Sanyo PLC-XF35, PLC-XF35N User Manual

Owner’s Manual

PLC-XF35/XF35NL

Multimedia Projector

MODEL

PLC-XF35N

2

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-

SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.

THIS SYMBOL INDICATES THAT DANGEROUS
VOLTAGE CONSTITUTING A RISK OF ELECTRIC
SHOCK IS PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT
OPERATING AND MAINTENANCE INSTRUCTIONS IN THE
OWNER'S MANUAL WITH THIS UNIT.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Before operating this projector, read this manual thoroughly and operate the projector properly.
This projector provides many convenient features and functions. Operating the projector properly enables you to
manage those features and maintains it in better condition for a considerable time.
Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other
accidents.
If your projector seems to operate improperly, read this manual again, check operations and cable connections and try
the solutions in the “Trouble-shooting” section of the end of this booklet. If the problem still persists, contact the sales
dealer where you purchased the projector or the service center.

TO THE OWNER

SAFETY PRECAUTIONS

WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO

RAIN OR MOISTURE.

● This projector produces intense light from the projection lens. Do not stare directly into the lens as possible.
Eye damage could result. Be especially careful that children do not stare directly into the beam.

● This projector should be set in the way indicated. If not, it may result in a fire hazard.

● Take appropriate space on the top, sides and rear of the projector

cabinet for allowing air circulation and cooling the projector.
Minimum distance should be taken. If the projector is to be built
into a compartment or similarly enclosed, the minimum distances
must be maintained. Do not cover the ventilation slot on the
projector. Heat build-up can reduce the service life of your
projector, and can also be dangerous.

● Do not put any flammable object or spray can near the projector, hot air is exhausted from the ventilation
holes.

● Remote Control Unit, supplied to this projector, emits the laser beam as the laser pointer function from Laser
Light Window while pressing LASER button (for 1 minute / LASER POINTER INDICATOR lights red to indicate
laser emission). Do not look into Laser Light Window or shine the laser beam on yourself or other people. Eye
damage may result.

● If the projector is not to be used for an extended time, unplug the projector from the power outlet.

READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE.

SIDE and TOP

REAR

20cm

50cm 50cm

1m

3

SAFETY INSTRUCTIONS

All the safety and operating instructions should be read before
the product is operated.

Read all of the instructions given here and retain them for later
use. Unplug this projector from AC power supply before
cleaning. Do not use liquid or aerosol cleaners. Use a damp
cloth for cleaning.

Follow all warnings and instructions marked on the projector.
For added protection to the projector during a lightning storm,

or when it is left unattended and unused for long periods of
time, unplug it from the wall outlet. This will prevent damage
due to lightning and power line surges.

Do not expose this unit to rain or use near water... for
example, in a wet basement, near a swimming pool, etc...

Do not use attachments not recommended by the
manufacturer as they may cause hazards.

Do not place this projector on an unstable cart, stand, or table.
The projector may fall, causing serious injury to a child or
adult, and serious damage to the projector. Use only with a
cart or stand recommended by the manufacturer, or sold with
the projector. Wall or shelf mounting should follow the
manufacturer's instructions, and should use a mounting kit
approved by the manufacturers.

An appliance and cart combination should
be moved with care. Quick stops,
excessive force, and uneven surfaces
may cause the appliance and cart
combination to overturn.

Slots and openings in the back and bottom of the cabinet are
provided for ventilation, to insure reliable operation of the
equipment and to protect it from overheating.

The openings should never be covered with cloth or other
materials, and the bottom opening should not be blocked by
placing the projector on a bed, sofa, rug, or other similar
surface. This projector should never be placed near or over a
radiator or heat register.

This projector should not be placed in a built-in installation
such as a book case unless proper ventilation is provided.

Never push objects of any kind into this projector through
cabinet slots as they may touch dangerous voltage points or
short out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the projector.

This projector should be operated only from the type of power
source indicated on the marking label. If you are not sure of
the type of power supplied, consult your authorized dealer or
local power company.

Do not overload wall outlets and extension cords as this can
result in fire or electric shock. Do not allow anything to rest on
the power cord. Do not locate this projector where the cord
may be damaged by persons walking on it.

Do not attempt to service this projector yourself as opening or
removing covers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified service
personnel.

Unplug this projector from wall outlet and refer servicing to
qualified service personnel under the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the projector.
c. If the projector has been exposed to rain or water.
d. If the projector does not operate normally by following the

operating instructions. Adjust only those controls that are
covered by the operating instructions as improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to
restore the projector to normal operation.

e. If the projector has been dropped or the cabinet has been

damaged.

f. When the projector exhibits a distinct change in

performance-this indicates a need for service.

When replacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer that have the same characteristics as the
original part. Unauthorized substitutions may result in fire,
electric shock, or injury to persons.

Upon completion of any service or repairs to this projector, ask
the service technician to perform routine safety checks to
determine that the projector is in safe operating condition.

Voor de klanten in Nederland

Bij dit product zijn batterijen
geleverd.
Wanneer deze leeg zijn,
moet u ze niet weggooien
maar inleveren als KCA.

4

COMPLIANCES

AC Power Cord for the United Kingdom :

This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin
face of the plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the
same rating, marked thus . If the fuse cover is detachable, never use the plug with the cover omitted. If a
replacement fuse cover is required, ensure it is of the same colour as that visible on the pin face of the plug
(i.e. red or orange). Fuse covers are available from the Parts Department indicated in your User Instructions.
If the plug supplied is not suitable for your socket outlet, it should be cut off and destroyed.
The end of the flexible cord should be suitably prepared and the correct plug fitted. (See Over)

WARNING : A PLUG WITH BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED IN A LIVE SOCKET
OUTLET.

The Wires in this mains lead are coloured in accordance with the following code:

Green-and-yellow ············ Earth
Blue ································· Neutral

Brown ······························ Live
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings
identifying the terminals in your plug proceed as follows:
The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked
by the letter E or by the safety earth symbol or coloured green or green-and-yellow.
The wire which is coloured blue must be connected to the terminal which is marked with the letter N or
coloured black.
The wire which is coloured brown must be connected to the terminal which is marked with the letter L or
coloured red.

WARNING : THIS APPARATUS MUST BE EARTHED.

The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.

AC Power Cord for the United States and Canada :

AC Power Cord used in the United States and Canada is listed by the Underwriters
Laboratories (UL) and certified by the Canadian Standard Association (CSA).
AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure
that the plug will fit into the power outlet. Do not try to defeat this safety feature.
Should you be unable to insert the plug into the outlet, contact your electrician.

THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE.

AC POWER CORD REQUIREMENT

Federal Communication Commission Notice

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.

Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such
changes or modifications should be made, you could be required to stop operation of the equipment.

CAUTION!

This is a Class A equipment. This equipment can cause interference in residential areas; in this case, the operator
can be asked to take adequate countermeasures.

GROUND

ASA

5

TABLE OF CONTENTS

FEATURES AND DESIGN 6

BEFORE OPERATION 16

COMPUTER MODE 25

VIDEO MODE 34

SETTING 39

APPENDIX 42

PREPARATION 7

NAME OF EACH PART OF PROJECTOR 7
SETTING-UP PROJECTOR 8

CONNECTING AC POWER CORD 8
LENS INSTALLATION 9
POSITIONING PROJECTOR 9
LENS SHIFT ADJUSTMENT 9
PICTURE LEVEL AND TILT ADJUSTMENT 10
MOVING PROJECTOR 10

CONNECTING PROJECTOR 11

TERMINALS OF PROJECTOR 11
CONNECTING TO COMPUTER 14
CONNECTING TO VIDEO EQUIPMENT 15

TOP CONTROLS AND INDICATORS 16
OPERATION OF REMOTE CONTROL 17

LASER POINTER FUNCTION 17
REMOTE CONTROL BATTERIES INSTALLATION 18

OPERATING ON-SCREEN MENU 19

HOW TO OPERATE ON-SCREEN MENU 19
FLOW OF ON-SCREEN MENU OPERATION 19
MENU BAR 20

SELECTING INPUT SOURCE 25
SELECTING COMPUTER SYSTEM 25

COMPATIBLE COMPUTER SPECIFICATIONS 27

PC ADJUSTMENT 28

AUTO PC ADJUSTMENT 28
MANUAL PC ADJUSTMENT 29

PICTURE IMAGE ADJUSTMENT 31

IMAGE LEVEL SELECT 31
IMAGE LEVEL ADJUSTMENT 32

PICTURE SCREEN ADJUSTMENT 33

SELECTING INPUT SOURCE 34
SELECTING VIDEO SYSTEM 35
PICTURE IMAGE ADJUSTMENT 36

IMAGE LEVEL SELECT 36
IMAGE LEVEL ADJUSTMENT 37

PICTURE SCREEN ADJUSTMENT 38

SETTING MENU 39

OPERATING WIRELESS MOUSE 42
MAINTENANCE 42

WARNING TEMP. INDICATOR 42
AIR FILTER CARE AND CLEANING 43
CLEANING PROJECTION LENS 43
LAMP MANAGEMENT 44
LAMP REPLACEMENT 45

TROUBLESHOOTING 47
TECHNICAL SPECIFICATIONS 49

BASIC OPERATION 21

TURNING ON / OFF PROJECTOR 21
ADJUSTING SCREEN 22

ZOOM ADJUSTMENT 22
FOCUS ADJUSTMENT 22
LENS SHIFT ADJUSTMENT 22
KEYSTONE ADJUSTMENT 22
PICTURE FREEZE FUNCTION 23
NO SHOW FUNCTION 23
P-TIMER FUNCTION 23

SOUND ADJUSTMENT 24

TRADEMARKS

● Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple Computer,Inc.

● IBM and PS/2 are trademarks or registered trademarks of International Business Machines, Inc.

● Windows and PowerPoint are registered trademarks of Microsoft Corporation.

● Each name of corporations or products in the owner's manual is a trademark or a registered trademark of its

respective corporation.

6

FEATURES AND DESIGN

This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This
projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD)
technology.

◆ Compatibility

This projector widely accepts various video and
computer input signals including;

● Computers

IBM-compatible or Macintosh computer up to 1600
x 1200 resolution.

● 6 Color Systems

NTSC, PAL, SECAM, NTSC 4.43, PAL-M or PAL­N color system can be connected.

● Component Video

Component video signal, such as a DVD player
output high definition TV signals including 480i,
480p, 575i, 575p, 720p, 1035i, 1080i-50 or 1080i­60, can be connected.

● S-Video

S-Video signal, such as a S-VHS VCR output
signal, can be connected.

◆ High Resolution Image

This projector provides 1024 x 768 dots resolution for
computer input and 800 horizontal TV lines. Resolution
from a computer between XGA (1024 x 768) and UXGA
(1600 x 1200) is compressed into 1024 x 768 dots. This
projector cannot display image of over 1600 x 1200 dots.
When resolution of your computer is over than 1600 x
1200, reset a computer output for lower resolution.

◆ Multi-Scan System

This projector has Multi-Scan System to conform to
almost all computer output signals quickly. There is no
need for troublesome manual adjustment of frequency
and other settings.

◆ Keystone Correction

Positioning height of a projector may result in distorted
image being displayed in a trapezoid shape. Keystone
Correction solves this problem by digitally altering
projection to produce undistorted images.

◆ Multilanguage Menu Display

Operation menu is displayed in; English, German,
French, Italian, Spanish, Portuguese, Dutch, Swedish,
Chinese, Korean or Japanese.

◆ One-Touch Auto PC Adjustment

Incoming computer video signals are recognized and
best adjustment is automatically set by Auto PC
Adjustment. No complicated setup is necessary and
projection is always precise.

◆ Digital Zoom (for Computer)

Digital Zoom function adjusts image size to approx. 1/4 ~
49 times of original image size, allowing you to focus on
crucial information at a presentation.

◆ Power Management

Power Management function is provided to reduce power
consumption while a projector is not in use.
This Power Management function operates to turn
Projection Lamp off when a projector detects signal
interruption and any button is not pressed over 5
minutes. Projection Lamp is automatically turned on
again when a projector detects signal or any operation
button is pressed.
This projector is shipped with this function ON.

◆ Wireless Mouse

Remote Control Unit supplied with this projector has
Wireless Mouse function for a connected computer. This
function enables you to operate both projector and
computer with Remote Control Unit only.

◆ Digital Visual Interface

This projector is equipped with DVI 29-pin terminal for
connecting DVI output from a computer.

◆ Laser Pointer Function

Remote Control Unit supplied with this projector includes
Laser Pointer function. This function helps you to make
a smart presentation on a projected screen.

◆ Progressive Scan Function

This function converts interlace video signals into
progressive scan signals and provide fine picture quality.

◆ Motor-driven Lens Shift

Projection lens can be moved up and down with motor­driven lens shift function. This function makes it easy to
provide projected image where you want.
Zoom and focus can be also adjusted with motor-driven
operation.

◆ Multi Versatile Platform

This projector applies various input/output terminals and
3 terminal slots for expansion to tune to diversity of
signals from computers and video equipment.

3-built-in Terminal Slots enable you to arrange any
combinations of input sources just by changing Terminal
Boards. For Terminal Boards, contact sales dealer
where you purchased a projector.

◆ Selectable Terminal Slots

◆ Network board (Optional)

Network board is an optional product to control and set
up a projector via the network cable. By accessing to the
connected projector using the web browser on your
computer. It can be controlled and set up the projector
remotely. Contact the sales dealer where you purchased
this projector for optional parts.

7

PREPARATION

NAME OF EACH PART OF PROJECTOR

BOTTOM

BACK

HOT AIR EXHAUSTED !

Air blown from exhaust vent is hot. When
using or installing a projector, following
precautions should be taken.

● Do not put a flammable object near this vent.

● Keep rear grills at least 3’ (1m) away from

any object, especially heat-sensitive object.

● Do not touch this area, especially screws
and metallic parts. This area will become
hot while a projector is used.

This projector detects internal temperature
and automatically controls operating power
of Cooling Fans.

FRONT

LAMP

COVER

This projector is equipped with cooling
fans for protection from overheating.
Pay attention to following to ensure
proper ventilation and avoid a possible
risk of fire and malfunction.

● Do not cover vent slots.

● Keep bottom clear of any objects.

Obstructions may block cooling air.

AIR INTAKE VENTS

PROJECTION LENS

SPEAKERS

INFRARED

REMOTE RECEIVER

LENS COVER

POWER CORD

CONNECTOR

EXHAUST VENT

MAIN ON / OFF

SWITCH

INFRARED

REMOTE RECEIVER

CARRYING HANDLE

ADJUSTABLE FEET

AIR INTAKE VENT

Do not turn on a projector with lens cover
attached. High temperature from light beam may
damage lens cover and result in fire hazard.

CAUTION

AIR INTAKE

VENT

EXHAUST VENT

EXHAUST VENT

8

PREPARATION

SETTING-UP PROJECTOR

This projector uses nominal input voltages of 100-120 V
or 200-240 V AC. This projector automatically selects
correct input voltage. It is designed to work with single­phase power systems having a grounded neutral
conductor. To reduce risk of electrical shock, do not plug
into any other type of power system.
Consult your authorized dealer or service station if you
are not sure of type of power supply being in use.
Connect a projector with a peripheral equipment before
turning a projector on. (Refer to pages 12 ~ 15 for
connection.)

CONNECTING AC POWER CORD

Connect AC Power Cord (supplied) to
a projector.
AC outlet must be near this equipment
and must be easily accessible.

To POWER CORD
CONNECTOR on your
projector.

Projector side AC Outlet side

Ground

NOTE ON POWER CORD

AC Power Cord must meet requirement of country where you use a projector.
Confirm an AC plug type with chart below and proper AC power cord must be used.
If supplied AC Power Cord does not match your AC outlet, contact your sales dealer.

To AC Outlet.

(120 V AC)

For Continental Europe

For the U.S.A. and Canada

For the U.K.

To AC Outlet.

(200 - 240 V AC)

To AC Outlet.

(200 - 240 V AC)

9

PREPARATION

POSITIONING PROJECTOR

Before setting up a projector, install Projection Lens on Projector.

1. Before installation, check where a projector is used and prepare suitable lens. For specifications of a
Projection Lens, refer to manual separately attached or contact sales dealer where you purchased a
projector.

2. For installation, refer to installation manual supplied to a Projector.

NOTE; PLC-XF35N is equipped with Model LNS-S02Z lens.

LENS INSTALLATION

When moving or setting up a projector, be sure to replace Lens Cover to protect surface. And be
careful not to hold or subject lens to strong forces. It may damage lens, cabinet, or mechanical parts.

Projection lens can be moved up and down with motor-driven lens shift function. This function makes it easy to
provide projected image where you want.

LENS SHIFT ADJUSTMENT

MOVED UP OR DOWN

Use LENS SHIFT button and
POINT UP/DOWN button to
move image up or down.
(Refer to page 22.)

This projector is designed to project on a flat projection
surface.

ROOM LIGHT

Brightness in a room has a great influence on picture
quality. It is recommended to limit ambient lighting in
order to provide best image.

This projector is equipped with cooling fan to protect it from
overheating. Pay attention to following to ensure proper venti­lation and avoid a possible risk of fire and malfunction.

● Do not cover vents with papers or other materials.

● Keep rear grill at least 3 feet (1 m) away from any

object.

● Make sure that there are no objects under a pro­jector. An object under a projector may prevent a
projector from taking cooling air through bottom
vent.

VENTILATION

AIR INTAKE VENT
(BOTTOM SIDE)

EXHAUST VENT
(FRONT AND REAR SIDE)

SCREEN

10

PREPARATION

CAUTION IN CARRYING OR TRANSPORTING A PROJECTOR

● Do not drop or bump a projector, otherwise damages or malfunctions may result.

● When carrying a projector, use a suitable carrying case.

● Do not transport a projector by using a courier or transport service in an unsuitable transport case. This

may cause damage to a projector. To transport a projector through a courier or transport service, consult
your dealer and best case should be applied.

Picture tilt and projection angle can be adjusted by rotating
ADJUSTABLE FEET. Projection angle can be adjusted up
to 6.9 degrees by rotating Adjustable Feet.

UP

UP

DOWN

DOWN

ADJUSTABLE FEET

PICTURE LEVEL AND TILT ADJUSTMENT

MOVING PROJECTOR

Use carry handle when moving a projector.
Replace lens cap and retract adjustable feet.

11

CONNECTING PROJECTOR

TERMINALS OF PROJECTOR

This projector applies various input/output terminals and 3 terminal slots for expansion to tune to diversity of signals from
computers and video equipment. 3-built-in Terminal Slots enable you to arrange desired combinations of input sources just
by changing Terminal Boards. For Terminal Boards, contact sales dealer where you purchased a projector.

R/Pr G/Y B/Pb H/HV V

CONTROL PORT

DVI

INPUT 1

R/C JACK

USB

RESET

(MONO)

(MONO)

(MONO)

(MONO)

AUDIO

CONTROL PORT

S-VIDEO

VIDEO/Y

C

INPUT 2INPUT 3

AUDIO

AUDIO

SERIAL PORT IN

SERIAL PORT OUT

AUDIO OUT

R

L

R

L

R

R

L

L

INPUT/OUTPUT
TERMINALS

Screws

Guide

Socket

Plug

Figure shows HDB 15-PIN terminal (Optional parts).

DVI Terminal

5 BNC Terminal

AV Terminal

3 TERMINAL SLOTS (Factory set)

Pull out terminal by holding handle.

Remove 2 Screws on terminal.

1
2

REPLACEMENT OF TERMINAL

Tighten screws to secure terminal.

Replace terminal. Insert terminal along Guide to fit Plug
into Socket.

3

4

NOTES ON ORDERING OR USING
OPTIONAL INTERFACE BOARD

When ordering or using Optional Interface Board
(Terminal Board), contact your sales dealer. When con­tacting the sales dealer, tell the Optional Control
Number (Op.cont.No.) in the menu that is located under
Language Select Menu. (See page 39.)

NOTE; When replacement of terminal board, MAIN

ON/OFF switch should be OFF position.

12

CONNECTING PROJECTOR

When controlling computer
with Remote Control of this
projector, connect mouse port
of your personal computer to
these connectors.
(Refer to P14.)

Connect S-VIDEO output from
video equipment to this jack.
(Refer to P15.)

Connect an audio output
from computer or video
equipment to these jacks.
(Refer to P14, 15.)

CONTROL PORT CONNECTORS

AUDIO INPUT JACKS

5 BNC INPUT JACKS

S-VIDEO INPUT JACK

Connect component video output (Cr, Y,
Cb or Pr, Y, Pb) from video equipment to
R/Pr, G/Y and B/Pb jacks or connect
computer output [5 BNC Type (Red,
Green, Blue, Horiz. Sync and Vert.
Sync.)] from computer to R/Pr, G/Y,
B/Pb, H/HV and V jacks. (Refer to P14,

15)

Connect computer output
(Digital/Analog DVI-I type) to
this terminal.
(Refer to P14.)

DVI INPUT TERMINAL

INPUT/OUTPUT TERMINALS AND JACKS

AV INPUT (VIDEO/Y, C) JACKS

Connect composite video output from
video equipment to VIDEO/Y jack or
connect Separate Y/C video outputs to
VIDEO/Y and C jacks. (Refer to P15.)

INPUT 2

INPUT 1 INPUT 1, 2, 3

INPUT 1, 2

INPUT 3

INPUT 3

DVI

R/Pr G/Y B/Pb H/HV V

VIDEO/Y

R/C JACK

C

SERIAL PORT IN

AUDIO

CONTROL PORT

L

R

(MONO)

AUDIO

S-VIDEO

SERIAL PORT OUT

R

R

AUDIO OUT

R

AUDIO

L

(MONO)

L

(MONO)

L

CONTROL PORT

USB

INPUT 1

INPUT 2INPUT 3

RESET

(MONO)

13

CONNECTING PROJECTOR

Connect an external audio
amplifier to these jacks.
(Refer to P14, 15.)

AUDIO OUTPUT JACKS

This projector uses a micro processor to control a
unit. Occasionally, this micro processor may
malfunction and need to be reset. This can be done
by pressing RESET button with a pen, which will
shut down and restart unit. Do not use RESET
function excessively.

RESET BUTTON

When using Wired / Wireless Remote
Control Unit as Wired Remote
Control, Connect Wired Remote
Control Unit to this jack with Remote
Control Cable (supplied). (Refer to
page 18.)

R/C JACK

USB PORT (Series B)

SERIAL PORT

OUT TERMINAL

SERIAL PORT

IN TERMINAL

This port is used to control a projector
with computer. It is also used to
control computer with Remote Control
of this projector.
(Refer to P40-42.)
Connect USB port of computer to this
port.

If you control a projector by computer,
you must connect a cable (not provided)
from your computer to this terminal.

This terminal outputs signal from
SERIAL PORT IN. More than two
projectors can be controlled with one
computer by connecting SERIAL PORT
IN. of another projector to this terminal.

DVI

R/Pr G/Y B/Pb H/HV V

S-VIDEO

SERIAL PORT OUT

RESET

R/C JACK

VIDEO/Y

SERIAL PORT IN

C

AUDIO

CONTROL PORT

L

R

(MONO)

AUDIO

R

(MONO)

AUDIO

R

(MONO)

AUDIO OUT

R

(MONO)

CONTROL PORT

L

L

L

USB

INPUT 1

INPUT 2INPUT 3

14

CONNECTING PROJECTOR

CONNECTING TO COMPUTER

IBM-compatible computers or Macintosh computers (VGA / SVGA / XGA / SXGA/UXGA)

VGA Cable

Monitor Output

Desktop type Laptop type

Control Cable
for Serial Port

Audio Cable

(stereo)

✽

Serial port

PS/2 port

Audio Output

Audio Input

AUDIO OUT

Use one of these Control
Cables corresponding
with terminal of your
computer.

MAC/VGA
Adapter

Set slide switches
following chart
below.

ADB port

Cables used for connection (✽ = Cables are not supplied with this projector.)

• VGA Cable (HDB 15 pin)

•

Control Cable for PS/2 port, Serial port, or ADB port

• MAC/VGA Adapter, DVI/VGA Adapter

• DVI Cable

• BNC Cable (BNC x 5)

✽

• Audio Cables (RCA x 2) ✽

Control Cable

for PS/2 Port

Control Cable

for ADB Port

Audio Cable

(stereo)

✽

NOTE :

When connecting cable, power cords of both a
projector and external equipment should be
disconnected from AC outlet. Turn a projector
and peripheral equipment on before computer is
switched on.

Terminals of
a Projector

Audio Amplifier

Audio Speaker

(stereo)

External Audio Equipment

Monitor Output

DVI Cable

BNC Cable

✽

Monitor Output

Set switches as shown in table below depending on
RESOLUTION MODE that you want to use before
your turn on a projector and computer

13"MODE (640 x 480)
16"MODE (832 x 624)
19"MODE (1024 x768)
21"MODE (1152 x 870)

ON

OFF

OFF OFF OFF OFF
OFF OFFOFF

OFF OFF OFF

ON
ON

ON ON ON

OFF

OFF OFF

ON ON

ON

ON

1 2 3 4 5 6

MODE

SWITCHES

Switches of
MAC/VGA Adapter

MAC/VGA ADAPTER

DVI/VGA
Adapter

Terminal

Terminal

Terminal

ON

OFF

ON

DIP

1

2 3 4 5 6

R/C JACK

RESET

DVI

R/Pr G/Y B/Pb H/HV V

C

VIDEO/Y

SERIAL PORT IN

SERIAL PORT OUT

S-VIDEO

AUDIO

R

AUDIO

R

AUDIO

R

AUDIO OUT

R

L

(MONO)

L

(MONO)

L

(MONO)

L

(MONO)

CONTROL PORT

CONTROL PORT

USB

INPUT 1

INPUT 2INPUT 3

15

CONNECTING PROJECTOR

CONNECTING TO VIDEO EQUIPMENT

Video Source (example)

Video Cassette Recorder

Video Disc Player

Video

Cable ✽

S-VIDEO

Cable ✽

Audio Amplifier Audio Speaker (stereo)

Audio Cable

(Stereo) ✽

S-VIDEO Output

Audio Input

Cables used for connection

• Video Cable (BNC x 1, BNC x 2 or BNC x 3) ✽

• S-VIDEO Cable ✽

• Audio Cable (RCA x 2) ✽

(✽ = Cables are not supplied with this projector.)

NOTE :

When connecting cable, power cords of both a
projector and external equipment should be
disconnected from AC outlet. Turn a projector
and peripheral equipment on before computer is
switched on.

Audio Output

Y

Pb/Cb

Pr/Cr

RL

External Audio Equipment

AV AUDIO IN

S-VIDEO

Pr/Cr-Y-Pb/Cb

VIDEO

AUDIO OUT

Component video output equipment.

(such as DVD player or

high-definition TV source.)

Composite

Video Output

Component Video Output

Audio Cable

(Stereo) ✽

Video

Cable ✽

Video

Cable ✽

Separate Y/C

Video Output

Y

C

Y-C

Terminals of
a Projector

R/Pr G/Y B/Pb H/HV V

C

VIDEO/Y

DVI

S-VIDEO

AUDIO

L

R

(MONO)

AUDIO

R

L

(MONO)

AUDIO

R

L

CONTROL PORT

INPUT 1

CONTROL PORT

INPUT 2INPUT 3

(MONO)

AUDIO OUT

R

(MONO)

L

RESET

R/C JACK

SERIAL PORT IN

SERIAL PORT OUT

USB

16

ONON ---- OFFOFF

MENU

INPUT

SELECT

LENS
SHIFT

VOLUME

IMAGE

FOCUS

AUTO
PC ADJ.

ZOOM

LAMP

REPLACE

WARNING

TEMP.

READY

LAMP

TOP CONTROLS AND INDICATORS

Used to open or close
MENU operation. (P19,

20)

MENU BUTTON

IMAGE BUTTON

READY INDICATOR

SELECT BUTTON

POWER ON–OFF BUTTON

INPUT BUTTONS

WARNING TEMP. INDICATOR

LAMP INDICATOR

POINT BUTTONS

LAMP REPLACE INDICATOR

Used to select image
level. (P31, 36)

Lights green when a
projector is ready to be
turned on. And it
flashes green in Power
Management mode.
(P40)

Becomes dim when a
projector is turned on.
And bright when a
projector is in stand-by
mode.

Turns to yellow when
life of a projection lamp
draws to an end. (P44-

46)

Flashes red when
internal projector
temperature is too
high. (P42)

Used to select input
source. (P25)

Used to select an item or adjust
value in ON-SCREEN MENU. They
are also used to pan image in
DIGITAL ZOOM

+/– mode. (P33)

Used to execute item
selected. It is also used
to expand / compress
image in DIGITAL
ZOOM mode. (P33)

Used to turn a projector
on or off. (P21)

Used to adjust zoom.
(P22)

FOCUS BUTTONS

Used to adjust focus.
(P22)

ZOOM BUTTONS

This projector has CONTROL BUTTONS (TOP CONTROLS) and INDICATORS on its top.

BEFORE OPERATION

LENS SHIFT BUTTON

Used to select LENS SHIFT
function. (P22)

AUTO PC ADJ. BUTTON

Use to operate AUTO
PC Adjustment function.
(P28)

VOLUME BUTTONS

Used to adjust volume.
(P24)

TOP CONTROL AND
INDICATORS