cooled down enough and the temperature returns to normal, the POWER indicator stops blinking and the projector can be turned on. (The WARNING indicator keeps blinking.) Check and clean the filter.



The projector detects an abnormal condition and cannot be turned on. Unplug the AC power cord and plug it again to turn on the projector. If the projector is turned off again, unplug the AC power cord and contact the dealer or the service center for service and checkup. Do not leave the projector on. It may cause an electric shock or a fire hazard.



The projector is operating normally.



The projector is in the Power management mode.



The projector has been cooled down enough and the temperature returns to normal. When turning on the projector, the WARNING TEMP. indicator stops blinking. Check and clean the air filter.

Indicators and Projector Condition

• • • blinks red.

Appendix

Compatible Computer Specifications

Basically this projector can accept the signal from all computers with the V-, H-Frequency mentioned below and less than 140 MHz of Dot Clock for analog signal and 110 MHz of Dot Clock for digital signal.

When selecting these modes, PC adjustment can be limited.

ON-SCREEN

DISPLAY

RESOLUTION

H-Freq.

(KHz)

V-Freq.

(Hz)

VGA 1 640 x 480 31.47 59.88 VGA 2 720 x 400 31.47 70.09 VGA 3 640 x 400 31.47 70.09 VGA 4 640 x 480 37.86 74.38 VGA 5 640 x 480 37.86 72.81 VGA 6 640 x 480 37.50 75.00

MAC LC13

640 x 480 34.97 66.60

MAC 13 640 x 480 35.00 66.67

MAC 16 832 x 624 49.72 74.55

SXGA 1

1152 x 864

64.20 70.40

SVGA 1 800 x 600 35.156 56.25 SVGA 2 800 x 600 37.88 60.32 SVGA 3 800 x 600 46.875 75.00 SVGA 4 800 x 600

53.674

85.06 SVGA 5 800 x 600 48.08 72.19 SVGA 6 800 x 600 37.90 61.03 SVGA 7 800 x 600 34.50 55.38 SVGA 8 800 x 600 38.00 60.51 SVGA 9 800 x 600 38.60 60.31

SVGA 11 800 x 600 38.00 60.51

ON-SCREEN

DISPLAY

RESOLUTION

H-Freq.

(KHz)

V-Freq.

(Hz)

XGA 10 1024 x 768 XGA 11 1024 x 768 XGA 12 1024 x 768 XGA 13 1024 x 768

62.04 77.07

XGA 14 1024 x 768

61.00 75.70

XGA 15 1024 x 768

35.522

86.96

(Interlace)

46.90 58.20

XGA 8 1024 x 768

47.00 58.30

XGA 9

1024 x 768

58.03 72.00

SXGA 4 1280 x 1024

63.48 79.35

36.00

87.17

(Interlace)

63.34 59.98 SXGA 5 1280 x 1024 SXGA 6 1280 x 1024 SXGA 7 1280 x 1024

63.74 60.01

71.69 67.19

SXGA 10 1280 x 960

81.13 76.107

60.00 60.00

XGA 1 1024 x 768

XGA 4 1024 x 768

48.36 60.00

XGA 6 1024 x 768 XGA 7 1024 x 768

56.476 70.07

48.50 60.02

44.00 54.58

SXGA 8 1280 x 1024 SXGA 9 1280 x 1024

63.98 60.02

79.976 75.025

XGA 5 1024 x 768 60.31 74.92

VGA 7 640 x 480 43.269 85.00

575i

––––––––

15.625

50.00

(Interlace)

480i

––––––––

15.734

60.00

(Interlace)

SXGA 12 1152 x 900 71.40 75.60

SXGA 11 1152 x 900 61.20 65.20

SVGA 10 800 x 600 32.70 51.09

SXGA 13 1280 x 1024 50.00

86.00

(Interlace)

SXGA 2

1280 x 1024 62.50 58.60

SXGA 3 1280 x 1024 63.90 60.00

XGA 2 1024 x 768 68.677 84.997 XGA 3 1024 x 768 60.023 75.03

SXGA 18 1280 x 1024 46.43

86.70

(Interlace)

SXGA 19

1280 x 1024

63.79 60.18

SXGA 14 1280 x 1024 SXGA 15 1280 x 1024 SXGA 16 1280 x 1024 SXGA 17 1152 x 900

50.00

94.00

(Interlace)

63.37 60.01

76.97 72.00

61.85 66.00

MAC 1280 x 960 75.00 75.08 MAC 1280 x 1024 80.00 75.08

1080i

1920 x 1080 33.75

60.00

(Interlace)

720p 1280 x 720

1035i 1920 x 1035

45.00 60.00

33.75

60.00

(Interlace)

1080i

1920 x 1080 28.125

50.00

(Interlace)

SXGA+ 1

1400 x 1050 63.97 60.19

MAC21 1152 x 870 68.68 75.06

UXGA 4 1600 x 1200 93.75 75.00

WXGA 2 1360 x 768 WXGA 3 1376 x 768 WXGA 4 1360 x 768

UXGA 1 1600 x 1200

47.70 60.00

UXGA 2 1600 x 1200

48.36 60.00

UXGA 3 1600 x 1200

56.16 72.00

75.00 60.00

81.25 65.00

WXGA 1

1366 x 768

87.5 70.00

48.36

60.00

SXGA+ 2

1400 x 1050

65.35 60.12

SXGA+ 3

1400 x 1050 65.12 59.90

SXGA 20

1280 x 1024 91.146 85.024

480p

640 x 480 31.47 59.88

575p 768 x 575 31.25 50.00

WXGA 7 1280 x 768 WXGA 8 1280 x 768

60.289 74.893

68.633 84.837

WXGA 6

1280 x 768 47.776 59.87

MAC 19 1024 x 768 60.24 75.08

720p 1280 x 720 37.50 50.00

Appendix

ON-SCREEN

DISPLAY

RESOLUTION

H-Freq.

(KHz)

V-Freq.

(Hz)

D-VGA 640 x 480 31.47 59.94 D-480p 640 x 480 31.47 59.88 D-575p 768 x 575 31.25 50.00

D-SVGA 800 x 600 37.879 60.32

D-WXGA 1

1366 x 768

48.36 60.00

ON-SCREEN

DISPLAY

RESOLUTION

H-Freq.

(KHz)

V-Freq.

(Hz)

D-720p 1280 x 720 37.50 50.00

D-1035i 1920 x 1035 D-1080i 1920 x 1080 D-1080i 1920 x 1080

33.75

60.00

(Interlace)

33.75

60.00

(Interlace)

28.125

50.00

(Interlace)

D-XGA 1024 x 768 43.363 60.00

D-WXGA 2

1360 x 768 47.7 60.00

D-WXGA 3 1376 x 768 48.36 60.00

When the input signal is digital from DVI terminal, refer to the chart below.

Note:

• When the input signal is D-SXGA 1, D-SXGA 2, or D-SXGA 3, images may not be displayed properly depending on computers.

• The specifications are subject to change without notice.

D-WXGA 4

1360 x 768

56.160 72.000

D-WXGA 5

1366 x 768 46.500 50.000 D-WXGA 6 1280 x 768 47.776 59.870 D-WXGA 7 1280 x 768 60.289 74.893

D-SXGA1 1280 x 1024 63.98 60.02 D-SXGA2 1280 x 1024 60.276 58.069

D-1080i60 D-1080i50

D-720p 1280 x 720 45.00 60.00

D-720p50 D-720p60

D-SXGA3 1280 x 1024 31.65 29.80

Technical Specifications

Mechanical Information

Projector Type Multi-media Projector

Dimensions (W x H x D) 335 mm x 79.7 mm x 238.4mm (Not including adjustable feet)

Net Weight 3.4 kg

Feet Adjustment 0˚ to 10˚

Panel Resolution

LCD Panel System 0.63" TFT Active Matrix type, 3 panels

Panel Resolution 1,024 x 768 dots

Number of Pixels 2,359,296 (1,024 x 768 x 3 panels)

Signal Compatibility

Color System

PAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N

High Definition TV Signal 480i, 480p, 575i, 575p, 720p, 1035i, and 1080i

Scanning Frequency H-sync. 15 kHz–100 kHz, V-sync. 50–100 Hz

Optical Information

Projection Image Size (Diagonal) Adjustable from 40” to 300”

Throw Distance 4.3'-51.6'(1.1m –13.1 m)

Projection Lens F1.6-2.5 lens with f=17.7 mm–28.3 mm with manual zoom and focus

Projection Lamp 220 W

Interface

Video Input Jack RCA Type x 1

S-video Input Jack Mini DIN 4 pin x 1

Audio Input Jacks RCA Type x 2

Computer Input 1/DVI-I Input Terminal DVI-I Terminal X 1

Computer Input 2/Component Input /Monitor

Output Terminal Mini D-sub 15 pin X 1

Computer/Component Audio Input Jack Mini Jack (stereo) x 1

Service Port Connector Mini DIN 8 pin x 1

USB Connector USB Series B connector x 1

Audio Output Jack Mini Jack (stereo) x 1 (variable)

LAN Connection Terminal 100 Base-TX (100Mbps)/10 Base-T (10Mbps), RJ45

SD Card Slot

Audio

Internal Audio Amp 1.0 W RMS

Built-in Speaker 1 speaker, ø1.1"(28 mm)

Power

Voltage and Power Consumption AC 100–120 V (3.2A Max. Ampere), 50/60 Hz (The U.S.A and Canada)

AC 200–240 V (1.6A Max. Ampere), 50/60 Hz (Continental Europe and The U.K.)

Operating Environment

Operating Temperature 41˚F–95˚F (5 ˚C–35 ˚C)

Storage Temperature 14˚F–140˚F (-10˚C–60 ˚C)

Remote Control

Battery AAA or LR03 Type x 2

Operating Range 5 m/±30˚

Dimensions 45 mm (W) x 23 mm (H) x 145 mm (D)

Net Weight 3.5 oz 99 g (including batteries)

Laser Pointer

Class II Laser (Max. Output: 1 mW/Wave length: 640–660 nm)

Appendix

Model No.

COMPONENT~VGA Cable : POA-CA-COMPVGA

SCART~VGA

Cable : POA-CA-SCART

VGA-Cable (10 m)

: KA-MC-DB10

The parts listed below are optionally available. When ordering those parts, specify the item name and Model No. to the sales dealer.

Optional Parts

Accessories

Owner’s Manual (CD-ROM)

Quick Reference Guide

AC Power Cord

Remote Control and Batteries

VGA Cable

Lens Cap with String

PIN Code Label

Lamp Replacement Label

Network Application (CD-ROM)

● The specifications are subject to change without notice.

● LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are effective, a tiny fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD

panels.

This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information System Industries Association). This projector supports all commands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1.

For PJ Link password, see page 49 on the owner’s manual “Network Set-up and Operation.”

Projector Input

RGB

Computer1 (Analog)

RGB (AV HDCP)

RGB (PC digital)

Component

RGB (Scart)

Auto

PJLink Input

RGB 2

RGB 1

DIGITAL 2

DIGITAL 1

RGB 3

RGB 4

Video

S-video

VIDEO 2

VIDEO 3

VIDEO 1

NETWORK 1Wired

Computer1 (Digital)

Computer2

Video

PJLink is a registered trademark of JBMIA and pending trademark in some countries.

PJ Link Notice

Wireless NETWORK 2

Parameter

Appendix

Terminal : Mini DIN 8-PIN

SERVICE PORT CONNECTOR

Vcc

- Data

+ Data

Ground

1 2 3 4

3 4



R X D

-----

GND

RTS/CTS

GND GND

1 2 3 4

5 6 7 8

COMPUTER IN 2 /COMPONENT IN /MONITOR OUT (ANALOG)

Terminal: Analog RGB (Mini D-sub 15 pin)

9 678

Configurations of Terminals

Red (R/Cr) Input/Output

Ground (Horiz.sync.)

Green (G/Y) Input/Output

-----

Blue (B/Cb) Input/Output

Ground (Red) Ground (Green) Ground (Blue)

6 7 8

+5V Power/-----

Horiz. sync. Input/Output (Composite H/V sync.)

Ground (Vert.sync.)

DDC Data

/-----

Ground/-----

Vert. sync.

DDC Clock

/-----

14 15

T X D

RX –

TX + TX –

RX +

2 3 4

8 7 6 5 4 3 2 1

5 6 7 8

USB CONNECTOR (Series B)

LAN TERMINAL

-----

----------

DVI-I TERMINAL (DIGITAL/ANALOG)

T.M.D.S. Data2–

No Connect

T.M.D.S. Data2+

No Connect

T.M.D.S. Data2 Shield

DDC Clock DDC Data Analog Vert. sync

6 7 8

T.M.D.S. Data1–

No Connect

T.M.D.S. Data1+

No Connect

T.M.D.S. Data1 Shield

+5V Power Ground (for +5V) Hot Plug Detect

14 15 16

T.M.D.S. Data0–

No Connect

T.M.D.S. Data0+

No Connect

T.M.D.S. Data0 Shield

T.M.D.S. Clock Shield T.M.D.S. Clock+ T.M.D.S. Clock–

22 23 24

Analog Red Input

Analog Ground (R/G/B)

Analog Green Input

Analog Horiz. sync

Analog Blue Input

8 7 6

Appendix Appendix

Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station.

PIN Code Number Memo

Factory default set No: 1 2 3 4*

Factory default set No: 4 3 2 1*

Put the label below (supplied) on in a prominent place of the projector's body while it is locked with a PIN code.

While the projector is locked with the PIN code.

PIN Code Lock No.

Logo PIN Code Lock No.

When using the projector ceiling-mounted, put the Lamp replacement label (supplied) on in a prominent place of the projector's body to check the Replacement Lamp Type Number.

Lamp Replacement Label

*Should the four-digit number be changed, the factory set number will be invalid.

Appendix

Dimensions

88.7(3.49)

132.1(5.20)

246.3(9.70)

106.3(4.19)

136.3(5.37)

5(0.2)

45(1.77)

40(1.57)

79.7(3.14)

47.2(1.86)

3.7(0.15)

4.5(0.18)

90(3.54)

105.5(4.15)

53.5(2.11)

70(2.76)

55(2.17)

84.7(3.33)

228(9.0)

10 MAX

Unit: mm(inch)

Screw Holes for Ceiling Mount Screw: M4 Depth: 12.0(0.472)

KD3AC-A

SANYO Electric Co., Ltd.

Sanyo PLC-XU88 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Features and Design

Table of Contents

To the Owner

Safety Instructions

Moving the Projector

Air Circulation

Installing the Projector in Proper Position

Compliance

Part Names and Functions

Front

Back

Bottom

Rear Terminal

Top Control

Remote Control

Pointer Function

Laser Pointer Function

Remote Control Code

Wireless Mouse Operation

Adjustable Feet

Remote Control Operating Range

Remote Control Battery Installation

Positioning the Projector

Installation

Connecting the AC Power Cord

Connecting to a Computer

Connecting to Video Equipment

Connecting to Component Video Equipment

Turning On the Projector

Basic Operation

Turning Off the Projector

How to Operate the On-Screen Menu

Menu Bar

Zoom and Focus Adjustment

Keystone Correction

Auto Setup Function

Sound Adjustment

Remote Control Operation

Input Source Selection (RGB: Computer 1 (Analog)/Computer 2 )

Computer Input

Input Source Selection (RGB(PC digital), RGB(AV HDCP))

Computer System Selection

Auto PC Adjustment

Manual PC Adjustment

Image Mode Selection

Image Adjustment

Screen Size Adjustment

Input Source Selection (Video, S-video)

Video Input

Video System Selection

Image Mode Selection

Image Adjustment

Screen Size Adjustment

Setting

Setting

WARNING TEMP. indicator

Maintenance and Cleaning

Resetting the Filter Counter

Cleaning the Air Filters

Cleaning the Projector Cabinet

Cleaning the Projection Lens

Attaching the Lens Cap

Lamp Replacement

Resetting the Lamp Counter

Appendix

Troubleshooting

Menu Tree

Indicators and Projector Condition

Compatible Computer Specifications

Technical Specifications

Optional Parts

PJ Link Notice

Configurations of Terminals

PIN Code Number Memo

Lamp Replacement Label

Dimensions