Sanyo PLC-XF71 User Manual

Download

Page 1

Multimedia Projector

MODEL PLC-XF71

Owner’s Manual

✽ Projection lens is optional.

Page 2

Features and Design

This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 1.07 billion colors, and matrix liquid crystal display (LCD) technology.

◆

◆ Functionally Rich

Multilanguage Menu Display

This projector has many useful functions such as lens shifting, cei ling an d rear projectio n, perpendicular omnidirectional projection, variety of lens options, etc.

◆ Simple Computer System Setting

The proj e ctor has the Multi -scan system to conform to almost all computer output signals quickly (p.34). Supported resolution up to WUXGA.

Useful Functions for Presentation

◆

Digital zoom function allows you to focus on the crucial information during a presentation (pp.29,

40).

◆ Security Function

The Security function helps you to ensure security of the projector. With the Key lock function, you can lock the operation on the side control or remote control (p.53). PIN code lock functions prevents unauthorized use of the projector (pp.53–54).

◆

Lamp Control

Brightness of the projection lamp can be selected (p.51).

Operation menu is available in 12 languages; Engl i sh , G e rm an , Fre n ch, It alian , S p an is h , Portuguese, Dutch, Swedish, Russian, Chinese, Korean, and Japanese (p.48).

◆ Logo Function

The Logo function allows you to customize the screen logo (pp.49–50). You can capture an image for the screen logo and use it for the starting-up display or between presentations.

◆ Motor-driven Lens Shift

Projection lens can be moved up, down, right and left with the motor-driven lens shift function. This function makes it easy to provide projected image where you want. Zoom and focus can also be adjusted with a motor-driven operation. (p.27)

* Zoom and focus functi ons may not ope rate

depending on the optional lens.

◆ Multi Versatile Platform

This projector applies various input/output terminals and 2 terminal slots for expansion to tune to diversity of signals from computers and video equipment (p.19). For optional interface boards, contact sales dealer where you purchased the projector.

◆ Power Management

The Power management function reduces power consumption and maintains lamp life (p.52).

◆ Automatic Filter Replacement Function

The projector monitors the condition of the filter and replaces a filter automatically when it detects the clogging.

◆ Helpful Maintenance Functions

Lamp and filter maintenance functions provide for better and proper maintenance of the projector.

◆ Shutter Function

The projector is equipped with the shutter that provides complete blackness for a while the projected image is not needed with keeping the projector on. The Shutter management function allows you to set the timer. It prevents leaving the projector on with the shutter closed for a long time. (p.55)

◆ Network board (Optional)

Network board is an optional product to control and set up the projector via the network cables with the web browser on your computer. It can be controlled and set up the projector remotely. Contact the sales dealer where you purchased this projector for optional parts.

✔Note:

•The On-Screen Menu and figures in this manual may differ slightly from the product.

•The contents of this manual are subject to change without notice.

Page 3

Features and Design................ 2

Table of Contents .................. 3

To The Owner ..................... 4

Safety Instructions ................. 5

Air Circulation 6 Installing the Projector in Proper Directions 7

Moving the Projector 8

Compliance ....................... 9

Part Names and Functions.......... 10

Front 10

Back 10

Terminals and Connectors 11

Side Control and Indicators 12

Side Control 12

Indicators 13

Remote Control 14

Remote Control Battery Installation 15

Remote Control Receivers and Operating Range 15

Wired Remote Control 15

Remote Control Code 16

Installation ...................... 17

Lens Installation 17

Positioning Projector 17

Lens Shift Adjustment 18

Picture Level and Pitch Adjustment 18

Terminals of Projector 19

Connecting to Computer 20

Connecting to Video Equipment 21

Connecting the AC Power Cord 22

Basic Operation .................. 23

Turning On the Projector 23

Turning Off the Projector 24

How to Operate the On-Screen Menu 25

Menu Bar 26

Operating with Projector Control 27

Operating with Remote Control 29

Computer Input .................. 34

Computer System Selection 34

Auto PC Adjustment 35

Manual PC Adjustment 36

Image Level Selection 38

Screen Size Adjustment 39

Video Input ...................... 41

Video System Selection 41

Image Level Selection 42

Screen Size Adjustment 43

Picture Image .................... 45

Image Adjustment 45

Setting.......................... 48

Setting 48

Maintenance and Care ............. 57

Filter Instructions 57

Replacing the Filter Cartridge 58

Resetting the Filter Counter 59

Resetting the Scroll Counter 59

Lamp Management 60

Lamp Replacement 61

Resetting the Lamp Counter 62

Cleaning the Projection Lens 64

Cleaning the Projector Cabinet 64

Warning Indicators 65

Appendix ........................ 66

Troubleshooting 66

Menu Tree 69

Indicators and Projector Condition 72

Compatible Computer Specifications 75

Technical Specifications 77

Optional Parts 78

Configurations of Terminals 79

PIN Code Number Memo 80

Dimensions 81

Serial Control Interface 82

Input Selection ................... 31

Input 31

Computer Input Source Selection 32

Video Input Source Selection 33

Trademarks

Each name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation.

Page 4

To The Owner

3.3' (1m)

Before installing and operating the projector, read this manual thoroughly. The projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintains it in good condition for many years to come. Improper operation may result in not only shortening the product life, but also malfunctions, fire hazard, or other accidents. If your projector seems to operate improperly, read this manual again, check operations and cable connections and try the solutions in the “Troubleshooting” section in the back of this manual. If the problem still persists, contact the dealer where you purchased the projector or the service center.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO RE D U C E TH E R I S K OF ELE C T R I C

SHOCK, DO NOT REMOVE COVER (OR BAC K). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Safety Precaution

WARNING: l THIS APPARATUS MUST BE EARTHED.

l TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

– This projector produces intense light from the projection lens.

Do not stare directly into the lens, otherwise eye damage could

result. Be especially careful that children do not stare directly

into the beam.

– Install the projector in a proper position. Otherwise it may

result in a fire hazard.

– Allowing the proper amount of space on the top, sides, and

rear of the projector cabinet is critical for proper air circulation

and cooling of the unit. The diagrams shown here indicates the

minimum space required. If the projector is to be built into a

compartment or similarly enclosed, these minimum distances

must be maintained.

– Do not cover the ventilation slots on the projector. Heat build-

up can reduce the service life of your projector, and can also be

dangerous.

SIDE and TOP REAR

TH IS SYMBOL INDI CATE S THAT DANGE ROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.

TH I S SYM B O L I NDICATES TH AT TH ERE ARE IMPORTANT OPER ATING AND MAINT ENANCE INSTRUCTIONS IN THE OWNER’S MANUAL WITH THIS UNIT.

The symbol mark and recycling systems described below apply to EU countries and do not apply to countries in other areas of the world. Your product is designed and manufactured with high quality materials and components which can be recycled and/or reused. The symbol mark means that electrical and electronic equipment, batteries and accumulators, at their end-of-life, should be disposed of separately from your household waste.

Note: If a chemical symbol is printed beneath the symbol mark, this chemical symbol means that the battery or accumulator contains a heavy metal at a certain concentration. This will be indicated as follows: Hg: mercury, Cd: cadmium, Pb: lead. In the European Union there are separate collection systems for used electrical and electronic equipment, batteries and accumulators. Please, dispose of them correctly at your local community waste collection/recycling centre.

Please, help us to conserve the environment we live in!

READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE.

– If the projector is unused for an extended time, unplug the

projector from the power outlet.

– Do not project the same image for a long time, since the

afterimage may remain on the LCD panels by the characteristic

of panel.

CAUTION ON HANGING FROM THE CEILING

When hanging the projector from the ceiling, clean the air intake vents and top of the projector periodically with a vacuum cleaner. If you leave the projector unclean for a long time, the cooling fans can be clogged with dust, and it may cause a breakdown or a disaster.

DO NOT SET THE PROJECTOR IN GREASY, WET, OR SMOK Y CONDI TIO NS SUCH AS IN A KITCH EN TO PREVENT A BREAKDOWN OR A DISASTER. IF THE PR OJECTOR COMES IN CONTACT WI TH OIL OR CHEMICALS, IT MAY BECOME DETERIORATED.

CAUTION

Not for use in a computer room as defined in the Standard for the Protection of Electronic Computer/Data Processing Equipment, ANSI/NFPA 75.

Ne peut être utilisé dans une salle d’ordinateurs telle que définie dans la norme ANSI/NFPA 75 Standard for Protection of Electronic Computer/Data Processing Equipment.

Page 5

Safety Instructions

All the safet y and operating instructions should be read before the product is operated.

Read all of the instructions given here and retain them for late r use. Unplug this projector from AC power sup ply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.

Follow all warnings and instructions marked on the projector.

For added protection to the projector during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage due to lightning and power line surges.

Do not expo se this unit to rain or use near wat er... for example, in a wet basement, near a swimming pool, etc...

Do no t us e at t achm e nt s no t rec o mm e n de d by th e manufacturer as they may cause hazards.

Do not place this projector on an unstable cart, stand, or table. The projector may fall, causing serious injury to a child or adult, and serious damage to the projector. Use only with a cart or stand recommended by the manufacturer, or sold with the projector. Wall or shelf mounting should follow the manufacturer's instructions, and should use a mounting kit approved by the manufacturers.

An appl i a n c e and ca r t combi n a t i o n shou l d be mo v e d wit h car e . Qui ck st o p s , exc e ssive fo r c e, and une ven surfaces may cause the appliance and cart combination to overturn.

This projector should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied, consult your authorized dealer or local power company.

Do not overload wall outlets and extension cords as this can result in fire or electric shock. Do not allow anything to rest on the power cord. Do not locate this projector where the cord may be damaged by persons walking on it.

Do not attempt to service this projector yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified ser vice personnel.

Unplug this projector from wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the projector. c. If the projector has been exposed to rain or water. d. If the projector does not operate normally by following

the operating instructions. Adjust only those controls th a t are cov e r e d by th e operati n g instru c t i o n s as improper adjustment of other controls may result in damag e and wi ll oft en requi re extensive work by a qualified technician to restore the projector to normal operation.

e. If the projector has been dropped or the cabinet has

been damaged.

f. Whe n the pr o j e c t o r ex h ib i t s a d is t i n ct ch a n g e in

performance-this indicates a need for service.

When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or injury to persons.

Slots and openings in the back and bottom of the cabinet are provided for ventilation, to ensure reliable operation of the equipment and to protect it from overheating.

The openings should never be covered with cloth or other materials, and the bottom opening should not be blocked by placing the projector on a bed, sofa, rug, or other similar surface. This projector should never be placed near or over a radiator or heat register.

This projector should not be placed in a built-in installation such as a book case unless proper ventilation is provided.

Never push objects of any kind into this projector through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the projector.

Do not install the projector near the ventilation duct of airconditioning equipment.

Upon completion of any service or repairs to this projector, as k th e ser vice techn i c ian to per form rout i n e safety checks to determine that the projector is in safe operating condition.

NOTE FOR CUSTOMERS IN THE US

Hg LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS.

Page 6

Safety Instructions Safety Instructions

Air Circulation

Openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered.

CAUTION

Hot air is exhausted from the exhaust vent. When using or installing the projector, the following precautions should be taken.

– Do not put any flammable object or spray can near

the projector, hot air is exhausted from the air vents.

– Keep the exhaust vent at least 3’ (1 m) away from

any objects.

– Do not touch peripheral parts of the exhaust vent,

especially screws and metallic parts. These areas will become hot while the projector is being used.

– Do not put anything on the cabinet. Objects put on

the cabinet will not only get damaged but also may

cause fire hazard by heat. – Do not cover vents with papers or other materials. – Make sure that there are no objects under the

projector. An object under the projector may prevent the projector from taking cooling air through bottom vent.

Cooling fans are provided to cool down the projector. The fans’ running speed is changed according to the temperature inside the projector.

IMPORTANT!

Filter Maintenance!!

The projector uses a lamp which generates significant heat. The cooling fans and air vents are provided to dissipate the heat by drawing air into the housing and the filter is located in the intake vents to prevent dust from getting inside of the projector.

In order to care for the projector appropriately, regular cleaning is required. Remove any dirt or dust that has accumulated on the projector.

If the projector reaches a time set in the timer setting, a Filter replacement icon (Fig. 1) appears on the screen and WARNING FILTER indicator on the top panel lights up (see below), indicating that the filter replacement is necessary.

If the projector detects that the filter is clogged and no scroll is left in the filter cartridge, a Filter cartridge replacement icon (Fig. 2) appears on the screen and WARNING FILTER indicator on the top panel lights up (see below). Stop using the projector immediately and replace the filter cartridge.

Blocking the air vents and leaving the projector uncleaned for a long time may not only damage the projector and may require costly repairs but may also cause accidents or fire.

For maintenance of the filter, refer to “Filter counter” on page 56 and “Maintenance and Care” on pages 57–59.

EXHAUST VENT

Damages to the projector caused by using an uncleaned filter or improper maintenance will void the warranty on the projector.

Top Panel

Fig.1 Filter replacement icon

AIR INTAKE VENT

Fig.2 Filter cartridge replacement

icon

WARNING FILTER indicator

Page 7

Safety Instructions

10˚

10˚10˚

10˚

Installing the Projector in Proper Directions

Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe accident or fire hazard. This projector can project the picture in upward, downward, or inclined position in perpendicular direction to the horizontal plane.

✔Note:

•To inverse or reverse the image, set the ceiling function to “On.” (pp. 40, 44)

•The projector can not be operated at an altitude above 3,000 meters.

Positioning Precautions

Avoid positioning the projector as described below when installing.

Do not roll the projector more than 10 degrees from side to side.

Do not put the projector on either side to project an image.

In upward projection, do not tilt the projector over 10 degrees right and left.

In downward projection, do not tilt the projector over 10 degrees right and left.

CAUTION ON CEILING MOUNTING

For ceiling mounting, you need the ceiling mount kit designed for this projector. When not mounted properly, the projector may fall, causing hazards or injury. For details, consult your dealer. The warranty on this projector does not cover any damage caused by use of any non-recommended ceiling mount kit or installation of the ceiling mount kit in an improper location.

Page 8

Safety Instructions

Moving the Projector

Retract the adjustable feet to prevent damage to lens and cabinet. For safety, holding the projector on both sides by 2 or more people is recommended to move the projector because the projector is heavy. When moving the projector by one person from necessity, hold the handle carefully. Do not hold the lens mount cover. Moving it improperly may result in damage of cabinet or person's injury.

CAUTION IN CARRYING OR

TRANSPORTING THE PROJECTOR

– Do not drop or bump the projector, otherwise

damages or malfunctions may result.

– When carrying the projector, use a suitable carrying

case.

– Do not transport the projector by courier or any

other transport service in an unsuitable transport case. This may cause damage to the projector. For information about transporting the projector by courier or any other transport service, consult your dealer.

– Do not put the projector in a case before it is

cooled enough.

– Do not transport the projector with a replacement

lens installed.

Page 9

A S A

Compliance

GROUND

Federal Communications Commission Notice

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment.

Canadian Radio Interference Regulations

This Class A digital apparatus meets all requirements of the Canadian ICES-003.

WARNING

This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

AC Power Cord Requirement

The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.

AC Power Cord for the United States and Canada:

AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and certified by the Canadian Standard Association (CSA).

AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure that the plug will fit into the power outlet. Do not try to defeat this safety feature. Should you be unable to insert the plug into the outlet, contact your electrician.

AC Power Cord for the United Kingdom:

This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin

face of the plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus replacement fuse cover is required, ensure it is of the same colour as that visible on the pin face of the plug (i.e.

red or orange). Fuse covers are available from the Parts Department indicated in your User Instructions. If the plug supplied is not suitable for your socket outlet, it should be cut off and destroyed. The end of the flexible cord should be suitably prepared and the correct plug fitted.

WARNING: A PLUG WITH BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED IN A LIVE SOCKET

OUTLET.

The Wires in this mains lead are coloured in accordance with the following code: Green-and-yellow ············· Earth Blue ································· Neutral Brown ······························ Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings

identifying the terminals in your plug proceed as follows: The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked by the

letter E or by the safety earth symbol The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured

black.

The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured

red.

WARNING: THIS APPARATUS MUST BE EARTHED.

. If the fuse cover is detachable, never use the plug with the cover omitted. If a

or coloured green or green-and-yellow.

THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE.

Page 10

Part Names and Functions

Front

Back

!1 !3

qLens Mount Cover wProjection Lens (Option) e Indicators rInfrared Remote Receiver (Front)

t Adjustable Feet

Terminals and Connectors

y u Handle i Side Control o Lamp Cover

!0 Infrared Remote Receiver (Rear) !1Exhaust Vent

CAUTION

Hot air is exhausted from the exhaust vent. Do not put heat-sensitive objects near this side.

!2Main On/Off Switch

✽

!3 Power Cord Connector !4 Air Intake Vent !5 Air Filter Cover

✽Kensington Security Slot

This slot is for a Kensington lock used to deter theft of the projector.

* Kensington is a registered trademark of ACCO Brands

Corporation.

Page 11

Terminals and Connectors

Part Names and Functions

q

SERIAL PORT IN TERMINAL

If you control the projector by computer, you must

connect a cable (not supplied) from your computer

to this terminal.

w

SERIAL PORT OUT TERMINAL

This terminal outputs signal from SERIAL PORT IN.

More than two projectors can be controlled with

one computer by connecting SERIAL PORT IN of

another projector to this terminal.

eUSB CONNECTOR (Series B)

USB connector is to used to service the projector.

rR/C JACK

When using the wired remote control, connect the

wired remote control to this jack with a remote

control cable (not supplied).

t

DVI INPUT TERMINAL

Connect computer output (Digital/DVI-D type) to

this terminal. (p.20)

HD (HDCP Compatible) signal can be also

connected. (p.21)

D-sub 15-PIN INPUT TERMINAL

Connect computer output (Analog D-sub 15-pin type) to this terminal. (p.20)

u5 BNC INPUT JACKS

Connect the component or composite video

output signal from video equipment to VIDEO/Y, Pb/Cb, and Pr/Cr jacks or connect the computer output signal (5 BNC Type [Green, Blue, Red, Horiz. Sync, and Vert. Sync.]) to G, B, R, H/V, and V jacks (pp.20–21).

iS-VIDEO INPUT JACK

Connect the S-VIDEO output signal from video

equipment to this jack (p.21).

✽

[ RESET button

A built-in micro processor which controls this unit may

occasionally malfunction and need to be reset. This can be done

by pressing the RESET button with a pen, which will shut down

and restart the unit. Do not use the RESET function excessively.

Page 12

Part Names and Functions

Side Control and Indicators

INDICATORS

Side Control

SIDE CONTROLS

q

ON/STAND-BY

Turn the projector on or off. (pp.23,24)

wZOOM button

Zoom in and out the images. (p.27)

e

Open or close the On-Screen MENU. (pp.25, 26)

r

POINT

- Select an item or adjust the value in the OnScreen MENU. (p.25)

- Pan the image in DIGITAL ZOOM + mode. (p.40)

t

SHUTTER button

Close and open up the built-in shutter. (p.27)

y

AUTO PC ADJ.

Automatically adjust the computer image to its

optimum setting. (pp.27, 35)

button

buttons

button

u

LENS SHIFT

Select the LENS SHIFT function. (p.27)

i

FOCUS

Adjust the focus. (p.27)

o INPUT

Select an input source INPUT 1, INPUT 2, Input 3

or Input 4. (pp.31-33)

!0

SELECT

Used to execute the selected item. (p.25) It is also

used to expand image in DIGITAL ZOOM mode. (p.40)

!1 INFORMATION button

Display the input source information (p.28).

button

Page 13

Indicators

Part Names and Functions

q

LAMP Indicator

This indicator is dim when the projector is turned

on. And bright when the projector is in stand-by mode. (pp.72-74)

w

READY indicator

This indicator lights green when the projector is

ready to be turned on. And it flashes green in Power Management mode. (pp.52, 72-74)

e

WARNING TEMP. indicator

This indicator flashes red when internal projector

temperature is too high. (pp.65, 72-74)

r

WARNING FILTER indicator

– Blink slow when the filter is being scrolled (pp.

57, 72).

– Blink fast when the filter scroll is not working

properly or the filter cartridge is not installed (pp.57, 74).

– Light orange when the clogging of the filter is

detected or the filter counter reaches a time set in the timer setting, urging immediate filter/ filter cartridge replacement (pp.56, 57, 74).

t

SHUTTER indicator

Light blue when the shutter is closed. (p72)

y

LAMP 2 REPLACE indicator

Turn orange when the life of the projection lamp2

draws to an end. (p.61, 73)

LAMP 1 REPLACE indicator

Turn orange when the life of the projection lamp1

draws to an end. (p.61, 73)

Page 14

Part Names and Functions

Remote Control

u i

!0 !1 !2

✔Note:

To ensure safe op e ratio n, ob s er ve the following precautions:

• Do not bend, drop, or expose the remote control to moisture or heat.

• For cleaning, use a soft dry cloth. Do not apply benzene, thinner, spray, or any other

chemical materials.

q

ON/STAND-BY button

Turn the projector on or off. (pp.23-24)

w

AUTO PC button

Automatically adjust the computer image to its optimum

setting. (pp.29, 35)

e

LIGHT button

Light the buttons on the remote control for about 10

seconds.

MENU button

Open or close the On-Screen MENU. (pp.25-26) t POINT ed 7 8 buttons

– Select an item or adjust the value in The ON-SCREEN MENU. (p.25) –Pan the image in DIGITAL ZOOM +/– mode. (p.40)

LENS SHIFT button

Select the LENS SHIFT function. (p.29) u

FOCUS buttons

Adjust the focus. (p.29)

i

ZOOM buttons

Zoom in and out the images. (p.29)

o

FREEZE button

Freeze the picture on the screen. (p.29)

!0D.ZOOM

button

Select the Digital zoom +/- mode and resize the image. (pp.29, 40)

!1

P-TIMER button

Operate the P-TIMER function. (p.30)

!2

KEYSTONE button

Correct keystone distortion. (pp.30, 40, 44)

!3FILTER button

Scroll the filter. (p.30)

!4

SHUTTER button

Close the built-in shutter for light blocking. (pp.27, 30)

!5

SELECT

button

–Execute the selected item. (p.25) – Expand or compress the image in the DIGITAL ZOOM

mode. (p.40)

!6 SCREEN button

Select the screen size. (pp.39-40)

!7

IMAGE ADJ. button

Enter the image level adjustment mode. (pp.30, 45-47)

!8

INPUT 1, 2, 3, 4

button

Select an input source. (pp.31-33)

!9 INFO. button

Display the input source information. (p.29)

@0

IMAGE SEL. button

Select the image level. (pp.30, 38, 42)

@1

Wired Remote Jack

Connect the remote control cable (not supplied) to this jack when using as a wired remote control.

Page 15

Remote Control Battery Installation

Part Names and Functions

Open the battery compartment lid.

1 2 3

Pull up the lid and remove it.

To ensure safe operation, please observe the following precautions :

l Use two (2) AA or LR6 type alkaline batteries. l Always replace batteries in sets. l Do not use a new battery with a used battery. l Avoid contact with water or liquid. l Do not expose the remote control to moisture or heat. l Do not drop the remote control. l If the battery has leaked on the remote control, carefully wipe the case clean and install new batteries. l Risk of an explosion if battery is replaced by an incorrect type. l Dispose of used batteries according to the instructions.

Install new batteries into the compartment.

Two AA size batteries

For correct polarity (+ and –), be sure battery terminals are in contact with pins in the compartment.

Replace the compartment lid.

Remote Control Receivers and Operating Range

Point the remote control toward the projector (to Infrared Remote Receivers) when pressing the buttons. Maximum operating range for the remote control is about 16.4’ (5 m) and 60 degrees in front and rear of the projector.

Infrared Remote Receivers are provided both in front and back of the projector. You can conveniently use both of the receivers.(pp. 10, 52)

✔Note:

•

When hanging the projector from the ceiling, select the Infrared Remote Receiver which is located farther away from the fluorescent light.(p.52)

Wired Remote Control

16.4’ (5 m)

The remote control can be used as a wired remote control. Wired remote control helps you use the remote control outside of the operating range (16.4’/ 5 m). Connect the remote control and the projector with the remote control cable (sold separately). Connected with the remote control cable, the remote control does not emit wireless signal.

Page 16

Part Names and Functions

Remote Control Code

The eight different remote control codes (Code 1–Code 8) are assigned to this projector. Switching the remote control codes prevents interference from other remote controls when several projectors or video equipment next to each other are operated at the same time. Change the remote control code for the projector first before changing that for the remote control. See “Remote control” in the Setting Menu on page 52.

Check the Reset Switch to "Use position" in the

compartment lid on the back of the remote control.

While holding down the MENU button, press

and release the IMAGE ADJ. button the number of corresponding times you would like to set the number of the remote control code for the projector.

Number of Times

Remote Control Code

Code 1 1 Code 2 2 Code 3 3 Code 4 4 Code 5 5 Code 6 6 Code 7 7 Code 8 8

Pressing IMAGE ADJ.

button

Reset position

Use position

Reset switch

MENU button

IMAGE ADJ. button

Page 17

Installation

Lens Installation

Before setting up the projector, install Projection Lens on the projector.

Before installation, check where the projector is used and prepare a suitable lens. For the specifications of Projection Lens, contact sales dealer where you purchased the projector.

- Do not use the optional lens below for this projector. Otherwise damages may result.

LENS MODEL NO. : LNS-T01, LNS-T01Z

- Lens installation and replacement should be made by the qualified service personnel.

- When setting the projector after lens installation, be sure to replace a Lens Cap to protect a surface.

- When carrying or holding up the projector, be careful not to put your hands on lens part. It may damage lens, cabinet, or mechanical parts.

Positioning Projector

This projector is designed to project on a flat projection surface.

✔Note:

•

Brightness in room has a great influence on picture quality. It is recommended to limit ambient lighting in order to provide the best image.

SCREEN

Page 18

Installation

Lens Shift Adjustment

Projection lens can be moved from side to side and up and down with the motor-driven lens shift function. This function makes the positioning of images easy on the screen.(See page 27)

The display position can be shifted upward up to 50% elevation of the display.

The display position can be shifted downward up to 50% low level of the display.

When the lens is shifted to top.

When the lens is shifted to bottom.

The display position can be shifted to the left in up to 10% width of the display.

When the lens is shifted to leftmost.

Picture Level and Pitch Adjustment

The projection angle is adjustable up to 2.8 degrees upward and downward respectively by rotating front and back feet .

To raise the projector, rotate the feet clockwise.

To lower the projector or to retract the adjustable feet, rotate the feet counterclockwise.

To correct keystone distortion, press the KEYSTONE button on the remote control or select Keystone from the menu (see pages 14, 30, 40, 44).

The display position can be shifted to the right in up to 10% width of the display.

When the lens is shifted to rightmost.

REAR ADJUSTABLE FEET (Refer to p.10)

Do not rotate the adjustable feet when you see the red line on the adjustable feet. The adjustable feet may fall off.

ADJUSTABLE FEET

Page 19

Installation

Terminals of Projector

The projector has two replaceable Interface board slots. The projector's functions can be extended by installing the optional interface boards into the terminal slots. 2 vacant slots (Input 3 and 4) are provided in your purchasing the projector. For the Optional Interface Boards, contact sales dealer where you purchased the projector.

2 TERMINAL SLOTS (Factory set)

INPUT/OUTPUT TERMINALS

DVI / D-sub 15 Terminal 5-BNC / VideoTerminal

Replacement of Terminal

✔Note:

• In the replacement of interface board, turn off the projector, press the Main On/Off Switch to Off and unplug the AC power cord from the AC outlet.

Remove 2 Screws from an interface board.

Pull out the interface board.

Replace the interface board. Insert a new interface

board along Guide to ﬁt Plug into Socket.

Tighten screws to secure the interface board.

NOTES ON ORDERING OR USING OPTIONAL INTERFACE BOARD

When ordering or using Optional Interface Board, contact your sales dealer. When contacting the sales dealer, tell the Option Control Number (Op.cont.No.) in the menu that is located on the bottom of the information menu. (See page 28)

Screws

Guide

Socket

Plug

Figure shows Dual-SDI terminal.

Page 20

Installation

Connecting to Computer

Cables used for connection

• VGA Cable (D-sub 15 pin) *

• DVI Cable

• BNC Cable (BNC x 5)

( *One cable is supplied; Other cables are not supplied with this projector.)

Laptop type

Monitor Output

DVI Cable

DIGITAL

Monitor Output

VGA Cable

ANALOG

Monitor Output

BNC Cable ✽

H/HV

Desktop type

Terminals of

the projector

Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables.

Page 21

Connecting to Video Equipment

Cables used for connection

• Video Cable (BNC x 3, BNC x 1)

• SCART-VGA Cable

• DVI Cable

• S-Video Cable

( Cables are not supplied with the projector.)

Installation

Video Source (example)

Video Cassette Recorder

Digital Output

(HDCP compatible)

DVI Cable

DIGITAL

RGB SCART 21-pin Output

SCART-VGA

Cable

Video Disc Player

Composite Video Output

BNC Cable

VIDEOANALOG

Component video output equipment.

(such as DVD player or high-definition TV source.)

Component Video Output

Pb/Cb Pr/Cr

BNC Cable

Y-Pb/Cb-Pr/Cr

S-Video Output

S-Video Cable

S-VIDEO

Terminals of

the projector

Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables.

Page 22

Installation

Connecting the AC Power Cord

This projector uses nominal input voltages of 100-120 or 200–240 V AC. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system. If you are not sure of the type of power being supplied, consult your authorized dealer or service station. Connect the projector with all peripheral equipment before turning on the projector.

CAUTION

The AC outlet must be near this equipment and must be easily accessible.

✔Note:

• Unplug the AC power cord or turn off the MAIN ON/OFF

Switch when the projector is not in use. When the projector is in stand-by mode, it consumes a little electric power.

Connect the AC power cord (supplied) to the projector.

NOTE ON THE POWER CORD

AC power cord must meet the requirements of the country where you use the projector. Confirm the AC plug type with the chart below and proper AC power cord must be used. If the supplied AC power cord does not match your AC outlet, contact your sales dealer.

Projector side AC Outlet side

For Continental Europe

To the AC Outlet.

(200–240 V AC)

To POWER CORD CONNECTOR on your projector.

For the U.S.A. and Canada

Ground

To the AC Outlet.

(120 V AC)

For the U.K.

To the AC Outlet.

(200–240 V AC)

Page 23

Turning On the Projector

Basic Operation

Complete peripheral connections (with a computer,

VCR, etc.) before turning on the projector.

Connect the projector’s AC power cord into an AC

outlet and turn on the MAIN ON/OFF Switch. The LAMP indicator lights red and the READY indicator lights green.

Press the ON/STAND-BY button on the side control

or on the remote control. The LAMP indicator dims red and the cooling fans start to operate. The preparation display appears on the screen and the countdown starts.

After the countdown, the input source that was

selected the last time and the Lamp mode icon (see page 60) appear on the screen.

If the projector is locked with a PIN code, PIN code Input Dialog Box will appear. Enter the PIN code as instructed below.

Enter a PIN code

Use the Point ed buttons on the side control or on the remote control to enter a number. Press the Point 8 button to fix the number and move the red frame pointer to the next box. The number changes to “✳.” Repeat this step to complete entering a four-digit number. After entering the four-digit number, move the pointer to “Set.” Press the SELECT button so that you can start to operate the projector.

If you fixed an incorrect number, use the Point 7 button to move the pointer to the number you want to correct, and then enter the correct number.

If you entered an incorrect PIN code, “PIN code” and the number (✳✳✳✳) will turn red for a moment. Enter the correct PIN code all over again.

What is PIN code?

PIN (Personal Identification Number) code is a security code that allows the person who knows it to operate the projector. Setting a PIN code prevents unauthorized use of the projector.

The preparation display will disappear after 20 seconds.

Selected Input Source and Lamp control

Lamp mode

See page 60 for the Lamp mode status

✔Note:

• The Lamp replacement icon and the Filter warning icon may appear on the screen depending on the usage state of the projector.

PIN code Input Dialog Box

After the OK icon disappears, you can operate the projector.

✔Note:

• When the Logo select function is set to “Off,” the logo will not be shown on the screen (p.49).

• When the “Countdown off” or “Off” is selected in the Display function, the countdown will not be shown on the screen (p.48).

• During the countdown period, all operations are invalid.

• If the PIN code number is not entered within three minutes after the PIN code dialog box appeared, the projector will be turned off automatically.

• The “1234” is set as the initial PIN code at the factory.

A PIN code consists of a four-digit number. Refer to the PIN code lock function in the Setting Menu on page 5354 for locking operation of the projector with your PIN code.

CAUTION ON HANDLING PIN CODE

If you forget your PIN code, the projector can no longer be started. Take special care in setting a new PIN code; write down the number in a column on page 80 of this manual and keep it on hand. Should the PIN code be missing or forgotten, consult your dealer or service center.

Page 24

Basic Operation

Turning Off the Projector

Press the ON/STAND-BY button on the side control

or on the remote control, and “Power off?” appears on the screen.

Press the ON/STAND-BY button on the side control

or on the remote control again to turn off the projector. The LAMP indicator lights bright and the READY indicator turns off. After the projector is turned off, the cooling fans operate. You cannot turn on the projector during this cooling down period.

When the projector has cooled down enough, the

READY indicator lights green and then you can turn on the projector. To turn off the MAIN ON/OFF Switch, wait until the projector is completely cooled down.

Unplug the AC power cord from the AC outlet.

“Power off?” disappears after 4 seconds.

TO MAINTAIN THE LIFE OF THE LAMP, ONCE YOU TURN THE PROJECTOR ON, WAIT AT LEAST FIVE MINUTES BEFORE TURNING IT OFF. DO NOT UNPLUG THE AC POWER CORD WHILE COOLING FANS ARE RUNNING OR BEFORE THE READY INDICATOR LIGHTS GREEN AGAIN. OTHERWISE IT WILL RESULT IN SHORTENING OF THE LAMP LIFE.

DO NOT OPERATE THE PROJECTOR CONTINUOUSLY WITHOUT REST. CONTINUOUS USE MAY RESULT IN SHORTENING THE LAMP LIFE. TURN OFF THE PROJECTOR AND LET STAND FOR ABOUT AN HOUR IN EVERY 24 HOURS.

✔Note:

• When the On start function is set to “On,” the projector will be turned on automatically by connecting the AC power cord to an AC outlet (p.53).

• The running speed of cooling fans is changed according to the temperature inside the projector.

• Do not put the projector in a case before the projector is cooled enough.

• If the WARNING TEMP. indicator blinks red, see “Warning Indicators” on page 65.

• The projector cannot be turned on during the cooling period with the READY indicator turned off. You can turn it on again after the READY indicator becomes green again.

Page 25

How to Operate the On-Screen Menu

Basic Operation

The projector can be adjusted or set via the On-Screen Menu. For each adjustment and setting procedure, refer to the respective sections in this manual.

Press the MENU button on the side control or the

remote control to display the On-Screen Menu.

Use the Point

Use the Point ed buttons to select an item in the selected menu.

Press the SELECT button to show the item data.

Use the Point

To close the On-Screen Menu, press the MENU button again.

7 8 buttons to select a Menu icon.

7 8 buttons to adjust the values.

✔Note:

• The selected item is not active until the SELECT button is pressed.

Side Control

MENU button

POINT buttons

SELECT button

Remote Control

MENU button

POINT buttons

SELECT button

On-Screen Menu

Menu icon

Press the SELECT button here to display previous items.

Press the SELECT button here to display next items.

Menu bar

Pointer (red frame )

Press the Point to move the pointer.

Item

SELECT

button

ed buttons

Item data

Press the Point buttons to adjust the value.

Pointer

(red frame )

7 8

Page 26

Basic Operation

Menu Bar

For detailed functions of each menu, see “Menu Tree” on pages 69-71.

For Computer Source

q w oiuytre

qGuide Window

Show the selected Menu of the On-Screen Menu.

w

Input Menu

Used to select an input source Computer or Video (pp. 31-

33).

e

PC System Menu

Used to select computer system (p. 34).

r

PC Adjust Menu

Used to adjust the parameters to match with the input signal format (pp. 35-37).

tImage Select Menu

Used to select an image level among Standard, Real, and Image 1–10(p. 38).

For Video Source

yImage Adjust Menu

Used to adjust the computer image. [Contrast/ Brightness/ Color management/Auto picture control/Color temp./White balance (R/G/B)/Offset (R/G/B)/Sharpness/ Gamma/Reset/ Store] (pp. 45-47).

uScreen Menu

Used to adjust the size of the image. [Normal/True/Wide/ Full screen/Custom/Keystone/Ceiling/Rear/Reset/Digital zoom +/–] (pp.39-40).

iSetting Menu

Used to set the projector’s operating configurations (pp. 48-56).

oInformation Menu

Display the input source information(p. 28).

iuytr

qGuide Window

Show the selected Menu of the On-Screen Menu.

w

Input Menu

Used to select an input source Computer or Video (pp. 31-

33).

eAV System Menu

Used to select the system of selected video source (p. 41).

rImage Select Menu

Used to select an image level among Standard, Cinema, and Image 1–10 (p. 42).

tImage Adjust Menu

Used to adjust the picture image. [Contrast/Brightness/ Color/Tint/Color management/ Auto picture control/Color temp./White balance (R/G/B)/ Offset (R/G/B)/Sharpness/ Gamma/Noise reduction/Progressive/Reset/Store] (pp. 45-47)

yScreen Menu

Used to adjust the size of the image. [Normal/Wide/ Custom/Keystone/Ceiling/Rear/Reset] (pp. 43-44).

uSetting Menu

Used to set the projector’s operating configurations (pp. 48-56).

iInformation Menu

Display the input source information(p. 28).

Page 27

Operating with Projector Control

Basic Operation

Zoom Adjustment

Display “Zoom” on the screen. Press the ZOOM button and then press the point ed buttons to zoom in and out the image.

Focus Adjustment

Display “Focus” on the screen. Press the FOCUS button and then press the point ed buttons to adjust the focus of the image.

Lens Shift Adjustment

Display “Lens shift” on the screen. Use the Point ed7 8 buttons to position the screen to the desired point without having picture distortion. The screen can be moved up or down to 50 percent, or sideways up to 10 percent from the central axis of the lens shift.

Auto PC

Operate the Auto PC Adj. function. The computer screen adjustment can be done easily by pressing this button. See page 35 for details.

Adjustment

Side Control

SHUTTER button

AUTO PC ADJ. button

Zoom

Focus

ZOOM button

FOCUS button

LENS SHIFT button

POINT buttons

INFORMATION. button

Shutter Function

Shutter function allows you to completely block out light to the screen. Press the SHUTTER button to close the shutter inside the projector. To open up the shutter, press the SHUTTER button again. Refer to p.55 for detail of setting for the Shutter function.

✔Note:

• The SHUTTER button on the side control and the remote control cannot be effective when Shutter Protection is "On" in the Setting menu. (p.55)

• The SHUTTER indicator on the projector's top lights blue when the shutter is closed. (pp.13, 72)

• The projector will shut down automatically when the set time on Shutter management has passed. (p55)

• The Power management function does not work when the

shutter is closed.(p.52)

✔Note:

• The arrow disappears at the maximum lens shift in each direction.

• The arrow turns red when the lens shift comes to the center position of the screen.

Page 28

Basic Operation

Information

Information display can be used to confirm the current operating condition of the projector and the signal being projected through the projector.

Press the INFORMATION button to display the information window on the screen. To hide the information window, press the INFORMATION button again or Point 7 8 buttons.

The information window can also be selected from the menu.

Information Menu

* The H- and V-sync freq. values described in this figure

may be different from the actual values.

Page 29

Basic Operation

Operating with Remote Control

Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu.

AUTO PC button

Press the AUTO PC button on the remote control to operate the Auto PC Adj. function. The computer screen adjustment can be done easily by pressing this button. See page 35 for details.

LENS SHIFT button

See page 27 for details.

ZOOM buttons

Press the ZOOM buttons on the remote control to zoom in and out the image. See page 27 for details.

FOCUS buttons

Press the FOCUS buttons on the remote control to adjust focus of the image. See page 27 for details.

FREEZE button

Press the FREEZE button on the remote control to freeze the picture on the screen. To cancel the FREEZE function, press the FREEZE button again or press any other button.

SCREEN button

Press the SCREEN button on the remote control to select the desired screen size. The selected screen size mode appears on the screen for 4 seconds. See pages 39 to 40 and 43 to 44 for details. Press and hold the SCREEN button for more than 5 seconds to return all the screen size adjustment setting to the factory default setting.

Remote Control

AUTO PC button

LENS SHIFT button

ZOOM buttons

FREEZE button

✔Note:

•See the next page for the description of other buttons.

POINT buttons

SCREEN button

FOCUS buttons

D.ZOOM button

INFO. button

ed7 8

D.ZOOM button

Press the D.ZOOM button on the remote control to enter to the Digital zoom +/– mode. See page 40 for details.

INFO. button

Press the INFO. button on the remote control to display the information window on the screen.

See the previous page for details.

Page 30

Basic Operation

SHUTTER button

See page 27 for details.

FILTER button

Press and hold the FILTER button for more than five seconds to replace the filter mechanically. See page 51 for details.

✔Note:

•The filter cannot be rewound.

• When the filter is replaced, the total accumulated time of the filter use is automatically set to 0.

IMAGE ADJ. button

Press the IMAGE ADJ. button on the remote control to adjust a image level of the screen. For more detail, see pp.45-47.

IMAGE SEL. button

Press the IMAGE SEL. button on the remote control to select a desired image level of the screen. For more detail, see pp.38, 42.

Remote Control

SHUTTER button

IMAGE ADJ. button

KEYSTONE button

P-TIMER button

FILTER button

IMAGE SEL. button

✔Note:

•See the previous page for the description of other buttons.

P-TIMER button

Press the P-TIMER button on the remote control. The Timer display “00 : 00” appears on the screen and starts to count time (00 : 00–59 : 59). To stop the P-TIMER, press the P-TIMER button. To cancel the P-TIMER, press the P-TIMER button again.

KEYSTONE button

Press the KEYSTONE button on the remote control. The “Keystone” appears on the screen.

Use the Point ed7 8 buttons to correct keystone distortion. The keystone adjustment can be stored (pp.40, 44).

Reduce the upper width with Point e button.

Redu c e th e lo we r wid th with Point d button.

P-Timer display

• The white arrows indicate that there is no correction.

• A red arrow indicates the direction of correction.

• An arrow disappears at the maximum correction.

• If you press the KEYSTONE button on the remote

control again while the Keystone dialog box is being displayed, the keystone adjustment will be canceled.

• The adjustable range can be limited depending on the

input signal.

• “Keystone” disappears after 10 seconds.

Reduce the left part with Point 7 button.

Reduce the right part with Point 8 button.

Page 31

Input

Input Selection

Side Control

INPUT button

Side Control Operation

Press the INPUT button on the side control. It switches to INPUT 1, INPUT 2, INPUT 3 and INPUT 4 as you press the INPUT button.

Before using the INPUT button on the side control, you must select a correct input source by On-Screen Menu and the latest input source will be displayed.

Remote Control

Side Control button operation

INPUT button

INPUT 1

INPUT 2

INPUT 3

INPUT 4

INPUT buttons

Remote Control Operation

Press the INPUT 1, INPUT 2, INPUT 3 or INPUT 4 button on the remote control. It switches to INPUT 1, INPUT 2, INPUT 3 or INPUT 4 as you press the INPUT button.

Before using the INPUT button on the remote control, you must select a correct input source by On-Screen Menu and the latest input source will be displayed.

✔Note:

• Empty slots cannot be selected.

• When a slot is empty, the input is displayed in grayout.

Remote Control button operation

Page 32

Input Selection

Computer Input Source Selection

Menu Operation

When Selecting the INPUT 1 with DVI/D-sub 15 terminals

Press the MENU button to display the On-Screen Menu.

Use the Point 7 8 buttons to move the red frame pointer to the INPUT Menu icon.

Use the Point ed buttons to move the red arrow pointer

to the desired input and then press the SELECT button. Then you can switch to the desired input.

Press the select button again. The Source Select Menu

appears.

Use the Point ed buttons to select the desired source

and then press the SELECT button.

RGB (PC analog)

When your computer is connected to the INPUT 1 (ANALOG) terminal, select RGB (PC analog).

RGB (PC digital)

When your computer is connected to INPUT 1 (DIGITAL) terminal, select RGB (PC digital).

INPUT MENU

Input Menu icon

Move the pointer (red arrow) to Input 1 and press the SELECT button.

Input 1

Source Select Menu

Move the pointer (red arrow) to the desired source and press the SELECT button.

When Selecting the INPUT 2 with 5-BNC/Video/S-Video terminals

INPUT MENU

RGB

When your computer is connected to the INPUT 2 (5 BNC INPUT JACKS) terminal, select RGB.

Input 2

✔Note:

• When a slot is empty, the input is displayed in grayout.

INPUT Menu icon

Move the pointer (red arrow) to Input 2 and press the SELECT button.

Source Select Menu

Move the pointer (red arrow) to RGB and press the SELECT button.

Page 33

Video Input Source Selection

Menu Operation

When Selecting the INPUT 1 with DVI/D-sub 15 terminals

When connecting to video equipment, select the type of Video source in the Source Select Menu.

RGB (Scart)

When scart video equipment is connected to the INPUT 1 (ANALOG) terminal, select RGB (Scart).

RGB (AV HDCP)

If the HDCP-compatible signal source is connected to the INPUT 1 (DIGITAL) terminal, select RGB (AV HDCP).

Input Selection

INPUT MENU

Input Menu icon

Move the pointer (red arrow) to Input 1 and press the SELECT button.

Input 1

Source Select Menu

Move the pointer (red arrow) to RGB (Scart) or RGB (AV HDCP) and press the SELECT button.

When Selecting the INPUT 2 with 5-BNC/Video/S-Video terminals

When connecting to video equipment, select the type of Video source in the Source Select Menu.

Y, Pb/Cb, Pr/Cr

When the video input signal is connected to the Y-Pb/CbPr/Cr jacks, select Y, Pb/Cb, Pr/Cr.

Video

When the video input signal is connected to the VIDEO jack, select Video.

S-Video

When the video input signal is connected to the S-VIDEO jack, select S-Video.

INPUT MENU

Input 2

✔Note:

• HDCP (High-bandwidth Digit al Content Protection) is a system for protecting digital entertainment content which is delivered by DVI (Digital Visual Interface) from being copied. The specification of HDCP is decided and controlled by Digital Content Protection, LLC. Should the specification be changed, this projector may not display the digital content protected by HDCP.

• When a slot is empty, the input is displayed in grayout.

Input Menu icon

Move the pointer (red arrow) to Input 2 and press the SELECT button.

Source Select Menu

Move the pointer (red arrow) to Y, Pb/Cb, Pr/Cr , Video, or S-video and press the SELECT button.

Page 34

Computer Input

Computer System Selection

Automatic Multi-Scan System

This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, SXGA+, WXGA, UXGA, or WUXGA (refer to “Compatible Computer Specifications” on pages 75-76). If a computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional settings. (Some computers need to be set manually.)

One of the following messages may appear when:

Auto

-----

Mode 1

SVGA 1

✽ Mode 1 and SVGA 1 are examples.

The projector cannot recognize the connected signal conforming to the provided PC Systems. The “Auto” is displayed on the PC System Menu icon and the Auto PC Adjustment function works to display proper images. If the image is not projected properly, a manual adjustment is required. (pp. 36–37.)

There is no signal input from the computer. Check the connection between your computer and the projector. (See “Troubleshooting” on page 66.)

The preset system is manually adjusted in the PC Adjust Menu. The adjusted data can be stored in the Mode 1–10. (pp. 36-37)

PC systems provided in this projector is chosen. The projector chooses a proper system provided in the projector and displays it.

Selecting Computer System Manually

PC system can also be selected manually.

Press the MENU button to display the On-Screen Menu.

Use the Point 7 8 buttons to move the red frame pointer to the PC System Menu icon.

Use the Point ed buttons to move the red arrow pointer

to the desired system, and then press SELECT button.

PC SYSTEM MENU

PC System Menu icon Selected system is displayed.

PC SYSTEM MENU

PC System Menu icon Selected system is displayed

Systems in this dialog box can be selected.

Custom Mode (1–10) set in PC Adjust Menu. (pp.36-37)

Page 35

Computer Input

Auto PC Adjustment

Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical positions to conform to your computer.

Direct Operation

The Auto PC adjustment function can be operated directly by pressing the AUTO PC button on the remote control or the AUTO PC ADJ. button on the side control.

Menu Operation

Auto PC adj.

Press the MENU button to display the On-Screen Menu.

Use the Point 7 8 buttons to move the red frame pointer to the PC Adjust Menu icon.

Remote Control

AUTO PC button

Side Control

AUTO PC ADJ.

button

PC ADJUST MENU

Use the Point ed buttons to move the red frame pointer

to the AUTO PC adj. icon and then press the SELECT button twice.

To store the adjusted parameters.

The adjusted parameters from the Auto PC Adjustment can be stored in the projector. Once the parameters are stored, the setting can be done just by selecting Mode in PC SYSTEM Menu (p.34). See MANUAL PC ADJUSTMENT on pages 36-37.

✔Note:

•Fine sync, Total dots, Horizontal and Vertical position of certain computers cannot be fully adjusted with the Auto PC Adjustment function. When the image is not provided properly with this operation, manua l adjustm ents are required. (pp. 36-37.)

•Auto PC Adjustment cannot be operated in Digital Signal Input on the DVI terminal and “480p,” “575p,” “480i,” “575i,” “720p,” “1035i,” or “1080i” is selected on the PC SYSTEM Menu.

•Depending on the condition of signals and the type and

length of cables, the signals may not be properly viewed.

PC Adjust Menu icon

Move the red frame pointer to the Auto PC adj. and press the SELECT button twice.

“Please wait...” appears while the Auto PC adjustment is in process.

Page 36

Computer Input

Manual PC Adjustment

Some computers employ special signal formats which may not be tuned by Multi-Scan system of this projector. Manual PC Adjustment enables you to precisely adjust several parameters to match those special signal formats. The projector has 10 independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific computer.

✔Note: The PC Adjust Menu cannot be operated when the digital signal input on the DVI terminal is selected on

PC System Menu.

Press the MENU button to display the On-Screen Menu.

Use the Point 7 8 buttons to move the red frame pointer to the PC Adjust Menu icon.

Use the Point ed buttons to move the red frame pointer

to the desired item and then press the SELECT button to display the adjustment dialog box. Use the Point 7 8

buttons to adjust the setting value.

Fine sync

PC ADJUST MENU

PC Adjust Menu icon

Move the red frame pointer to the desired item and press the SELECT button.

Use the Point 7 8 buttons to adjust the value, eliminating a flicker from the image displayed (from 0 to 31).

Total dots

Use the Point 7 8 buttons to adjust the number of total dots in one horizontal period to match your PC image.

Position H

Use the Point 7 8 buttons to adjust the horizontal picture position.

Position V

Use the Point 7 8 buttons to adjust the vertical picture position.

Current mode

Press the SELECT button to show H-sync freq. and V-sync freq. of the connected computer.

Clamp

Use the Point 7 8 buttons to adjust the clamp level. When the image has dark bars, try this adjustment.

Status (Stored/Free) of the Selected Mode.

Selected Mode

Press the Point 7 8 buttons to adjust the value.

Press the SELECT button at this icon to adjust “Clamp,” “Display area H,” or “Display area V.”

Current mode

Display area H

Use the Point 7 8 buttons to adjust the horizontal area displayed by this projector.

Display area V

Use the Point 7 8 buttons to adjust the vertical area displayed by this projector.

Press the SELECT button at Current mode icon to show the information of the connected computer.

Press the SELECT button at this icon to display the previous items.

Page 37

Reset

To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select [Yes]. All adjustments will return to their previous figures.

Mode free

To clear the adjusted data, select Mode free and then press the SELECT button. Move the red arrow pointer to the Mode that you want to clear and then press the SELECT button.

Store

To store the adjusted data, select Store and then press the SELECT button. Move the red arrow pointer to one of the Mode 1 to 10 in which you want to store, and then press the SELECT button.

Quit

Computer Input

To clear the adjusted data.

Close this dialog box.

Confirmation box appears and then select [Yes].

Exit the PC Adjust Menu.

To store the adjusted data.

Vacant

Values of “Total dots,” “Position H,” “Position V,” “Display area H,” and “Display area V.”

This Mode has stored parameters.

Close this dialog box.

Confirmation box appears and then select [Yes].

Page 38

Computer Input

Image Level Selection

Direct Operation

Press the IMAGE SEL. button on the remote control to select the desired image level.

Standard

Real

Image1

•

Image 10

Menu Operation

Press the MENU button to display the On-Screen Menu.

Use the Point 7 8 buttons to move the red frame pointer to the Image Select Menu icon.

Use the Point ed buttons to move the red frame pointer

to the desired image level and then press the SELECT button.

Remote Control

IMAGE SEL.

button

IMAGE SELECT MENU

Image Select Menu icon

Standard

Normal picture level preset on the projector.

Real

Picture level with improved halftone for graphics.

IMAGE 1–10

User preset picture adjustment in the Image Adjust Menu. (p. 47)

Move the red frame pointer to the desired level and press the SELECT button.

Page 39

Screen Size Adjustment

Select the desired screen size that conforms to the input signal source.

Computer Input

Press the MENU button to display the On-Screen Menu.

Use the Point 7 8 buttons to move the red frame pointer to the Screen Menu icon.

Use the Point ed buttons to move the red frame pointer

to the desired function and then press the SELECT button.

Normal

Provide the image at the normal computer aspect ratio of 4:3.

True

Provide the image in its original size. When the original image size is larger than the screen size (1024 x 768), the projector

enters to the panning mode automatically. Use the Point ed7 8 buttons to pan the image. When adjusted, the arrows will

turn red. When reached to the correction limits, the arrows will disappear.

Wide

Provide the image to fit the wide video aspect ratio (16:9) by expanding the image width uniformly. This function can be used to provide the squeezed video signal at 16:9.

Full screen

Provide the full screen image.

SCREEN MENU

Screen Menu icon

Move the red frame pointer to the desired function and press the SELECT button.

✔Note:

• True, Full screen, and Digital zoom +/– cannot be selected when no signal is detected in the PC System Menu. (p.34)

• The projector cannot display and resolution higher than 1600 x 1200. If your computer’s screen resolution is higher than 1600 x 1200, lower the resolution before connecting the projector.

• The image data other than XGA (1024 x 768) is modified to fit the screen size in initial mode.

• The panning function may not operate properly if the stored Mode in the PC Adjust Menu is used. (p. 37)

Custom

Adjust the screen scale and position manually with this function. Press the SELECT button at Custom and the “Custom” is displayed on the screen for a few seconds. To display the Aspect dialog box, press the SELECT button at Custom again and then the Aspect dialog box appears.

Scale H/V .............. Adjust the Horizontal/Vertical screen scale.

H&V ...................... When set to “On,” the aspect ratio is

fixed. The “Scale V” appears dimmed and becomes unavailable. Adjust “Scale H,” then the screen scale is automatically modified based on the aspect ratio.

Position H/V .......... Adjust the Horizontal/Vertical screen

position.

Common .............. Save the adjusted scale to all the inputs.

Press the SELECT button at Common to display a confirmation box. To save the scale, press the SELECT button at “Yes.” When Custom is selected, the saved scale is used.

Reset .................... Reset the all adjusted values. Press

the SELECT button at Reset to display a confirmation box. To reset, press the SELECT button at “Yes.”

Press the SELECT button at Common or Reset, to display a confirmation box.

✔Note:

• When no signal is detected, “Normal” is set automatically and the Aspect dialog box disappears.

• The adjustable range for Scale H/V and Position H/V is limited depending on the input signal.

Page 40

Computer Input

Keystone

This function is used to store or reset the keystone correction when the Main On/Off Switch is pressed to Off or the AC

power cord is unplugged. Use the Point 7 8 buttons to switch between each option. Store. . . Keep the keystone correction even when the Main

On/Off Switch is pressed to Off or the AC power cord is unplugged.

Reset . . Release the keystone correction when the Main On/

Off Switch is pressed to Off or the AC power cord is unplugged.

To correct keystone distortion, press the Select button. The Keystone dialog box appears. Use the Point ed7 8 buttons to

correct keystone distortion. (p.30)

Ceiling

When this function is set to “On,” the picture is top/bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector.

Rear

When this function is set to “On,” the picture is left/right reversed. This function is used to project the image from the rear of the screen.

SCREEN MENU

Move the red frame pointer to the desired function and press the SELECT button.

Ceiling

Rear

Reset

This function returns all adjusted values to the factory default settings. Press the SELECT button at Reset to display a confirmation box. To reset, press the SELECT button at “Yes.”

Quit

Exit the Screen Size Adjustment Menu.

For zooming in and out the images

Digital zoom +

Select Digital zoom +. The On-Screen Menu disappears and “D. zoom +” appears. Press the SELECT button to expand the

image size. Use the Point ed7 8 buttons to pan the image. The Panning function can work only when the image is larger than the screen size. You can also enter the Digital zoom + mode by pressing the D.ZOOM button on the remote control.

Digital zoom –

Select Digital zoom –. The On-Screen Menu disappears and “D.zoom –” appears. Press the SELECT button to compress the image size. You can also enter the Digital zoom – mode by pressing the D.ZOOM button on the remote control.

✔Note:

• The panning function may not operate properly if the stored Mode in the PC Adjust Menu is used. (p. 37)

• The minimum compression ratio can be limited depending on the input signal or when the Keystone function is working or when the custom is selected for the screen size.

• Digital zoom +/– cannot be selected when Full screen or True is selected.

To exit the Digital Zoom +/– mode, press any button except the D.ZOOM , SELECT, and Point buttons.

Page 41

Video Input

Video System Selection

Press the MENU button to display the On-Screen Menu.

Use the Point 7 8 buttons to move the red frame pointer to the AV System Menu icon.

Use the Point ed buttons to move the red arrow pointer

to the desired system and then press the SELECT button.

Video Jack or S-Video Jack

Auto

The projector automatically detects an incoming video system, and adjusts itself to optimize its performance.

PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N

If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.

AV SYSTEM MENU (VIDEO OR S-VIDEO)

AV System Menu icon The selected system is displayed

Move the pointer to the desired system and press the SELECT button.

Y, Pb/Cb, Pr/Cr Jacks

Auto

The projector automatically detects an incoming video signal, and adjusts itself to optimize its performance. When the Video System is 1035i or 1080i, select the system manually.

COMPONENT VIDEO SIGNAL FORMAT

If the projector cannot reproduce proper video image, select a specific component video signal format from among 480i, 575i, 480p, 575p, 720p, 1035i, and 1080i.

✔Note:

• The AV System menu cannot be selected when selecting RGB(Scart).

AV SYSTEM MENU (COMPONENT VIDEO)

AV System Menu icon The selected system is displayed.

Move the pointer to the desired system and press the SELECT button.

Page 42

Video Input

Image Level Selection

Direct Operation

Press the IMAGE SEL. button on the remote control to select the desired image level.

Standard

Cinema

Image1

•

Image 10

Menu Operation

Press the MENU button to display the On-Screen Menu.

Use the Point 7 8 buttons to move the red frame pointer to the Image Select Menu icon.

Remote Control

IMAGE SEL.

button

IMAGE SELECT MENU

Use the Point ed buttons to move the red frame pointer

to the desired image level and then press the SELECT button.

Standard

Normal picture level preset on the projector.

Cinema

Picture level adjusted with fine tone.

IMAGE 1–10

User preset picture adjustment in the Image Adjust Menu. (p. 47)

Image Select Menu icon

Move the red frame pointer to the desired level and press the SELECT button.

Page 43

Screen Size Adjustment

Video Input

Press the MENU button to display the On-Screen Menu.

Use the Point 7 8 buttons to move the red frame pointer to the Screen Menu icon.

Use the Point ed buttons to move the red frame pointer

to the desired function and then press the SELECT button.

Normal

Provide the image at the normal video aspect ratio of 4:3.

Wide

Provide the image at the wide screen ratio of 16:9.

Custom

Scale H/V .............. Adjust the Horizontal/Vertical screen scale.

H&V ...................... When set to “On,” the aspect ratio is

fixed. The “Scale V” appears dimmed and becomes unavailable. Adjust “Scale H,” then the screen scale is automatically modified based on the aspect ratio.

Position H/V .......... Adjust the Horizontal/Vertical screen

position.

Common .............. Save the adjusted scale to all the inputs.

Press the SELECT button at Common to display a confirmation box. To save the scale, press the SELECT button at “Yes.” When Custom is selected, the saved scale is used.

Reset .................... Reset the all adjusted values. Press

the SELECT button at Reset to display a confirmation box. To reset, press the SELECT button at “Yes.”

SCREEN MENU

Screen Menu icon

Move the red frame pointer to the desired function and press the SELECT button.

✔Note:

• Wide cannot be operated when “720p,” “1035i,” or “1080i” is selected on AV System Menu (p.41).

Press the SELECT button at Common or Reset, to display a confirmation box.

✔Note:

• When no signal is detected, “Normal” is set automatically and the Aspect dialog box disappears.

• The adjustable range for Scale H/V and Position H/V is limited depending on the input signal.

Page 44

Video Input

Keystone

This function is used to store or reset the keystone correction when the Main On/Off Switch is pressed to Off or the AC

power cord is unplugged. Use the Point 7 8 buttons to switch between each option. Store. . . Keep the keystone correction even when the Main

On/Off Switch is pressed to Off or the AC power cord is unplugged.

Reset . . Release the keystone correction when the Main On/

Off Switch is pressed to Off or the AC power cord is unplugged.

To correct keystone distortion, press the Select button. The Keystone dialog box appears. Use the Point ed7 8 buttons to

correct keystone distortion. (p.30)

Ceiling

When this function is set to “On,” the picture is top/bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector.

SCREEN MENU

Move the red frame pointer to a function and press the SELECT button.

Ceiling

Rear

When this function is set to “On,” the picture is left/right reversed. This function is used to project the image from the rear of the screen.

Reset

This function returns all adjusted values to the factory default settings. Press the SELECT button at Reset to display a confirmation box. To reset, press the SELECT button at “Yes.”

Quit

Exit the Screen Size Adjustment Menu.

Page 45

Image Adjustment

Picture Image

Press the MENU button to display the On-Screen Menu.

Use the Point 7 8 buttons to move the red frame pointer to the Image Adjust Menu icon.

Use the Point ed buttons to move the red frame pointer

to the desired item and then press the SELECT button to display the adjustment dialog box. Use the Point 7 8

buttons to adjust the setting value.

Contrast

Press the Point 7 button to decrease contrast; press the Point 8 button to increase the contrast (from 0 to 63).

Brightness

Press the Point 7 button to decrease the brightness; press the Point 8 button to increase the brightness (from 0 to 63).

✽

Color

Press the Point 7 button to decrease the intensity of the color; press the Point 8 button to increase the intensity of the color

(from 0 to 63).

✽

Tint

Press the Point 7 8 buttons to adjust the tint value to obtain proper color balance (from 0 to 63).

IMAGE ADJUST MENU

Image Adjust Menu icon

Move the red frame pointer to the desired item and then press SELECT button.

Color Management

The Color Management function can be used to adjust the LEVEL, PHASE, and GAMMA of the selected display colors (except for black, white, and gray) on the screen and replace these colors with other colors if required. You can store up to eight (8) color management data.

Use the Point ed buttons to move the red frame pointer

to Color Management, and then press the SELECT button. The projected image freezes, and the COLOR MANAGEMENT POINTER appears.

Use the Point ed7 8 buttons to move the pointer to the

spot where you want to adjust the color and then press the SELECT button. The COLOR SELECTION window appears, and the color in the center of the pointer is selected and you can adjust the color.

Use the Point ed7 8 buttons to adjust the LEVEL and

PHASE of the color, and then press the SELECT button to confirm the setting. Then use the Point ed buttons to

adjust the GAMMA for the color and press the SELECT button to accept the setting. After adjusting, press the SELECT button to go to the COLOR MANAGEMENT LIST.

COLOR SELECTION MODE

Use the Point 7 8 buttons to adjust the setting value.

POINTER MODE

COLOR MANAGEMENT POINTER

✔Note:

✽ Displayed in grayout in the computer Input.

• Tint cannot be selected when the video system is PAL, SECAM, PAL-M, or PAL-N (p.41).

• Color management is displayed in grayout when there is no signal .

LIST

Go to the COLOR MANAGEMENT LIST.

Page 46

Picture Image

COLOR SELECTION MODE (continued)

COLOR M.

Return to the COLOR MANAGEMENT POINTER. (If you press the MENU button on the side control or the remote control, it returns to the COLOR MANAGEMENT POINTER and you will need to reselect and readjust the color.)

Return to the IMAGE ADJUST Menu. Any settings that have been changed will not be stored. To store the changed settings, be sure to select “LIST” and go to the COLOR MANAGEMENT LIST.

In the COLOR MANAGEMENT LIST, the adjusted color

data are checkmarked. You can decide whether or not to apply the adjusted color data in the list to the projected image (see below).

LIST MODE

Clear the check mark if you do not want to apply the adjusted color data; select the check mark and then press the SELECT button. The check mark disappears.

COLOR PALETTE

Return to the COLOR SELECTION mode so that you can readjust the setting for the color in that line. (This option is not available if the check mark is cleared.)

COLOR SELECTION MODE

Level and phase adjustment palette.

LIST COLOR M. MENU

Gamma adjustment palette.

LIST MODE

COLOR PALETTE

DEL

Select the DEL box if you want to delete the adjusted data. Press the SELECT button and a confirmation box appears and then select [Yes].

ALL DEL

Delete all the data in the list. Press the SELECT button and a confirmation box appears and then select [Yes].

The same function as stated above.

COLOR M.

The same function as stated above.

Auto picture control

Use the Point 7 8 buttons to select the desired Auto picture control position (Off, L1 or L2).

Off . . . . Auto picture control OFF position.

L1 . . . . . Auto picture control LEVEL 1 position.

L2 . . . . . Auto picture control LEVEL 2 position.

Color temp.

Use the Point 7 8 buttons to select the desired Color temp. level (XLow, Low, Mid, or High).

ALL DEL MENU COLOR M.

Page 47

White balance (Red/Green/Blue)

Press the Point 7 button to lighten red/green/blue tone; press the Point 8 button to deepen red/green/blue tone (from 0 to 63).

Offset (Red/Green/Blue)

Press the Point 7 button to lighten red/green/blue tone of the black level of an image; press the Point 8 button to deepen red/

green/blue tone of the black level of an image (from 0 to 63).

Picture Image

Sharpness

Press the Point 7 button to decrease the sharpness of the image; press the Point 8 button to increase the sharpness of the image

(from 0 to 31).

Gamma

Use the Point 7 8 buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15).

Noise reduction

✽

Noise interference on the screen can be reduced. Press the Point 7 8 buttons to change the noise reduction mode.

Off . . . . Noise reduction mode is “Off”

On . . . . Noise reduction mode is “On”

Progressive

✽

An interlaced video signal can be displayed in progressive mode. Press the Point 7 8 buttons to change the progressive scan mode.

Off . . . . Progressive scan mode is “Off.”

On . . . . Progressive scan mode is “On.”

Film . . . For watching a film. With this function, the projector

reproduces pictures faithful to the original film quality.

✔Note:

•Picture is distorted at the moment of On/Off /Film switching.

Press the SELECT button at this icon to display other items.

Press the SELECT button at this icon to display the previous items.

Press the Point adjust the setting value.

7 8 buttons to

Reset

To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select [Yes]. All adjustments will return to their previous figures.

Store

To store the adjusted data, move the red frame pointer to the Store icon and press the SELECT button. The Image Level Menu appears. Move the red arrow pointer to any of the Image 1 to 10 in which you want to set and press the SELECT button. A confirmation box appears and then select [Yes].

Quit

Exit the Image Adjust Menu.

✔Note:

✽ Displayed in grayout in the computer Input.

• When the White balance Red, Green, or Blue is adjusted, the Color temp. level will change to “Adj.”

• The Film mode in the Progressive function cannot be selected when the video signal format is 1080i or 1035i.

• Progressive cannot be selected when “480p,” “575p,” or “720p” is selected (p.41).

Image Level Menu Move the red frame pointer to an image item to be set and then press the SELECT button.

Store icon Press the SELECT button at this icon to store the adjustment.

Page 48

Setting

This projector has a Setting menu that allows you to set up other various functions.

Press the MENU button to display the On-Screen Menu.

Use the Point 7 8 buttons to move the red frame pointer to the Setting Menu icon.

Use the Point ed buttons to move the red frame pointer

to the desired item and then press the The Setting dialog box appears.

Language

The language used in the On-Screen Menu is available in English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Russian, Chinese, Korean, or Japanese.

This function allows you to adjust the position of the On-Screen Display and the value adjustment bar in the Picture Image Adjustment Menu.

SELECT button.

SETTING MENU (Language)

Set the red frame pointer to the item and press the SELECT button.

Setting Menu icon

Position

This function is used to adjust the On-Screen Menu display position. Press the SELECT button and the adjustment

screen appears (arrows appear). Use the Point ed7 8 buttons to adjust the position. After making the adjustment, press the SELECT button to return to the Menu screen.

Simple menu

When this function is set to “On,” the value adjustment bar in the Picture Image Adjustment Menu appears on the screen.

Display

This function decides whether to display On-Screen Displays.

On . . . . . . . . . . . . Show all the On-Screen Displays. Use this

function when you want to project images after the lamp becomes bright enough. The factory default setting is in this option.

Countdown Off. . . Show the input image instead of the

countdown when turning on the projector. Use this function when you want to project the image as early as possible even when

the lamp is not bright enough.

Off . . . . . . . . . . . . Hide the On-Screen Displays except:

l On-Screen Menu l “Power off?” (p.24) l Color management operation screen

(pp.45-46) l “No signal” for Power management (p.52) l P-TIMER (p.30)

l ”Please wait....” for Auto PC adjustment

(p.35) l

Background

The selected background screen will be displayed when no input signal is detected. Blue . . . Blue colored background. User . . . The image you captured. Black. . . Black colored background.

Arrows for panning mode

Press the SELECT button at Language, then the Language Menu appears.

Set the red frame pointer to the item and press the SELECT button.

✔Note:

• “User” cannot be selected when the image is not captured.

Page 49

Setting

Logo

This function allows you to customize the screen logo with Logo select, Capture, and Logo PIN code lock functions.

✔Note:

• When “On” is selected in the Logo PIN code lock function, Logo select and Capture functions cannot be selected.

Logo select

This function decides on the starting-up display from among the following options. User . . . Show the image you captured. Default . Show the factory-set logo.

Off . . . . Show the countdown display only.

Capture

This function enables you to capture an image being projected to use it for a starting-up display or interval of presentations.

Select Capture and press the SELECT button. A confirmation box appears and select [Yes] to capture the projected image.

After capturing the projected image, go to the Logo select function and set it to “User”. Then the captured image will be displayed the next time you turn on the projector.

Logo

Set the red frame pointer to the item and press the SELECT button.

Capture

To cancel the Capture function, select [No].

✔Note:

• Before capturing an image, select “Standard” in the Image

Select Menu to capture a proper image. (pp. 38, 42)

• A signal from a computer can be captured up to XGA (1024

x 768).

•Certain signals may not be captured properly.

• When capturing the image that has been adjusted by the

Keystone function, the adjusted data is automatically reset and the projector captures an image without keystone correction.

• When starting to capture a new image, the previously

stored image is cleared even if you cancel the capturing.

• Once you exit the Logo Menu after setting the Logo lock

to "On," you are required to enter the PIN code every attempting to change the Logo setting.

• “User” cannot be selected when the image is not captured.

Set the pointer (red arrow) to the item and press the SELECT button.

Select [Yes] to capture the projected image.

Select [Yes] to stop capturing.

Page 50

Setting

Logo PIN code lock

This function prevents an unauthorized person from changing the screen logo.

Off . . . . The screen logo can be changed freely from the

Logo Menu.

On . . . . The screen logo cannot be changed without a

Logo PIN code.

If you want to change the Logo PIN code lock setting, press the SELECT button and the Logo PIN code dialog box appears. Enter a Logo PIN code by following the steps below. The initial Logo PIN code is set to “4321” at the factory.

Enter a Logo PIN code

Use the Point ed buttons on the side control or on the remote control to enter a number. Press the Point

8 button to fix the number and move the red frame

pointer to the next box. The number changes to “✳.” Repeat this step to complete entering a four-digit number. After entering the four-digit number, move the pointer to “Set.” Press the SELECT button so that you can change the Logo PIN code lock setting.

If you fixed an incorrect number, use the Point 7 button to move the pointer to the number you want to correct, and then enter the correct number.

If you entered an incorrect Logo PIN code, “Logo PIN code” and the number (✳✳✳✳) will turn red for a moment. Enter the correct PIN code all over again.

Logo PIN Code Lock

Enter a Logo PIN code

After a correct Logo PIN code is entered, the following dialog box appears.

Change the Logo PIN code lock setting

Use the Point 7 8 buttons to switch On/Off,

Change the Logo PIN code

Change the Logo PIN code lock setting

Use the Point 7 8 buttons to switch On/Off, and then press the Point d button to move the pointer to “Quit.” Press the SELECT button to close the dialog box.

Change the Logo PIN code

Logo PIN code can be changed to your desired four-digit number. Press the Point d button to select “Logo PIN code change” and then press the SELECT button. The New Logo PIN code input dialog box appears. Set a new Logo PIN code.

Be sure to note the new Logo PIN code and keep it on hand. If you lost the number, you could no longer change the Logo PIN code setting. For details on PIN code setting, refer to “PIN code lock” on pages 53–54.

CAUTION: WHEN YOU HAVE CHANGED THE LOGO PIN CODE, WRITE DOWN THE NEW PIN CODE IN COLUMN OF THE LOGO PIN CODE NO. MEMO ON PAGE 80, AND KEEP IT SECURELY. SHOULD THE LOGO PIN CODE BE LOST OR FORGOTTEN, THE LOGO PIN CODE SETTING CAN NO LONGER BE CHANGED.

Page 51

Lamp mode

This Projector is equipped with 2 Projection Lamps and the number of using lamps can be switched to 2 lamps or 1 lamp. Using 1 lamp maintains the life of Projection Lamps.

To change over Lamp Mode

Set "2 lamps mode" or "1 lamp mode" by pressing the Point buttons. When the Lamp Mode is switched from "2 lamps mode" to "1 lamp mode", the image becomes a little darker. When the Lamp Mode is switched from "1 lamp mode" to "2 lamps mode", the image becomes brighter gradually.

Lamp control

This function allows you to change the brightness of the screen.

Auto . . . . . Brightness according to the input signal.

Normal . . . Normal brightness.

Eco . . . . . . Lower brightness. Lower brightness reduces

the lamp power consumption and extends the lamp life.

7 8

Setting

✔Note:

• When neither of the two lamps is lighted, the projector will shutdown automatically.

• When either of the two lamps does not light up, the LAMP 1/2 REPLACE indicator blinks orange and the projector will light the other automatically.

• After changing the Lamp Mode, it cannot be switched again for 90 seconds.

Filter control

You can replace the filter with this function. Press the SELECT button at Filter control to display a confirmation box. To replace, press the SELECT button at “YES” and the electrically operated filter starts to scroll.

You can also replace the filter by using the remote control (p. 30).

Fan control

Choose the running speed of cooling fans from the following options.

Normal ....... Normal speed.

Max ........... Faster than the normal speed.

✔Note:

• Filter replacement icon and “Please wait...”

message appear on the screen when the filter is being scrolled.

•

The filter cannot be rewound.

• When the filter is replaced, the total accumulated time of the filter use is automatically set to 0.

Page 52

Setting

Remote control

The eight different remote control codes (Code 1–Code 8) are assigned to the projector; the factory-set, initial code (Code 1) and the other seven codes (Code 2 to Code 8).

The same code should be set on both the projector and the remote control. For example, operating the projector in “Code 7”, the remote control code also must be switched to “Code 7”.

To change the code for the projector; Select a remote control code in this Setting Menu.

To change the code for the remote control;

Check the Reset Switch to "Use position" in the compartment lid on the back of the remote control. And then while holding down the MENU button, press and release the IMAGE ADJ. button the number of corresponding times you would like to set the number of the remote control code for the projector. (See page 16)

Remote control

When pressing the SELECT button at Remote control, the Remote control code menu appears.

To reset the code for the remote control;

Slide the Reset Switch to "Reset position" in the compartment lid on back of the remote control.

RC sensor

Select a location of the infrared remote receiver of the remote control. See “Remote Control Receivers and Operating Range” on page 15 for details.

Both ......... Activate both the front and back receiver.

Front ........ Activate only the front receiver.

Back ......... Activate only the back receiver.

Power management

For reducing power consumption as well as maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not used for a certain period.

If the input signal is interrupted and no button is pressed for more than 30 seconds, the timer display with “No signal” appears. It starts the countdown until the lamp is turned off. The countdown time can be set between 1 and 30 minutes.

Use the Point 7 8 buttons to set the countdown timer.

Select one of the following options:

Ready . . . . When the lamp has been fully cooled down, the

READY indicator starts blinking. In this condition, the projection lamp is turned on if the input signal is reconnected or any button on the side control or remote control is pressed .

Shutdown . . When the lamp has been fully cooled down, the

power is turned off.

Off . . . . . . . Power Management function is off.

✔Note:

•Factory default is “Ready: 5 min.”

• When the shutter is closed while the Power management function is working, the Power management function is released.

Power management

Time left before the lamp is off

Press the SELECT button at Power management and the dialog box appears. Use the Point 7 8 buttons to choose one of the three options. Press the Point d button to select the timer, and then use the Point 7 8 buttons to set the timer

Page 53

On start

When this function is set to “On,” the projector will be automatically turned on just by connecting the AC power cord to the wall outlet.

✔Note:

• Make sure that the MAIN ON / OFF switch is ON, otherwise the On start function does not work.

• Be sure to turn off the projector properly (see “Turning Off the Projector” on page 24). If the projector is turned off in the incorrect sequence, the On start function does not work properly.

Setting

Security

Key lock

This function locks the side control and remote control buttons to prevent operation by unauthorized persons.

. . . . . Unlocked.

. . . . . Lock the side control buttons.

To unlock, use the remote control.

. . . . . Lock the remote control buttons.

To unlock, use the side control.

If the side control accidentally becomes locked and you do not have the remote control nearby and unable to operate the projector, contact the service station.

PIN code lock

This function prevents the projector from being operated by unauthorized persons and provides the following setting options for security.

Off . . . . Unlocked.

On1 . . . Enter the PIN code every time turning on the

projector.

On2 . . . Enter the PIN code to operate the projector once

the Main On/Off Switch is pressed to Off or the power cord is unplugged ; as long as the AC power cord is connected and the Main On/Off Switch is pressed to ON, the projector can be operated without a PIN code.

Security

Set the red frame pointer to the item and press the SELECT button.

Key lock

Select Key lock and this box appears. Choose one of the alternatives with the Point ed buttons and select [Yes] to activate it.

PIN code lock

Whenever you change the PIN code lock setting or the PIN code (the four-digit number), you are required to enter the PIN code. “1234” is set as the initial PIN code at the factory.

If you want to change the PIN code lock setting, press the SELECT button and the PIN code dialog box appears. Enter a PIN code by following the steps on the next page.

When the projector is locked with a PIN code, the PIN code lock symbol appears on the menu bar.

Page 54

Setting

Enter a PIN code

Use the Point ed buttons on the side control or on the remote control to enter a number. Press the Point 8 button to fix the number and move the red frame pointer to the next box. The number changes to “✳.” Repeat this step to complete entering a fourdigit number. After entering the four-digit number, move the pointer to “Set.” Press the SELECT button so that you can change the PIN code lock setting .

If you fixed an incorrect number, use the Point 7 button to move the pointer to the number you want to correct, and then enter the correct number.

If you entered an incorrect PIN code, “PIN code” and the number (✳✳✳✳) will turn red for a moment. Enter the correct PIN code all over again.

Change the PIN Code Lock setting

Use the Point 7 8 button to select Off, On1, or On2 and then move the pointer to “Quit” with the Point d button. Press the SELECT button to close the dialog box.

Change the PIN Code

The PIN code can be changed to your desired four-digit number. Press the Point d buttons to select “PIN code change” and press the SELECT button. The New PIN code input dialog box appears. Set a new PIN code.

CAUTION: WHEN YOU HAVE CHANGED THE PIN CODE, WRITE DOWN A NEW PIN CODE IN COLUMN OF THE PIN CODE NO. MEMO ON PAGE 80, AND KEEP IT SECURELY. IF YOU FORGET YOUR PIN CODE, THE PROJECTOR CAN NO

LONGER BE STARTED.

Enter a PIN code

After a correct Logo PIN code is entered, the following dialog box appears.

Change the PIN code lock setting

Use the Point 7 8 buttons to switch between the options.

Change the PIN code

Projector ID

This feature allows users to set serial communication configuration (Projector ID) when several projectors are connected via the RS-232C terminal (serial port) of the projector.

Use the Point 7 8 buttons to adjust the Projector ID.

l Projector ID ... 1 - 999. (Factory default setting : Projector ID 1)

Page 55

Shutter

Shutter function is available to block out light to the screen, so that the screen can be used for the other presenters.

Protection

Prohibits the shutter operation from the remote control and the projector's side control.

Remote control Selecting "On" prohibits the shutter

operation from the remote control.

Projector . . . Selecting "On" prohibits the shutter

operation from the side control.

It is possible to prohibit the shutter operation from both of

the remote control and the side control.

Management

Setting

The Shutter Management function turns off the projection lamp when the projector is left with the shutter closed and the set time has passed away. The count-down time can be set between 5 and 180 minutes. When the count-down time has elapsed, the shutter will be opened up automatically and the lamp will be turned off to cool itself down. The SHUTTER indicator is blinking blue during this cooling-off period. When the lamp has been fully cooled down, the READY indicator turns green lighting and the SHUTTER indicator keeps blinking. Should the ON / STAND-BY button be pressed in this condition, the projection lamp will be turned on and the SHUTTER indicator turns off.

Lamp counter

This function is used to reset the lamp counter.

When the lamp life reaches a recommended lamp replacement time, the time shown in the dialog box turns red and the Lamp

replacement icon appears on the screen, indicating that the end of lamp life is approaching.

When replacing the projection lamp, reset the lamp counter. See “Resetting the Lamp Counter” on page 62.

✔Note:

• The Factory default value is set to 180 minutes for the count down time.

• The Shutt er Ma nag eme nt fu nct ion cannot be halted.

This icon appears on the screen when the end of lamp life is approaching.

✔Note:

• This icon also appears at turning on and selecting

input source.

✔Note:

• The Lamp replacement icon will not appear when the Display function is set to “Off” (p.48), or during “Freeze” (p.29).

Page 56

Setting

Filter counter

This function is used to set a time for the filter replacement.

Use the Point ed buttons to move the red frame pointer to Filter counter and then press the SELECT button. A dialog box appears showing the Used time option and the Scrolls remaining option.

Used Time . . . . . . Show the total accumulated time of the

filter use, timer setting option and the Reset options. When the projector reaches a time set in the timer setting, the Filter replacement icon (Fig. 1) appears on the screen and the total accumulated time turns red, indicating that the filter replacement is necessary. If the filter is out of scroll and the projector reaches a time set in the timer setting, Fig. 2 appears on the screen, indicating that the filter cartridge replacement is necessary.

Scrolls remaining

. . Show the scroll counter and the Reset

options. When the filter scroll is counted down to 1 (Scroll counter on the screen is showing “0 scroll(s)” , the last scroll icon

(Fig. 3) appears on the screen. When the filter scroll is counted down to 0, the Filter cartridge replacement icon (Fig. 4) appears on the screen and the WARNING FILTER indicator lights orange, indicating that the filter cartridge replacement is necessary.

Filter counter

Set the red frame pointer to the item and press the SELECT button.

Use the Point 7 8 buttons to set the timer. Select from (Off/ 400H/700H/1000H) depending on the use environment

Fig.1 Filter replacement icon

Filter replacement icon appears on the screen at a set time.

Fig.2

Fig.3 Last scroll icon

Last scroll icon appears on the screen when the filter is down to the last scroll.

To set a timer, press the SELECT button on Used time option. Move the red arrow pointer to the timer setting option and use the Point 7 8 buttons to select from (Off/ 400H/700H/1000H)

depending on the use environment.

When replacing the Filter cartridge, reset the Filter counter and the Scroll counter (p.59).

✔Note:

• Do not reset the Filter counter and the Scroll counter without replacing the Filter cartridge. Be sure to reset the Filter counter and the Scroll counter only after replacing the Filter cartridge.

• Timer setting notifies that the filter needs replacement. To replace the filter, use the filter control function (p.51).

Test pattern

Various test pattern are available for use when setting up the projector.

Factory default

This function returns all setting values except for the user logo, PIN code lock, Logo PIN code lock, lamp counter, filter counter and filter timer to the factory default settings.

Quit

Exit the Setting Menu.

Fig.4 Filter cartridge replacement icon

Filter cartridge replacement icon appears on the screen when the filter scroll is counted down to 0 scroll.

✔Note:

• Fig.1, Fig. 2, Fig. 3 or Fig. 4 will appear at turning on

and selecting input source.

• Fig.1, Fig. 2, Fig. 3 or Fig. 4 will not appear when the Display function is set to “Off” (p.48), or during “Freeze” (p.29).

Factory default

Set the red frame pointer to the item and press the SELECT button.

Select Factory default and this box appears. Select [Yes], and the next box appears.

Select [Yes] to activate it.

Page 57

Maintenance and Care

Filter Instructions

Filter prevents dust from accumulating on the optical elements inside the projector. Should the filter becomes clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup and adversely affect the life of the projector. This projector has an electrically operated filter which helps you to replace the filter easily. The projector monitors the condition of the filter at all time and replaces a filter with a new one automatically when it detects the clogging.

If the projector reaches a time set in the timer setting (p.

56), a Filter replacement icon (Fig.1) appears on the screen and the WARNING FILTER indicator on the top panel lights up (p.74). When you see this icon, replace the filter as soon as possible (pp.30, 51). If the filter is out of scroll and the projector reaches a time set in the timer setting, Fig. 2 appears on the screen, indicating that the filter cartridge replacement is necessary.

When the filter scroll is counted down to 1, the Last scroll icon (Fig.3) appears on the screen, indicating that there is one scroll left in the filter cartridge (p.56).

If the projector detects that the filter is clogged and no scroll is left in the filter cartridge, a Filter cartridge replacement icon (Fig. 4) appears on the screen and the WARNING FILTER indicator on the top panel lights up (p.74). When you see this icon, replace the filter cartridge (p.58) and reset the Filter counter (p.59) and the Scroll counter (p.59).

Fig.1 Filter replacement icon

Fig.2

Fig.3 Last scroll icon

When the filter is being scrolled by the remote control (p.30) or the Filter control function in the setting menu (p.51), a Filter replacement icon and “Please wait...” message (Fig.5) appear on the screen and the WARNING FILTER indicator blinks slow (approx. 2 seconds ON, 2 seconds OFF) (p.72).

The WARNING FILTER indicator blinks fast when the projector detects an abnormal condition, the filter cartridge is not installed properly, or the filter scroll is not working properly (p.74).

✔Note:

• Fig.1, Fig.2, Fig.3 or Fig. 4 will not appear when the Display function is set to “Off” (p.48), or during “Freeze” (p.29).

• The filter cannot be rewound.

• The filter can be scrolled 9 times since the filter cartridge has 10 scrolls.

• The filter cartridge is disposable. Do not clean and reuse the filter cartridge.

• Do not expose the filter cartridge to water or liquid, or it may cause a breakdown.

• Replace the filter cartridge after all the scroll is used up. If you replace the filter cartridge when there are some scrolls left in the filter cartridge, the filter counter and the scroll counter do not recognize the correct number of remaining scrolls and the reset function cannot work properly. It may cause a breakdown.

• The used part of the filter can be seen on the edge of the Filter cartridge after scrolling the filter, but there is no problem for the use of the projector.

Fig.4 Filter cartridge replacement icon

Fig.5 Filter replacement icon and

“Please wait...” message.

• Do not use the filter cartridge with other projector. The filter counter and the scroll counter do not recognize the correct number of remaining scrolls of the used filter cartridge and the reset function cannot work properly. It may cause a breakdown.

• Make sure that the projection lamps are turned off when you are replacing the filter cartridge. If you replace the filter cartridge when the projection lamps are turned on, the projector will be shut down automatically for safety purposes.

• Do not forget to reset the filter counter and the scroll counter in the setting menu after replacing the filter cartridge. If you forget to reset the filter counter and the scroll counter, the projector cannot recognize the correct number of remaining scrolls and it may cause a breakdown.

• When the projector is kept used for 3 minutes without getting the filter cartridge replaced after the Fig.4 appears on the screen, the projector is turned off automatically to prevent the damage of optical components.

Page 58

Maintenance and Care

Replacing the Filter Cartridge

Turn off the projector, press the Main On/Off Switch to

Off and unplug the AC power cord from the AC outlet.

First, clean up the dust on the projector and around the

air vents.

Slide and open the Filter cover. (See the right figure.)

Pull out the filter cartridge by holding the finger grip.

Put the new one back into the position and close

the filter cover. Make sure that the filter cartridge is properly and fully inserted.

Connect the AC power cord to the projector and turn

on the projector.

Reset the filter counter and the scroll counter (p.59).

Filter cover

Filter cartridge

CAUTION

Make sure the filter cartridge is inserted in the projector. If the filter cartridge is not inserted, the projector cannot be turned on. Do not put anything into the air vents. Doing so may result in malfunction of the projector.

RECOMMENDATION

We recommend avoiding dusty/smoky environments when operating the projector. Usage in these environments may cause a poor image quality.

When using the projector under dusty or smoky conditions, dust may accumulate on a lens, liquid crystal panels, or optical elements inside the projector. Such condition may degrade the quality of the projected image. When the symptoms above are noticed, contact your authorized dealer or service station for proper cleaning.

ORDER REPLACEMENT FILTER CARTRIDGE

Replacement filter cartridge can be ordered through your dealer. When ordering, give the following information to the dealer.

l Model No. of your projector

PLC-XF71

l Replacement Filter Cartridge

Type No. : POA-FIL-180

(Service Parts Code: 610 335 9830)

Page 59

Maintenance and Care

Resetting the Filter Counter

Be sure to reset the Filter counter after replacing the filter cartridge.

Press the MENU button to display the On-Screen Menu. Use

the Point 7 8 buttons to move the red frame pointer to the Setting Menu icon.

Use the Point ed buttons to move the red frame pointer to

Filter counter and then press the SELECT button. A dialog box appears showing the Used time option and the

Scrolls remaining option. Use the Point ed buttons to select Used time.

Used time shows the total accumulated time of the filter

use, a timer setting option, and the Reset option. Select Reset and the “Filter counter Reset?” appears. Select [Yes] to continue.

Another confirmation dialog box appears, select [Yes] to

reset the Filter counter.

Filter counter

Select “Used time” and the dialogue box below appears.

Select Reset and the “Filter counter Reset?” appears.

Select [Yes], then another confirmation box appears.

Select [Yes] again to reset the Filter counter.

Resetting the Scroll Counter

Be sure to reset the Scroll counter after replacing the filter cartridge.

Press the MENU button to display the On-Screen Menu. Use

the Point 7 8 buttons to move the red frame pointer to the Setting Menu icon.

Use the Point ed buttons to move the red frame pointer to

Filter counter and then press the SELECT button. A dialog box appears showing the Used time option and the Scrolls

remaining option. Use the Point ed buttons to select Scroll(s) remaining.

Scroll(s) remaining shows the number of the remaining

scrolls and the Reset option. Select Reset and the “Scroll counter Reset?” appears. Select [Yes] to continue.

Another confirmation dialog box appears, select [Yes] to

reset the Scroll counter.

✔Note:

• While the scroll counter reset is in progress, ‘‘Please wait...’’ message appears on the screen, the cooling fans operate and the filter cartridge is adjusted.

Scroll counter

Select “Scrolls remaining” and the dialogue box below appears.

Select Reset and the “Scroll counter Reset?” appears.

Select [Yes], then another confirmation box appears.

Select [Yes] again to reset the Scroll counter.

Page 60

Maintenance and Care

Lamp Management

This Projector is equipped with 2 Projection Lamps to ensure brighter image and those lamps are controlled by the Lamp Management Function. The Lamp Management Function detects the status of lamps and shows the status on screen or on the LAMP 1/2 REPLACE indicators. This function also automatically controls the Lamp Mode when any of lamps is out for the end of life or malfunctions.

LAMP 1/2 REPLACE INDICATORS

Lamp mode

Lamp 1/2 Replace Indicators

The LAMP 1/2 REPLACE indicators light orange when any of Projection Lamps is nearing its end, and flash when any of them becomes out. Check the number of lamp on the Lamp Status Display or the LAMP 1/2 REPLACE indicators and replace the lamp.

Lamp Status Display

The Lamp Status Display appears on screen when the projector is turned on or the input position (input 1, input 2, Input 3 or input 4) is switched. This shows the status of each lamp as; ON, OFF, NEAR END, or OUT. Refer to the following for each status.

Yellow Lamp

Dim Lamp

Red Lamp

LAMP STATUS DISPLAY

X Mark on Lamp

Projection Lamp lights normally.

Projection Lamp is turned off.

Projection Lamp is nearing its end. When the image becomes darker or the color becomes unnatural, replace lamp. (LAMP 1/2 REPLACE indicator lights orange.)

(LAMP 1/2 REPLACE indicator flashes orange.) Projection lamp is defective or fails to be turned on. Restart the projector on, and make sure lamp is on. If this mark still appears, replace lamp corresponding with number marked X.

Lamp Mode Changeover

The Lamp Management Function automatically changes the lighting lamp (Lamp Mode) by detecting the status of lamp. When either of the 2 lamps is out, the projector operates with 1 lamp. The Lamp Mode can be switched to 2 lamps or 1 lamp manually. Refer to the SETTING section on page 51

2 LAMP MODE

1 LAMP MODE

When Lamp 1 is burnt out.

When Lamp 2 is burnt out.

Page 61

Maintenance and Care

Lamp Replacement

When the projection lamp of the projector reaches its end of life, the Lamp replacement icon appears on the screen and LAMP 1/2 REPLACE indicator lights orange. Replace the lamp with a new one promptly. The timing when the LAMP 1/2 REPLACE indicators should light is depending on the lamp mode.

Indicators

Lamp replacement icon

LAMP 1 / 2 REPLACE indicators

✔Note:

• The Lamp replacement icon will not appear when the Display function is set to “Off” (p.48), or during “Freeze” (p.29).

Follow these steps to replace the lamp.

Check the number of lamp to be replaced on the Lamp

Status Display.

Turn off the projector, press the Main On/Off Switch to Off

and unplug the AC power cord from the AC outlet. Let the projector cool for at least 45 minutes.

Loosen a screw on the Lamp Cover. Slide and open the

Lamp Cover until it makes a clicking sound. (See the right figure.)

Loosen two screws and pull out the Lamp to be replaced

by grasping handle.

Replace the Lamp with a new one and tighten two

screws. Make sure the Lamp is set properly.

WARNING:

TURN OFF THE UV LAMP BEFORE OPENING THE LAMP COVER.

Allow the projector to cool, for at least 45 minutes before you open Lamp Cover. The inside of the projector can become very hot.

CAUTION

For continued safety, replace with a lamp assembly of the same type. Do not drop the lamp assembly or touch a glass bulb! The glass can shatter and may cause injury.

LAMP COVER

SCREW

LAMP 2

Put the Lamp Cover back and tighten a screw.

Connect the AC Power Cord to the projector and turn on

the projector.

Reset the Lamp Replacement Counter. (Refer to section

"Resetting the Lamp Counter" on page 62.)

NOTE : Do not reset LAMP REPLACEMENT COUNTER when

lamp is not replaced.

CAUTION : DO NOT OPERATE THE PROJECTOR WHILE ANY OF LAMPS IS REMOVED. IT MAY RESULT IN

MALFUNCTIONS, FIRE HAZARD, OR OTHER ACCIDENTS.

SCREWS

Make sure which number of lamp needs to be replaced on Lamp Status Display. Figure shows case of replacing LAMP 1.

LAMP 1

NOTES ON LAMP REPLACEMENT

To maintain quality of picture (better balance of color and brightness in entire screen), we recommend replacing both 2 lamps at a time.

Page 62

Maintenance and Care

Resetting the Lamp Counter

Be sure to reset the Lamp counter after the lamp is replaced. When the Lamp counter is reset, the LAMP 1/2 REPLACE indicator stops lighting and the Lamp replacement icon disappears.

Press the MENU button to display the On-Screen Menu.

Use the Point 7 8 buttons to move the red frame pointer to the Setting Menu icon

Use the Point ed buttons to move the red frame pointer

to Lamp counter and then press the SELECT button. A dialog box appears. Select a lamp and the “Lamp replacement counter Reset?” appears. Select [Yes] to continue.

Another confirmation dialog box appears and select [Yes]

to reset the Lamp counter.

✔Note:

• Do not reset the Lamp counter without replacing the lamp. Be sure to reset the Lamp counter only after replacing the lamp.

Lamp counter

Select a lamp and the “Lamp replacement counter Reset?” appears.

Select [Yes], then another confirmation box appears.

Select [Yes] again to reset the lamp counter.

ORDER REPLACEMENT LAMP

Replacement Lamp can be ordered through your dealer. When ordering a Projection Lamp, give the following information to the dealer.

l Model No. of your projector : PLC-XF71 l Replacement Lamp Type No. : POA-LMP128

(Service Parts No. 610 341 9497)

Page 63

Maintenance and Care

LAMP HANDLING PRECAUTIONS

This projector uses a high-pressure lamp which must be handled carefully and properly. Improper handling may result in accidents, injury, or create a fire hazard.

l Lamp lifetime may differ from lamp to lamp and according to the environment of use. There is no

guarantee of the same lifetime for each lamp. Some lamps may fail or terminate their lifetime in a shorter period of time than other similar lamps.

l If the projector indicates that the lamp should be replaced, i.e., if the LAMP 1/2 REPLACE indicators

light up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down. (Follow carefully the instructions in the Lamp Replacement section of this manual.) Continuous use of the lamp with the LAMP 1/2 REPLACE indicators lighted may increase the risk of lamp explosion.

l Lamp may explode as a result of vibration, shock or degradation as a result of hours of use as its

lifetime draws to an end. Risk of explosion may differ according to the environment or conditions in which the projector and lamp are being used.

IF A LAMP EXPLODES, THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE TAKEN.

If a lamp explodes, disconnect the projector’s AC plug from the AC outlet immediately. Contact an authorized service station for a checkup of the unit and replacement of the lamp. Additionally, check carefully to ensure that there are no broken shards or pieces of glass around the projector or coming out from the cooling air circulation holes. Any broken shards found should be cleaned up carefully. No one should check the inside of the projector except those who are authorized trained technicians and who are familiar with projector service. Inappropriate attempts to service the unit by anyone, especially those who are not appropriately trained to do so, may result in an accident or injury caused by pieces of broken glass.

Page 64

Maintenance and Care

Cleaning the Projection Lens

Turn off the projector, press the Main On/Off Switch to Off and unplug the AC power cord from the AC outlet before cleaning.

Gently wipe the projection lens with a cleaning cloth that contains a small amount of non-abrasive camera lens cleaner, or use a lens cleaning paper or commercially available air blower to clean the lens.

Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents, or other harsh chemicals might scratch the surface of the lens.

Cleaning the Projector Cabinet

Turn off the projector, press the Main On/Off Switch to Off and unplug the AC power cord from the AC outlet before cleaning.

Gently wipe the projector body with a soft dry cleaning cloth. When the cabinet is heavily soiled, use a small amount of mild detergent and finish with a soft dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents, or other harsh chemicals might scratch the surface of the cabinet.

When the projector is not in use, put the projector in an appropriate carrying case to protect it from dust and scratches.

Page 65

Maintenance and Care

Warning Indicators

The WARNING indicators show the state of the function which protects the projector. Check the state of the WARNING TEMP. indicator and the LAMP indicator to take proper maintenance.

The projector is shut down and the WARNING TEMP. indicator is blinking red.

When the temperature inside the projector reaches a certain level, the projector will be automatically shut down to protect the inside of the projector. The LAMP indicator turns red brighter and the WARNING TEMP indicator blinks while the projector is being cooled down. When the projector has cooled down enough (to its normal operating temperature), it can be turned on again by pressing the ON/ STAND-BY button.

✔Note:

• The WARNING TEMP. indicator continues to blink even after the

temperature inside the projector returns to normal. When the projector is turned on again, the WARNING TEMP. indicator stops blinking.

Then check the matters below:

– Did you provide appropriate space for the projector to be

ventilated? Check the installing condition to see if the air vents of the projector are not blocked.

– Has the projector been installed near an Air-Conditioning/

Heating Duct or Vent? Move the installation of the projector away from the duct or vent.

– Is the filter clean? Replace the filter with a new one.

Indicators

WARNING TEMP. blinking red

The projector is shut down; and the LAMP indicator is lighting and other indicators are blinking.

When the projector detects an abnormal condition, it will be automatically shut down to protect the inside of the projector and the LAMP indicator lights on and other indicators blink. In this case, unplug the AC power cord and plug it, and then turn on the projector once again to verify operation. If the projector cannot be turned on and these indicators are still lighting and blinking, unplug the AC power cord and contact the service station.

CAUTION

DO NOT LEAVE THE PROJECTOR WITH THE AC POWER CORD CONNECTED UNDER AN ABNORMAL CONDITION. IT MAY RESULT IN FIRE OR ELECTRIC SHOCK.

Indicators

LAMP indicator lights on and other indicators blink.

Page 66

Appendix

Troubleshooting

Before calling your dealer or service center for assistance, check the items below once again.

1. Make sure you have properly connected the projector to peripheral equipment as described on pages 20–21.

2. Check the cable connection. Make sure that all computers, video equipment, and power cords are properly connected.

3. Make sure that all power is switched on.

4. If the projector still does not produce an image, restart your computer.

5. If an image still does not appear, disconnect the projector from your computer and check your computer monitor’s display. A problem may be noticed with your graphics controller rather than with the projector. (When you reconnect the projector, be sure to turn the computer and monitor off before you turn on the projector. Turn on equipment in the order of the projector and computer.)

6. If a problem still persists, check the following solutions.

Problem: Solutions

– Plug the power cord of the projector into the AC outlet. – Turn the MAIN ON/OFF switch to ON. – Press the ON/STAND-BY Button to ON.

No power.

– Make sure the READY Indicator lights. – Check the indicators. If the LAMP indicator lights and the other indicators blink, the

projector cannot be turned on. (Refer to page 65.) – Check the projection lamp. (Refer to page 61.)

PIN code dialog box appears at start-up.

The initial display is not shown.

The initial display is not same with the default one.

When the projector is on and you press the input button, an icon other than the Lamp mode icon appears.

An icon other than Input mode or Lamp mode icon appears.

No image.

– PIN code lock is being set. Enter a PIN code; the “1234” or numbers you have set (see

pages 23, 53-54)

– Make sure “Off ” or “Countdown Off” are not chosen at Display function. (See “SETTING” section on page 48)

– Make sure “User” or “Off” are not chosen at Logo select function. (See “SETTING” section on page 49)

– That is the Filter warning icon. Refer to page 56.

– That is the Lamp replacement icon or the Filter warning icon. See page 55-56.

– Check the connection between your computer or video equipment and the projector. – See if the input signal is correctly output from your computer. Some laptop computers

may need to be changed the setting for monitor output when connected to the

projector. See your computer’s instruction manual for the setting. – It takes about 20 seconds to display an image after turning on the projector. – See if the selected system is corresponding with your computer or video equipment. – Select correct input source once again through menu operation (see pages 31, 41-42). – Make sure the temperature is not out of Operating Temperature

40˚C]).

(41˚F–104˚F [5˚C–

Page 67



appears on the screen

The image is out of focus.

Appendix

–

The end of lamp life is approaching. Replace the lamp with a new one promptly.

(See page 55)

–

The filter is out of scroll. Replace the filter cartridge with a new one promptly. (See pages 57-58)

– Adjust the focus of the projector. – Check Projection Lens to see if it needs cleaning.

✔Note: Moving the projector from a cool temperature location to a warm temperature

location may result in moisture condensation on Projection Lens. In such cases, leave the projector OFF and wait until condensation evaporates.

– Projecting from excessive slant angle to the screen may cause keystone distortion and

partial imperfect focus.

The image is not bright enough.

The color is strange. The image is Left/Right

reversed. The image is Top/Bottom reversed.

The image is distorted or runs off.

Auto PC adjustment function does not work.

Some displays are not seen during the operation.

The setting does not remain after turning off power.

Power management function does not work.

Image disappears automatically. Capture function does not work.

Some menus cannot be selected.

–Check if “Contrast” or “Brightness” are adjusted properly. (See page 45) –Check if “Image level” is selected properly. (See pages 38, 42) –Check the Lamp control function. ( See “SETTING” section on page 51) – Check the Lamp 1/2 replace indicators. If it lights, the end of lamp life is approaching.

Replace the lamp with a new one promptly. (See page 61)

– The image is darker when 1 lamp mode is selected, compared with 2 lamp mode.

Check the lamp mode at SETTING section on page 51.

–Check the Input signal, color system, video system, or computer system mode.

– Check the Ceiling / Rear function. (See pages 40, 44.)

– Check the Ceiling function. (See pages 40, 44.)

–Check “PC Adjust” menu or “ Screen” menu and adjust them.

– Check the Input signal. Auto PC Adjustment function cannot work when 480p, 575p,

720p, 480i, 575i, 1035i, or 1080i is selected or when the digital signal is input into DVI terminal. (See page 35)

– Check the Display function (see page 48).

– Make sure you selected “Store” after adjusting settings. Some settings cannot be

stored if not registered with “Store”.

– Power management function cannot work while “Freeze” function is running or the

shutter is closed.

– Check the power management function in the Setting. The power management is set

to "On" at the factory.

–Check the connection to see if there is signal.

–Each of the Video Input and Computer Input has a limit on selectable menus.

Page 68

Appendix

The power is turned off automatically.

You cannot operate with the side control.

The Remote Control does not work.

Indicators blinks or lights.

appears on the screen

– Power management function runs by initial setting. Check “SETTING” section on page

52.

– The side control is not available If the side control is locked at “Key lock” under

“Security” of SETTING section. Please check “SETTING” section on page 53.

–Check the batteries. –Check if the RC sensor is set properly.(See page 52) –Make sure no obstruction is between the projector and remote control. –Make sure you are not too far from the projector when using the remote control. Maximum operating range is 16.4’ (5m). –Make sure that the remote control code conforms to the projector’s code. (See “SETTING” section on page 52.) – Make sure the reset switch in the compartment lid on back of the remote control is set

to use position. –Unlock the Key lock function for the remote control. (See page 53) – Wireless remote control does not work when the remote control cable is connected to

the projector. (See page 15)

– Check the status of the projector with referring to “ INDICATORS AND PROJECTOR

CONDITION” on pages 72-74.

–Your operation is invalid. Operate correctly.

Unable to unlock the Logo PIN code lock, Security key lock or Security PIN

–Contact the dealer where you purchased the projector or the service center.

code lock.

Forget the Logo PIN code or Security PIN code.

–Contact the dealer where you purchased the projector or the service center.

WARNING: High voltages are used to operate this projector. Do not attempt to open the cabinet.

If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Specify the model number and explain about the problem. We will advise you how to obtain service.

This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety standards against risk of fire, casualty, and electrical hazards.

The CE Mark is a Directive conformity mark of the European Community (EC).

Pixelworks ICs used.

Page 69

Menu Tree

Computer Input/Video Input

Input

Input 1

Input 2

RGB (PC analog) Go to System

RGB (Scart)

RGB (PC digital)

RGB (AV HDCP)

RGB

Y, Pb/Cb,Pr/Cr

Video

S-video

Go to System

Appendix

(1)

(3)

(2)

Input 3

Input 4

(For Optional Interface Boards)

Information Image Adjust

Information

Input H-sync freq. V-sync freq. Screen Language Lamp mode Lamp control Power management

Shutter management

Security

Remote control

Remote Control

Projector

5 - 180 Min

Key lock

PIN code lock

Image Adjust

Contrast Brightness Color ✽ Tint ✽

Color management

Auto picture control

Color temp.

Red Green Blue

Offset Red/Green/Blue/Quit

Sharpness Gamma

Progressive ✽

Reset Store

0–63 0–63 0–63 0–63 Color

Gamma

List Color M.

Off/L1/L2

High

XLow Mid

Low Low

Mid

High

Adj.

0–63 0–63 0–63

0–31 0–15

Off/OnNoise reduction ✽

Off/On/Film

Yes / No Image 1

Mid

All Del Low

Color M.

✔Note:

•The Menu display varies depending on the input signal.

Image 10

Quit

✽

Displayed in grayout in the computer Input.

Page 70

Appendix

Computer Input

System

✽ System displayed in the System Menu varies depending on the input signal.

PC Adjust

(1)

Auto PC adj.

Fine sync.

Total dots

Position H

Position V

Current mode

Clamp

Display area - H

Display area - V

Reset

Mode free

Store

Mode 1

Mode 2

SVGA 1

SVGA 2

SVGA 3

0–31

H-sync freq.

V-sync freq.

Quit

Yes/No

Mode 1

Mode 10

Quit

Image Select

Screen

Standard

Real

Image 1

Image 10

Normal

True

Wide

Full screen

Custom

Digital zoom +

Digital zoom -

Keystone

Ceiling Rear

Reset

Quit

Scale H & V Position

Common Reset

Quit

Store Reset On/Off On/Off

Yes/No

H / V On/Off H / V

Quit

Video Input

Image Select

System

(2)

Standard

Cinema

Image 1

Image 10

Auto

PAL

SECAM

NTSC

NTSC 4.43

PAL-M

PAL-N

✔Note:

•The Menu display varies depending on the input signal.

Screen

System

(3)

Normal

Wide

Custom

Keystone

Ceiling Rear

Reset

Quit

Auto

1080i

1035i

720p

575p

480p

575i

480i

Scale H & V Position

Common Reset

Quit

Store Reset On/Off On/Off Yes/No

H / V On/Off H / V

Page 71

Computer Input/Video Input

Appendix

Setting

Language

Background

Logo

Lamp mode

Lamp control

Filter control

Fan control

RC sensor

Power management

On start

Projector ID

Shutter

Lamp counter

12 languages provided.

Quit

Position/Simple Menu/Quit

Off/Countdown Off/OnDisplay

Blue/User/Black

Logo select

Capture

Logo PIN code lock

Quit

2-Lamp mode/ 1-Lamp mode

Auto/Normal/Eco

Yes/No

Normal/Max

Code 1Remote Control

Code 8

Quit Both/Front/Back

Off/Ready/Shut down

1–30 Min.

Quit

On/Off

Key lockSecurity

PIN code lock Off/On1/On2

Quit

1–999

Protection

Management

Quit

Lamp 1/2 [ ] Hour(s)

Quit

Remote control

Projector

5 - 180 Min.

Off/Default/User

Yes/No

On/Off

Logo PIN code change

Quit

Off

Projector

Remote Control

PIN code change

Quit

Reset

On / Off

Yes/No

Test pattern

Factory default

Quit

Used timeFilter counter

Scrolls remaining Scroll(s)

Quit

[ ] Hour(s)

Off/400H/700H/1000H

Reset

Quit

Reset

Quit

8 test patterns provided

Quit

Yes/No

Page 72

Appendix

Indicators and Projector Condition

Check the indicators for the projector condition.

The projector is operating normally.

LAMP

red

READY

green

Indicators

WARNING

TEMP.

red

WARNING

FILTER

orange

SHUTTER

blue

LAMP 1/2

REP.

orange

Projector Condition

The projector is off. (The main On/Off switch is OFF position or the AC power cord is unplugged.)

✽

✽ ✽

✽

The projector is in stand-by mode. Press the ON/ STAND-BY button to turn on the projector.

The projector is operating normally. (The Shutter is open)

The projector is operating normally. (The Shutter is closed)

The projector is preparing for stand-by or the projection lamp is being cooled down. The projector cannot be turned on until cooling is completed and the READY indicator lights green.

The projection lamp is being cooled down in the Power management mode.

The projector is in the Power management mode.

The projection lamp is being cooled down in the Shutter management mode.

The projector is in the Shutter management mode. Press the ON/STAND-BY button to turn on the projector.

✽

Fig.1 Filter replacement icon and “Please wait...”

• • • on

• • • dim

• • • off

• • • blinking at the normal rate

• • • blinking fast

✽

(approx. 1 second ON, 1 second OFF)

(approx. 0.5 seconds ON,

0.5 seconds OFF)

The filter is scrolled using the FILTER button on the remote control or the Filter control function in the setting menu. When the filter is being scrolled, the Filter replacement icon and “Please wait...” message (Fig. 1) appear on the screen.

• • • blinking slow

(approx. 2 seconds ON, 2 seconds OFF)

• • • Differs according to conditions.

✽

Page 73

The projector is detecting abnormal condition.

Indicators

✽

LAMP 1/2

REP.

orange

✽

LAMP

red

READY

green

WARNING

TEMP.

red

WARNING

FILTER

orange

✽

SHUTTER

blue

Appendix

Projector Condition

The temperature inside the projector is elevated close to the abnormally high level.

The temperature inside the projector is abnormally high. The projector cannot be turned on. When the projector is cooled down enough and the temperature returns to normal, the READY indicator lights green and the projector can be turned on. (The WARNING TEMP. indicator keeps blinking.)

The projector has been cooled down enough and the temperature returns to normal. When turning on the projector, the WARNING TEMP. indicator stops blinking. Check and replace the filter.

The lamp cannot light up. (The projector is preparing

✽

✽ ✽

WARNING FILTER

When the filter detects clogging, reaches a time set in the timer setting or runs out of the filter scroll, the WARNING

FILTER indicator lights orange. When this indicator lights orange, replace the filter or the filter cartridge with a new one promptly. Reset the Filter counter and Scroll counter after replacing the filter cartridge (p.59).

✽

✽✽

for stand-by or the projection lamp is being cooled down. The projector cannot be turned on until cooling is completed.)

The lamp cannot light up. (The lamp has been cooled down enough and the projector is in standby mode and ready to be turned on with the ON/ STAND-BY button.)

When either of the 2 lamps is out, the projector operates with 1 lamp.

The lamp has been used overtime. Replace the lamp immediately and then reset the lamp counter. The indicator will be turned off after resetting the counter.

LAMP REPLACE 1 and 2

When the LAMP 1 REPLACE indicator and the LAMP 2 REPLACE indicator light orange, replace the projection lamps

with new ones promptly. And then reset the Lamp time after replacement of the lamps. See pages 55, 61, and 62.

Page 74

Appendix

The projector is detecting abnormal condition.

Indicators

LAMP

red

Fig.2 Filter replacement icon

Fig.3

READY

green

WARNING

TEMP.

red

WARNING

FILTER

orange

SHUTTER

blue

✽

LAMP 1/2

REP.

orange

✽

Projector Condition

If the Filter counter reached a time set in the timer setting, a Filter replacement icon (Fig.2) appears on the screen and the WARNING FILTER indicator on the top panel lights up. Replace the filter as soon as possible. If the filter is out of scroll and the projector reaches a time set in the timer setting, Fig. 3 appears on the screen and the WARNING FILTER indicator lights up. Replace the filter cartridge as soon as possible.

If the filter is clogged and no scroll is left in the filter cartridge, a Filter cartridge replacement icon (Fig.4) appears on the screen and the WARNING FILTER indicator lights up. Replace the filter cartridge as soon as possible.

Fig.4 Filter cartridge replacement icon

✽

✽✽

✽

✔Note:

• Fig.2, Fig.3 and Fig.4 icon will not appear when the Display function is set to “Off” (p.48), or during “Freeze” (p.29).

The projector detects an abnormal condition during filter scroll.

The projector is being cooled down after detecting an abnormal condition during filter scroll.

The projector has been cooled down enough and is in the stand-by mode condition during filter scroll.

The filter cartridge is not installed in the projector. Check the filter compartment to see if the filter cartridge is installed in the projector. When the filter cartridge is installed and the indicators continue to light and blink, read the column below.

The projector detects an abnormal condition and cannot be turned on. Unplug the AC power cord and plug it again to turn on the projector. If the projector is turned off again, unplug the AC power cord and contact the dealer or the service center. Do not leave the projector on. It may cause an electric shock or a fire hazard.

after detecting an abnormal

✽✽

✽

The shutter is out of control.

✽✽✽

The shutter is out of control. (The projector is in the cooling mode.)

The shutter is out of control. (The projector is in the stand-by mode.) In that case, contact the service station immediately.

Page 75

Appendix

Compatible Computer Specifications

Basically this projector can accept the signal from all computers with the V- and H-Frequency mentioned below and less than 230 MHz of Dot Clock.

PC Adjustment can be limited when these modes are selected.

ON-SCREEN

DISPLAY

VGA 1 640x480 31.470 59.880 VGA 2 720x400 31.470 70.090 VGA 3 640x400 31.470 70.090 VGA 4 640x480 37.860 74.380 VGA 5 640x480 37.860 72.810 VGA 6 640x480 37.500 75.000 VGA 7 640x480 43.269 85.000

MAC LC13 640x480 34.970 66.600

MAC 13 640x480 35.000 66.670

480p 640x480 31.470 59.880 575p 768x575 31.250 50.000

575i

480i

SVGA 1 800x600 35.156 56.250 SVGA 2 800x600 37.880 60.320 SVGA 3 800x600 46.875 75.000 SVGA 4 800x600 53.674 85.060 SVGA 5 800x600 48.080 72.190 SVGA 6 800x600 37.900 61.030 SVGA 7 800x600 34.500 55.380 SVGA 8 800x600 38.000 60.510

SVGA 9 800x600 38.600 60.310 SVGA 10 800x600 32.700 51.090 SVGA 11 800x600 38.000 60.510

MAC 16 832x624 49.720 74.550

XGA 1 1024x768 48.360 60.000 XGA 2 1024x768 68.677 84.997 XGA 3 1024x768 60.023 75.030 XGA 4 1024x768 56.476 70.070 XGA 5 1024x768 60.310 74.920 XGA 6 1024x768 48.500 60.020 XGA 7 1024x768 44.000 54.580 XGA 8 1024x768 63.480 79.350

XGA 9

XGA 10 1024x768 62.040 77.070

XGA 11 1024x768 61.000 75.700

XGA 12

XGA 13 1024x768 46.900 58.200

XGA 14 1024x768 47.000 58.300

XGA 15 1024x768 58.030 72.000

MAC 19 1024x768 60.240 75.080

SXGA 1 1152x864 64.200 70.400

SXGA 2 1280x1024 62.500 58.600

SXGA 3 1280x1024 63.900 60.000

SXGA 4 1280x1024 63.340 59.980

SXGA 5 1280x1024 63.740 60.010

RESOLUTION H-Freq.(kHz) V-Freq.(Hz)

768x576

(Interlace)

640x480

(Interlace)

1024x768

(Interlace)

1024x768

(Interlace)

15.625 50.000

15.734 60.000

36.000 87.170

35.522 86.960

ON-SCREEN

DISPLAY

SXGA 6 1280x1024 71.690 67.190 SXGA 7 1280x1024 81.130 76.107 SXGA 8 1280x1024 63.980 60.020

SXGA 9 1280x1024 79.976 75.025 SXGA 10 1280x960 60.000 60.000 SXGA 11 1152x900 61.200 65.200 SXGA 12 1152x900 71.400 75.600

SXGA 13

SXGA 14

SXGA 15 1280x1024 63.370 60.010 SXGA 16 1280x1024 76.970 72.000 SXGA 17 1152x900 61.850 66.000

SXGA 18

SXGA 19 1280x1024 63.790 60.180 SXGA 20 1280x1024 91.146 85.024 SXGA+ 1 1400x1050 63.970 60.190 SXGA+ 2 1400x1050 65.350 60.120 SXGA+ 3 1400x1050 65.120 59.900 SXGA+ 4 1400x1050 64.030 60.010 SXGA+ 5 1400x1050 62.500 58.600

MAC 21 1152x870 68.680 75.060

MAC 1280x960 75.000 75.080

MAC 1280x1024 80.000 75.080 WXGA 1 1366x768 48.360 60.000 WXGA 2 1360x768 47.700 60.000 WXGA 3 1376x768 48.360 60.000 WXGA 4 1360x768 56.160 72.000 WXGA 6 1280x768 47.776 59.870 WXGA 7 1280x768 60.289 74.893 WXGA 8 1280x768 68.633 84.837 WXGA 9 1280x800 49.600 60.050

WXGA 10 1280x800 41.200 50.000 WXGA 11 1280x800 49.702 59.810

WUXGA 1 1920x1200 74.556 59.885

WSXGA+ 1 1680x1050 65.290 59.954

WXGA+ 1 1440x900 55.935 59.887

UXGA 1 1600x1200 75.000 60.000 UXGA 2 1600x1200 81.250 65.000 UXGA 3 1600x1200 87.500 70.000 UXGA 4 1600x1200 93.750 75.000 UXGA 5 1600x1200 106.250 85.000

720p 1280x720 45.000 60.000

720p 1280x720 37.500 50.000

1035i

1080i

RESOLUTION H-Freq.(kHz) V-Freq.(Hz)

1280x1024

(Interlace)

1280x1024

(Interlace)

1280x1024

(Interlace)

1920x1035

(Interlace)

1920x1080

(Interlace)

1920x1080

(Interlace)

50.000 86.000

50.000 94.000

46.430 86.700

33.750 60.000

28.125 50.000

✽

✽ ✽ ✽ ✽

✽

“True” cannot be selected when WUXGA1, UXGA2, UXGA3, UXGA4 and UXGA5 are selected (p.39)

Page 76

Appendix

When an input signal is digital from the DVI terminal, refer to the chart below.

ON-SCREEN

DISPLAY

D-VGA 640x480 31.470 59.940 D-480p 720x480 31.470 59.880 D-575p 720x575 31.250 50.000

D-SVGA 800x600 37.879 60.320

D-XGA 1024x768 43.363 60.000

D-WXGA 1 1366x768 48.360 60.000 D-WXGA 2 1360x768 47.700 60.000 D-WXGA 3 1376x768 48.360 60.000 D-WXGA 4 1360x768 56.160 72.000 D-WXGA 5 1366x768 46.500 50.000 D-WXGA 6 1280x768 47.776 59.870 D-WXGA 7 1280x768 60.289 74.893 D-WXGA 8 1280x768 68.633 84.837 D-WXGA 9 1280x800 49.600 60.050

D-WXGA 10 1280x800 41.200 50.000

D-WXGA 11 1280x800 49.702 59.810

D-SXGA 1 1280x1024 63.980 60.020 D-SXGA 2 1280x1024 60.276 58.069

RESOLUTION H-Freq.(kHz) V-Freq.(Hz)

ON-SCREEN

DISPLAY

D-SXGA+ 1 1400x1050 63.970 60.190 D-SXGA+ 2 1400x1050 65.350 60.120 D-SXGA+ 3 1400x1050 65.120 59.900

D-WSXGA+ 1 1680x1050 65.290 59.954

D-WXGA+ 1 1440x900 55.935 59.887

D-720p 1280x720 45.000 60.000 D-720p 1280x720 37.500 50.000

D-1035i

D-1080i

D-1080psf/30 1920x1080 33.750 60.000 D-1080psf/25 1920x1080 28.125 50.000 D-1080psf/24 1920x1080 27.000 48.000

RESOLUTION H-Freq.(kHz) V-Freq.(Hz)

1920x1035

(Interlace)

1920x1080

(Interlace)

1920x1080

(Interlace)

33.750 60.000

28.125 50.000

✔Note:

•Depending on the condition of signals and the type and length of cables, these signals may not be properly viewed.

•Specifications are subject to change without notice.

Page 77

Appendix

Technical Specifications

Mechanical Information

Projector Type Multi-media Projector

Dimensions (W x H x D) 20.87” x 10.53” x 29.8” (530 mm x 267.5 mm x 757 mm) (Not including projections)

Net Weight 60.85lbs (27.6 kg)

Feet Adjustment 0˚ to 2.8˚

Panel Resolution

LCD Panel System 1.8” TFT Active Matrix type, 3 panels

Panel Resolution 1,024 x 768 dots

Number of Pixels 2,359,296 (1,024 x 768 x 3 panels)

Signal Compatibility

Color System

High Definition TV Signal 480i, 480p, 575i, 575p, 720p, 1035i, and 1080i

Scanning Frequency H-sync. 15 kHz–120 kHz, V-sync. 48 Hz–120 Hz

Optical Information

Projection Lamp 330 W NSHA lamp x 2

Interface

Input 1 DVI-D Terminal (Digital), Mini D-Sub 15-pin Terminal (Analog)

Input 2 BNC Type x 5 (VIDEO/Y/G, B/Pb/Cb, R/Pr/Cr, H/HV and V), S-Video

Other Jacks Serial port in (D-sub 9), Serial port out (D-sub 9), USB port, and Wired Remote Jack

Power

Voltage and Power Consumption AC 100–120 V (11.2A Max. Ampere), 50/60 Hz (The U.S.A and Canada)

AC 200-240 V (5.1A Max. Ampere), 50/60 Hz (Continental Europe and The U.K.)

Operating Environment

Operating Temperature 41˚F–104˚F (5˚C–40˚C)

Storage Temperature 14˚F–140˚F (-10˚C–60˚C)

Remote Control

Battery AA or LR6 Type x 2

Operating Range 16.4’ (5 m/±30˚)

Dimensions 1.79” (W) x 1.03” (H) x 6.24” (D) (45.5 mm x 26.2 mm x 158.5 mm)

Net Weight 4.1 oz (117 g) (including batteries)

Accessories

Owner’s Manual (CD-ROM)

Quick Reference Guide

AC Power Cord

Remote Control and Batteries

VGA Cable

PIN Code Label

Lens Attachments (2 types) (For option lens)

Light Block Plates (3 types) (For option lens)

Spacer (For option lens)

Real Color Manager Pro (CD-ROM)

Mounting Clamp

PAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N

Page 78

Appendix

l The specifications are subject to change without notice. l LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are effective, a tiny

fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD panels. l Each projector has its own characteristics. When projecting with several projectors on the same screen or side by side, you may recognize different white balance

and color uniformity on each projector.

Optional Parts

The parts listed below are optionally available. When ordering those parts, specify the item name and Model No. to the sales dealer.

Model No.

Wired Remote Cable(30m) : POA-CA-RC30

Optional Interface Board (DVI) : POA-MD18DVI

Optional Interface Board (5-BNC) : POA-MD16VD1

Optional Interface Board (D-sub 15) : POA-MD04VGA

Optional Interface Board (Dual-SDI) : POA-MD17SDID

Optional Interface Board (Network board) : POA-MD13NET2

Optional Interface Board (DVI / D-sub 15) : POA-MD23ADI

Optional Interface Board (5-BNC / VIDEO) : POA-MD25VD3

Page 79

Configurations of Terminals

9 678

1 9

2 10 18

3 11

4 12 20

5 13 21

6 14 22

7 15 23

8 16 24

ANALOG (Mini D-sub 15 pin)

Appendix

DIGITAL DVI-D (DVI 24 PIN)

Red Input

Green Input

Blue Input

3 4

No Connect Ground (Horiz.sync.)

Ground (Red)

Ground (Green)

Ground (Blue)

T.M.D.S. Data2–

T.M.D.S. Data2+

T.M.D.S. Data2 Shield

No Connect

DDC Clock

DDC Data

No Connect

+5V Power

Ground (Vert. sync.)

Ground

DDC Data

Horiz. sync.

Vert. sync.

DDC Clock

T.M.D.S. Data1–

T.M.D.S. Data1+

T.M.D.S. Data1 Shield

No Connect

+5V Power

Ground (for +5V)

Hot Plug Detect

T.M.D.S. Data0–

T.M.D.S. Data0+

T.M.D.S. Data0 Shield

No Connect

T.M.D.S. Clock Shield

T.M.D.S. Clock+

T.M.D.S. Clock–

USB CONNECTOR (Series B)

Vcc

- Data

+ Data

Ground

CONTROL PORT CONNECTOR (D-sub 9 pin)

Serial

-----

R X D

T X D

-----

RTS

CTS

-----

Page 80

Appendix

PIN Code Number Memo

Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station.

PIN Code Lock No.

Factory default set No: 1 2 3 4*

Logo PIN Code Lock No.

Factory default set No: 4 3 2 1*

* Shoul d t h e f our-d i g i t n u m ber b e

changed, the factory set number will be invalid.

While the projector is locked with the PIN code...

Put the label below (supplied) on in a prominent place of the projector’s body while it is locked with a PIN code.

Page 81

Dimensions

5.81(147.5)

20.87(530)

20.65(524.5)

108°

8.66(220)

8.46(215)

1.18(30)

7.28(185)

23.62(600)

200.0 234.0

26.77(680)

3.03(77)

9.25(235)9.25(235)

29.80(757.0)

5.00(127)

9.63(244.5)

10.53(267.5)

1.14(29)

9.82(249.5)

10.43(265)

10.89(276.5)

4.72(120)

8.27(210)

6.89(175)

Screw Holes for Ceiling Mount Screw: M8 Depth: 0.393 (10.0)

Unit: inch (mm)

Appendix

Page 82

Appendix

Serial Control Interface

This projector provides a function to control and monitor the projector's operations by using the RS-232C serial port.

Operation

Connect a RS-232C serial cross cable to SERIAL

PORT IN on the projector and serial port on the PC. (See p.11)

Launch a communication software provided with PC

and setup the communication condition as follows:

Type the command for controlling the projector and

then enter the "Enter" key.

Example

When you want to change the input to INPUT 2, Type 'C' '0' '6' 'Enter'.

Baud rate : 9600 / 19200 bps Parity check : none Stop bit : 1 Flow control : none Data bit : 8

✔Note:

• The default of the baud rate is set to 19200 bps. If an error occurs in the communication, change the serial port and the communication speed (baud rate).

•Enter with ASCII 64-byte capital characters and onebyte characters.

Functional Execution Command

Format

The command is sent from PC to the projector with the format below; 'C' [Command] 'CR' Command: two characters (refer to the

command table below.

-The projector decodes the command and returns the 'ACK' with the format below; 'ACK' 'CR'

-When the projector cannot decode the command, it returns with format below. ‘?’ ‘CR’

Command Function

C00 Turn the projector ON

C01

C05 Select Input 1 C06 Select Input 2 C07 Select Input 3 C08 Select Input 4

C0D Video mute ON

C0E Video mute OFF C0F Aspect 4:3 C10 Aspect 16:9 C1C Menu ON

C1D Menu OFF

C3A Pointer RIGHT

Turn the projector OFF (immediately OFF)

Command Function

C3B Pointer LEFT C3C Pointer UP C3D Pointer DOWN

C3F Enter C46 Zoom DOWN

C47 Zoom UP C4A Focus DOWN C4B Focus UP C5D Lens shift UP

C5E Lens shift DOWN

C5F Lens shift LEFT

C60 Lens shift RIGHT

C89 Auto PC Adj.

C8E Keystone UP

C8F Keystone DOWN

C90 Keystone RIGHT

C91 Keystone LEFT

Page 83

Status Read Command

Format

The command is sent from PC to the projector with the format below; 'CR' [Command] 'CR' Command: one character (refer to the command

table below. The projector decodes the command and returns the 'Character string' with the format below;

Appendix

Command Function

CR0 Status Read

CR6 Temperature Read S1 S2 S3

Projector

Return

Projector status

Power On

Stand-by mode

Countdown

Cooling down

Power Malfunction

Cooling down at the temperature anomaly

Unable to receive the RC232C command.

Cooling down at Power Management mode

Power Management mode after Cooling down

Cooling down after the projector is turned off when the lamps are out. Stand-by mode after Cooling down when the lamps are out.

Stand-by mode after Cooling down at the temperature anomaly.

Cooling down when the projector is turned off by the shutter management function.

Stand-by mode after Cooling down by the shutter management function.

S1 = Temperature at Sensor 1 (˚C)

S2 = Temperature at Sensor 2 (˚C)

S3 = Temperature at Sensor 3 (˚C)

(ex.) S1 = 12.3˚C, S2 = 23.4˚C, S3 = 34.5˚C

--> The projector displays “12.3 23.4 34.5”

( For each sensor, two digit and the tenth place numbers are

displayed with a space between each temperature.)

Communication failure

The tables on page 82 and 83 show the typical command lists for controlling the projector. Please consult your local dealer for further information of other commands.

Page 84

KW7A

SANYO Electric Co., Ltd.

Sanyo PLC-XF71 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Features and Design

Table of Contents

To The Owner

Safety Instructions

Air Circulation

Installing the Projector in Proper Directions

Moving the Projector

Compliance

Part Names and Functions

Front

Back

Terminals and Connectors

Side Control and Indicators

Side Control

Indicators

Remote Control

Remote Control Battery Installation

Remote Control Receivers and Operating Range

Wired Remote Control

Remote Control Code

Installation

Lens Installation

Positioning Projector

Lens Shift Adjustment

Picture Level and Pitch Adjustment

Terminals of Projector

Connecting to Computer

Connecting to Video Equipment

Connecting the AC Power Cord

Turning On the Projector

Basic Operation

Turning Off the Projector

How to Operate the On-Screen Menu

Menu Bar

Operating with Projector Control

Operating with Remote Control

Input

Input Selection

Computer Input Source Selection

Video Input Source Selection

Computer Input

Computer System Selection

Auto PC Adjustment

Manual PC Adjustment

Image Level Selection

Screen Size Adjustment

Video Input

Video System Selection

Image Level Selection

Screen Size Adjustment

Image Adjustment

Picture Image

Setting

Setting

Maintenance and Care

Filter Instructions

Replacing the Filter Cartridge

Resetting the Filter Counter

Resetting the Scroll Counter

Lamp Management

Lamp Replacement

Resetting the Lamp Counter

Cleaning the Projection Lens

Cleaning the Projector Cabinet

Warning Indicators

Appendix

Troubleshooting

Menu Tree

Indicators and Projector Condition

Compatible Computer Specifications

Technical Specifications

Optional Parts

Configurations of Terminals

PIN Code Number Memo

Dimensions

Serial Control Interface