Sanyo PLC-WM4500S, PLC-WM4500L, PLC-WM4500 User Manual
Multimedia Projector
MODEL PLC-WM4500
PLC-WM4500L
◊
Projection lens is optional.
◊
Network Supported
Refer to the Owner's Manual below for
details about network function.
£ Network Set-up and Operation
Owner’s Manual
Features and Design
This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use.
This projector utilizes built-in multimedia features, a palette of 1.07 billion colors, and matrix liquid crystal display
(LCD) technology.
t Functionally Rich
This projector has many useful functions such
as lens shifting, ceiling and rear projection,
perpendicular omnidirectional projection, variety of
lens options, etc.
t Multi-use Remote Control
Use the remote control as wired and wireless, or as
a PC wireless mouse. Eight remote control codes
and selectable pointer shapes are also available.
t Simple Computer System Setting
The projector has the Multi-scan system to conform
to almost all computer output signals quickly (p.36).
Supported resolution up to WUXGA.
t Useful Functions for Presentation
Digital zoom function allows you to focus on the
crucial information during a presentation (pp.29, 43).
t Security Function
The Security function helps you to ensure security
of the projector. With the Key lock function, you can
lock the operation on the side control or remote
control (p.61). PIN code lock function prevents
unauthorized use of the projector (pp.61-62).
t Power Management
t Motor-driven Lens Shift
Projection lens can be moved up, down, right and
left with the motor-driven lens shift function. This
function makes it easy to provide projected image
where you want. Zoom and focus can also be
adjusted with a motor-driven operation. (p.27)
t Multilanguage Menu Display
Operation menu is available in 12 languages;
English, German, French, Italian, Spanish,
Portuguese, Dutch, Swedish, Russian, Chinese,
Korean, and Japanese (p.51).
t Logo Function
The Logo function allows you to customize the
screen logo (pp.52-54). You can capture an image
for the screen logo and use it for the starting-up
display or between presentations.
t Pointer Function
Remote control pointer function. This function helps
you to make a smart presentation on a projected
screen.
t Multiple Interface Terminals
The projector has several interface terminals that
can support various types of equipment and signals
(p.11).
The Power management function reduces power
consumption and maintains lamp life (p.59).
t Picture in Picture Function
This projector is capable of projecting two images
simultaneously by using either built-in P in P mode
or P by P mode (pp.55-56).
PNote:
• The On-Screen Menu and figures in this manual may differ slightly from the product.
• The contents of this manual are subject to change without notice.
t Closed Caption
This is a printed version of the program sound or
other information displayed on the screen. You can
turn on the feature and switch the channels (p.63).
2
Table of Contents
Features and Design . . . . . . . . . . . . . . . 2
Table of Contents . . . . . . . . . . . . . . . . . . 3
To The Owner . . . . . . . . . . . . . . . . . . . . . 4
Safety Instructions . . . . . . . . . . . . . . . . . 5
Air Circulation 6
Installing the Projector in Proper Directions 7
Moving the Projector 8
Cautions in Handling the Projector 8
Compliance . . . . . . . . . . . . . . . . . . . . . . . 9
Part Names and Functions . . . . . . . . . 10
Front 10
Back 10
Bottom 10
Rear Terminal 11
Side Control and Indicators 12
Remote Control 13
Remote Control Battery Installation 15
Remote Control Receivers and Operating Range 15
Wired Remote Control Transmitter 15
Remote Control Code 16
Adjustable Feet 16
Installation. . . . . . . . . . . . . . . . . . . . . . . 17
Positioning the Projector 17
Lens Shift Adjustment 17
Lens Installation 18
Connecting to a Computer
(Digital and Analog RGB) 19
Connecting to Video Equipment
(Video, S-video, HDMI)
Connecting for Audio Signal 21
Connecting the AC Power Cord 22
20
Basic Operation . . . . . . . . . . . . . . . . . . 23
Turning On the Projector 23
Turning Off the Projector 24
How to Operate the On-Screen Menu 25
Menu Bar 26
Operating with Projector Control 27
Sound Adjustment 28
Operating with Remote Control 29
Keystone Correction 31
Pointer Function 32
Wireless Mouse Operation 32
Input Selection . . . . . . . . . . . . . . . . . . . 33
Direct Operation 33
Computer Input Source Selection 34
Video Input Source Selection 35
Computer Input. . . . . . . . . . . . . . . . . . . 36
Computer System Selection 36
Auto PC Adjustment 37
Manual PC Adjustment 38
Image Level Selection 40
Image Adjustment 41
Screen Size Adjustment 42
Video Input . . . . . . . . . . . . . . . . . . . . . . 45
Video System Selection 45
Image Level Selection 46
Image Adjustment 47
Screen Size Adjustment 49
Setting . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Setting 51
Maintenance and Care . . . . . . . . . . . . . 65
Filter Instructions 65
Replacing the Filter Cartridge 66
Resetting the Filter Counter 67
Lamp Replacement 68
Cleaning the Projection Lens 70
Cleaning the Projector Cabinet 70
Warning Indicators 71
Appendix . . . . . . . . . . . . . . . . . . . . . . . . 72
Troubleshooting 72
Menu Tree 75
Indicators and Projector Condition 78
Compatible Computer Specifications 81
Technical Specifications 83
Optional Parts 84
Lens Replacement 84
PJ Link Notice 84
Configurations of Terminals 85
PIN Code Number Memo 86
Dimensions 87
List of Picture in Picture 88
Serial Control Interface 88
Trademarks
Each name of corporations or products in this book is either a registered trademark or a trademark of its respective
corporation.
3
To The Owner
0.7’(20cm)
1.5’(50cm) 3’(1m) 3’(1m)
Before installing and operating the projector, read this
manual thoroughly.
The projector provides many convenient features and
functions. Operating the projector properly enables
you to manage those features and maintains it in good
condition for many years to come.
Improper operation may result in not only shortening the
product life, but also malfunctions, fire hazard, or other
accidents.
If your projector seems to operate improperly, read this
manual again, check operations and cable connections
and try the solutions in the “Troubleshooting” section
in the back of this manual. If the problem still persists,
contact the dealer where you purchased the projector or
the service center.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE
PARTS INSIDE EXCEPT LAMP
REPLACEMENT. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
WARNING: l THIS APPARATUS MUST BE EARTHED.
l TO REDUCE THE RISK OF FIRE OR
– This projector produces intense light from the projection
lens. Do not stare directly into the lens, otherwise eye
damage could result. Be especially careful that children do
not stare directly into the beam.
– Install the projector in a proper position. Otherwise it may
result in a fire hazard.
– Allowing the proper amount of space on the top, sides,
and rear of the projector cabinet is critical for proper
air circulation and cooling of the unit. The diagrams
shown here indicates the minimum space required. If
the projector is to be built into a compartment or similarly
enclosed, these minimum distances must be maintained.
– Do not cover the ventilation slots on the projector. Heat
build-up can reduce the service life of your projector, and
can also be dangerous.
Safety Precaution
ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR
MOISTURE.
SIDE and TOP REAR
THIS SYMBOL INDICATES THAT
DANGEROUS VOLTAGE CONSTITUTING A
RISK OF ELECTRIC SHOCK IS PRESENT
WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE
ARE IMPORTANT OPERATING AND
MAINTENANCE INSTRUCTIONS IN THE
OWNER'S MANUAL WITH THIS UNIT.
FOR EU USERS
The symbol mark and recycling systems described below apply to EU countries and do not apply to countries in other areas of the world.
Your product is designed and manufactured with high quality materials and components which can be recycled and/or
reused.
The symbol mark means that electrical and electronic equipment, batteries and accumulators, at their end-of-life, should
be disposed of separately from your household waste.
Note:
If a chemical symbol is printed beneath the symbol mark, this
chemical symbol means that the battery or accumulator contains a heavy metal at a certain concentration. This will be
indicated as follows: Hg: mercury, Cd: cadmium, Pb: lead
In the European Union there are separate collection systems
for used electrical and electronic equipment, batteries and
accumulators.
Please, dispose of them correctly at your local
community waste collection/recycling centre.
Please, help us to conserve the environment
we live in!
– If the projector is unused for an extended time, unplug the
projector from the power outlet.
– Do not project the same image for a long time. The
afterimage may remain on the LCD panels by the
characteristic of panel.
CAUTION ON HANGING FROM THE CEILING
DO NOT SET THE PROJECTOR IN GREASY, WET,
OR SMOKY CONDITIONS SUCH AS IN A KITCHEN
TO PREVENT A BREAKDOWN OR A DISASTER. IF
THE PROJECTOR COMES IN CONTACT WITH OIL OR
CHEMICALS, IT MAY BECOME DETERIORATED.
CAUTION
Not for use in a computer room as defined in the
Standard for the Protection of Electronic Computer/
Data Processing Equipment, ANSI/NFPA 75.
READ AND KEEP THIS OWNER’S MANUAL FOR
LATER USE.
4
Safety Instructions
All the safety and operating instructions should be read before
the product is operated.
Read all of the instructions given here and retain them for
later use. Unplug this projector from AC power supply before
cleaning. Do not use liquid or aerosol cleaners. Use a damp
cloth for cleaning.
Follow all warnings and instructions marked on the projector.
For added protection to the projector during a lightning storm,
or when it is left unattended and unused for long periods of
time, unplug it from the wall outlet. This will prevent damage
due to lightning and power line surges.
Do not expose this unit to rain or use near water, for example,
in a wet basement, near a swimming pool, etc..
Do not use attachments not recommended by the
manufacturer as they may cause hazards.
Do not place this projector on an unstable cart, stand, or
table. The projector may fall, causing serious injury to a child
or adult, and serious damage to the projector. Use only with
a cart or stand recommended by the manufacturer, or sold
with the projector. Wall or shelf mounting should follow the
manufacturer's instructions, and should use a mounting kit
approved by the manufacturers.
An appliance and cart combination
should be moved with care. Quick stops,
excessive force, and uneven surfaces
may cause the appliance and cart
combination to overturn.
This projector should be operated only from the type of power
source indicated on the marking label. If you are not sure of
the type of power supplied, consult your authorized dealer or
local power company.
Do not overload wall outlets and extension cords as this can
result in fire or electric shock. Do not allow anything to rest on
the power cord. Do not locate this projector where the cord
may be damaged by persons walking on it.
Do not attempt to service this projector yourself as opening
or removing covers may expose you to dangerous voltage
or other hazards. Refer all servicing to qualified service
personnel.
Unplug this projector from wall outlet and refer servicing to
qualified service personnel under the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the projector.
c. If the projector has been exposed to rain or water.
d. If the projector does not operate normally by following
the operating instructions. Adjust only those controls that
are covered by the operating instructions as improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to
restore the projector to normal operation.
e. If the projector has been dropped or the cabinet has been
damaged.
f. When the projector exhibits a distinct change in
performance-this indicates a need for service.
When replacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer that have the same characteristics as the
original part. Unauthorized substitutions may result in fire,
electric shock, or injury to persons.
Slots and openings in the back and side of the cabinet are
provided for ventilation, to ensure reliable operation of the
equipment and to protect it from overheating.
The openings should never be covered with cloth or other
materials, and the bottom opening should not be blocked
by placing the projector on a bed, sofa, rug, or other similar
surface. This projector should never be placed near or over a
radiator or heat register.
This projector should not be placed in a built-in installation
such as a book case unless proper ventilation is provided.
Never push objects of any kind into this projector through
cabinet slots as they may touch dangerous voltage points
or short out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the projector.
Do not install the projector near the ventilation duct of airconditioning equipment.
Upon completion of any service or repairs to this projector,
ask the service technician to perform routine safety checks to
determine that the projector is in safe operating condition.
NOTE FOR CUSTOMERS IN THE US
Hg LAMP(S) INSIDE THIS PRODUCT CONTAIN
MERCURY AND MUST BE RECYCLED OR DISPOSED
OF ACCORDING TO LOCAL, STATE OR FEDERAL
LAWS.
5
Safety Instructions
Openings in the cabinet are provided for ventilation. To
ensure reliable operation of the product and to protect it
from overheating, these openings must not be blocked or
covered.
CAUTION
Hot air is exhausted from the exhaust vent. When using or
installing the projector, the following precautions should be
taken.
– Do not put any flammable object or spray can near the
projector, hot air is exhausted from the air vents.
– Keep the exhaust vent at least 3’ (1 m) away from any
objects.
– Do not touch peripheral parts of the exhaust vent,
especially screws and metallic parts. These areas will
become hot while the projector is being used.
– Do not put anything on the cabinet. Objects put on the
cabinet will not only get damaged but also may cause
fire hazard by heat.
Cooling fans are provided to cool down the projector.
The fans’ running speed is changed according to the
temperature inside the projector.
Air Circulation
IMPORTANT!
Filter Maintenance!!
The projector uses a lamp which generates significant
heat. The cooling fans and air vents are provided to
dissipate the heat by drawing air into the housing and the
filter is located in the intake vents to prevent dust from
getting inside of the projector.
In order to care for the projector appropriately, regular
cleaning is required. Remove any dirt or dust that has
accumulated on the projector.
If the projector reaches a time set in the timer setting, a
Filter warning icon (Fig. 1) appears on the screen and
WARNING FILTER indicator on the top panel lights up (see
below), indicating that the filter replacement is necessary.
Blocking the air vents and leaving the projector uncleaned
for a long time may not only damage the projector and may
require costly repairs but may also cause accidents or fire.
For maintenance of the filter, refer to “Filter counter” on
page 64 and “Maintenance and Care” on pages 65-67.
Air Intake Vent
Exhaust Vent
(Hot air exhaust)
Air flow
Damages to the projector caused by using an
uncleaned filter or improper maintenance will void the
warranty on the projector.
Top Panel
Fig. 1 Filter warning icon
WARNING FILTER
indicator
6
10˚
10˚
10° 10°
10°
10°
Safety Instructions
Installing the Projector in Proper Directions
Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe accident
or fire hazard.
This projector can project the picture in upward, downward, or inclined position in perpendicular direction to the horizontal
plane. When installing the projector in downwardly inclined position, install the projector bottom side up.
PNote:
To inverse or reverse the image, set the ceiling function to On. (pp. 44, 50)
Positioning Precautions
Avoid positioning the projector as described below when installing.
Do not tilt the projector more than 10
degrees from side to side.
Do not put the projector on either side
to project an image.
In upward projection, do not tilt
the projector over 10 degrees
right and left.
In downward projection, do not
tilt the projector over 10 degrees
right and left.
CAUTION ON CEILING MOUNTING
For ceiling mounting, you need the ceiling mount kit designed for this projector. When not mounted properly,
the projector may fall, causing hazards or injury. For details, consult your dealer. The warranty on this projector
does not cover any damage caused by use of any non-recommended ceiling mount kit or installation of the
ceiling mount kit in an improper location.
7
Safety Instructions
Notes on protector
Remove the protector on the lens before use, and keep it for later use. For
transportation, press and hold the LENS button or LENS SHIFT button to
adjust the lens to the central position when four arrows turn to red, and then
attach the protector to protect the lens (Only for PLC-WM4500).
Use the handle grip when moving the projector.
Retract the adjustable feet to prevent damage to the lens and
cabinet when carrying.
When this projector is not in use for an extended period, put it into a
suitable case to protect the projector.
Moving the Projector
Protector
CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR
– Do not drop or bump the projector, otherwise damages or malfunctions may result.
– When carrying the projector, use a suitable carrying case.
– Do not transport the projector by courier or any other transport service in an unsuitable transport case. This
may cause damage to the projector. For information about transporting the projector by courier or any other
transport service, consult your dealer.
– Do not put the projector in a case before it is cooled enough.
Cautions in Handling the Projector
Do not hold the lens or the lens compartment tube when lifting or
moving the projector. Doing so may cause damage to the lens and
the projector.
Care must be taken when handling the projector; do not drop,
bump, subject it to strong forces, or put other things on the cabinet.
CAUTION
8
Projection lens is a motorized lens. Please note the
followings when using the projector.
l Do not touch the lens while it is moving as this
could cause injury to the fingers.
l Never allow children to touch the lens.
Do not hold the lens and the peripheral part.
ASA
GROUND
Compliance
Federal Communications Commission Notice
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such
changes or modifications should be made, you could be required to stop operation of the equipment.
Model Number : PLC-WM4500, PLC-WM4500L
Trade Name : Sanyo
Responsible party : SANYO NORTH AMERICA CORPORATION
Address : 21605 Plummer Street, Chatsworth, California 91311, U.S.A.
Telephone No. : (818)998-7322
AC Power Cord Requirement
The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.
AC Power Cord for the United States and Canada:
AC Power Cord used in the United States and Canada is listed by the Underwriters
Laboratories (UL) and certified by the Canadian Standard Association (CSA).
AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure that the
plug will fit into the power outlet. Do not try to defeat this safety feature. Should you be unable
to insert the plug into the outlet, contact your electrician.
AC Power Cord for the United Kingdom:
This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of
the plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating,
marked thus
is required, ensure it is of the same colour as that visible on the pin face of the plug (i.e. red or orange). Fuse covers
are available from the Parts Department indicated in your User Instructions.
If the plug supplied is not suitable for your socket outlet, it should be cut off and destroyed.
The end of the flexible cord should be suitably prepared and the correct plug fitted.
WARNING: A PLUG WITH BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED IN A LIVE SOCKET
OUTLET.
The Wires in this mains lead are coloured in accordance with the following code:
Green-and-yellow ············· Earth
Blue ································· Neutral
Brown ······························ Live
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying
the terminals in your plug proceed as follows:
The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked by the letter
E or by the safety earth symbol or coloured green or green-and-yellow.
The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.
WARNING: THIS APPARATUS MUST BE EARTHED.
. If the fuse cover is detachable, never use the plug with the cover omitted. If a replacement fuse cover
THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE.
9
Part Names and Functions
Front
Back
①
②
③
① Lens Release Button
② Indicators
③ Lamp Cover
④ Speaker
⑤ Lens Cap
(for PLC-WM4500)
⑥ Projection Lens
(for PLC-WM4500)
⑦ Lens Mount Cover
(for PLC-WM4500L)
⑧ Infrared Remote Receiver (Front & Top)
⑨ Side Controls
④
⑩
⑥ ⑧⑤
⑦
⑫
⑪
⑩⑨
⑩ Exhaust Vent
CAUTION
⑬
Hot air is exhausted from the exhaust vent. Do
not put heat-sensitive objects near this side.
Bottom
⑪ Infrared Remote Receiver (Back)
⑫ Terminals and Connectors
⑬ Filter Cover & Air Intake Vent
⑭ Power Cord Connector
⑭
⑯
⑮ Hand Grip
⑯ Security Chain Hook
⑯
⑮
PNote:
This is not a handle for carrying the projector.
Do not carry the projector with this hook.
⑰ Adjustable Feet
10
⑰
⑰
Rear Terminal
Part Names and Functions
②
①
① INFRARED REMOTE RECEIVER (Back)
The infrared remote receiver is also located in the front and top
(pp.10, 15).
② LAN CONNECTION TERMINAL
Connect the LAN cable (refer to the owner’s manual of “Network
Set-up and Operation”).
③ CONTROL PORT CONNECTOR
When controlling the projector with RS-232C, connect the
control equipment to this connector with the serial control cable.
(p.19)
④ ANALOG OUT TERMINAL
This terminal can be used to output the incoming analog RGB
signal from INPUT 1-3 terminal to the other monitor (pp.19-20).
⑤ COMPUTER INPUT TERMINAL (ANALOG)
Connect the computer (or RGB scart) output signal to this
terminal (pp.19-20).
⑥ AUDIO OUTPUT JACK
This jack outputs the audio signal from computer or video or
HDMI equipment to external audio equipment (p.21).
⑦ R/C JACK
When using the wired remote control, connect the wired remote
control to this jack with a remote control cable (not supplied)
(p.15).
③ ④ ⑤ ⑧
⑩
⑪ ⑬
⑩ S-VIDEO INPUT JACK
Connect the S-VIDEO output signal from video
equipment to this jack (p.20).
⑪ VIDEO INPUT JACK
Connect the component or the composite video
output signal from video equipment to these
jacks (p.20).
⑫ AUDIO 3 JACKS (L(MONO)/R)
Connect the audio output signal from video
equipment connected to ⑩ or ⑪ to this jack.
For a mono audio signal (a single audio jack),
connect it to the L (MONO) jack (p.21).
⑬ AUDIO 1 JACK
Connect the audio output (stereo) signal from a
computer or video equipment (p.21).
⑭ AUDIO 2 JACK
Connect the audio output (stereo) signal from a
computer or video equipment (p.21).
⑮ USB CONNECTOR (Series B)
Use this connector when controlling a computer
with the remote control of the projector. Connect
the USB port of the computer to the USB ternimal
with a USB cable (not supplied) (p.19).
⑥ ⑦
⑭⑫⑨
◊
⑮
⑧ HDMI TERMINAL
Connect the HDMI signal (including sound signal) from video
equipment or the DVI signal from computer to this terminal (pp.19,
20).
is registered trademarks of HDMI
Licensing, LLC.
⑨ 5 BNC INPUT JACKS
Connect the component or composite video output signal from
video equipment to VIDEO/Y, Pb/Cb, and Pr/Cr jacks or connect
the computer output signal (5 BNC Type [Green, Blue, Red,
Horiz. Sync, and Vert. Sync.]) to G, B, R, H/V, and V jacks
(pp.19-20).
◊ Kensington Security Slot
This slot is for a Kensington lock used to deter
theft of the projector.
*Kensington is a registered trademark of ACCO
Brands Corporation.
11
Part Names and Functions
Side Control and Indicators
Side Control
①
②
③
④
⑤
① ON/STAND-BY button
Turn the projector on or off (pp.23-24).
⑦
⑥
Indicators (on the top panel)
⑧
⑨
⑩
⑪
⑫
⑬
⑨ LAMP indicator
Light red during operations.
② MENU button
Open or close the On-Screen Menu (p.25).
③ SELECT button
– Execute the selected item (p.25).
– Expand or compress the image in the Digital
zoom mode (p.43).
④
INFO. button
Display the information window on the screen
⑤ Point pqt u ( VOLUME – / + ) buttons
– Select an item or adjust the value in the On-
Screen Menu (p.25).
– Pan the image in Digital zoom + mode (p.43).
– Adjust the volume level (with Point t u buttons)
(p.28).
⑥ LENS button
Enter the focus, zoom, and lens shift adjustment
mode (p.27).
⑦ INPUT button
Select an input source (pp.33-35).
⑧ POWER indicator
– Light green while the projector is in stand-by mode.
– Light green during operations.
(p.27).
⑩ WARNING TEMP. indicator
Blink red when the internal temperature of the
projector exceeds the operating range (pp.71,
78-80).
⑪ WARNING FILTER indicator
– Blink fast when the filter cartridge is not
installed (pp.65, 80).
– Light orange when the filter counter reaches
a time set in the timer setting, urging
immediate filter cartridge replacement
(pp.64, 65, 80).
⑫
P-MANAGEMENT STAND-BY
Light blue when the projector is in the Power
management mode (pp.59, 78).
⑬ LAMP REPLACE indicator
Light orange when the projection lamp reaches
its end of life (pp.68, 79).
indicator
12
Remote Control
Part Names and Functions
③
②
④
⑤
⑥
⑦
⑧
⑨
①
⑬
⑭
⑫
⑪
⑩
① STAND-BY button
Turn the projector off (p.24).
② WIRED REMOTE jack
Connect the remote control cable (not supplied) to
this jack when using as a wired remote control.
③ SIGNAL EMISSION indicator
Light red while a signal is being sent from the
remote control to the projector.
④ ON button
Turn the projector on (p.23).
⑤ AUTO PC button
Automatically adjust the computer image to its
optimum setting (pp.29, 37).
⑥ INPUT button
Select a signal (pp.33-35).
⑦ MENU button
Open or close the On-Screen Menu (p.25).
⑧ SCREEN button
Select the screen size (p.29).
⑨ POINT pqt u ( VOLUME – / +, MUTE) buttons
– Select an item or adjust the value in the On-
Screen Menu (p.25).
– Pan the image in Digital zoom + mode (p.43).
– Adjust the volume level (with Point t u buttons)
or mute the sound (with Point q button.) (p.28).
⑩ MOUSE POINTER button
Move a pointer of the projector or a pointer for
wireless mouse operation (p.32).
⑪ SELECT button
– Execute the selected item (p.25).
– Expand or compress the image in the Digital
zoom mode (p.43).
⑫
NO SHOW button
Temporarily turn off the image on the screen (p.29).
⑬ INFO. button
Display the input source information (p.27).
⑭ L-CLICK button
Act as the left mouse button for wireless mouse
operation (p.32).
To ensure safe operation, observe the following
precautions:
– Do not bend, drop, or expose the remote control to
moisture or heat.
– For cleaning, use a soft dry cloth. Do not apply
benzene, thinner, spray, or any other chemical
materials.
13
Part Names and Functions
Remote Control
⑮
⑯
⑰
⑱
⑲
⑮ D.ZOOM button
⑳
㉑
㉖
㉕
㉔
㉓
㉒
Select the Digital zoom +/- mode and resize the
image (p.43).
⑯ INPUT 1- 3 buttons
Select an input source (INPUT 1 – INPUT 3)
(pp.33-35).
㉗
For PIN code
and remote
control code.
㉒ LENS SHIFT button
Select the Lens Shift function (p.29).
㉓ FREEZE button
Freeze the picture on the screen and mute the
sound (p.30).
14
⑰ KEYSTONE button
Correct keystone distortion (pp.31, 44, 50).
⑱ ZOOM pq buttons
Zoom in and out the images (p.29).
⑲ FOCUS buttons
Adjust the focus (p.29).
⑳ PIP button
Operate the Picture in Picture function. (pp.30,55-56)
㉑ RESET/ON/ALL-OFF switch
When using the remote control, set this switch to
“ON”. Set it to “ALL OFF” for power saving when
it is not in use. Slide this switch to “RESET” to
initialize the remote control code.
㉔ P-TIMER button
Operate the P-timer function (p.30).
㉕ R-CLICK button
Act as the right mouse button for wireless mouse
operation (p.32).
㉖ POINTER button
Act as the On-Off switch for the Pointer (pp.30, 32,
60).
㉗ NUMBER buttons
Act as number buttons. Use these buttons when
setting the remote control codes (p.16) or when
entering the PIN code numbers (pp. 23, 54, 62).
Part Names and Functions
Remote Control Battery Installation
Open the battery
compartment lid.
1 2 3
Press the lid downward and
slide it.
To ensure safe operation, please observe the following precautions :
ü Use two (2) AAA or LR03 type alkaline batteries.
ü Always replace batteries in sets.
ü Do not use a new battery with a used battery.
ü Avoid contact with water or liquid.
ü Do not expose the remote control to moisture or heat.
ü Do not drop the remote control.
ü If the battery has leaked on the remote control, carefully wipe the case clean and install new
batteries.
ü Risk of an explosion if battery is replaced by an incorrect type.
ü Dispose of used batteries according to the instructions or your local disposal rule or guidelines.
Install new batteries into
the compartment.
Two AAA size batteries
For correct polarity (+ and
–), be sure battery terminals
are in contact with pins in the
compartment.
Remote Control Receivers and Operating Range
Replace the
compartment lid.
Point the remote control toward the projector (to Infrared Remote
Receivers) when pressing the buttons. Maximum operating range
for the remote control is about 16.4’ (5 m) and 60 degrees in front,
back and top of the projector.
Infrared Remote Receivers are provided in front, back and top of of
the projector. You can conveniently use all of the receivers (pp. 10,
11, 59).
PNote:
When hanging the projector from the ceiling, select the Infrared
Remote Receiver which is located farther away from the fluorescent
light (p.59).
Wired Remote Control Transmitter
The remote control can be used as a wired remote control. Wired
remote control helps you use the remote control outside of the
operating range (16.4’/ 5 m). Connect the remote control and the
projector with the remote control cable (sold separately). Connected
with the remote control cable, the remote control does not emit
wireless signal.
16.4’
(5 m)
16.4’
(5 m)
15
Part Names and Functions
Remote Control Code
The eight different remote control codes (Code 1–Code 8) are assigned to this projector. Switching the remote control
codes prevents interference from other remote controls when several projectors or video equipment next to each other are
operated at the same time. Change the remote control code for the projector first before changing that for the remote control.
See “Remote control” in the Setting Menu on page 58.
Press and hold the MENU and a number button (1–8) for
1
more than five seconds to switch between the codes.
To initialize the remote control code, slide the RESET/ ON/
2
ALL-OFF switch to “RESET”, and then to “ON”. The initial
code is set to Code 1.
MENU button
Adjustable Feet
Projection angle can be adjusted up to 4.0 degrees with the
adjustable feet.
Rotate the adjustable feet and tilt the projector to the proper height;
to raise the projector, rotate the both feet clockwise.
To lower the projector or to retract the adjustable feet, rotate the
both feet counterclockwise.
To correct keystone distortion, press the KEYSTONE button on the
remote control or select Keystone from the menu (see pages 14,
31, 44, 50).
Number buttons
(1-8)
RESET/ON/ALL
OFF Switch
Press and hold the MENU and a number button
(1-8) that corresponds to the remote control code
for more than five seconds to switch between the
codes.
16
Adjustable Feet
Installation
100”
47.2’(14.4 m)
35.4’(10.8 m)
23.6’ (7.2 m)
11.8’ (3.6 m)
200”
300”
400”
250”
188”
125”
63”
40”
Max. Zoom
Min. Zoom
Screen Size
(W x H) mm
16:10 aspect ratio
Zoom (min.)
40”
Zoom (max.)
862 x 538
4.5'(1.4 m)
7.9'(2.4 m)
100”
2154 x 1346
11.8’ (3.6 m)
19.7' (6.0 m)
200”
4308 x 2692
23.6’ (7.2 m)
40.0' (12.2 m)
300”
6462 x 4039
35.4’(10.8 m)
60.0' (18.3 m)
400”
8616 x 5385
47.2’(14.4 m)
80.1' (24.4 m)
(Inch Diagonal)
(Center)
80.1' (24.4 m)
400”
4.5'(1.4 m)
60%
10%
Positioning the Projector
For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the screen. (for
PLC-WM4500)
PNote:
• The brightness in the room has a great influence on picture quality. It is recommended to limit ambient
lighting in order to obtain the best image.
• All measurements are approximate and may vary from the actual sizes.
Lens Shift Adjustment
Projection lens can be moved from side to side and up and down with the motor-driven lens shift function. This function
makes the positioning of images easy on the screen. (See page 27)
The display position
can be shifted upward
up to 60% elevation of
the display.
When the lens is shifted to top.
The display position can
be shifted to the left in
up to 10% width of the
display.
When the lens is shifted to leftmost.
The display position can
be shifted downward up
to 60% low level of the
display.
When the lens is shifted to bottom.
The display position can
be shifted to the right in
up to 10% width of the
display.
When the lens is shifted to rightmost.
Lens shift adjustable range
Lens shift center position
Shift range
17
Installation
Lens Installation
When replacing the lens or using an optional lens, install the lens by following the instructions below. Ask the
sales dealer for detailed information of the optional lens specifications.
Removing the lens
Shift the lens to the center position by using the Lens
1
shift function (p.27).
Turn off the projector and unplug the AC power cord.
2
While pressing the Lens release button on the top
3
of the cabinet, turn the lens counterclockwise until
it stops and pull it out slowly from the projector.
CAUTION
Be careful when handling the lens. Do not drop.
Lens release button
Attaching the lens to the projector
Remove the lens mount cover.
1
Fit the lens to the projector by aligning the red dot on
2
the lens with the red dot of the projector.
Slowly turn the lens clockwise until it clicks. Make sure
3
that the lens is fully inserted to the projector.
CAUTION
Do not press the lens release button when attaching
the lens.
NOTES ON LENS INSTALLATION
ü Do not touch or remove any parts except the lens and related parts. It may result in
malfunctions, electrical shock, fire hazard or other accidents.
ü Before installing or replacing the lens, check that the Model No. of the Projection Lens
matches to the projector.
ü For details of the lens and installation, contact the sales dealer where you purchased the
projector.
Red dots
18
Connecting to a Computer (Digital and Analog RGB)
Installation
Cables used for connection (
• VGA Cable (One cable is supplied.)
• HDMI-DVI cable ⁄
• BNC cable ⁄
Monitor Output
BNC
cable
Serial Cross
Serial out
cable
⁄
= Cables not supplied with this projector.)
• Serial Cross cable ⁄
• USB cable ⁄
Monitor Input
VGA
cable
Monitor Output
•
VGA
cable
DVI Output
HDMI-DVI
cable
USB port
USB
cable
G B R H/V V
Unplug the power cords of both the projector
and external equipment from the AC outlet
before connecting cables.
CONTROL PORT
HDMIANALOG INANALOG OUT
See the next page for the signals that can output to the ANALOG
•
OUT terminal.
USB
19
Installation
Connecting to Video Equipment (Video, S-video, HDMI)
Cables used for connection (
• Video cable (RCA x 1 or RCA x 3) ⁄
• BNC cable (BNC x 1 or BNC x 3) ⁄
• S-video cable ⁄
• Scart-VGA cable ⁄
• HDMI cable ⁄
Unplug the power cords of
both the projector and external
equipment from the AC outlet
before connecting cables.
Component
Composite
Video
Video Output
(Y, Pb/Cb, Cr/Pr)
BNC
cable
Component
Video Output
⁄
= Cables not supplied with this projector.)
Analog Out Signal Table
Input Terminal Monitor Out Cable
D-sub15
Input 1
HDMI
Input 2 5 BNC
RCA
Input 3
S-video
Video
RCA
cable
RGB (PC analog) YES
RGB (SCART) NO
HDMI NO
RGB YES
Video YES
Y, Pb/Cb, Pr/Cr YES
Y, Pb/Cb, Pr/Cr YES
S-video NO
Video YES
Composite
Video
Refer to the
Analog Out
Signal Table
(above).
S-video
Output
S-video
cable
⁄
⁄
⁄
⁄
RGB Scart
21-pin Output
Scart-
HDMI Output
VGA
cable
⁄
A cable with one
end D-sub 15 and
the other end (Black
box) compatible with
each equipment is
necessary.
HDMI
cable
20
Video Y - Pb/Cb - Pr/Cr
Y - Pb/Cb - Pr/Cr
Video
ANALOG OUT S-VIDEO
ANALOG IN
HDMI
Connecting for Audio Signal
Installation
Cables used for connection (
• Audio cable ⁄
Audio Output
Audio
cable
(stereo)
⁄
= Cables not supplied with this projector.)
External Audio Equipment
Audio Output
(R) (L)
Audio
cable
(stereo)
(R) (L)
Audio Input
Audio
cable
Audio
cable
(stereo)
AUDIO IN 1/2
(R) (L)
AUDIO OUT
(stereo)
Unplug the power cords of both the
projector and external equipment from the
AC outlet before connecting cables.
21
Installation
Connecting the AC Power Cord
This projector uses nominal input voltages of 100–240 V AC and
it automatically selects the correct input voltage. It is designed to
work with single-phase power systems having a grounded neutral
conductor. To reduce the risk of electrical shock, do not plug into
any other type of power system.
If you are not sure of the type of power being supplied, consult
your authorized dealer or service center.
Connect the projector with all peripheral equipment before turning
on the projector.
CAUTION
The AC outlet must be near this equipment and must be easily
accessible.
PNote:
Unplug the AC power cord when the projector is not in use. When
the projector is connected to an outlet with AC power cord, it is in
stand-by mode and consumes a little electric power.
Connect the AC power cord (supplied) to the
projector.
NOTE ON THE POWER CORD
AC power cord must meet the requirements of the country where you use the projector.
Confirm the AC plug type with the chart below and proper AC power cord must be used.
If the supplied AC power cord does not match your AC outlet, contact your sales dealer.
Projector side AC Outlet side
For Continental Europe
To the AC Outlet.
(200–240 V AC)
To POWER CORD
CONNECTOR on your
projector.
For the U.S.A. and Canada
Ground
To the AC Outlet.
(120 V AC)
For the U.K.
Ground
To the AC Outlet.
(200–240 V AC)
22
Basic Operation
Turning On the Projector
Complete peripheral connections (with a computer, VCR, etc.)
1
before turning on the projector.
Connect the projector’s AC power cord into an AC outlet. The
2
LAMP indicator lights red and the POWER indicator lights
green.
Press the ON/STAND-BY button on the side control or the ON
3
button on the remote control. The LAMP indicator dims and the
cooling fans start to operate. The preparation display appears
on the screen and the countdown starts.
After the countdown, the input source that was selected the last
4
time and the Lamp control status icon (see page 57) appear on
the screen.
If the projector is locked with a PIN code, PIN code input dialog
box will appear.
PNote:
• When the Logo select function is set to Off, the logo will not be
shown on the screen (p.52).
• When Countdown off or Off is selected in the Display function,
the countdown will not be shown on the screen (p.52).
• When the Input button function is set to Mode 3, the input signal
will be searched automatically (p.51).
• If you press the ON/STAND-BY button on the top control or
the remote control during the countdown period, you can skip
the countdown and go to the normal operations. In this case,
however, the brightness of the image needs some time to
stabilize after turning on the projector. The display may flicker
after turning on the lamp for the characteristics of the lamp. This
is normal operation and not a malfunction.
16
The preparation display will disappear after 30 seconds.
Selected Input Source and Lamp control
Input 1
RGB(PC analog)
Lamp control status
(See page 57 for Lamp control status.)
PNote:
• The Lamp replacement icon and the Filter warning icon
may appear on the screen depending on the usage
state of the projector.
• When the Picture in Picture function is set to User(1-
5), User(1-5), Input source, Lamp control status, Lamp
replacement icon and Filter warning icon will appear on
the screen for 10 seconds.
Enter a PIN code
Use the Point pq buttons on the side control or Number buttons
on the remote control to enter a number.
When using side control
Use the Point pq buttons on the side control to select a number.
Press the Point u button to fix the number and move the red
frame pointer to the next box. The number changes to ⁄. Repeat
this step to complete entering a four-digit number. After entering
the four-digit number, move the pointer to “Set”. Press the
SELECT button so that you can start to operate the projector.
When using remote control
Press the Number buttons on the remote control to enter a number
(p.14). When you complete entering a four-digit number, the
pointer moves to “Set”. Press the SELECT button so that you can
start to operate the projector.
If you fixed an incorrect number, use the Point t button to move
the pointer to the number you want to correct, and then enter the
correct number.
If you entered an incorrect PIN code, “PIN code” and the number
(⁄⁄⁄⁄) will turn red for a moment. Enter the correct PIN code all
over again.
PIN Code Input Dialog Box
After the OK icon disappears, you can operate the projector.
PNote:
• If the PIN code number is not entered within three
minutes after the PIN code dialog box appeared, the
projector will be turned off automatically.
• The "1234" is set as the initial PIN code at the factory.
23
Basic Operation
What is PIN code?
PIN (Personal Identification Number) code is a security code that
allows the person who knows it to operate the projector. Setting a
PIN code prevents unauthorized use of the projector.
A PIN code consists of a four-digit number. Refer to the PIN code
lock function in the Setting Menu on pages 61-62 for locking
operation of the projector with your PIN code.
CAUTION ON HANDLING PIN CODE
If you forget your PIN code, the projector can no longer
be started. Take a special care in setting a new PIN
code; write down the number in a column on page 86 of
this manual and keep it on hand. Should the PIN code
be missing or forgotten, consult your dealer or service
center.
Turning Off the Projector
Press the ON/STAND-BY button on the side control or the
1
STAND-BY button on the remote control, and Power off?
appears on the screen.
Press the ON/STAND-BY button on the side control or the
2
STAND-BY button on the remote control again to turn off the
projector. The LAMP indicator lights bright and the POWER
indicator turns off. After the projector is turned off, the cooling
fans operate for 90 seconds. You cannot turn on the projector
during this cooling down period.
When the projector has cooled down enough, the POWER
3
indicator lights green and then you can turn on the projector.
To unplug the AC power cord, wait until the projector is
completely cooled down.
TO MAINTAIN THE LIFE OF THE LAMP, ONCE YOU
TURN THE PROJECTOR ON, WAIT AT LEAST FIVE
MINUTES BEFORE TURNING IT OFF.
DO NOT UNPLUG THE AC POWER CORD WHILE
COOLING FANS ARE RUNNING OR BEFORE THE
POWER INDICATOR LIGHTS GREEN AGAIN.
OTHERWISE IT WILL RESULT IN SHORTENING OF
THE LAMP LIFE.
DO NOT OPERATE THE PROJECTOR CONTINUOUSLY
WITHOUT REST. CONTINUOUS USE MAY RESULT
IN SHORTENING THE LAMP LIFE. TURN OFF THE
PROJECTOR AND LET STAND FOR ABOUT AN HOUR
IN EVERY 24 HOURS.
Power off? disappears after 4 seconds.
PNote:
• When the Direct on function is set to On, the
projector will be turned on automatically by
connecting the AC power cord to an AC outlet (p.60).
• The running speed of cooling fans is changed
according to the temperature inside the projector.
• Do not put the projector in a case before the projector
is cooled enough.
• If the WARNING TEMP. indicator blinks red, see
“Warning Indicators” on page 71.
• The projector cannot be turned on during the cooling
period with the POWER indicator turned off. You can
turn it on again after the POWER indicator becomes
green again.
24
How to Operate the On-Screen Menu
Basic Operation
The projector can be adjusted or set via the On-Screen Menu.
The menus have a hierarchical structure, with a main menu that
is divided into submenus, which are further divided into other
submenus. For each adjustment and setting procedure, refer to
respective sections in this manual.
Press the MENU button on the side control or the remote
1
control to display the On-Screen Menu.
Use the Point pq buttons to highlight or select a main menu
2
item. Press the Point u or the SELECT button to access the
submenu items. (The selected item is highlighted in orange.)
Use the Point pq buttons to select the desired submenu item
3
and press the SELECT button to set or access the selected
item.
Use the Point pqt u buttons to adjust the setting or switch
4
between each option and press the SELECT button to activate
it and return to the submenu.
Side Control
MENU button
SELECT button
POINT buttons
Remote Control
MENU button
POINT buttons
SELECT button
Press the Point t button to return to the main menu. Press
5
the MENU button to exit the On-Screen Menu.
On-Screen Menu
Point
u
or SELECT
button
The currently
set item is
marked.
The selected item is
highlighted in orange.
25
Basic Operation
For detailed functions of each menu, see “Menu Tree” on pages 75-77.
Main Menu
①
Ç
É
Ñ
Ö
Ü
á
à
Menu Bar
Sub-Menu
â
ä
① Input
Used to select an input source (Input 1, Input 2, Input 3 ) (p.33).
Ç PC adjust
Used to adjust the parameters to match with the input signal format (pp.37-39).
É Image select
For computer source, used to select an image level among Dynamic, Standard, Real, and Image 1-10 (p.40).
For Video source, used to select an image level among Dynamic, Standard, Natural, Cinema, and Image 1-10 (p.46).
Ñ
Image adjust
For computer source, used to adjust the computer image. [Contrast/Brightness/Color temp./White balance (R/G/B)/
Offset(R/G/B)/Sharpness/Gamma/Reset/Store] (pp.41-42).
For Video or HDMI source, used to adjust the video image. [Contrast/Brightness/Color/Tint/Color temp./White
balance (R/G/B)/Offset (R/G/B)/Sharpness/Gamma/Noise Reduction/Progressive/Reset/Store] (pp.47-48).
Ö
Screen
For computer source, used to adjust the size of the image. [Normal/Full/Wide(16:9)/Zoom/True/Custom/Custom adj./
Digital zoom +/-/Keystone/Ceiling/Rear/Screen aspect/Reset] (pp.42-44).
For video or HDMI source, used to adjust the size of the image. [Normal/Full/Wide(16:9)/Zoom/Natural Wide/Custom/
Custom adj./Keystone/Ceiling/Rear/Screen aspect/Reset] (pp. 49-50).
Ü Sound
Used to adjust the volume or mute the sound (p.28).
á
Setting
Used to set the projector’s operating configurations (pp.51-64).
à Information
Display the input source information: Input, H-sync freq., V-sync freq., Screen, Language, Lamp status, Lamp counter,
Filter counter, Power management, Key lock, PIN code lock, Simple mode, Remote control, and SERIAL NO. (p.27).
â Network
See the owner’s manual of “Network Set-up and Operation”.
26
ä Guide
The key operation is displayed.
Zoom
Operating with Projector Control
Basic Operation
Lens Operation
The following lens operation can be made with the Lens button on
the side control.
Press the LENS button to enter each lens operation mode. The
selected adjustment display appears on the screen.
Zoom " Focus " Lens Shift "
Zoom Adjustment
Display Zoom on the screen. Use the Point pq buttons to
zoom in and out the image.
Focus Adjustment
Display Focus on the screen. Use the Point pq buttons to
adjust focus of the image.
Lens Shift Adjustment
Display Lens shift on the screen. Use the Point pqt u
buttons to position the screen to the desired point without having
picture distortion.
The screen can be moved up or down to 60 percent, or sideways
up to 10 percent from the central axis of the lens shift.
Press and hold the LENS button on the side control or the LENS
SHIFT button on the remote control for 5 seconds or more to
return the lens to the center position, after that the four white
arrows on the screen turn to red.
• • • • •
Side Control
INFO. button
LENS button
POINT buttons
Ô
Ô
PNote:
• The arrow disappears at the maximum lens shift in each
direction.
• The arrow turns red when the lens shift comes to the
center position of the screen.
INFO. button
Information display can be used to confirm the current operating
condition of the projector and the signal being projected through
the projector.
Press the INFO. button on the remote control to display the
information window on the screen. To hide the information
window, press the INFO. button again or press the MENU button.
The information window can also be selected from the
menu.
PNote:
• The H-sync freq. and V-sync freq. values described in the
figure may be different from the actual values.
• SERIAL NO. is used to service the projector.
Ô
Information Menu
27
Basic Operation
Sound Adjustment
Direct Operation
Volume
Press the VOLUME+/– buttons on the side control or on the
remote control to adjust the volume. The volume dialog box
appears on the screen for a few seconds.
Mute
Press the MUTE (Point q) button on the remote control to select
On to temporarily turn off the sound. To turn the sound back on,
press the MUTE (Point q) button again to select Off or press the
VOLUME +/– buttons. The Mute function is also effective for the
AUDIO OUT jack.
Menu Operation
Press the MENU button to display the On-Screen Menu. Use
1
the Point pq buttons to select Sound. Press the Point u or
the SELECT button to access the submenu items.
Use the Point pq buttons to select the desired submenu item
2
and press the SELECT button to access the selected item.
Side Control
Remote Control
Volume Dialog Box
VOLUME +/– buttons
VOLUME – button
VOLUME + button
MUTE (Point q) button
Approximate level
of the volume.
Volume
Press the Point u button to turn up the volume; press the Point t
button to turn down the volume.
Built-in SP
Press the Point pq buttons to switch the Built-in SP function On/
Off. When the Built-in SP sound is turned off, Off is displayed.
Mute
Press the SELECT button to switch the mute function On/Off.
When the sound is turned off, On is displayed. Press the VOLUME
+/– buttons again to turn the sound back on.
Press the Point q button to set the
Mute function On or Off. The dialog box
disappears after 4 seconds.
Sound Menu
28
Loading...