Sanyo PLC-XP56,PLC-XP56L Service Manual

Multimedia Projector

SERVICE MANUAL (SUPPLEMENT)

PRODUCT CODE 1 122 275 00 (ME5A) 1 122 275 20 (ME5AL) 1 122 283 00 (PE5A) 1 122 283 20 (PE5AL) 1 122 283 02 (PE5C) 1 122 283 22 (PE5CL)

Original Version

REFERENCE NO. SS5110711-00

FILE NO.

Model No. PLC-XP56

PLC-XP56L

U.S.A., Canada, Europe, Asia, Africa

PLC-XP56

Note:

Model PLC-XP56L does not provide projection lens.

Chassis No. ME5-XP5600

ME5-XP56L00

NOTE: Match the Chassis No. on the unit’s

back cover with the Chassis No. in the Service Manual.

If the Original Version Service Manual Chassis No. does not match the unit’s, additional Service

Literature is required.You must refer to “Notices” to the Original Service Manual prior to servicing the unit.

FILE WITH ORIGINAL SERVICE MANUAL (SM5110500)

- NOTE -

Any information not contained in this manual will be found in the original model's service manual SM5110500-00 for models PLC-XP55 and PLC-XP55L.

■ Contents

■ Specifications ........................................................................................................3

■ Lamp Replacement ..............................................................................................4

■ Optical Parts Disassemblies ................................................................................5

● Polarized Glass-Out and Wide view Glass removal ..................................5

■ Electrical Adjustments ..........................................................................................6

● Fan Voltage adjustment ..............................................................................6

● Service Adjustment Data Table ..................................................................7

● Test Points and Locations ........................................................................19

■ Chassis Block Diagrams ....................................................................................20

■ Power Supply Lines ............................................................................................24

■ Control Port Functions ........................................................................................25

■ Service parts lists ........................................................................................ 27-67

● Electrical parts list .................................................................................. 27

● Mechanical parts list................................................................................ 62

● Optical parts list ...................................................................................... 64

Drawings & Diagrams................................................................................ A1-A17

■ Parts description and reading in schematic diagram ........................................ A2

■ Schematic diagrams .................................................................................. A3-A10

■ Printed wiring board diagrams ................................................................ A11-A16

■ Pins description of ICs, transistors, diodes .................................................... A17

- NOTE -

Any information not contained in this manual will be found in the original model's service manual SM5110500-00 for model PLC-XP5500, PLC-XP55L00.

MAJOR CHANGES as below:

- Optical parts

- Electrical parts of the lamp and the ballast unit

- Electrical circuits of the fan controls and the I/O expander

■ Specifications

● The specifications are subject to change without notice.

This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety standards against risk of fire, casualty and electrical hazards.

The CE Mark is a Directive conformity mark of the European Community (EC).

Owner’s Manual AC Power Cord Wireless/Wired Remote Control Transmitter and Batteries Remote Control Cable, VGA Cable, USB Cable, Control Cable for Serial port Protective Dust Cover Lens Cover (PLC-XP55/XP56) Lens Attachment (PLC-XP55L/XP56L)

Multi-media Projector

Accessories

1.3" TFT Active Matrix type, 3 panels

20.3 lbs (9.2 kg) PLC-XP55/XP56, 17.4 lbs (7.9 kg) PLC-XP55L/XP56L

12.6" x 6.6" x 18.5" (319 mm x 168 mm x 470 mm)

1024 x 768 dots

2,359,296 (1024 x 768 x 3 panels)

PAL, SECAM, NTSC, NTSC4.43, PAL-M and PAL-N

Up and Down

800 TV lines (HDTV)

INT. SP. Stereo (R and L), 2 watt RMS (T.H.D. 10%)

41 ˚F ~ 95 ˚F (5 ˚C ~ 35 ˚C)

14 ˚F ~ 140 ˚F (-10 ˚C ~ 60 ˚C)

Projector Type

Net Weight

Dimensions

(W x H x D)

Panel Resolution Number of Pixels Color System

Scanning Frequency

Horizontal Resolution

Built-in Speakers

Operating Temperature Storage Temperature

LCD Panel System

300 watt type

Projection Lamp

0˚ to 10.5˚

Feet Adjustment

Power Source : AA, UM3 or R06 Type x 2 Operating Range : 16.4’ (5m) / ±30˚ Dimensions : 2.0” x 1.4” x 7.6” (50mm x 36mm x 193mm) Net Weight : 0.35 lbs (160 g) (including batteries) Laser Pointer : Class II Laser

(Max. Output : 1mW / Wave length : 650±20nm)

Remote Control Transmitter

480i, 480p, 575i, 575p, 720p, 1035i and 1080i

High Definition TV Signal

AC 100 ~ 120 V (5.0 A Max. Ampere), 50 / 60 Hz

(The U.S.A and Canada)

AC 200 ~ 240 V (2.5 A Max. Ampere), 50 / 60 Hz

(Continental Europe and The U.K.)

Voltage and Power Consumption

H-sync. 15 ~ 100 KHz, V-sync. 50 ~ 100 Hz

Motorized Lens Shift

DVI Terminal (Digital) HDCP Compatible, HDB 15-pin Terminal (Analog) and Stereo Mini Type Jack (Audio)

Input 1/Monitor Output Jacks

BNC Type x 5 (G or VIDEO/Y, B or Cb/Pb, R or Cr/Pr, H and V), Stereo Mini Type Jack (Audio)

Input 2 Jacks

RCA Type x 3 (VIDEO/Y, Cb/Pb and Cr/Pr), RCA Type x 2 (Audio R and L) and DIN 4-pin (S-Video)

Input 3 Jacks

DIN 8-pin (Control port), USB port (Series B receptacle), Wired Remote Jack and PJ-Net Organizer Connector

Other Jacks

Adjustable from 31" to 400"

Projection Image Size (Diagonal)

F1.7 ~ 2.0 lens with f=48.2 mm ~ 62.6 mm Motor zoom and focus

Projection Lens

4.6' (1.4 m) ~ 48.3' (14.7 m)

Throw distance

-4-

WARNING:

- For continued safety, replace with a lamp assembly of the same type.

- Allow the projector to cool for at least 45 minutes before you open the lamp cover. The inside of the projector can become very hot.

- Do not drop the lamp module or touch the glass bulb! The glass can shatter and cause injury.

Procedure

1 Tu rn off the projector and disconnect the AC cord. Allow the projector to

cool for at least 45 minutes.

2 Loosen 2 screws with a screwdriver and open the lamp cover. 3 Loosen 2 screws and pull out the lamp assembly by grasping the handle. 4 Replace the lamp assembly securely and tighten 2 screws. 5 Close the lamp cover and tighten 2 screws. 6 Connect the AC cord to the projector and turn on.

Note:

- Do not reset the Lamp Replace Counter, except after lamp is replaced.

- The projector can not be turned-on with lamp cover removed, because when the lamp cover is removed, the interlock switch is also released to switch off the mains power for safety.

7 Reset the Lamp Replace Counter, see below explanation.

■ Lamp Replacement

1 Tu rn the projector on, and press the MENU button

and the on-screen menu will appear. Press the POINT LEFT/RIGHT buttons to move a red frame pointer to

SETTING menu icon.

2 Press the POINT DOWN button to move a red frame

pointer to “Lamp counter reset” and then press the SELECT button.The message “Lamp replace counter reset?” is displayed. Move the pointer to [Yes] and the press the SELECT button.

3 Another confirmation dialog box appears and select

[Yes] to reset Lamp Replace Counter .

Please refer to the owners manual for further information.

Recommendation

Should the air filter become clogged with dust particles, it will reduce the cooling fan’s effectiveness and may result in internal heat build up and short lamp life. We recommend cleaning the air filter after the projection lamp is replaced. Refer to “Air Filter Cleaning”.

The LAMP REPLACEMENT indicator will illuminate when the Lamp Replace Counter reaches 1500 hours. This is to indicate that lamp replacement is required.

You can check the lamp replace counter following to below procedure.

1 Press and hold the POWER button on the projector or

the remote control unit for more than 20 seconds.

2 The Lamp replace Counter service menu appears

on the center of the screen briefly.

Remark : The upper display "Projector Counter" is not reset by resetting Lamp Replace Counter.

Lamp cover

Lamp replace counter data

ORDER REPLACEMENT LAMP

ype No.

Service Parts No.

POA-LMP81 610 314 9127

How to reset Lamp Replace Counter

How to check Lamp Replace Counter

Screws

Handle

Lamp Assembly

❈ The lamp is changed:

Note: Do not replace the LCD panel separately otherwise it can not obtain proper picture.

-5-

KEY No.

DESCRIPTION 1 PRISM ASSEMBLY 2 POLARIZED GLASS OUT 3

PRE-POLARIZED GLASS OUT(*2) 4 WIDE VIEW GLASS 5 LCD PANEL

(*2) PRE-POLARIZED GLASS

The printed marker comes top side, and the glass should be placed the sheet attached side comes as shown in Fig.4-3.

Fig.4-3

* Following assemblies differ from previous assemblies for chassis No. MR3-XP5500, others are the same;

- The direction of the phase sheet on the pre-polarized glass has been changed.

1 Remove 4 hex screws A and take the LCD/Prism ass’y off upward. 2 Remove 3 screws B and take the Glass Holder, and then pull the polarized

Glass-Out and the wide view glass upwards off.These glasses are mount-

ed for R, G and B LCD panels respectively. Note: To avoid the CG and focus alignments slipping off, please be careful to handle the LCD/Prism ass'y.

LCD Panel/Prism Ass’y

Fig.4-

Polarized Glass-Out and Wide view Glass removal

*2 Glasses should be placed as the

sheet attached side comes as shown in Fig.4-3.

Fig.4-

Pre-Polarized Glass-Out (*1)

Phase Sheet

Wide view Glass

Phase Sheet

Polarized GlassOut

*1 Pre-polarized Glass-

Out should be placed into the Green and Blue LCD panels.

Phase Sheet (*1)

■ Optical Parts Disassemblies

LCD Panel/Prism Assembly

1245

(RED)

LCD PANEL

2345

LCD PANEL

(GREEN)

TOP VIEW

3245

Phase Sheet (*2)

(BLUE)

LCD PANEL

-6-

1. Enter the service mode.

2. Connect a digital multimeter to test point “TPFN❊”(+)

and chassis ground (-). (as shown below)

3. Select group no. “11”, item no. “24” and change data

value of the fan number. (as shown below)

4. Select item no.“41” and change data value to adjust the fan max. output voltage to be 14.0 ±0.1V.

5. Select item no.“42” and change data value to adjust the fan min. output voltage to be 6.5 ±0.1V.

6. Each fan should be adjusted refer to item 2 - 5.

Note: The location of each fan is refer to the parts list.

c Fan Voltage adjustment

FAN No. Group/Item

FN901 11 / 24 FN902 11 / 24 FN903 11 / 24 FN904 11 / 24 FN905 11 / 24 FN906 11 / 24 FN907 11 / 24

Data Test point

0 TPFN1 0 TPFN1 2 TPFN3 5 TPFN4 1 TPFN5 4 TPFN6 3 TPFN7

* Following information differs from the previous chassis No. MR3-XP5500, others are the same;

- The fan voltage adjustment has been changed.

❈ Different items as below:

■ Electrical Adjustments

-7-

Electrical Adjustments

Group: 0 TA1370

0 SEP_LEV 3 / 3 / 3 0 ~ 3 YCbCr-1080i,1035i,720p / RGB-1080i,1035i,720p / others

1 YCLP_PHS 0 / 1 / 1 0 or 1 YCbCr-1080i,1035i,720p / RGB-1080i,1035i,720p / others

2 HD_PHASE 37 / 40 / 36 / 37 / 40 / 0 ~ 63 YCbCr-1080i,1035i / 720p / 1080i_50 / RGB-1080i / RGB-720p /

36 / 37 / 37 / 32 RGB-1080i_50 / 575p / 480p / others

3 V_FREQ - - Read only

4H_FREQ - -

5 HD_IN - -

Group: 1 uPD64083

0 NRMD 0 0 ~ 3

1 HDP 4 0 ~ 7

2 CDL 4 0 ~ 7

3DYCOR 4 0 ~ 15 DY detect coring level (Y movement detect coring)

4DYGAIN 15 0 ~ 15 DY detect gain (Y movement detect gain)

5 DCCOR 2 0 ~ 15 DC detect coring level (C movement detect coring)

6 DCGAIN 13 0 ~ 15 DC detect gain (C movement detect gain)

7VAPGAIN 3 0 ~ 15

8VAPINV 2 0 ~ 15

9 YPFT 3 0 ~ 3

10 YPFG 12 0 ~ 15

11 V1PSEL 3 0 ~ 3

12 VEGSEL 3 0 ~ 3

13 CC3N 0 0 or 1

14 SELD2FH 1 0 or 1

15 SELD1FL 1 0 or 1

16 YHCOR 0 0 ~ 3

17 HPLLFG 1 0 or 1

18 PLLFS 1 0 or 1

19 KILR 3 0 ~ 15

20 HSSL 12 0 ~ 15

21 VSSL 3 0 ~ 15

22 BGPS 7 0 ~ 15

23 BGPW 3 0 ~ 15

Group: 2 TB1274AF

0 TINT 32 0 ~ 63

1 SHP_EQ 2 0 ~ 3

2 SHP_FO 2 0 ~ 3

3 SHP_GAIN 11 / 11 / 8 / 6 0 ~ 15 Video NT / PAL,PALM,PALN / SECAM,BW60,BW50 / NT443 /

6 / 9 / 8 / 8 PAL60 / S-Video / YCbCr / Scart

4 Y_OUT_LEVEL 33 / 31 / 32 / 32 / 35 / 0 ~ 63 Video NT / NT443 / PAL,PALM,PALN / PAL60 / SECAM,BW /

0.7V 31 / 31 / 32 / 32 S-Video NT,BW / NT443 / PAL,PALM,PALN / PAL60

32 / 35 / 38 SECAM / YCbCr / Scart

5 C_OUT_LEVEL 25 / 24 / 31 / 25 / 41 / 0 ~ 63 Video NT / NT443 / PAL,PALM,PALN / PAL60 / SECAM,BW /

0.6V 26 / 26 / 32 / 25 / S-Video NT,BW / NT443 / PAL,PALM,PALN / PAL60

42 / 35 / 35 / 35 SECAM / 480i / 575i / Scart

6 Y_DELAY 5 / 5 / 4 / 4 / 4 / 0 ~ 15 Video NT,BW60 / PAL,PALM,PALN,BW50 / SECAM / NT443 / PAL60

4 / 4 / 3 / 3 / 4 S-Video NT,BW60 / PAL,PALM,PALN,BW50 / SECAM / NT443 / PAL60

7 COL_SYS - - Read Only

8X’TAL - -

9 NOISE_DET - -

10 V_FREQ - -

11 Vert. Std - -

12 CID - -

13 V_SIG - -

14 MVM 0 0 or 1

15 AFC_GAIN 1 0 ~ 3

16 SECAM_GP, SECAM_ID 7 0 ~ 15

17 LPF 1 / 1 0 or 1 Not-Scart / Scart

Group: 3 CXA2151

0MATOUT 0 / 0 / 0 / 2 / 1 0 ~ 3 RGB / YCbCr 480i&575i / YCbCr 480p&575p / YCbCr 1080i&720p / YCbCr 1035i

1 V_TC 0 / 0 / 0 / 0 / 0 ~ 3 RGB-480i,575i / 480p,575p / 720p,1080i / 1035i

0 / 0 / 0 / 0 YCbCr-480i,575i / 480p,575p / 720p,1080i / 1035i

2 HSEP_SEL 0 / 0 / 0 / 0 / 0 or 1 RGB-480i,575i / 480p,575p / 720p,1080i / 1035i

0 / 0 / 0 / 0 YCbCr-480i,575i / 480p,575p / 720p,1080i / 1035i

3 HD_TC 0 / 0 / 0 / 0 / 0 or 1 RGB-480i,575i / 480p,575p / 720p,1080i / 1035i

0 / 0 / 0 / 0 YCbCr-480i,575i / 480p,575p / 720p,1080i / 1035i

No. Adjustment Item Initial Value Range Input source / Description

● Service Adjustment Data Table

These initial values are the reference data written from the CPU ROM to memory IC when replaced new memory IC. The adjustment items indicated with “✻” are required to readjust following to the “Electrical adjustments”. Other items should be used with the initial data value.

4 HS_MASK 0 / 0 / 0 / 0 / 0 or 1 RGB-480i,575i / 480p,575p / 720p,1080i / 1035i

0 / 0 / 0 / 0 YCbCr-480i,575i / 480p,575p / 720p,1080i / 1035i

5MACRO 1 / 1 / 0 / 0 or 1 RGB-480i,575i / 480p,575p / 720p,1035i,1080i

1 / 1 / 0 YCbCr-480i,575i / 480p,575p / 720p,1035i,1080i

6 CB_GAIN 6 / 6 / 6 / 6 / 6 0 ~ 15 RGB / YCbCr-480i,575i / YCbCr-480p,575p / YCbCr-1080i,720p / YCbCr-1035i

7 CR_GAIN 6 / 6 / 6 / 6 / 6 0 ~ 15 RGB / YCbCr-480i,575i / YCbCr-480p,575p / YCbCr-1080i,720p / YCbCr-1035i

8 Y_GAIN 6 / 6 / 6 / 6 / 6 0 ~ 15 RGB / YCbCr-480i,575i / YCbCr-480p,575p / YCbCr-1080i,720p / YCbCr-1035i

9 GAIN_SEL 1 / 1 0 ~ 3 without RGB Video / RGB Video

Group: 4 PANEL (CXD3531R, CXA7004R)

0 G_SUB_GAIN 67 / 67 / 62 / 67 0 ~ 255 PC / AV / DVI / HD White 100% Adjustment ✻ Gain adjustment [G]

1 B_SUB_GAIN 67 / 67 / 62 / 67 0 ~ 255 ✻ Gain adjustment [B]

2R_SUB_GAIN 67 / 67 / 62 / 67 0 ~ 255 ✻ Gain adjustment [R]

3 G_SUB_BRT 0 / 0 -4096 ~ 4095 PC / DVI,AV

4 B_SUB_BRT 0 / 0 -4096 ~ 4095

5 R_SUB_BRT 0 / 0 -4096 ~ 4095

6 G_SIG_CNTR 33 0 ~ 255 Panel Center Adjustment ✻ Signal center adjustment [G]

7B_SIG_CNTR 33 0 ~ 255 ✻ Signal center adjustment [B]

8 R_SIG_CNTR 33 0 ~ 255 ✻ Signal center adjustment [R]

9 G_GAIN_CTRL 160 0 ~ 255 ✻ Gamma gain adjustment [G]

10 B_GAIN_CTRL 160 0 ~ 255 ✻ Gamma gain adjustment [B]

11 R_GAIN_CTRL 160 0 ~ 255 ✻ Gamma gain adjustment [R]

12 G_BRT_CTRL 117 / 117 0 ~ 255 PC(A,D) / AV,RGB-VIDEO ✻ Black level adjustment [G]

13 R_BRT_CTRL 72 / 72 0 ~ 255 PC(A,D) / AV,RGB-VIDEO ✻ White balance adjustment [R]

14 B_BRT_CTRL 138 / 138 0 ~ 255 PC(A,D) / AV,RGB-VIDEO ✻ White balance adjustment [B]

15 G_VCOM_CTRL 100 0 ~ 255 ✻ Common center adjustment [G]

16 B_VCOM_CTRL 100 0 ~ 255 ✻ Common center adjustment [B]

17 R_VCOM_CTRL 100 0 ~ 255 ✻ Common center adjustment [R]

18 G_PSIGA 21 0 ~ 255 ✻ Psig adjustment [G]

19 B_PSIGA 21 0 ~ 255

20 R_PSIGA 21 0 ~ 255 ✻ Psig adjustment [R,B]

21 G_PSIGB 212 0 ~ 255 ✻ Psig adjustment [G]

22 B_PSIGB 212 0 ~ 255

23 R_PSIGB 212 0 ~ 255 ✻ Psig adjustment [R,B]

24 Cinema G_BRT_CTRL 1 / 0 -128 ~ 127 PC(A,D) / AV,RGB-VIDEO

25 Cinema R_BRT_CTRL -2 / 0 -128 ~ 127 PC(A,D) / AV,RGB-VIDEO

26 Cinema B_BRT_CTRL 1 / 0 -128 ~ 127

27 SHP 23 0 ~ 63

28 GC_ON 0 0 ~ 1

29 G_GC_ATT 0 0 ~ 255

30 B_GC_ATT 0 0 ~ 255

31 R_GC_ATT 0 0 ~ 255

Group: 5 DAC

0 G_VIDEO_CENTER 120 0 ~ 255 dac1

1 B_VIDEO_CENTER 120 0 ~ 255 dac1

2R_VIDEO_CENTER 120 0 ~ 255 dac1

3 REF_G 60 0 ~ 255 dac1

4 REF_B 60 0 ~ 255 dac1

5 REF_R 60 0 ~ 255 dac1

6 NRSB 160 0 ~ 255

7 NRSA 40 0 ~ 255

8 G_V_COM 55 0 ~ 255 dac2

9 B_V_COM 55 0 ~ 255 dac2

10 R_V_COM 55 0 ~ 255 dac2

11 G_CLMP 125 / 208 / 208 / 208 0 ~ 255 PC(not RGB Video) / RGB Video / Video / Component ✻ Y/G pedestal adjustment

12 B_CLMP 181 / 158 / 224 / 224 0 ~ 255 PC(not RGB Video) / RGB Video / Video / Component ✻ Cb/B pedestal adjustment

13 R_CLMP 184 / 158 / 224 / 224 0 ~ 255 PC(not RGB Video) / RGB Video / Video / Component ✻ Cr/R pedestal adjustment

14 SGAIN + - 0 ~ 255

15 SGAIN - 128 0 ~ 255

16 LF_LEV 255 / 255 / 255 / 0 / 0 0 ~ 255 SCART / RGB-480i,575i / YCbCr-480i,575i / VIDEO,S-VIDEO / Others

17 DAC_VRB 34 0 ~ 255 ✻ A/D reference voltage bottom adjustment

18 DAC_GY 112 / 112 / 112 0 ~ 255 Composite / Component / RGB Video ✻ A/D reference voltage top adjustment

19 DAC_BCB 113 / 113 / 113 0 ~ 255 Composite / Component / RGB Video

20 DAC_RCR 113 / 113 / 113 0 ~ 255 Composite / Component / RGB Video

Group: 6 TC90A69F

0Y-EQ_GAIN 3 0 ~ 3

1Y-EQ_N_C_LIM 3 0 ~ 3

2V-ENH_GAIN 4 0 ~ 7

3 V_ENH_CORING 2 0 ~ 3

4 NTSC443_SW 1 0 ~ 1 0 : NTSC4.43 1 : PAL60 (Available for NTSC4.43)

Group: 10 Option

0 Lamp Time Monitor - 0 ~ 8738 Read only

1 RS232C Baudrate 0 0 ~ 1 0: 19200bps 1: 9600bps

No. Adjustment Item Initial Value Range Input source / Description

Electrical Adjustments

-8-

-9-

Electrical Adjustments

2 Shootout Mode 0 0 ~ 1 0: Disable 1: Enable

3 Cooling Time 3 0 ~ 15 Set cooling period, 1: 30 sec. 3: 90 sec. 15: 450 sec. 0: continuos

4Hi-Land SW 0 0 ~ 1 0: Normal 1: Highland mode (Fan spin speed max.)

5V-Douki SW 0 0 ~ 1 0: Synchronized Vertical 1: non-synchronized Vertical

6 Lamp Total Time - 0 ~ 65535 Read only

7 Net Board RESET 1 0 ~ 1 0: Disable 1: Enable

8Keystone Option 0 0 ~ 1 0: Maximum correction (fix) 1: Changeable for Input signal

9 Syukka SW 0 0 ~ 10 Set 10 to Shipping Condition

10 Color Shading SW 1 0 ~ 1 0: OFF 1: ON

11 RC Enable/Disable 0 0 ~ 3 0: Both enable 1: Front Disable 2: Rear Disable 3: Both Disable

12 Lamp Dim Level 15 0 ~ 15 0: the darkest 1: the brightest

13 Lamp Warning Time 1500 0 ~ 65535 Unit = hour

14 Forced NOBRAND 0 0 ~ 1 0: Normal 1: No brand

15 Forced Video Mute Off 0 0 ~ 1 0: Video Mute ON 1: Video Mute OFF

16 ANZEN FAN Control Fix SW 0 0 ~ 4 0: Normal 1: Normal min. 2: Normal max 3: Eco min. 4: Eco max

17 DJTR_SW - - Not used

18 HDCP Option 0 0 ~ 3 0: XGA 1: Not XGA

19 HDCP Reset 0 0 ~ 10 Set 10 and write EDID Data for HDCP

20 Auto PC Adj. 0 0 ~ 1 0: Auto PC adj available, 1: Auto PC adj. not available

Group: 11 FAN (Fan Control)

0FAN_TEMP_A_WARNING 460 30 ~ 1000 Temperature to judge abnormal A (Not memorized) Inside projector

1FAN_TEMP_B_WARNING 800 30 ~ 1000 Temperature to judge abnormal A (Not memorized) Lamp

2FAN_TEMP_C_WARNING 510 30 ~ 1000 Temperature to judge abnormal A (Not memorized) LCD Panel

3FAN_TEMP_B-A_WARNING 520 0 ~ 1000

4FAN_TEMP_C-A_WARNING 200 0 ~ 1000

5FAN_CONTROL_SW 0 0 or 1 0: Auto-control all Fans 1: Manual control all Fans

6FAN1 Manual Out 1350 0 ~ 2000 These are effective when FAN_CONTROL_SW is set to "1".

7FAN2 Manual Out 1350 0 ~ 2000

8FAN4 Manual Out 1350 0 ~ 2000

9FAN5 Manual Out 1350 0 ~ 2000

10 FAN6 Manual Out 1350 0 ~ 2000

11 FAN7 Manual Out 1350 0 ~ 2000

12 FAN1 Now Out - Read only Reading voltage of each Fan

13 FAN2 Now Out -

14 FAN4 Now Out -

15 FAN5 Now Out -

16 FAN6 Now Out -

17 FAN7 Now Out -

18 Temp Monitor A - - Read only

19 Temp Monitor B - -

20 Temp Monitor C - -

21 Pressure Monitor - - Read only

22 FAN_BALLAST_SW 0 0 or 1 Fan control depend on Ballast Output Voltage 0: OFF 1: ON

23 Ser vice Target MODE -1 -1 ~ 3 -1: Current Mode 0: Normal Mode 1: Eco Mode

24 Ser vice Target FAN 0 0 ~ 5 Service taget 0: FAN1 1: FAN2 2: FAN4 3: FAN5 4: FAN6 5: FAN7 ✻ Fan adjustment [Setting]

25 Control Switch 0 Control Switch for the operated Fan 0: Auto 1: Manual

26 Temp Source Range High 400 Control range of Temperature for Temperature Sensor A

27 Temp Source Range Low 330

28 Temp Fan-Out Range High 1350 / 1000 Control range of Fan control voltage by Temperature Sensor A

29 Temp Fan-Out Range Low 780 / 700 / 1000

30 Diff (UP)Src Range High 180 Difference of temperature between temp-A and temp-C for Fan additional voltage (upward)

31 Diff (UP)Src Range Low 150

32 Diff(DWN)Src Range High 80 Difference of temperature between temp-A and temp-C for Fan additional voltage (downward)

33 Diff(DWN)Src Range Low 60

34 Press Source Range Low Control range of Pressure Sensor

35 Press Source Range High

36 Press FanAdd Range High 0 Control range of Fan additional voltage by Pressure sensor

37 Press FanAdd Range Low 500

38 Ceil-Add Fan additional voltage when ceiling

39 Fan Out Limit Volt MAX 1400 Limit voltage of current Fan output voltage

40 Fan Out Limit Volt MIN. 650

41 Fan Out Limit DAC MAX 0 ~ 255 Limit of DAC output for current Fan ✻ Fan a djustment [max.]

42 Fan Out Limit DAC MIN. 0 ~ 255 ✻ Fan adjustment [min.]

43 Manual Out 0 ~ 2000 Output voltage of current Fan at manual mode

44 Now Out - Reading voltage of current Fan

Group: 12 PC Real / AV Cinema

0 PC Real Contrast 32 0 ~ 63

1 PC Real Brightness 32 0 ~ 63

2 PC Real Color 32 0 ~ 63

3 PC Real Tint 32 0 ~ 63

4 PC Real Red 32 0 ~ 63

5 PC Real Green 30 0 ~ 63

No. Adjustment Item Initial Value Range Input source / Description

6PC Real Blue 29 0 ~ 63

7 PC Real Shar pness 0 0 ~ 31

8 PC Real Gamma 8 0 ~ 15

9 PC Real N.R. 1 0 ~ 2

10 PC Real PROGRESSIVE 1 0 or 1

11 AV Cinema Contrast 32 0 ~ 63

12 AV Cinema Brightness 32 0 ~ 63

13 AV Cinema Color 32 0 ~ 63

14 AV Cinema Tint 32 0 ~ 63

15 AV Cinema Red 32 0 ~ 63

16 AV Cinema Green 30 0 ~ 63

17 AV Cinema Blue 29 0 ~ 63

18 AV Cinema Sharpness 15 0 ~ 31

19 AV Cinema Gamma 8 0 ~ 15

20 AV Cinema N.R. 1 0 ~ 2

21 AV Cinema PROGRESSIVE 1 0 or 1

Group: 20 IP_Converter

0IMAGE_IN_FUNC_POL 0/0/0/0/0/ 0/0/0/0/0 0 or 1 000-b4 (reg 0) NTSC / PAL / 480p / 575p / 1035i / 1080i / 1080i50 / 720p / 480i / 575i

1IMAGE_IN_HD_SEL 1/1/1/1/1/ 1/1/1/1/1 0 or 1 000-b3

2IMAGE_IN_HD_POL 1/1/1/1/1/ 1/1/1/1/1 0 or 1 000-b2

3IMAGE_IN_VD_POL 1/1/1/1/1/ 1/1/1/1/1 0 or 1 000-b1

4IMAGE_IN_LPF_SEL 0/0/0/0/0/ 0/0/0/0/0 0 or 1 000-b0

5IMAGE_OUT_CLK_POL 0/0/0/0/0/ 0/0/0/0/0 0 or 1 001-b5

6IMAGE_OUT_HD_POL 0/0/0/0/0/ 0/0/0/0/0 0 or 1 001-b4

7IMAGE_OUT_VD_POL 0/0/0/0/0/ 0/0/0/0/0 0 or 1 001-b3

8IMAGE_OUT_CS_SEL 0/0/0/0/0/ 0/0/0/0/0 0 or 1 001-b2

9IMAGE_OUT_DEMUX 1/1/1/1/1/ 1/1/1/1/1 0 or 1 001-b1

10 IMAGE_OUT_THROUGH 0/0/1/1/0/ 0/0/1/0/0 0 or 1 001-b0

11 IMAGE_IN_TOTAL_H Same as G510 - G517 0 ~ 2047 002 / 003 Same as G510 - G517 Read only

12 IMAGE_IN_START_H 190/ 200/ 171/ 196/ 124/ 0 ~ 2047 004 / 005

124/ 113/ 219/ 190/ 205

13 IMAGE_IN_SIZE_H 9/10/9/9/8/ 8/10/10/9/10 0 ~ 15 006 Read only

14 IMAGE_IN_START_V, 10 / 15 / 32 / 26 / 13/ 0 ~ 1023 007 / 008

10 / 10 / 20 / 10 / 16

15 IMAGE_IN_SIZE_V, 250 / 295 / 490 / 0 ~ 1023 009 / 010

545 / 545 / 545 / 545/

725 / 250 / 296

16 CLAMP_H, 100 / 130 / 100 / 110 / 0 ~ 2047 011 / 012 NTSC / PAL / Comp480p / Comp575p /

45 / 45 / 88 / 115 / Comp1035i / Comp1080i,1080i50 / Comp720p / Comp480i /

130 / 100 / 110 / 45 / Comp575i / RGB480p / RGB575p / RGB1035i /

45 / 88 / 115 / 130 RGB1080i,1080i50 / RGB720p / RGB480i / RGB575i

17 CLAMP_L, 140 / 160 / 130 / 145 / 0 ~ 2047 013 / 014

70 / 70 / 142 / 145 /

160 / 130 / 145 / 70 /

70 / 142 / 145 / 160

18 IMAGE_OUT_DELAY_H, 0 ~ 2047 015 / 016 (reg 2) NTSC / PAL / 480p /

-Read only 575p / 1035i / 1080i,1080i50 /

19 SYNC_OUT_DELAY_H, 0 ~ 2047 017 / 018 720p / 480i / 575i

-Read only

20 SYNC_OUT_DELAY_V, - 0 ~ 2047 019 / 020

Read only

21 IMAGE_OUT_START_H, 0 Set 0 021 / 022

22 IMAGE_OUT_END_H, 2047 Set 2047 023 / 024

23 IMAGE_OUT_START_V, 0/ 0/ 0/ 0/ 0/ 0/ 0/ 0/ 0 0 ~ 2047 025 / 026 + F440

24 IMAGE_OUT_END_V, 517/ 618/ 1038/ 1250/ 0 ~ 2047 027 / 028

1119/1119/1490/517/618

25 G_Y_IN_OS, 0 / 0 0 ~ 255 029 (reg 3) Not_RGB / RGB

26 B_CB_IN_OS, 128 / 0 0 ~ 255 030

27 R_CR_IN_OS, 128 / 0 0 ~ 255 031

28 G2Y, 256 / 150 0 ~ 1023 032 / 033 (reg 4) Not_RGB / RGB

29 B2Y, 0 / 29 0 ~ 1023 034 / 035

30 R2Y, 0 / 77 0 ~ 1023 036 / 037

31 G2CB, 0 / 939 0 ~ 1023 038 / 039

32 B2CB, 256 / 128 0 ~ 1023 040 / 041

33 R2CB, 0 / 983 0 ~ 1023 042 / 043

34 G2CR, 0 / 917 0 ~ 1023 044 / 045

35 B2CR, 0 / 1003 0 ~ 1023 046 / 047

36 R2CR, 256 / 128 0 ~ 1023 048 / 049

37 HUE_M, 37 / 35 0 ~ 255 050

38 GAIN_M, 0 / 0 0 ~ 127 051

39 DG_M_R, 0 / 0 0 ~ 63 052 (reg 4) Not_RGB / RGB

40 HUE_R, 77 / 73 0 ~ 255 053

No. Adjustment Item Initial Value Range Input source / Description

Electrical Adjustments

-10-

-11-

Electrical Adjustments

41 GAIN_R, 0 / 0 0 ~ 127 054

42 DG_R_Y, 0 / 0 0 ~ 63 055

43 HUE_Y, 121 / 124 0 ~ 255 056

44 GAIN_Y, 0 / 0 0 ~ 127 057

45 DG_Y_G, 0 / 0 0 ~ 63 058

46 HUE_G, 165 / 163 0 ~ 255 059

47 GAIN_G, 0 / 0 0 ~ 127 060

48 DG_G_C, 0 / 0 0 ~ 63 061

49 HUE_C, 205 / 201 0 ~ 255 062

50 GAIN_C, 0 / 0 0 ~ 127 063

51 DG_C_B, 0 / 0 0 ~ 63 064

52 HUE_B, 249 / 252 0 ~ 255 065

53 GAIN_B, 0 / 0 0 ~ 127 066

54 DG_B_M, 0 / 0 0 ~ 63 067

55 DNR_Y_NOISE_TH, 8 / 8 0 ~ 255 068 (reg 5) DNR-OFF / DNR-ON

56 DNR_Y_SENSE, 0 / 6 0 ~ 15 069

57 DNR_Y_MOTION_TH, 0 / 0 0 ~ 255 070

58 DNR_Y_MOTION_SLOPE, 4 / 4 0 ~ 7 071

59 DNR_Y_MOTION_F2_F0, 0 / 0 0 ~ 3 072

60 DNR_Y_MOTION_F4_F2, 3 / 3 0 ~ 3 073

61 DNR_C_NOISE_TH, 8 / 8 0 ~ 255 074

62 DNR_C_SENSE, 0 / 8 0 ~ 255 075

63 DNR_C_MOTION_TH, 0 / 0 0 ~ 255 076

64 DNR_C_MOTION_SLOPE, 4 / 4 0 ~ 7 077

65 DNR_C_MOTION_F2_F0, 0 / 0 0 ~ 3 078

66 DNR_C_MOTION_F4_F2, 3 / 3 0 ~ 3 079

67 IP_DEBUG, 0 / 0 / 0 0 ~ 7 080 (reg 6) IP-ON=NTSC,PAL,1035i,1080i,1080i50 /

68 IP_CTL_Y, 0 / 1 / 1 0 or 1 081-1 IP-ON&OFF=720p,480p,575p /

69 IP_CTL_C, 1 / 1 / 1 0 or 1 081-0 IP-OFF=NTSC,PAL,1035i,1080i,1080i50

70 IP_DIR, 10 / 0 / 0 0 ~ 15 082 (reg 7) IP-ON=NTSC,PAL /

71 IP_VAR_GAI, 8 / 0 / 0 0 ~ 15 083 IP-ON=1035i,1080i,1080i50 / IP-ON&OFF=720p,480p,575p /

72 IP_BPF_CORR, 4 / 0 / 0 0 ~ 255 084 IP-OFF=NTSC,PAL,1035i,1080i,1080i50

73 IP_BPF_GAIN, 32 / 0 / 0 0 ~ 63 085

74 IP_REL_H_GAIN, 63 / 0 / 0 0 ~ 63 086

75 IP_REL_V_GAIN, 63 / 0 / 0 0 ~ 63 087

76 MOTION_LPF_SEL, 7/ 7/ 7/ 7/ 7/ 7/ 7/ 7 0 ~ 7 088 (reg 8) DNR-ON=NTSC,PAL / DNR-OFF=NTSC,PAL / 1035i,1080i,1080i50 / 720p,480p,575p /

77 MOTION_TH_MIN., 8/ 8/ 8/ 8/ 22/ 22/ 22/ 22 0 ~ 255 089 L2&&DNR-ON =NT,PAL/L2&&DNR-OFF=NT,PAL/L2=1035i,1080i,1080i50/L2=720p,480p,575p

78 MOTION_TH_MAX, 16 / 16 / 16 / 16 / 0 ~ 255 090

38 / 38 / 38 / 38

79 MOTION_TH_DL, 8/ 12/ 8/ 8/ 8/ 12/ 8/ 8 0 ~ 255 091

80 MOTION_WEIGHT_0, 9/ 9/ 9/ 9/ 9/ 9/ 9/ 9 0 ~ 15 092

81 MOTION_WEIGHT_1, 8/ 8/ 8/ 8/ 8/ 8/ 8/ 8 0 ~ 15 093

82 MOTION_WEIGHT_2, 7/ 7/ 7/ 7/ 7/ 7/ 7/ 7 0 ~ 15 094

83 MOTION_WEIGHT_3, 6/ 6/ 6/ 6/ 6/ 6/ 6/ 6 0 ~ 15 095

84 MOTION_WEIGHT_4, 5/ 5/ 5/ 5/ 5/ 5/ 5/ 5 0 ~ 15 096

85 MOTION_WEIGHT_5, 4/ 4/ 4/ 4/ 4/ 4/ 4/ 4 0 ~ 15 097

86 MOTION_WEIGHT_6, 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3 0 ~ 15 098

87 MOTION_WEIGHT_7, 2/ 2/ 2/ 2/ 2/ 2/ 2/ 2 0 ~ 15 099

88 MOTION_WEIGHT_8, 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1 0 ~ 15 100

89 MOTION_SUM_0, 20/ 20/ 0/ 0/ 20/ 20/ 0/ 0 0 ~ 1023 101

90 MOTION_SUM_1, 32/ 32/ 9/ 9/ 32/ 32/ 9/ 9 0 ~ 1023 103

91 MOTION_SUM_2, 86/ 86/ 0/ 0/ 86/ 86/ 0/ 0 0 ~ 1023 105

92 MOTION_SUM_3, 110 / 110 / 63 / 63 / 0 ~ 1023 107

110 / 110 / 63 / 63

93 PEAK_V_LPF_SEL, 1 0 or 1 109 (reg 9) fix

94 PEAK_V_CORR, 0 0 ~ 255 110

95 PEAK_V_GAIN, - 0 ~ 63 111 Read only

96 PEAK_V_GAIN_TH, 0 0 ~ 255 112

97 PEAK_V_GAIN_SLOPE, 0 0 ~ 7 113

98 PEAK_V_MAX, 255 0 ~ 255 114

99 TI_Y_TH_MIN., 1 0 ~ 255 115

100 TI_Y_TH_MAX, 255 0 ~ 255 116

101 TI_Y_CORR, 1 0 ~ 255 117

102 TI_Y_GAIN, 1 0 ~ 63 118

103 TI_Y_GAIN_TH, 0 0 ~ 255 119

104 TI_Y_GAIN_SLOPE, 0 0 ~ 7 120

105 TI_Y_GAIN_SEL, 1 0 ~ 7 121

106 TI_C_TH_MIN., 0 0 ~ 255 122

107 TI_C_TH_MAX, 0 0 ~ 255 123

108 TI_C_CORR, 0 0 ~ 255 124

109 TI_C_GAIN, 0 0 ~ 63 125 (reg 9) fix

110 TI_C_GAIN_TH, 0 0 ~ 7 126

No. Adjustment Item Initial Value Range Input source / Description

111 TI_C_GAIN_SLOPE, 0 0 ~ 7 127

112 TI_C_GAIN_SEL, 0 0 ~ 7 128

113 PEAK_H_BPF_SEL, 0 / 1 0 ~ 3 129 (reg A) NTSC,PAL,480p,575p / 720p,1035i,1080i,1080i50

114 PEAK_H_CORR, 3 / 0 0 ~ 255 130

115 PEAK_H_GAIN, - / - 0 ~ 63 131

116 PEAK_H_GAIN_TH, 0 / 0 0 ~ 255 132

117 PEAK_H_GAIN_SLOPE, 2 / 2 0 ~ 7 133

118 PEAK_H_GAIN_SEL, 1 / 1 0 ~ 3 134

119 PEAK_H_MAX, 255 / 255 0 ~ 255 135

120 Y2G, - / - 0 ~ 1023 136 / 137 (reg B) NTSC,PAL,480p,575p / 1035i,1080i,1080i50,720p

121 CB2G, - / - 0 ~ 1023 138 / 139

122 CR2G, - / - 0 ~ 1023 140 / 141

123 Y2B, - / - 0 ~ 1023 142 / 143

124 CB2B, - / - 0 ~ 1023 144 / 145

125 CR2B, - / - 0 ~ 1023 146 / 147

126 Y2R, - / - 0 ~ 1023 148 / 149

127 CB2R, - / - 0 ~ 1023 150 / 151

128 CR2R, - / - 0 ~ 1023 152 / 153

129 G_Y_OUT_OS, 0 0 ~ 255 154 (reg C) fix

130 G_Y_OUT_MIN., 0 0 ~ 255 155

131 G_Y_OUT_DC, 0 0 ~ 255 156

132 G_Y_OUT_MAX, 255 0 ~ 255 157

133 B_CB_OUT_OS, 0 0 ~ 255 158

134 B_CB_OUT_MIN., 0 0 ~ 255 159

135 B_CB_OUT_DC, 0 0 ~ 255 160

136 B_CB_OUT_MAX, 255 0 ~ 255 161

137 R_CR_OUT_OS, 0 0 ~ 255 162

138 R_CR_OUT_MIN., 0 0 ~ 255 163

139 R_CR_OUT_DC, 0 0 ~ 255 164

140 R_CR_OUT_MAX, 255 0 ~ 255 165

141 CINEMA_START_H, 0 / 0 / 0 0 ~ 255 166 (reg D) IP-ON=NTSC / IP-ON=NTà»äO / IP-OFF

142 CINEMA_SIZE_H, 160 / 0 / 0 0 ~ 255 167

143 CINEMA_START_V, 1 / 0 / 0 0 ~ 255 168

144 CINEMA_SIZE_V, 60 / 0 / 0 0 ~ 255 169

145 CINEMA_MOTION_TH, 16 / 0 / 0 0 ~ 255 170

146 CINEMA_DET_TH, 384 / 0 / 0 0 ~ 65535 171 / 172

147 CINEMA_DET_FIELD, 7 / 0 / 0 0 ~ 7 173

148 CINEMA_CTL_SWAP, 20 / 0 / 0 0 ~ 31 174

149 CINEMA_CTL_Y, 0 / 1 / 1 0 or 1 175-1

150 CINEMA_CTL_C, 1 / 1 / 1 0 or 1 175-0

151 EXT_CINEMA_DET, 0 / 0 / 0 0 or 1 176-2

152 EXT_CINEMA_MODE, 0 / 0 / 0 0 or 1 176-1

153 EXT_CINEMA_SWAP, 0 / 0 / 0 0 or 1 176-0

154 STINT 0 / 0 / 0 0 ~ 31 177 (reg E) without RGB = NTSC,PAL,480p,575p / without RGB = 720p,1035i,1080i,1080i50 / RGB

155 SCOL 140 / 140 / 180 0 ~ 255 178

156 CB2B_STD 454 / 454 / 454 0 ~ 1023 179 / 180

157 CR2B_STD 0 / 0 / 0 0 ~ 1023 181 / 182

158 CB2R_STD 0 / 0 / 0 0 ~ 1023 183 / 184

159 CR2R_STD 359 / 359 / 359 0 ~ 1023 185 / 186

160 CB2G_STD 1015 / 105 / 1015 0 ~ 1023 187 / 188

161 CR2G_STD 842 / 842 / 842 0 ~ 1023 189 / 190

162 S_SHP 8 / 10 / 0 0 ~ 63 191

Group: 21 IP (MB40C348)

0 V_AMP 0 0 or 1 adr0-2

1 DSEL 1 0 or 1 adr0-1

2CE00 or 1 adr0-0

3 COUNTER_W 64 0 ~ 4095 adr1,adr2(3-0)

4 ADC_OUT 0 0 or 1 adr3-7

5HSYNC_POL 1 0 or 1 adr3-6

6CLK_DELAY 0 0 ~ 63 adr3(5-0)

7 DSYNC_DELAY 1 0 ~ 3 adr4(7-6)

8 ADCLK_B 1 0 or 1 adr4-5

9 ADCLK_A 1 0 or 1 adr4-4

10 DSYNC_B 1 0 or 1 adr4-3

11 DSYNC 1 0 or 1 adr4-2

12 CLK_B 1 0 or 1 adr4-1

13 CLK 1 0 or 1 adr4-0

14 DIVIDER 0 0 ~ 3 adr5(7-6)

15 VCO_CHG 0 0 or 1 adr5-5

16 CURRENT 0 0 or 3 adr5(4-3)

17 counter 1 0 or 1 adr5-2

18 out_clk 0 0 or 1 adr5-1

No. Adjustment Item Initial Value Range Input source / Description

Electrical Adjustments

-12-

-13-

Electrical Adjustments

19 clk_chb 1 0 or 1 adr5-0

Group: 22 ICS1523

0ICS_R0_EnDLS 0/ 0/ 0/ 0/ 0/ 0/ 0/ 0 0 ~ 1 R0

1ICS_R0_EnPLS 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1 0 ~ 1 NTSC & 480i / PAL & SECAM & 525i / 1035i / 1080i60 / 1080i50 / 720p / 480p / 575p

2 ICS_R0_Func_Sel 0/ 0/ 0/ 0/ 0/ 0/ 0/ 0 0 ~ 1

3 ICS_R0_Fbk_Sel 0/ 0/ 0/ 0/ 0/ 0/ 0/ 0 0 ~ 1

4ICS_R0_Fbk_Pol 0/ 0/ 0/ 0/ 0/ 0/ 0/ 0 0 ~ 1

5 ICS_R0_Ref_Pol 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1 0 ~ 1

6 ICS_R0_PD_Pol 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1 0 ~ 1

7ICS_R0_Pden 0/ 0/ 0/ 0/ 0/ 0/ 0/ 0 0 ~ 1

8 ICS_R1_PSD 2/ 2/ 0/ 0 0/ 0/ 0/ 0 0 ~ 3 R1 (Left Data : Progressive = ON , Right Data : Progressive = OFF)

9 ICS_R1_PFD 6/ 6/ 6/ 6 6/ 5/ 5/ 5 0 ~ 7 NTSC & 480i / PAL & SECAM & 525i / 1035i / 1080i60 /1080i50 / 720p / 480p / 575p

10 ICS_R3_FBD 2600/ 2654/ 2458/ 2458 0 ~ 8191 R3_R2

2866/ 1343/ 1273/ 1276 NTSC & 480i / PAL & SECAM & 525i / 1035i / 1080i60 / 1080i50 / 720p / 480p / 575p

11 ICS_R4_Fil_Sel 0 0 ~ 1 R4

12 ICS_R4_DPA_OS 0 0 ~ 63 NTSC & 480i / PAL & SECAM & 525i / 1035i & 1080i60 & 1080i50 / 720p & 480p & 575p

13 ICS_R5_Mask_Rev 0 0 ~ 63 R5

14 ICS_R5_DPA_Res 0 0 ~ 3 NTSC & 480i / PAL & SECAM & 525i / 1035i & 1080i60 & 1080i50 / 720p & 480p & 575p

15 ICS_R6_Out_Scl 0 0 ~ 3 R6

16 ICS_R6_Ck2_Inv 0 0 ~ 1 NTSC & 480i / PAL & SECAM & 525i / 1035i & 1080i60 & 1080i50 / 720p & 480p & 575p

17 ICS_R6_OE_F 1 0 ~ 1

18 ICS_R6_OE_T2 0 0 ~ 1

19 ICS_R6_OE_P2 0 0 ~ 1

20 ICS_R6_OE_Tck 0 0 ~ 1

21 ICS_R6_OE_Pck 1 0 ~ 1

22 ICS_R7_In_Sel 0 0 ~ 1 R7

23 ICS_R7_Osc_Div 0 0 ~ 127 NTSC & 480i / PAL & SECAM & 525i / 1035i & 1080i60 & 1080i50 / 720p & 480p & 575p

24 ICS_R8_PLL 0 0 ~ 15 R8

25 ICS_R8_DPA 10 0 ~ 15 NTSC & 480i / PAL & SECAM & 525i / 1035i & 1080i60 & 1080i50 / 720p & 480p & 575p

Group: 30 SAM3

0 SAM3_AREA_DISP_ON_ud 0 0 ~ 1 Aperture compensation Area Display 0: OFF 1: ON

1 SAM3_SA_ON_ud 0 0 ~ 1 Y signal converter switch 0: OFF 1: ON

2 SAM3_MONI_SEL_ON_ud 0 0 ~ 1 CPU data monitor switch 0: OFF 1: ON

3 SAM3_SHP_EN_SET_ud 194 0 ~ 4095 Set aperture compensation effective period

4 SAM3_SHP_EN_RST_ud 1538 0 ~ 4095 Reset aperture compensation effective period

5 SAM3_Area_ON_Pic_LEVEL 31 0 ~ 255

6 SAM3_Area_ON_Pic_MON 0 0 ~ 1

7 SAM3_ColoM_Point_MON 0 0 ~ 1

8 SAM3_TURBO_OFF_GAIN 0 0 ~ 255

9 SAM3_TURBO_ON_GAIN 25 0 ~ 255

Group: 31 SAM3 Enhanser

0 SAM3_ENH_PC_ON/OFF 0 0 ~ 1 Enhanser for PC 0: Disable 1: Enable

1 SAM3_ENH_AV_ON/OFF 0 0 ~ 1 Enhanser for AV 0: Disable 1: Enable

2 SAM3_ENH_Change_L_ud 17 0 ~ 100 Enhanser

3 SAM3_ENH_CORE_L_ud 63 0 ~ 127

4 SAM3_ENH_DNR_Y_ud 64 0 ~ 1023

5 SAM3_AB_ON_ud 3 0 ~ 3

6 SAM3_EGE_ud 0 0 ~ 3

7 SAM3_Enh_Hset_PC_X_ud 18 0 ~ 255

8 SAM3_Enh_Hrst_PC_X_ud 138 0 ~ 255

9 SAM3_Enh_Vset_PC_X_ud 0 0 ~ 255

10 SAM3_Enh_Vrst_PC_X_ud 97 0 ~ 255

11 SAM3_Enh_Hset_PC_F_ud 18 0 ~ 255

12 SAM3_Enh_Hrst_PC_F_ud 138 0 ~ 255

13 SAM3_Enh_Vset_PC_F_ud 12 0 ~ 255

14 SAM3_Enh_Vrst_PC_F_ud 85 0 ~ 255

15 SAM3_Enh_Hset_PC_V_ud 68 0 ~ 255

16 SAM3_Enh_Hrst_PC_V_ud 115 0 ~ 255

17 SAM3_Enh_Vset_PC_V_ud 18 0 ~ 255

18 SAM3_Enh_Vrst_PC_V_ud 79 0 ~ 255

19 SAM3_Enh_Hset_AV_F_ud 18 0 ~ 255

20 SAM3_Enh_Hrst_AV_F_ud 138 0 ~ 255

21 SAM3_Enh_Vset_AV_F_ud 12 0 ~ 255

22 SAM3_Enh_Vrst_AV_F_ud 85 0 ~ 255

23 SAM3_Enh_Hset_AV_Z_ud - 0 ~ 255

24 SAM3_Enh_Hrst_AV_Z_ud - 0 ~ 255

25 SAM3_Enh_Vset_AV_Z_ud - 0 ~ 255

26 SAM3_Enh_Vrst_AV_Z_ud - 0 ~ 255

27 SAM3_Enh_Hset_AV_N_ud 18 0 ~ 255

28 SAM3_Enh_Hrst_AV_N_ud 138 0 ~ 255

29 SAM3_Enh_Vset_AV_N_ud 0 0 ~ 255

30 SAM3_Enh_Vrst_AV_N_ud 97 0 ~ 255

No. Adjustment Item Initial Value Range Input source / Description

31 SAM3_Enh_PC_LEVEL0 0 0 ~ 31

32 SAM3_Enh_PC_LEVEL1 21 0 ~ 31

33 SAM3_Enh_PC_LEVEL2 21 0 ~ 31

34 SAM3_Enh_PC_AREA_HS 0 0 ~ 3

35 SAM3_Enh_PC_AREA_VS 3 0 ~ 7

36 SAM3_Enh_PC_AREA_HE 3 0 ~ 3

37 SAM3_Enh_PC_AREA_VE 5 0 ~ 7

38 SAM3_Enh_PC_AREA1 50 0 ~ 655

39 SAM3_Enh_PC_AREA2 50 0 ~ 655

40 SAM3_Enh_AV_LEVEL0 23 0 ~ 31

41 SAM3_Enh_AV_LEVEL1 23 0 ~ 31

42 SAM3_Enh_AV_LEVEL2 22 0 ~ 31

43 SAM3_Enh_AV_AREA_HS 1 0 ~ 3

44 SAM3_Enh_AV_AREA_VS 0 0 ~ 7

45 SAM3_Enh_AV_AREA_HE 2 0 ~ 3

46 SAM3_Enh_AV_AREA_VE 7 0 ~ 7

47 SAM3_Enh_AV_AREA1 0 0 ~ 655

Group: 32 SAM3 Auto Picture

0 SAM3_Cont_ON/OFF 1 0 ~ 2 Enable Flag 0 : Disable 1 : Enable(recovery) 2 : Enable(re-judgement)

1 SAM3_Cont_L1_MD1_L 3 0 ~ 31

2 SAM3_Cont_L1_MD2_L 3 0 ~ 31

3 SAM3_Cont_L1_MD3_L 3 0 ~ 31

4 SAM3_Cont_L2_MD1_L 5 0 ~ 31

5 SAM3_Cont_L2_MD2_L 5 0 ~ 31

6 SAM3_Cont_L2_MD3_L 5 0 ~ 31

7 SAM3_Cont_OFFSET 10 0 ~ 511

8 SAM3_Cont_APL_LEVEL 400 0 ~ 511

9 SAM3_Cont_APL_M_LEVEL 400 0 ~ 511

10 SAM3_Cont_APL_SPEED 4 1 ~ 64

11 SAM3_Cont_Chg_LEVEL1 15 0 ~ 127

12 SAM3_Cont_Chg_LEVEL2 30 0 ~ 127

13 SAM3_Cont_Hst_PC_X_ud 90 0 ~ 4095

14 SAM3_Cont_Vst_PC_X_ud 2 0 ~ 4095

15 SAM3_Cont_Hblk_PC_X_ud 31 0 ~ 63

16 SAM3_Cont_Vblk_PC_X_ud 23 0 ~ 63

17 SAM3_Cont_Hst_PC_F_ud 90 0 ~ 4095

18 SAM3_Cont_Vst_PC_F_ud 97 0 ~ 4095

19 SAM3_Cont_Hblk_PC_F_ud 31 0 ~ 63

20 SAM3_Cont_Vblk_PC_F_ud 17 0 ~ 63

21 SAM3_Cont_Hst_PC_V_ud 283 0 ~ 4095

22 SAM3_Cont_Vst_PC_V_ud 146 0 ~ 4095

23 SAM3_Cont_Hblk_PC_V_ud 19 0 ~ 63

24 SAM3_Cont_Vblk_PC_V_ud 14 0 ~ 63

25 SAM3_Cont_Hst_AV_F_ud 90 0 ~ 4095

26 SAM3_Cont_Vst_AV_F_ud 98 0 ~ 4095

27 SAM3_Cont_Hblk_AV_F_ud 31 0 ~ 63

28 SAM3_Cont_Vblk_AV_F_ud 17 0 ~ 63

29 SAM3_Cont_Vst_AV/F/V_ud 178 0 ~ 4095

30 SAM3_Cont_Vblk/AV/F/V_ud 12 0 ~ 63

31 SAM3_Cont_Vst_AV/F/V_ud 210 0 ~ 4095

32 SAM3_Cont_Vblk/AV/F/V_ud 10 0 ~ 63

33 SAM3_Cont_Hst_AV_Z_ud - 0 ~ 4095

34 SAM3_Cont_Vst_AV_Z_ud - 0 ~ 4095

35 SAM3_Cont_Hblk_AV_Z_ud - 0 ~ 63

36 SAM3_Cont_Vblk_AV_Z_ud - 0 ~ 63

37 SAM3_Cont_Vst_AV/Z/C_ud - 0 ~ 4095

38 SAM3_Cont_Vblk/AV/Z/C_ud - 0 ~ 63

39 SAM3_Cont_Hst_AV_N_ud 90 0 ~ 4095

40 SAM3_Cont_Vst_AV_N_ud 2 0 ~ 4095

41 SAM3_Cont_Hblk_AV_N_ud 31 0 ~ 63

42 SAM3_Cont_Vblk_AV_N_ud 23 0 ~ 63

43 SAM3_Cont_Vst/AV/N/V_ud 98 0 ~ 4095

44 SAM3_Cont_Vblk/AV/N/V_ud 17 0 ~ 63

45 SAM3_Cont_Vst/AV/N/C_ud 162 0 ~ 4095

46 SAM3_Cont_Vblk/AV/N/C_ud 13 0 ~ 63

47 SAM3_Level-up_Mode_EQ 2 0 ~ 16

Group: 33 SAM3 ColorM (Color Management)

0 SAM3_COLM_Yrange_ud 8 0 ~ 32

1 SAM3_COLM_UVphase_ud 6 0 ~ 32

2 SAM3_COLM_UVcomp_ud 95 50 ~ 100

3 SAM3_ColM_MinSlope_ud 3 0 ~ 10

4 SAM3_ColM_MaxSlope_ud 18 10 ~ 30

No. Adjustment Item Initial Value Range Input source / Description

Electrical Adjustments

-14-

-15-

Electrical Adjustments

5 SAM3_ColM_ConvPT_ud 3 1 ~ 5

6 SAM3_ColM_BASE_X_ud 24 0 ~ 1024

7 SAM3_ColM_BASE_Y_ud 1 0 ~ 1024

8 SAM3_ColM_Get_Y_ud 9 1, 3, 5, 9

9 SAM3_ColM_Nsh_Yrange 32 0 ~ 64

10 SAM3_ColM_Fsh_UVnorm 3 0 ~ 10

11 SAM3_ColM_Fsh_UVphase 100 0 ~ 900

12 SAM3_ColM_Fcut_UVnorm 50 0 ~ 640

13 SAM3_ColM_Ncut_MinY 0 0 ~ 127

14 SAM3_ColM_Ncut_MaxY 255 128 ~ 255

15 SAM3_ColM_Sci_Col_ud 0 0 ~ 4

16 SAM3_ColM_View_Yinc_ud 76 0 ~ 128

17 SAM3_ColM_View_Rinc_ud 4 0 ~ 8

18 SAM3_ColM_View_Ginc_ud 4 0 ~ 8

19 SAM3_ColM_View_Binc_ud 4 0 ~ 8

20 SAM3_ColM_General_ud 98 0 ~ 255

21 SAM3_ColM_PC_XS_N_ud 0 0 ~ 2048

22 SAM3_ColM_PC_XE_N_ud 1024 0 ~ 2048

23 SAM3_ColM_PC_YS_N_ud 0 0 ~ 2048

24 SAM3_ColM_PC_YE_N_ud 768 0 ~ 2048

25 SAM3_ColM_PC_XS_N_ud 0 0 ~ 2048

26 SAM3_ColM_PC_XE_N_ud 1024 0 ~ 2048

27 SAM3_ColM_PC_YS_N_ud 0 0 ~ 2048

28 SAM3_ColM_PC_YE_N_ud 768 0 ~ 2048

29 SAM3_ColM_AV_XS_N_ud 0 0 ~ 2048

30 SAM3_ColM_AV_XE_N_ud 1024 0 ~ 2048

31 SAM3_ColM_AV_YS_N_ud 0 0 ~ 2048

32 SAM3_ColM_AV_YE_N_ud 768 0 ~ 2048

33 SAM3_ColM_AV_XS_N_ud 0 0 ~ 2048

34 SAM3_ColM_AV_XE_N_ud 1024 0 ~ 2048

35 SAM3_ColM_AV_YS_N_ud 0 0 ~ 2048

36 SAM3_ColM_AV_YE_N_ud 768 0 ~ 2048

Group: 40 DIMMER

0 DIMMER_AREA_HS 27 0 ~ 2047

1 DIMMER_AREA_HR 1051 0 ~ 2047

2DIMMER_AREA_VS 4 0 ~ 2047

3 DIMMER_AREA_VR 772 0 ~ 2047

4DIMMER_CTRL_LEVEL1 75 0 ~ 32767

5DIMMER_CTRL_LEVEL2 150 0 ~ 32767

6DIMMER_CTRL_LEVEL3 225 0 ~ 32767

7DIMMER_CTRL_LEVEL4 300 0 ~ 32767

8DIMMER_CTRL_LEVEL5 375 0 ~ 32767

9DIMMER_CTRL_LEVEL6 450 0 ~ 32767

10 DIMMER_CTRL_LEVEL7 525 0 ~ 32767

11 DIMMER_CTRL_LEVEL8 600 0 ~ 32767

12 DIMMER_CTRL_LEVEL9 675 0 ~ 32767

13 DIMMER_CTRL_LEVEL10 750 0 ~ 32767

14 DIMMER_CTRL_LEVEL11 825 0 ~ 32767

15 DIMMER_CTRL_LEVEL12 900 0 ~ 32767

16 DIMMER_CTRL_LEVEL13 975 0 ~ 32767

17 DIMMER_CTRL_LEVEL14 1050 0 ~ 32767

18 DIMMER_CTRL_LEVEL15 1125 0 ~ 32767

19 DIMMER_AVERAGE_POINT 4 1 ~ 16

20 DIMMER_AVERAGE_DATA - 0 ~ Read only

21 DIMMER_COLOR_DATA - 0 ~ Read only

22 DIMMER_LEVEL - 0 ~ 15 Read only

Group: 100 GAMMA

0 Standard GAMMA 0 0 / 0 0 ~ 1023 PC,DVI standard / AV Standard

1 Standard GAMMA 1 220 / 200 0 ~ 1023 Read only

2 Standard GAMMA 2 340 / 300 0 ~ 1023

3 Standard GAMMA 3 440 / 408 0 ~ 1023

4 Standard GAMMA 4 528 / 502 0 ~ 1023

5 Standard GAMMA 5 587 / 559 0 ~ 1023

6 Standard GAMMA 6 660 / 628 0 ~ 1023

7 Standard GAMMA 7 705 / 682 0 ~ 1023

8 Standard GAMMA 8 742 / 720 0 ~ 1023

9 Standard GAMMA 9 770 / 751 0 ~ 1023

10 Standard GAMMA 10 795 / 780 0 ~ 1023

11 Standard GAMMA 11 820 / 810 0 ~ 1023

12 Standard GAMMA 12 847 / 843 0 ~ 1023

13 Standard GAMMA 13 875 / 867 0 ~ 1023

14 Standard GAMMA 14 920 / 900 0 ~ 1023

No. Adjustment Item Initial Value Range Input source / Description

15 Standard GAMMA 15 1023 / 960 0 ~ 1023

16 Real/Cinema GAMMA 0 0 / 0 -512 ~ 511 PC,DVI standard / AV Standard

17 Real/Cinema GAMMA 1 10 / 15 -512 ~ 511 Read only

18 Real/Cinema GAMMA 2 6 / 9 -512 ~ 511 Bright OFF Standard

19 Real/Cinema GAMMA 3 3 / 7 -512 ~ 511

20 Real/Cinema GAMMA 4 2 / 4 -512 ~ 511

21 Real/Cinema GAMMA 5 0 / 0 -512 ~ 511

22 Real/Cinema GAMMA 6 -2 / -2 -512 ~ 511

23 Real/Cinema GAMMA 7 -4 / -4 -512 ~ 511

24 Real/Cinema GAMMA 8 -7 / -7 -512 ~ 511

25 Real/Cinema GAMMA 9 -9 / -9 -512 ~ 511

26 Real/Cinema GAMMA 10 -11 / -11 -512 ~ 511

27 Real/Cinema GAMMA 11 -13 / -13 -512 ~ 511

28 Real/Cinema GAMMA 12 -16 / -16 -512 ~ 511

29 Real/Cinema GAMMA 13 -20 / -20 -512 ~ 511

30 Real/Cinema GAMMA 14 -24 / -24 -512 ~ 511

31 Real/Cinema GAMMA 15 0 / 0 -512 ~ 511

Group: 101 COLSHD (Color Shading Correction)

0Level R-MAX 738 0 ~ 1023

1Level R-MID1 632 0 ~ 1023

2Level R-MID2 518 0 ~ 1023

3Level R-MIN 226 0 ~ 1023

4Level G-MAX 738 0 ~ 1023

5Level G-MID1 632 0 ~ 1023

6Level G-MID2 518 0 ~ 1023

7Level G-MIN 226 0 ~ 1023

8Level B-MAX 738 0 ~ 1023

9Level B-MID1 632 0 ~ 1023

10 Level B-MID2 518 0 ~ 1023

11 Level B-MIN 226 0 ~ 1023

Group: 500 ADC

0 ADC G-OFFSET 55 0 ~ 255 ✻ Pedestal adjustment [G]

1 ADC B-OFFSET 55 0 ~ 255 ✻ Pedestal adjustment [B]

2 ADC R-OFFSET 55 0 ~ 255 ✻ Pe destal adjustment [R]

3 ADC G-GAIN 61 0 ~ 255

4 ADC B-GAIN 63 0 ~ 255

5 ADC R-GAIN 65 0 ~ 255

6ADC BandWidth PC 3 0 ~ 3

7 ADC BandWidth AV 3 0 ~ 3

Group: 502 Keystone Aspect

0 ASPECT_SCALE 64 0 ~ 255

1 ASPECT_POSITION 64 0 ~ 255

2 OSD V Position 0 -

3 OSD H Position 0 -

4V Scaler 50 -

5V Scaler Position 2500 0 ~ 5000

6H Scaler 50 0 ~ 255

7H Scaler Position 2500 0 ~ 5000

8 Aspect Customize Mode 0 0 ~ 1 0: Normal, 1: Custom

Group: 510 NTSC Gakaku

0 NTSC TOTAL DOTS 1316 0 ~ 2048

1 NTSC DISP DOTS 1024 0 ~ 2048 NT

2 NTSC H BACK PORCH 573 0 ~ 2048

3 NTSC V BACK PORCH 41 0 ~ 2048

4 NTSC DISP LINE 457 0 ~ 2048

5 NTSC CLAMP 0 0 ~ 2048

Group: 511 PAL Gakaku

0PAL TOTAL DOTS 1352 0 ~ 2048

1PAL DISP DOTS 1024 0 ~ 2048 PAL

2PAL H BACK PORCH 665 0 ~ 2048

3PAL V BACK PORCH 57 0 ~ 2048

4PAL DISP LINE 535 0 ~ 2048

5PAL CLAMP 0 0 ~ 2048

Group: 512 HDTV 1080i-60 Gakaku

0 TOTAL DOTS 1206 0 ~ 2048

1 DISP DOTS 1024 0 ~ 2048 1080i60

2H BACK PORCH 417 0 ~ 2048

3V BACK PORCH 50 0 ~ 2048

4 DISP LINE 1053 0 ~ 2048

5 CLAMP 7 0 ~ 2048

Group: 513 HDTV 1080i-50 Gakaku

0 TOTAL DOTS 1444 0 ~ 2048

No. Adjustment Item Initial Value Range Input source / Description

Electrical Adjustments

-16-

-17-

Electrical Adjustments

1 DISP DOTS 1024 0 ~ 2048 1080i50

2H BACK PORCH 381 0 ~ 2048

3V BACK PORCH 51 0 ~ 2048

4 DISP LINE 1050 0 ~ 2048

5 CLAMP 7 0 ~ 2048

Group: 514 HDTV 1035i Gakaku

0TOTAL DOTS 1206 0 ~ 2048

1 DISP DOTS 1024 0 ~ 2048 1035i

2H BACK PORCH 415 0 ~ 2048

3V BACK PORCH 87 0 ~ 2048

4 DISP LINE 1012 0 ~ 2048

5 CLAMP 7 0 ~ 2048

Group: 515 HDTV 720p Gakaku

0TOTAL DOTS 1352 0 ~ 2048

1 DISP DOTS 1024 0 ~ 2048 720p

2H BACK PORCH 882 0 ~ 2048

3V BACK PORCH 54 0 ~ 2048

4 DISP LINE 702 0 ~ 2048

5 CLAMP 8 0 ~ 2048

Group: 516 HDTV 575p Gakaku

0TOTAL DOTS 1320 0 ~ 2048

1 DISP DOTS 1024 0 ~ 2048 575p

2H BACK PORCH 866 0 ~ 2048

3V BACK PORCH 101 0 ~ 2048

4 DISP LINE 547 0 ~ 2048

5 CLAMP 8 0 ~ 2048

Group: 517 HDTV 480p Gakaku

0TOTAL DOTS 1283 0 ~ 2048

1 DISP DOTS 1024 0 ~ 2048 480p

2H BACK PORCH 828 0 ~ 2048

3V BACK PORCH 82 0 ~ 2048

4 DISP LINE 460 0 ~ 2048

5 CLAMP 7 0 ~ 2048

Group: 518 RGB NTSC Gakaku

0TOTAL DOTS 1314 0 ~ 2048

1 DISP DOTS 1024 0 ~ 2048 RGB NTSC

2H BACK PORCH 555 0 ~ 2048

3V BACK PORCH 40 0 ~ 2048

4 DISP LINE 459 0 ~ 2048

5 CLAMP 4 0 ~ 2048

Group: 519 RGB PAL Gakaku

0TOTAL DOTS 1352 0 ~ 2048

1 DISP DOTS 1024 0 ~ 2048 RGB PAL

2H BACK PORCH 651 0 ~ 2048

3V BACK PORCH 57 0 ~ 2048

4 DISP LINE 535 0 ~ 2048

5 CLAMP 4 0 ~ 2048

Group: 520 RGB 1080i-60 Gakaku

0TOTAL DOTS 1206 0 ~ 2048

1 DISP DOTS 1024 0 ~ 2048 RGB 1080i60

2H BACK PORCTH 417 0 ~ 2048

3V BACK PORCTH 50 0 ~ 2048

4 DISP LINE 1053 0 ~ 2048

5 CLAMP 7 0 ~ 2048

Group: 521 RGB 1080i-50 Gakaku

0TOTAL DOTS 1444 0 ~ 2048

1 DISP DOTS 1024 0 ~ 2048 RGB 1080i50

2H BACK PORCTH 381 0 ~ 2048

3V BACK PORCTH 51 0 ~ 2048

4 DISP LINE 1050 0 ~ 2048

5 CLAMP 7 0 ~ 2048

Group: 522 RGB 1035i Gakaku

0TOTAL DOTS 1206 0 ~ 2048

1 DISP DOTS 1024 0 ~ 2048 RGB 1035i

2H BACK PORCTH 415 0 ~ 2048

3V BACK PORCTH 87 0 ~ 2048

4 DISP LINE 1013 0 ~ 2048

5 CLAMP 7 0 ~ 2048

Group: 523 RGB 720p Gakaku

0TOTAL DOTS 1352 0 ~ 2048

1 DISP DOTS 1024 0 ~ 2048 RGB 720p

2H BACK PORCTH 882 0 ~ 2048

No. Adjustment Item Initial Value Range Input source / Description

3V BACK PORCTH 54 0 ~ 2048

4 DISP LINE 702 0 ~ 2048

5 CLAMP 8 0 ~ 2048

Group: 524 RGB 575p Gakaku

0 TOTAL DOTS 1320 0 ~ 2048

1 DISP DOTS 1024 0 ~ 2048 RGB 575p

2H BACK PORCTH 864 0 ~ 2048

3V BACK PORCTH 104 0 ~ 2048

4 DISP LINE 547 0 ~ 2048

5 CLAMP 8 0 ~ 2048

Group: 525 RGB 480p Gakaku

0 TOTAL DOTS 1283 0 ~ 2048

1 DISP DOTS 1024 0 ~ 2048 RGB 480p

2H BACK PORCTH 828 0 ~ 2048

3V BACK PORCTH 84 0 ~ 2048

4 DISP LINE 462 0 ~ 2048

5 CLAMP 7 0 ~ 2048

Group: 526 SCART 575i Gakaku

0 TOTAL DOTS 1352 0 ~ 2048

1 DISP DOTS 1024 0 ~ 2048 SCART 575i

2H BACK PORCTH 661 0 ~ 2048

3V BACK PORCTH 57 0 ~ 2048

4 DISP LINE 535 0 ~ 2048

5 CLAMP 0 0 ~ 2048

Group: 527 SCART 480i Gakaku

0 TOTAL DOTS 1314 0 ~ 2048

1 DISP DOTS 1024 0 ~ 2048 SCART 480i

2H BACK PORCTH 564 0 ~ 2048

3V BACK PORCTH 39 0 ~ 2048

4 DISP LINE 459 0 ~ 2048

5 CLAMP 0 0 ~ 2048

Group: 550 Gakaku Option

0480i H Offset 243 0 ~ 255 Horizontal position offset of Component signal

1575i H Offset 247 0 ~ 255

2 HDCP Over Scan 0 0 ~ 3 HDCP 0 : No over scan 1 : 103% 2 : 106% 3 : 109% 4 : 112% 5 : 115%

No. Adjustment Item Initial Value Range Input source / Description

Electrical Adjustments

-18-

-19-

Electrical Adjustments

● MAIN BOARD

Test Points and Locations

* Following information differs from the previous chassis No. MR3-XP5500, others are the same;

- The locations of Test points TP13BCB/RCR/GY have been changed.

K8N

K8H

TP9885 TP9884

TP1301E

IC341

TP351

K8W

TP1312

TP9851

TP9852

TP1311

IC9851

TP805

IC804

K8C

TPFN5

TPFN1

TP401DA

TP401CL

TPFN6

IC801

K8V

IC808

IC7801

TE801

TP801

TPFN4

K8M

K8EK8R K8U

K10Q

K10P

K10R

TP814

TP815

TP20R

TP20G

TP20B

TE20

TP21G

TE201

TPCKB

TP21R

TP21B

TP21R TP21G TP21B

TP301

TPHS

TPGBLK

TPCOAST

TPVS

TPBVCLP1

TPGLK

IC231

TP23D

TE13

TP304

TP302

TP303

TPAD

IC212

TE301

TP306

TP308

TP307

TE202

TP8002

IC3101

IC3212

IC3213

IC3211

TPGPEN

TPVRB

TPT2 TPT0

TPT3

IC4261

IC4271

IC4251

TP2361

TP13RCR

IC9501

TP9502

TPVRB

TP13RCR

TP9501

TPGHS

TPHO

TPVD

TPGHS TPGVS

IC2311

TP13GY TP13BCB

TP13BCB

TPSW

TE9401

TRGFBK

TPGVS

TP13GY

TP9507 TP9506

TP9504

TP9503

TP533

TP4021D

TE2301

TP401E

IC531

TP532

TP1533

IC2402

IC6301

TP8302

TE4202

TP531

TP1532 TP1531

TP4201B

TP1305

K25G

TP4201C

TPFN7

IC1801

TP4201A

TP1306

TP4201E

K8O

TP1502

TP1501

TP503

TE8601

TE4231

TP4201

IC4231

IC6303

TPFN3

K8P

1AA4B10C34700

TPEXTFB

TP501CL

TP501EN

IC1501

TP502

TP501E

TP501DA

TP1503

TP501

IC1561

TP1562

TP562

TP1563

K25R

K25B

TP501

TP561

TP1561

A_side

K8D

TP561

TP1534

K8S

K8J

-20-

Chassis over view

■ Chassis Block Diagrams

R-LCD PANEL G-LCD PANEL B-LCD PANEL

PSIG

IC501

R-PANEL

DRIVER

IC1501

R-PANEL

DRIVER

IC401

DIGITAL

GAMMA

PSIG

IC531

G-PANEL

DRIVER

IC1531

DRIVER

G-PANEL

IC561

B-PANEL

SGRAM

IC6301,02,03,04

IC6301

IC9501

CAPTURE

IC304

EEPROM

BUFFER

IC3211,12,13

IC9401

COLOR

AI PICTURE,

IC301

SCAN

SYSTEM

CONVERTER,

A/D

IC231

MANAGEMENT

CONTROL

SDRAM

IC351

FLASH

IC341

SRAM

H/V

BUFFER

IC4251,61,71

VCO

IC4231

H/V

IC4541

BUFFER

H/V

RGB

H/V

RECEIVER

RGB

IC201

RGB-SW

IC1201

RGB

RGB-SW

DIGITAL

RGB

DVI-D

INPUT-1

DIGITAL INPUT

IC3214

BUFFER

RGB

ANALOG INPUT

IC3251

IC3224

BUFFER

H/V

Y,Cb,Cr

RGB

ANALOG

RGB

D-SUB_15

INPUT-1

IC4281

BUFFER

IC1202

MON. SW

BUFFER

IC4101

SELECTOR

RGB

INPUT-2

Y/C

HSYNC

Video

H/V

IC5304

SYNC SEP.

IC5302

SYNC SW

H/V

IC5301

MON. SW

H/V

ANALOG

RGB

D-SUB_25

NETWORK

IMAGER

DVI

IC8001

H/V

IC1561

DRIVER

I/P

IC4201

A/D

IC2311

IC4503

Cb,Cr

IC4531

YUV SW

VIDEO

IC3101

DECODER

Y/C

IC1141

NT/PAL-SW

IC1101

3D-Y/C

IC1141

NT/PAL-SW

CVBS

IC4104

CSYNC SW

VIDEO

Component

DRIVER

B-PANEL

CONVERTER

Y,Cb,Cr

Y/C

3L-Y/C

IC2101

Y,Cb,Cr

INPUT-3

MOTORS

IC1601

LENS SHIFT

IC2341

CLAMP

IC4501

SHARPNESS

YUV

Y/C

S-VIDEOCOMPONENT

MMM

ZOOM

IC1602

IC1611

FOCUS

I/O

IC1641

EXPANDER

IC804

S-RAM

IC803

FLASH ROM

IC1631,IC1632

AUDIO-AMP.

IC1651

PRE-AMP.

IC1652

AUDIO-CONTROL

IC5001

AUDIO-SW

L/R

PC1

PC2

AUDIO

FANS

IC6602,03

FAN CONTROL

DAC

IC7801

FAN CONTROL

FAIL

POWER

PF_BUFFER

IC5801,31,61,81

IC7821,41,61,81

IC801

Audio-L/R

IC3801

L/R

SPEAKER

VIDEO

LAMP

BALLAST

IC1801

I/O EXPANDER

CPU

IC3803

MOUSE

DECODER

IC3802

MOUSE

DRIVER

RS-232C

PORT

CONTROL

SWITCHING

F_R/C

R_R/C

100~240V

LINE

FILTER

ACTIVE

POWER

SUPPLY

POWER

IC806

PRESSURE

TEMP.

IC1691

TEMP.

IC1871,72

IC808

EEPROM

USB

IC9801

CONTROLLER

USB

LEDS

SENSOR

-21-

Inputs & video signal processing stage in AV BOARD

Chassis Block Diagrams

* Following information differs from the previous chassis No. MR3-XP5500, others are the same;

- IC7301<TA1370>, sync separator between IC4101 and K30R, has been deleted.

RGB(DIGITAL)

INPUT

ANALOG (D-SUB15)

DVI-D

DIGITAL (DVI-D)

INPUT 1

D-SUB

RGB(ANALOG)

IN/OUT

INPUT 2 (BNC)

G/Y/VIDEO

B/CB/PB

R/CR/PR

H/V

INPUT 3 (RCA)

Y/VIDEO

CB/PB

CR/PR

INPUT 3 (DIN)

S-VIDEO

DIGITAL TMDS DATA

DDC_CLK/DATA

PC1_R PC1_G PC1_B PC1_H PC1_V

S_IN Yes : L

S_SW IN

S_IN No : H

RGB SW.

IC1202

M OUT

1,3,5

12,10,8

PC1_H

33,34,35

36,37

43,42,41

44,45

3,2,1

IC5301

12,5

14,4

SW.

<4053>

RGB SW.

IC1201

20,18,16

IN1

SELECTOR

IC4101

IN2

IN3

15 16YG

IC4145

CSYNC SW.

IC4104

DIGITAL RGB

IC5308

MONITOR OUT ON : L MONITOR OUT OFF : H

SYNC SW.

2,5

13,3

PC1_H/V

<4053>

1,3

PC2_H/V

PC_R/G/B CG_R/G/B

SCL1/SDA1

27,26,25

2,4

SEL0:SEL1 = H : H --> INPUT 1 SEL0:SEL1 = L : H --> INPUT 2

AV SEL0/1

SEL0:SEL1 = L : L --> INPUT 3

IC5302

CG1/CG2

IC4102

NOR

IC5312

AMP.

G_SYNC

INPUT 1 : L INPUT 2 : H

SYNC SEP.

IC5304

IC7302

IC4105 IC7303

SVIDEO_Y/C

IC5306

CG_HSYNC CG_VSYNC

IC5307

SCART

2151_Y/CB/CR

1370_H

1370_V

CVBS

15,16

17,18

3,4 7,8

11,12

33,34

3,4 7,8

11,12

15,16

17,18

45,46

49,50,53,54

TO MAIN BOARD "K10A"

K30P

TO MAIN BOARD "K10B" TO MAIN BOARD "K10C"

K30Q K30R

-22-

Chassis Block Diagrams

Video signal processing stage

* Following information differs from the previous chassis No. MR3-XP5500, others are the same;

- Test points TP13RVR/BCB/GY have been changed, and the clamp circuit of IC211 is deleted.

IC301

SCAN

CONVERTER

131

100

101

IC3211

BUFFER

D_R

IC3212

BUFFER

D_G

IC8001

DVI-RECEIVER

HDCP_CLK/DATA

DDC_DATA

IC8071

BUS SW

IC8081

PC_DDC

EEPROM

IC8061

DDC_CLK

IC8091

HD_DDC

DIGITAL TMDS DATA

DDC_CLK/DATA

K10A

From AV BOARD "K30P"

BUS SW

EEPROM

IC3213

BUFFER

D_B

D_V

TP21R

SCL6/SDA6 SCL3/SDA3

11,12

AD_HS

D_H

IC3214

2184

TP21B

TP21G

RGB

PC Analog : L

PJ Net : H

CG OUT

20,18,16

IC201

RGB-SW

8,10,12

NET_RGB

7,8

3,4

K40A

K70A

IC231

A/D

5,13,20

BUFFER

<74LCX541>

1,3,5

15,16

IIC_AD

31,32

TPGHS

CG/NET_VS

181516

IC3251

BUFFER

<74LCX541>

GVS_PW

GHS_PW

1513

IC4281

TPGVS

181516

IC3224

BUFFER

<74LCX541>

For RGB(SCART) source

NET_H/VSYNC

TPHD

24123

BUFFER

<74LCX541>

TPVD

SCL3/SDA3

TA1370 : L

TB1274 : H

1274EN2

SCL1/SDA1

IC4251

BUFFER

189

FUNC_IPV_HSYNC

VCO

IC4231

V_VSYNC

H/V

IC4541

BUFFER

VIDEO DECODER

25,26,27

RGB

IC1101

NT 3D-Y/C SEP.

IC4261

BUFFER

IC4201 IP CONVERTER <TC240C4FTB>

118

IC2311

A/D

TP13RCR

TP13BCB

IC4551

IC4552

CXA2151 : L

TB1274 : H

IC4531

YUV SW

1274EN1

IC3101

IC1141

NT/PAL-SW

<4053>

IC1141

NT/PAL-SW

<4053>

IC141

IC2101

PAL 3L-Y/C SEP.

IC4271

BUFFER

TP13GY

IC4553

IC4503

C_V

PAL : L

NTSC : H

Q1143

NT-PAL

RGB : L OTHERS : H

NOT_RGB

786

43,44

C, Y

SGRAM

IC6301, IC6302,IC6303,IC6304

SCLK3/SDATA3

IC4501

SHARPNESS

CLAMP

IC2341

DAC

IC9405

SCL1/SDA1

2151_Y/CB/CR

K70C

NETWORK OPTION

I/F BOARD

CG_H/VSYNC

CG_RGB

SCART(CVBS for RGB Scart Sync Signal)

1370_H/V

CVBS

K10B K10C

From AV BOARD "K30R"From AV BOARD "K30Q"

SVIDEO_Y/C

-23-

Chassis Block Diagrams

System Controls

* Following information differs from the previous one for chassis No. MR3-XP5500, others are the same;

- IC7301 is deleted, and the pin functions of IC1801 are changed.

DRIVE BOARDMAIN BOARD

PORT

IC1641

K16R

K8T

BOARD

POWER

BOARD

SUB POWER

K8D CN66AK66D CN6A

MOTOR

4-5

CONTROL

OUT

I/O

DSUB

RESET

R/C

JACK

DVI-DDDC_CLK/DATA

AV BOARD

IC4101

EXPANDER

K30R

21-24 35-36 51-54 41-42

K10C

SELECTOR

CLAMP

ANALOG

OUT

PORT

IC9405

DAC

CLAMP

CG/NET

OUT

PORT

IC212

DAC

VIDEO

CONTROL

OUT

PORT

IC9931

I/O

EXPANDER

IC3101

VIDEO

DECODER

IC2101

3L-Y/C

IC1101

3D-Y/C

BOARD

SENSOR

TEMP.

IC1691

SENSOR

K16I

3,5

K8X

FAN

CONTROL

OUT

PORT

IC7801

DAC

IC1872

TEMP.

SENSOR

IC1871

TEMP.

SENSOR

IC808

EEPROM

K30P

K10A

SDA6 SCL6

SDA3 SCL3

SDA3

SCL3

SDA5

SCL5

R_R/C

37-3831-26

IC8091

EEPROM

IC8061

IC8081

EEPROM

IC8071

DDC

IC8001

RECEIVER

IC231

IC301

SCAN

CONV.

IC4231

I/P-VCO

IC401

DIGITAL

GAMMA

BUS SW

DVI

A/D

SCL_AD

SDA_AD

USB

IC9801

CONTROL

K30Q

K10B

HD_DDC

CONTROL

I/F

IC3802

MOUSE.

IC3803

MOUSE.

IC3801

DECODER

LAMP

BOARD

BALLAST

K7B

RXD/TXD

IC9501

CAPTURE

IC9401

PICTURE

IC4201

I/P

CONV.

LCD DRIVER

IC501,IC1501,

IC531,IC1531,

IC561,IC1561

IC2311

A/D

PORT

DRIVER

RS232C

SERIAL-

PARALLEL

K8L

SERIAL-

1,5

PARALLEL

BUFFER

FLIPFLOP

NETWORK

K70C

K70A

K40A

IC9884

IC9851

IC4861

VIDEO

CONTROL

OUT

PORT

IC9883

IC804

SRAM

IC803

FLASH

ROM

OPTION

I/F BOARD

KEY

SWITTCH

K8J K68A118

WARNING

IO_ENB

LED

CONTROL BOARD

LED-On: L

READY

LAMP_REP

IC1801

I/O EXPANDER

From the power fail detection diodes.

PA N E L_ENB

IC5801,IC5831,

IC5861,IC5881

BUFFER

R_R/C

1,7

Q1851

RC1: L

RC2: L

RC1_SW

RC2_SW

OPTION

RESISTORS

R/C

RECEIVER

K28A

K8U

R/C1

FRONT RC BOARD

IC1851

Q1852

See "Power supply &

protection circuit"

SCL1/SDA1

29,30

SCL2/SDA2

51,52

KEY1

KEY2

KEY3

Always Available

SCL*/SDA*

IIC_3 : 113,114

IIC_5 : 59,69

IIC_6 : 58,36

RX*/TX*

IC801

CPU

SCLK/SDATA

139,140

CPU_RESET

WRL/READ

Always Available

POWER

119

120

OPT1

CPUD0-7

121

122

OPT2

R_C

143

-24-

■ Power Supply Lines

Power supply lines & protection circuits

* Following information differs from the previous chassis No. MR3-XP5500, others are the same;

- FAN controls have been changed.

K70C

S5V

IC6609

Q6611

IC6616

K7B

3.3V

IC6618

15.7V

S6V

POWER

K8L

415

RXD

TXD

5VPC

5VD_N

6VPC

I/F

BOARD

K70B

5VD

Q6629

Q6622

15VP

IC6607

PFC_SW

IC_RESET

P_FAIL P_FAIL

FAN_DRIVE

FAN_CONT1

FAN_CONT2

BOARD

IC9882

IC9851

UART

CPU

3.3V_N

1-2

5VA

6VPC

L6617

L6606

K66D K66F

IC4891

D0-7

CN16C

1.8V_N

K66N

K66E

1-210-1257

1-2 9-105-6

891011 476 1-2

Lamp Error: H

111

FN901

FN905 FN902

FILTER

SW905

SW902

AV BOARD

K10U

268 4

K66G

P_FAIL

121212

K66L K66M

K66S

12VF2

Q6626

BOARD

SUB POWER

CN66A

9-107-8

R697,R698

CN6C

K6AC

BOARD

SWITCH

THERMAL

SWITCH

INTERLOCK

49-52

K30P

S-5V

9VAV

5VAV

9VAV

5VAV

IC6621

12VF1

FAN_CONT1

IC6603

10VA

K6AK7A

LAMP

BALLAST

IC6601

10VA

Q6627

16V

CN6A

BOARD

LAMP

S-5V

IC6622

FAN_CONT2

Q6603

IC6602

15.7V

12 13 3-4 2 159-11

9VA

M_DRIVE BOARD

P_FAIL

K16R

K8D K8G K8E

LAMP_SW

LAMP_DET

Lamp-On: H

138

9-107-8648

15.7V

IC1621

12VMD

S5V

5VA

5VD

15.5V

3.3V

S-5V

15VP

S5V

S6V

FAN_CONT1

FAN_CONT2

FAN_DRIVE

Q4807

FAN_SW

Power-On: H

137

49-52

K10A

IC_RESET

Reset : L

IC7811

FAN-7_SW

FAN_CONT1

FAN_CONT2

D2351

D4819

IC2351

PFC_SW

Power-On: H

FN904 FN906

K8M K8N K8O

IC7821

FAN_DRIVE

456

D1103

D1101

D4809

PRESSURE

3.3V_AV

2.5V_YC

IC1161

IC1102

IC8031

IC4801

C3.3V

3.3V_DVI

D8063

IC806

SENSOR

123

D234

3.3V_AD1

IC234

D4817

D4816

D4815

IC391

S3.3V

D391

FN907

IC7841

DAC

IC7801

D235

D236

3.3V_AD2

3.3V_AD3

IC235

IC236

D4818

IC1431

1.8V

D1431

IC392

S2.5V

D4814

D392

For FAN CONTROL

FN903

121212

K8P

IC7861

D2353

IC2353

IC1451

2.5V1

D1451

D8033

IC3102

5V1

D3102

D3101

IC5861,5881

IC5801,5831,

CPU

D0-7

IC7881

IC8611

2.5V_IP

IC3103

5V2

Power Fail: L

P-FAIL

BUFFER

IC1691

TEMP. SENSOR

SCL2

SDA2

SCL2

SDA2

SENSOR BOARD

K8X K16I

MAIN BOARD

IC1872

TEMP. SENSOR

SCL2

SDA2

IC1871

TEMP. SENSOR

SCL2

SDA2

For ABNORMAL TEMP. DETECT

and for FAN CONTROL

AC CORD

IC801

CPU

-25-

■ Control Port Functions

● Parallel I/O Expander (IC1801, M66501FP)

1PA1 ECO_SW Lamp Eco Mode sw Eco = H O 2PA0 TURBO_LED Bright LED Drive O 3 Vcc 5V 4RD READ_CPU Read Select Active L I 5WR WRL_CPU Write Select Active L I 6CS IO_CS Chip Select Active L I 7 RESET EXP_RST Reset input Active H I 8 GND1 GND -

9A2 PORT_SEL2 Port Select 2 I 10 A1 PORT_SEL1 Port Select 1 I 11 A0 PORT_SEL0 Port Select 0 I 12 D0 D0 Data Bus 0 I/O 13 D1 D1 Data Bus 1 I/O 14 D2 D2 Data Bus 2 I/O 15 D3 D3 Data Bus 3 I/O 16 D4 D4 Data Bus 4 I/O 17 D5 D5 Data Bus 5 I/O 18 D6 D6 Data Bus 6 I/O 19 D7 D7 Data Bus 7 I/O 20 PC7 MOUSE/CPU_SW CPU/Air Mouse Select Mouse = L O 21 PC6 NET_SW Network Imager On/Off Net On = L O 22 PC5 NET_OUT Network Imager Sync Enable Enable = L O 23 PC4 A_MUTE Mute output O 24 PC0 CG1/CG2 Computer 1/Computer 2 SW CG1 = L O 25 PC1 CG_OUT RGB (PC Analog)/ RGB (PJ Net) signal selector PC = L O 26 PC2 NOT_RGB Soft Sharpness SW RGB = L O 27 PC3 DDC_CONT DDC PC/CPU SW CPU = H O 28 PG0 Not used I 29 PG1 NET_DET Network Imager detection Network = L I 30 PG2 Not used 31 PG3 SCDT_DIF DVI Sync Detection DVI = H I 32 GND2 GND 33 PF0 WARNING Temp Warning LED Drive output LED On = L O 34 PF1 LAMP_REP Lamp Replace LED Drive output LED On = L O 35 PF2 READY Ready LED Drive output LED On = L O 36 PF3 PD_DIF PD DVI power down output Lamp ON = L O 37 PF4 DVI_CONT PD0 DVI power down output Enable = L O 38 PF5 DDC_WRITE HD-DDC PC/CPU SW CPU = H O 39 PF6 PLLSTB_CPU CXD3531 Reset ( Reset = PLLSTB/XCLR : H/L --> L/L --> L/H ) O 40 PF7 XCLR_CPU CXD3531 Reset O 41 Vcc 5 V 42 PE0 A SW1 Audio SW 1 ( SW1/SW2 : L/L = IN-1, H/L = IN-2, L/H = IN-3 ) O 43 PE1 A SW2 Audio SW 2 O 44 PE2 SYNC_OFF Sync OFF for RGB input Sync OFF = L O 45 PE3 IPSEL_CSA CPU Strobe signal for IP Conversion Active L O 46 PE4 SP_OFF Speaker output On/Off On = H O 47 PE5 PANEL_ENB CXA7004R Enable Active L O 48 PE6 49 PE7 IO_ENB BUS I/O Enable Enable = L O 50 GND3 GND 51 PB0 LENS_TOP Lens Top Detection Top=L I 52 PB1 Not used 53 PB2 LENS_BOTTOM Lens Bottom Detection Bottom=L I 54 PB3 Not used I 55 PB4 Not used I 56 PB5 S-SWIN S-Input Detection Yes/No Yes = H I 57 PB6 Not used I 58 PB7 Not used I 59 PA7 RC_RESET Air Mouse IC Reset H - L - H = Reset I 60 PA6 RCIDSW3 Remote control code SW ( 1/2/3 : LLL = Code1, HLL = Code2, - - - ) O 61 PA5 RCIDSW2 Remote control code SW O 62 PA4 RCIDSW1 Remote control code SW O 63 PA3 RC2_SW Rear remote control pre-amp. output On/Off Enable = L O 64 PA2 RC1_SW Front remote control pre-amp output On/Off Enable = L O

Pin No. Name Function Name Function Polarity I/O

* Following information differs from the chassis

No. MR3-XP5500, others are the same;

- IC1801 has been changed from M66500FP to M66501FP.

-26-

Control Port Functions

1R Reset Input I 2 SCL IIC BUS SCL I 3SDA IIC BUS SDA I/O 4 A05 FAN_CONT1 FN901,FN902 = Intake Fans O 5 A06 FAN_CONT2 FN905 = Exhaust Fan O 6 A07 FAN-7_SW for Cooling Lamp Bottom FN907 ON = H O 7 A08 Not used O 8 VrefL DAC Lower Reference Voltage input -

9 VrefU 1 DAC Upper Reference Voltage input (CH5~CH8) 10 Vss GND 11 VrefU 2 DAC Upper Reference Voltage input (CH1~CH 4) 12 A01 FAN_CONT4 FN903 = Cooling Fan for PBS O 13 A02 FAN_CONT5 FN907 = Cooling Fan for Lamp Bottom O 14 A03 FAN_CONT6 FN906 = Cooling Fan for Lamp Front O 15 A04 FAN_CONT7 FN904 = Cooling Fan for Power Board O 16 Vcc Power Supply for Output Buffer (12V) 17 Vdd Power Supply +5V 18 CS2 Slave address setting port 2 (Vdd) I 19 CS1 Slave address setting port 1 (Vdd) I

20 CS0 Slave address setting port 0 (Vdd) I

Pin No. Name Function I/O

● IIC Bus D/A Converter (IC7801, M62399FP) Port Functions

* Following information differs from the previous chassis No. MR3-XP5500, others are the same;

- The pin 6 of IC7801 for FAN-7_SW has been added.

+ 60 hidden pages

Sanyo PLC-XP56,PLC-XP56L Service Manual

Specifications and Main Features

Frequently Asked Questions

User Manual