Sanyo PLC-XU50, PLC-XU55, PLC-SU50 User Manual

Multimedia Projector

MODEL PLC-XU55

PLC-XU50
PLC-SU50

Owner’s Manual

2

Table of Contents

TRADEMARKS

● Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple Computer,Inc.

● IBM, VGA, XGA, and PS/2 are trademarks or registered trademarks of International Business Machines, Inc.

● Windows and PowerPoint are registered trademarks of Microsoft Corporation.

● Each name of corporations or products in the owner's manual is a trademark or a registered trademark of its respective

corporation.

Features and Design 8

Basic Operation 19

Computer Input 24

Video Input 32

Setting 38

Appendix 45

Part Names and Functions 9

Front 9
Back 9
Bottom 9
Terminal 10
Top 11
Remote Control 12
Laser Pointer Function 13
Pointer Function 13
Remote Control Code 14
Wireless Mouse Operation 14
Remote Control Operating Range 15
Remote Control Batteries Installation 15

Installation 16

Positioning the Projector 16
Adjustable Feet 16
Connecting to a Computer 17
Connecting to Video Equipment 18

Turning On the Projector 19
Turning Off the Projector 19
Zoom Adjustment 20
Focus Adjustment 20
Keystone Adjustment 20
Picture Freeze Function 20
No Show Function 21
P-Timer Function 21
Sound Adjustment 21
On-Screen Menu 22
Menu Bar 23

Input Source Selection 24
Computer System Selection 25
Computer Adjustment (Auto) 26
Computer Adjustment (Manual) 27
Image Level Selection 29
Image Level Adjustment 30
Screen Size Adjustment 31

Input Source Selection (Video, S-Video) 32
Input Source Selection (Component, RGB Scart 21-Pin) 33
Video System Selection 34
Image Level Selection 35
Image Level Adjustment 36
Screen Size Adjustment 37

Setting 38

Troubleshooting 45
Indicators and Projector Condition 47
Menu Tree 48
Compatible Computer Specifications 50
Technical Specifications 51
Configurations of Terminals 52
Optional Parts 53
Attaching the Lens Cover 54

Table of Contents 2

To the Owner 3

Safety Instructions 4

Compliance 6

Installing the Projector in Proper Position 5
Air Circulation 5
Moving the Projector 5

Connecting the AC Power Cord 7

Maintenance and Cleaning 41

Warning Indicator 41
Cleaning the Air Filters 42
Cleaning the Projection Lens 42
Cleaning the Projector Cabinet 42
Lamp Replacement 43
Lamp Replace Counter 44

3

To the Owner

CAUTION : TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE EXCEPT LAMP REPLACEMENT.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.

THIS SYMBOL INDICATES THAT DANGEROUS
VOLTAGE CONSTITUTING A RISK OF ELECTRIC
SHOCK IS PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE ARE
IMPORTANT OPERATING AND MAINTENANCE
INSTRUCTIONS IN THE OWNER'S MANUAL WITH
THIS UNIT.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Before operating this projector, read this manual thoroughly
and operate the projector properly.
This projector provides many convenient features and
functions. Operating the projector properly enables you to
manage those features and maintains it in better condition for
a considerable time.
Improper operation may result in not only shortening the
product-life, but also malfunctions, fire hazard, or other
accidents.
If your projector seems to operate improperly, read this
manual again, check operations and cable connections and try
the solutions in the “Troubleshooting” section at the end of
this booklet. If the problem still persists, contact the dealer
where you purchased the projector or the service center.

Safety Precaution

WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.

– This projector produces intense light from the projection

lens. Do not stare directly into the lens as possible. Eye
damage could result. Be especially careful that children do
not stare directly into the beam.

– Install the projector in a proper position. If not, it may

result in a fire hazard.

– Provide appropriate space on the top, sides and rear of the

projector cabinet for allowing air circulation and cooling the
projector. Minimum clearance must be maintained. If the
projector is to be built into a compartment or similarly
enclosed, the minimum distances must be maintained. Do
not cover the ventilation slot on the projector. Heat build­up can reduce the service life of your projector, and can
also be dangerous.

– The remote control, supplied to this projector, emits a laser

beam as the Laser pointer function from laser light window
while pressing the LASER button (for 1 minute / Signal
Emission indicator lights red to indicate laser emission). Do
not look into the laser light window or shine the laser beam
on a mirror, yourself or other people. Eye damage may
result.

– Do not put any flammable object or spray can near the

projector, hot air is exhausted from the ventilation holes.

– If the projector is not to be used for an extended time,

unplug the projector from the power outlet.

READ AND KEEP THIS OWNER'S MANUAL FOR LATER
USE.

SIDE and TOP REAR

20cm

50cm 50cm

50cm

4

Safety Instructions

All the safety and operating instructions should be read before
the product is operated.

Read all of the instructions given here and retain them for later
use. Unplug this projector from AC power supply before
cleaning. Do not use liquid or aerosol cleaners. Use a damp
cloth for cleaning.

Follow all warnings and instructions marked on the projector.

For added protection to the projector during a lightning storm,
or when it is left unattended and unused for long periods of
time, unplug it from the wall outlet. This will prevent damage
due to lightning and power line surges.

Do not expose this unit to rain or use near water... for
example, in a wet basement, near a swimming pool, etc...

Do not use attachments not recommended by the
manufacturer as they may cause hazards.

Do not place this projector on an unstable cart, stand, or table.
The projector may fall, causing serious injury to a child or
adult, and serious damage to the projector. Use only with a
cart or stand recommended by the manufacturer, or sold with
the projector. Wall or shelf mounting should follow the
manufacturer's instructions, and should use a mounting kit
approved by the manufacturers.

An appliance and cart combination should
be moved with care. Quick stops,
excessive force, and uneven surfaces
may cause the appliance and cart
combination to overturn.

Slots and openings in the back and bottom of the cabinet are
provided for ventilation, to insure reliable operation of the
equipment and to protect it from overheating.

The openings should never be covered with cloth or other
materials, and the bottom opening should not be blocked by
placing the projector on a bed, sofa, rug, or other similar
surface. This projector should never be placed near or over a
radiator or heat register.

This projector should not be placed in a built-in installation
such as a book case unless proper ventilation is provided.

Never push objects of any kind into this projector through
cabinet slots as they may touch dangerous voltage points or
short out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the projector.

Do not install the projector near the ventilation duct of air­conditioning equipment.

This projector should be operated only from the type of power
source indicated on the marking label. If you are not sure of
the type of power supplied, consult your authorized dealer or
local power company.

Do not overload wall outlets and extension cords as this can
result in fire or electric shock. Do not allow anything to rest
on the power cord. Do not locate this projector where the
cord may be damaged by persons walking on it.

Do not attempt to service this projector yourself as opening or
removing covers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified service
personnel.

Unplug this projector from wall outlet and refer servicing to
qualified service personnel under the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the projector.
c. If the projector has been exposed to rain or water.
d. If the projector does not operate normally by following the

operating instructions. Adjust only those controls that are
covered by the operating instructions as improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to
restore the projector to normal operation.

e. If the projector has been dropped or the cabinet has been

damaged.

f. When the projector exhibits a distinct change in

performance-this indicates a need for service.

When replacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer that have the same characteristics as the
original part. Unauthorized substitutions may result in fire,
electric shock, or injury to persons.

Upon completion of any service or repairs to this projector,
ask the service technician to perform routine safety checks to
determine that the projector is in safe operating condition.

Voor de klanten in Nederland

Bij dit product zijn batterijen
geleverd.
Wanneer deze leeg zijn,
moet u ze niet weggooien
maar inleveren als KCA.

5

Safety Instructions

CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR

● Do not drop or bump the projector, otherwise damages or malfunctions may result.

● When carrying the projector, use a suitable carrying case.

● Do not transport the projector by using a courier or transport service in an unsuitable transport case. This may cause

damage to the projector. To transport the projector through a courier or transport service, consult your dealer for best
way.

Moving the Projector

When moving the projector, replace the lens cover and retract the adjustable feet to prevent damage to the lens and
cabinet. When the projector is not in use for an extended period, put it into the carrying bag supplied with the projector.
The carrying bag is intended for protection from dust and scratches on the surface of a cabinet, and it is not designed to
protect the projector from external forces. Do not transport the projector through a courier or transport services with this
bag. The projector can be damaged. When handling the projector, do not drop, bump, subject it to strong forces or put
other things on the cabinet.

Installing the Projector in Proper Position

Install the projector properly. Improper installation may reduce the lamp lifetime and cause a fire hazard.

Do not tilt the projector more than
20 degrees above and below.

Do not point the projector up to
project an image.

Do not point the projector down
to project an image.

Do not put the projector on either
side to project an image.

NO UPWARDNO DOWNWARD

NO SIDEWAYS

Air Circulation

Openings in the cabinet are provided for ventilation and to ensure reliable operation of
the product and to protect it from overheating, and these openings must not be
blocked or covered.

CAUTION

Hot air is exhausted from the exhaust vent. When using or installing the projector,
the following precautions should be taken.

● Do not put any flammable objects near the vent.

● Keep the exhaust vent at least 3’(1m) away from any objects.

● Do not touch a peripheral part of the exhaust vent, especially screws and metallic

part. This area will become hot while the projector is being used.

● Do not put anything on the cabinet. The materials put on the cabinet will not only
get damaged but also cause fire hazard by heat.

Cooling fans are provided to cool down the projector. This projector monitors internal
temperature and control the running speed of the cooling fans.

Air Intake Vent

Air Intake VentExhaust Vent

(Hot air exhaust)

20˚

20˚

6

Compliance

AC Power Cord for the United Kingdom :

This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the
plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus

. If the fuse cover is detachable, never use the plug with the cover omitted. If a replacement fuse cover is required,
ensure it is of the same colour as that visible on the pin face of the plug (i.e. red or orange). Fuse covers are available from
the Parts Department indicated in your User Instructions.
If the plug supplied is not suitable for your socket outlet, it should be cut off and destroyed.
The end of the flexible cord should be suitably prepared and the correct plug fitted. (See Over)

WARNING : A PLUG WITH BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED IN A LIVE SOCKET
OUTLET.

The Wires in this mains lead are coloured in accordance with the following code:

Green-and-yellow ············ Earth
Blue ································· Neutral
Brown ······························ Live

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying
the terminals in your plug proceed as follows:
The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked by the letter E
or by the safety earth symbol or coloured green or green-and-yellow.
The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

WARNING : THIS APPARATUS MUST BE EARTHED.

The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.

AC Power Cord for the United States and Canada :

AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories
(UL) and certified by the Canadian Standard Association (CSA).
AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure that the plug
will fit into the power outlet. Do not try to defeat this safety feature. Should you be unable to
insert the plug into the outlet, contact your electrician.

THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE.

AC POWER CORD REQUIREMENT

Federal Communication Commission Notice

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures :

– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.

Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or

modifications should be made, you could be required to stop operation of the equipment.

Model Numbers : PLC-XU55, PLC-XU50, PLC-SU50
Trade Name : Sanyo
Responsible party : SANYO FISHER COMPANY
Address : 21605 Plummer Street, Chatsworth, California 91311

Telephone No. : [phone]

ASA

GROUND

7

NOTE ON THE POWER CORD

AC power cord must meet requirement of the country where you use a projector.
Confirm an AC plug type with the chart below and proper AC power cord must be used.
If supplied AC power cord does not match your AC outlet, contact your sales dealer.

Compliance

To power cord connec­tor on your projector.

Projector side AC outlet side

Ground

To the AC outlet.

(120 V AC)

For Continental Europe

For the U.S.A. and Canada

This projector uses nominal input voltages of 100-120 V or 200-240
V AC. This projector automatically selects the correct input
voltage. It is designed to work with single-phase power systems
having a grounded neutral conductor. To reduce risk of electrical
shock, do not plug into any other type of power system.
Consult your authorized dealer or service station if you are not sure
of the type of power being supplied.
Connect the projector with all peripheral equipment before turning
the projector on. (See page 17-18 for connection.)

CAUTION

For safety, unplug AC power cord when the projector is not in
use.
When this projector is connected to an outlet with AC power
cord, it is in Stand-by mode and consumes a little electric
power.

Connecting the AC Power Cord

Connect AC power cord (supplied) to the projector.
The AC outlet must be near this equipment and must
be easily accessible.

For the U.K.

To the AC outlet.

(200 - 240 V AC)

To the AC outlet.

(200 - 240 V AC)

8

Features and Design

This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. This
projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD)
technology.

◆ Compatibility

The projector widely accepts various video and
computer input signals including;

● Computers

IBM-compatible or Macintosh computer up to
1280 x 1024 resolution.

● 6 Color Systems

NTSC, PAL, SECAM, NTSC 4.43, PAL-M or PAL-N
color system can be connected.

● Component Video

Component video signal, such as a DVD player
output high definition TV signals including 480i,
480p, 575i, 575p, 720p, 1035i or 1080i, can be
connected.

● S-Video

S-Video signal, such as a S-VHS VCR output
signal, can be connected.

● RGB Scart

RGB Scart signal can be connected.

◆ Simple Computer System Setting

The projector has the Multi-scan system to conform to
almost all computer output signals quickly. (See page

25.)

◆ Compact Design

This projector is extremely compact in size and weight.
It is designed to be carried and work anywhere you wish
to use.

◆ Keystone Adjustment

Keystone distortion can be corrected not only vertically
but also horizontally. The keystone correction function
enables you to use the projector where you wish to use.
(See page 20 and 38.)

◆ Multilanguage Menu Display

Operation menu is available in; English, German, French,
Italian, Spanish, Portuguese, Dutch, Swedish, Russian,
Chinese, Korean, or Japanese. (See page 38.)

◆ Digital Zoom (for Computer)

The digital zoom function expands (to approx. 16 times
of screen size) or compress the image size, allowing you
to focus on crucial information at a presentation. (See
page 31.)

◆ Wireless Mouse

The remote control supplied with this projector has
wireless mouse function for a connected computer.
This function enables you to operate both the projector
and the connected computer with the remote control.
(See page 14.)

◆ Power Management

The Power management function reduces power
consumption and maintain the lamp life. (See page 39.)

◆ Digital Visual Interface

The projector is equipped with DVI 29-pin terminal for
connecting DVI output from a computer or video
equipment. You can also enjoy digital entertainment
content protected by HDCP technology. (See page 24
for HDCP.)

◆ Switchable Interface Terminal

The projector provides a switchable interface terminal.
You can use the terminal as computer input or monitor
output conveniently. (See page 39.)

◆ Pointer Function

The projector has a convenient function which displays
Spotlight or Pointer controlled by the remote control on a
projected image. The remote control also has the Laser
pointer function. These functions will make your
important presentation more effective. (See page 13,

40.)

◆ Interlace Progressive Conversion

High-quality picture is available with this technology
which converts interlace signal into progressive signal.
(See page 36.)

◆ User’s Logo

A projected image can be captured and used for the
starting display of the projector with the Capture
function. You can also display the captured image in an
interval during your presentation instead of blackout
image with the No show function. (See page 21, 38.)

◆ Multi Card Imager (optional)

The projector can be operated through wired/wireless
LAN by attaching the Multi Card Imager that is optionally
supplied. The Multi Card Imager is also used as a
viewer. Contact the dealer where you purchased the
projector for the Multi Card Imager.

◆ Lamp Mode

Brightness of the projection lamp can be changed by
setting. The projector has the function to adjust the
brightness according to an input signal for the best
suited image. (See page 40.)

9

Part Names and Functions

Bottom

Back

Front

q Power Cord Connector
w Infrared Remote Receiver
e Zoom Lever
r Focus Ring
t Projection Lens
y Lens Cover (See page 54 for attaching.)
u Air Intake Vent

q w e r t

q Exhaust Vent

q

w e r

q Lamp Cover
w Air Intake Vent (back and bottom)
e Air Filter
r Adjustable Feet

r

q ew

w Top Controls and Indicators
e Air Intake Vent
r Terminals and Connectors
t Speaker

CAUTION

Hot air is exhausted from the exhaust
vent. Do not put heat-sensitive
objects near this side.

y u

t

10

Part Names and Functions

A built-in micro processor which controls this unit may occasionally
malfunction and need to be reset. This can be done by pressing the
RESET button with a pen, which will shut down and restart the unit. Do
not use the RESET function excessively.

q COMPUTER IN 1 DVI-I

Connect computer output (Digital/Analog DVI-I type) or Multi

Card Imager (optional) to this terminal. (p17)

Terminal

q

w e

r

t y

u i o

i S-VIDEO

Connect the S-VIDEO output from video equipment to this jack.
(p18)

e AUDIO IN

Connect the audio output from video equipment connected to
r or i to this jack. (When the audio output is monaural,
connect it to L (MONO) jack.) (p17, 18)

y AUDIO IN COMPUTER / COMPONENT

Connect the audio output (stereo) from a computer or video
equipment connected to q or u to this jack. (p17, 18)

r

VIDEO

Connect the composite video output from video equipment to
VIDEO jack. (p18)

u COMPUTER IN 2 /COMPONENT IN / MONITOR OUT

This terminal is switchable and can be used as computer input ,
component input, RGB Scart 21-Pin Video input, or monitor
output. Set the terminal up as either Computer input or
Monitor output properly before using this terminal. An optional
cable is required when using this terminal as component input
or RGB Scart 21-Pin Video input. (p17, 18)
(This terminal outputs analog signal from COMPUTER IN 1 DVI-I
terminal only when using as Monitor out.)

o AUDIO OUT (VARIABLE)

Connect an external audio amplifier to this jack. (p17, 18)
This terminal outputs sound from AUDIO IN terminal (e or y).

t USB (Series B)

When operating the connected computer with the remote
control, connect USB port of your computer to this connector
with a USB cable. (p17)

w SERVICE PORT

This jack is used to service this projector.

*

*

Do not press this button. This button is used for optional
accessories.

COMPUTER IN 1

DVI - I

COMPUTER IN 2 /

MCI

COMPONENT IN /

MONITOR OUT

SERVICE PORT

RESET

AUDIO IN

R VIDEOL

(MONO)

S-VIDEO

USB

COMPUTER /
COMPONENT

AUDIO IN

AUDIO OUT

(VARIABLE)

11

Part Names and Functions

ON - OFF

POWER

KEYSTONE

INPUT

WARNING

LAMP

REPLACE

MENU

V

O

L

U

M

E

–

V

O

L

U

M

E

+

SELECT

This projector has control buttons and indicators on its top.

To p

q w e

r

t y

u i o

o LAMP REPLACE indicator

Turns yellow when the life of the projection lamp draws to an
end. (p43)

y WARNING indicator

Lights red when the projector detects abnormal condition. This
also flashes red when the internal temperature of the projector
exceeds the operating range. (p41)

e POWER ON–OFF button

Turns the projector on or off. (p19)

t

POWER indicator

Flashes red until the projector gets ready to be turned on. It
turns red when the projector is in the stand-by mode. It
remains green while the projector is under operation.

w INPUT button

Selects input source. (p24, 32 )

u MENU button

Opens or closes the On-Screen Menu. (p22)

i POINT (Up/Down/Left/Right ) button

Selects an item or adjusts value in the On-Screen Menu. These
are also used to pan the image in the Digital zoom +/– mode.
(p31)
Point Left/Right button are used as VOLUME +/– button. (p21)

r SELECT button

Executes the item selected. It is also used to expand /
compress the image in Digital zoom +/– mode. (p31)

q KEYSTONE button

Corrects keystone distortion. (p20, 38)

12

Part Names and Functions

Remote Control

q

w
e
r

t
y

u

i

o

!0
!1

!4

!5

!6
!7

!8

!9

@0

!2
!3

@1

@1 RESET/ON/ALL-OFF switch

When using the remote control, set this switch to “ON.” Set it to “ALL OFF” for
energy saving when it is not used. Slide this switch to the "RESET" to initialize the
remote control code. (p14)

w SIGNAL EMISSION indicator

This indicator lights red while the laser beam is being emitted from the laser light
window or a signal is being sent from the remote control to the projector.

e AUTO PC button

Operates the Auto PC adjustment function. (p26)

r D.ZOOM button

Selects the Digital zoom +/– mode and resize the image. (p31)

!7

MUTE button

Mutes sound. (p21)

i POINT (UP/DOWN/LEFT/RIGHT) button

Selects an item or adjusts value in the On-Screen Menu. These are also used to pan
the image in the Digital zoom +/- mode. (p31)
Point Left/Right button are also used as VOLUME +/- button. (p21)

!0 MENU button

Opens or closes the On-Screen Menu. (p22)

!3 LASER button

Operates the Laser pointer function. Laser beam is emitted while pressing this
button within 1 minute. When using this laser pointer for more than 1 minute,
release the LASER button and press it again. This button is also used as a
switching button to activate the Pointer function of the projector. (p13)

!4 POWER ON-OFF button

Turns the projector on or off. (p19)

!5 NO SHOW button

Turns the picture into black image. (p21)

t FREEZE button

Freezes the projected picture. (p20)

y IMAGE button

Selects image levels.(p29, 35)

!2 SELECT button

Executes the item selected, or to expand or compress image in the Digital zoom +/­mode. (p31)

!9 COMPUTER button

Selects input source (COMPUTER 1 or COMPUTER 2). (p24)

!6

P-TIMER button

Operates P-Timer function. (p21)

u PAGE UP/DOWN button

Turns pages; the Up button to the previous page and the Down button to the next
page for an image from a computer. Connect the projector and your computer with
a USB cable before use. (p17)

!8 R-CLICK button

Acts as right click for wireless mouse operation. (p14)

q L-CLICK button

Acts as left click for wireless mouse operation. (p14)

@0 VIDEO button

Selects input source (VIDEO). (p32)

!1 KEYSTONE button

Corrects keystone distortion. (p20, 38)

o PRESENTATION POINTER button

Move a pointer of the projector or a pointer for wireless mouse operation. (p13,

14)

13

Part Names and Functions

You can move Spotlight or Pointer of the projector with the remote control to emphasize a part of the projected image.
(See “Pointer” on page 40 for changing the patterns and sizes.)

While pressing the MENU button, hold down the NO SHOW
button for more than 7 seconds so that the Pointer function
can be available. (The Laser pointer function has switched to
the Pointer function.)

1

Spotlight

While pressing the MENU button, hold
down the NO SHOW button for more
than 7 seconds.

Press the LASER button on the remote control toward the
projector and see if the LASER button lights green, and
Spotlight or Pointer is displayed on the screen. Then you can
move Spotlight or Pointer with the PRESENTATION
POINTER button. If the LASER button does not light green
and still emits laser beam, the Laser pointer function has not
switched to the Pointer function yet. Try these steps until
the LASER button lights green.

2

Pointer Function

To clear Spotlight or Pointer displayed on the screen, press
the LASER button toward the projector and see if the LASER
button turns off.
To use the Laser pointer function once again, while pressing
the MENU button, hold down the NO SHOW button for
more than 7 seconds.

3

After the Laser pointer function has
switched to the Pointer function, the
LASER button is used as the Pointer
function ON-OFF switch instead of the
Laser pointer function.
Press the LASER button toward the
projector and see if it lights green.

Pointer

This remote control emits a laser beam as Laser pointer function from the laser light window. When the LASER button is
pressed, laser light goes on. When the LASER button is being pressed for more than 1 minute or the LASER button is
released, light goes off. The signal emission indicator lights red and laser is emitted with red light to indicate laser beam is
being emitted.
The laser emitted is a class II laser; therefore, do not look into the laser light window or shine the laser beam on yourself or
other people. The marks below are caution labels for laser beam.

CAUTION : Use of controls, adjustments or performance of procedures other than those specified herein may result in

hazardous radiation exposure. Do not look into the laser light window while laser is emitting, otherwise eye
damage may result.

Laser Light Window

These caution labels are put on the remote control.

Signal Emission Indicator

Laser Pointer Function

NO SHOW button

MENU button

LASER button

PRESENTATION POINTER button

PRESENTATION POINTER button

NOTE

● You can choose the size of Spotlight (Large, Middle, and Small) and the

pattern of Pointer (Arrow, Finger, and Dot) in the Setting Menu. See
“Pointer” on page 40.

14

Part Names and Functions

This projector has eight different remote control codes (Code 1-Code 8); the factory-set, initial code (Code 1) and the other
seven codes (Code 2 to Code 8). This switching function prevents remote control interference when operating several
projectors or video equipment at the same time. (Change the remote control code for the projector first before changing
that for the remote control. See “Remote control” on page 40.)

While pressing the MENU button, press the IMAGE button
number of times corresponding to each remote control code
number. Each time you press the IMAGE button, the code is
changed sequentially. (See the list below.)

1

To initialize the remote control code for the remote control,
slide the RESET/ON/ALL-OFF switch to the RESET, and then
to the ON. The initial code is Code 1.

2

Remote Control Code

While pressing the MENU button,
press the IMAGE button number of
times corresponding to the remote
control code for the projector.

Remote Control Code

Number of Times of

Pressing IMAGE Button

Code 1 1

Code 2 2

Code 3 3

Code 4 4

Code 5 5

Code 6 6

Code 7 7

Code 8 8

MENU button

IMAGE button

The remote control can be used as a wireless mouse for your computer. Before operating the wireless mouse, connect
your computer and the projector with the supplied USB cable. (See page 17 for connection.) When the Pointer function is
used, the wireless mouse is not available.

Wireless Mouse Operation

Move the pointer on the screen
with this button.

PRESENTATION POINTER button

R-CLICK button

L-CLICK button

Acts as right click while the
projector and a computer are
connected with a USB

cable.

Acts as left click while the
projector and a computer are
connected with a USB

cable.

15

Part Names and Functions

To insure safe operation, please observe the following precautions :

● Use (2) AA, UM3 or R06 type alkaline batteries.

● Replace two batteries at the same time.

● Do not use a new battery with a used battery.

● Avoid contact with water or liquid.

● Do not expose the remote control to moisture, or heat.

● Do not drop the remote control.

● If a battery has leaked on remote control, carefully wipe case clean and install new batteries.

● Risk of explosion if battery is replaced by an incorrect type.

● Dispose of used batteries according to the instructions.

Press the lid down­ward and slide it.

Remove the battery
compartment lid.

Slide the batteries into
the compartment.

Replace the compartment
lid.

Two AA size batteries

For correct polarity (+ and
–), be sure battery
terminals are in contact
with pins in compartment.

12 3

Point the remote control toward the projector (Infrared Remote Receiver) whenever pressing any button. Maximum
operating range for the remote control is about 16.4’ (5m) and 60° in front of the projector.

16.4’
(5 m)

60°

Remote Control Batteries Installation

Remote Control Operating Range

16

Installation

Projection angle can be adjusted up to 11.8 degrees with the adjustable feet.

Lift the front of the projector and pull the feet lock latches on
both sides of the projector.

1

Adjustable Feet

Feet Lock Latches

Release the feet lock latches to lock the adjustable feet and
rotate the adjustable feet to adjust the position and tilt.

2

To retract the adjustable feet, lift the front of the projector
and pull and undo the feet lock latches.
Keystone distortion of the projected image can be adjusted
by menu operation. (p20, 38)

3

CAUTION

Tilt the projector within the adjustable range in order not to shorten
the life of the lamp. Proper angle should be taken. See page 5.

Positioning the Projector

Adjustable Feet

25.3' (7.7m)

16.4' (5.0m)

12.5' (3.8m)

8.2' (2.5m)

Max. Zoom

Min. Zoom

A : B = 9 : 1

Screen Size
(W x H) mm

4 : 3 aspect ratio

Zoom (min)

40”

Zoom (max)

813 x 610

4.9' (1.5m)

3.3' (1.0m)

100”

2032 x 1524

12.8' (3.9m)

8.2' (2.5m)

150”

3048 x 2286

19.3' (5.9m)

12.5' (3.8m)

195”

3962 x 2972

25.3' (7.7m)

16.4' (5.0m)

300”

6096 x 4572

––-––

25.3' (7.7m)

(Inch Diagonal)

3.3' (1.0m)

NOTE

● The brightness in a room has a great influence on picture quality. It is

recommended to limit ambient lighting in order to provide the best
image.

● The values shown are approximate and may vary from the actual size.

This projector is designed to project on a flat projection surface and can be focused from 3.3’(1.0m) - 25.3’(7.7m). Refer to
the figure and the table below for the screen size and the distance between the projector and the screen.

(Center)

300”

150”

100”

97”

40”

64”

195”

127”

195”

A

B

17

Installation

Connecting to a Computer

IBM-compatible computer or Macintosh computer (VGA / SVGA / XGA / SXGA)

DVI-VGA Cable

Monitor Output

Desktop type Laptop type

Audio Speaker

(stereo)

Audio Amplifier

Audio Cable

(stereo)

✽

Audio Output

Audio Input

AUDIO OUT

COMPUTER/COMPONENT

AUDIO IN

Cables used for connection (✽ = These accessories are not supplied with this projector.)

Audio
Cable

✽

(stereo)

NOTE :

When connecting the cable, the power
cords of both the projector and the
external equipment should be
disconnected from AC outlet.

USB port

MAC Adapter ✽

Set slide switch­es according to
the chart below.

• VGA Cable (HDB 15 pin) ✽

• DVI-VGA Cable (HDB 15 pin)

• DVI-Digital Cable (for Single Link T.M.D.S.) ✽

• USB Cable

• MAC Adapter (When connecting to Macintosh computer)

✽

• Audio Cables ( Mini Plug (stereo) x 2) ✽

External Audio Equipment

Terminals

of the Projector

VGA
Cable

✽

Monitor Output

or

Monitor Input

USB

COMPUTER IN 2 /
COMPONENT IN/

MONITOR OUT

Set switches as shown in the table
below depending on RESOLUTION
MODE that you want to use before
you turn on projector and computer.

◆

MAC ADAPTER (Not supplied)

USB
Cable

COMPUTER IN 1 DVI-I

DVI Cable ✽

Monitor Output

COMPUTER IN 1 DVI-I

NOTE

● This terminal is switchable. Set the terminal
up as either Computer input or Monitor
output before using this terminal. (See Page

39.)

COMPUTER IN 1

MCI

AUDIO IN

DVI - I

COMPUTER IN 2 /
COMPONENT IN /

MONITOR OUT

R VIDEOL

SERVICE PORT

RESET

(MONO)

S-VIDEO

USB

COMPUTER /
COMPONENT

AUDIO IN

AUDIO OUT

(VARIABLE)

13" MODE (640 x 480)
16" MODE (832 x 624)
19" MODE (1024 x 768)

12

ON ON

OFF
OFF

ON ON

ON

OFF

34 56

OFF OFF OFF

OFF
OFF OFF OFF

ON
ON
ONON

ON

OFF OFF OFF

ON

ON

1

OFF OFFON ON21" MODE (1152 x 870)

2 3 4 5 6

DIP