Sanyo PLC-XD2600 User Manual 2

Ultra Portable Multimedia Projector

Easy Setup for Education and Business Use

PLC-XD2600 PLC-XD2200

Easy Setup Easy to Use

Speciﬁcations

Model name

PLC-XD2600 PLC-XD2200

Panel 0.55 inch TFT p-Si x 3 Resolution 1024 x 768 Lamp wattage 215 W UHP Brightness (Lamp mode:

“High” & Image mode: “Dynamic”)

2600 lm 2200 lm

Contrast

500:1

Uniformity

85% (corner to center) Projection lens F2.0 - 2.15 f=0.72 - 0.87 inch Screen Size 40” - 300” (4.3 - 38.7 ft) Zoom / Focus (10.8 - 12.8 ft) 1:1.2 Manual driven SD/HDTV signals 480i, 480p, 575i, 575p, 720p, 1035i, 1080p Color systems PAL / SECAM / NTSC / NTSC4.43 / PAL-M/N Video Signal Composite, S-Video, Component

Computer Terminal

Dsub-15 x 1: Analog RGB Input

(Component and S-video input with conversion cable),

D-sub15 x 1: AnalogRGB Input or Monitor out

Video Terminal RCA x 1: Composite video Computer compatibility UXGA / WXGA / SXGA / XGA / SVGA / VGA / MAC

Audio

Mini-Jack (stereo) x 1: Input (for Computer & Video),

RCAx2

(R,L), Mini-Jack (stereo) x 1: Output (variable) Communication Terminal RJ-45 (LAN), Dsub-9pin (RS 232C) Presentation Tool Freeze / Digital Zoom / No Show / etc Other Features Progressive, 3-2 & 2-2 pull down, User Logo

Scanning frequency

H sync 15 - 100 kHz, V sync 50 - 100 Hz

Dot clock 140 MHz Sound output 1.0 W Mono Fan Noise 29 dBA (Lamp mode “Eco”) Voltage AC10 0-120V, AC 200-240V, 50/60Hz

Power consumption

100-120 V AC,

192 W (Eco) / 266 W /

284 (High)

100-120 V AC,

186 W (Eco) / 230 W /

261 (High)

Standby Power consumption

100-120 V 0.4 W (Standby mode: Eco)

200-240 V 0.7 W (St andby mode: Eco) Dimensions (W x H x D) 13.1 x 3.4 x 9.7 inch Weight 5.7 lbs Lamp Life*3

(hours Normal/Eco)

6000H (Eco)

Included accessories

Quick reference guide, Owner’s manual (CD-ROM),

CD-ROM read me note, CD-ROM (PJ-Net Manager

application software), PIN code Label, Lamp

replacement label, UL cable card, Power cord,

Computer cable (Dsub 15-Dsub15), Remote control,

AAA Battery x 2, Lens cap

PLC-XD2600 / XD2200 provides a “Auto Setup Function” that does auto keystone correction by searching for an input signal and detecting projector incline, reducing setup time. Furthermore, the “Screen Guidance Function” allows projector set up according to the displayed guidance. This function provides an easy guide to using the projector. The projector can be turned off by unplugging the cable without pressing the power button. You can pack up and leave quickly.

Environment friendly power consumption in standby mode (Eco): 0.4 W

SANYO’s first ecological data projector with 0.4 W standby power consumption. By redesigning electrical circuits, a standby power consumption savings of about 80% was achieved compared to a conventional model.

XD2600 / XD2200

Wired LAN (RJ-45) for projector control

This model is equipped with Wired LAN (RJ-45) that allows you to manage and control projector via Network. It is possible to check the operating time of lamp and manage the warning notification by Email. Power ON/OFF and switching of input signal can be controlled. You can save a lot of time without manage and control.

Light Weight and Compactness for Greater Portability

The compact design (13.1 x 3.4 x 9.7 inch) and light weight body (5.7 lbs) let you make presentations almost anywhere.

Bright Images Even In a Well-Lit Room

The PLC-XD2600 provides outstanding brightness of 2,600 lumens, while the PLC-XD2200 delivers 2,200 lumens of brightness.

Ultra-Long Unfailing Lamp: 6000H (eco)

The PLC-XD2600/2200 allows saving your total cost of ownership with equipping ultra long life lamp. This lump enable to be used 6000H with eco mode in idea condition.

Other Features

• D-sub 15pin for Input (VGA), D-sub 15pin for Input or Monitor out

• 18 languages (Operation menu)

• Color board (4 color) mode, Security: PIN code lock, Key lock

PLC-XD2600 PLC-XD2200

Replacement Lamp Type No.: 610 349 7518 *1 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. *2 For analog signal only, limitations on certain output signals. Does not support all types of input signals. * Specifications as of April 2010, subject to change. *3 Lamp life may vary due to room conditions, usage, and maintenance. The replacement time is a general estimate.

The brightness of a lamp usually decreases over time and use. * All product names and company names are trademarks or registered trademarks of their respective companies.

SANYO Presentation Technologies

Toll free:

888-337-1215 www.sanyoprojectors.com