Sanyo MPR-514, MPR-514R, MPR-1014, MPR-1014R User Manual
Specifications
Model No.
Temperature range
External dimensions
[W x D x H] mm (inch)
Interior dimensions
[W x D x H] mm (inch)
Effective capacity
Exterior cabinet
Interior cabinet
Outer door
Cabinet insulation
Outer door lock
Shelves & Sliding racks
Cooling method
Evaporator
Condenser
Compressor
Refrigerant
Fan motor
for cooling
for condensing
Defrosting
Defrost heater
Net weight
MPR-514 / 514R MPR-1014 / 1014R
900 x 600 x 1790 1800 x 600 x 1790
(35.4” x 23.6” x 70.5”) (70.9” x 23.6” x 70.5”)
800 x 465 x 1300 1700 x 465 x 1300
(31.5” x 18.3” x 51.2”) (66.9” x 18.3” x 51.2”)
489 liters (17.3 cu.ft.) MPR-514 1033 liters (36.4 cu.ft.) MPR-1014
486 liters (17.2 cu.ft.) MPR-514R 1029 liters (36.3 cu.ft.) MPR-1014R
5 polyester-coated wire shelves 10 polyester-coated wire shelves
Load: 50kg per shelf (MPR-514) Load: 50kg per shelf (MPR-1014)
5 polyester-coated wire shelves 5 polyester-coated wire shelves
Load: 20kg per shelf Load: 50kg per shelf
5 polyester-coated sliding racks 10 polyester-coated sliding racks
Load: 20kg per rack (MPR-514R) Load: 20kg per rack (MPR-1014R)
Wire and tube, Tube on sheet Fin and tube
Hermetic type, output: 200W Hermetic type, output: 250W
For cooling: output 3W x 1 For cooling: output 3W x 2
For condenser: output 4W
73.8W x 2 141W
141kg (300lbs) MPR-514 243kg (536lbs) MPR-1014
147kg (313lbs) MPR-514R 255kg (562lbs) MPR-1014R
Dimensions
MPR-514
900
800 (inside)
158
(duct)
658
600 508
150 50
2°C to 14°C (Ambient temperature -5°C to 35°C)
Galvanised steel with baked on finish
Stainless steel
2 sliding doors
Double layer glass with heat reflection film
Rigid polyurethane foamed-in-place (HCFC free)
1
Forced cool air circulation
Fin and tube
R-134a (HFC) R-404A (HFC)
––
Forced type, fully automatic
MPR-1014R
158
300
(duct)
1800
1700 (inside)
158
(duct)
659
9
50600
50150
300
501350
465
415
1350
1300
1200
1790
1085
466 1202 122
Front elevation End section
• Appearance and specifications are subject to change without notice.
Caution: SANYO guarantees the product under certain warranty conditions. SANYO in no way shall be responsible for any loss of content or damage to content.
1790
440
Front elevation End section
1221202466
465
415
1300
1200
1078
440
(Unit : mm)
Options
• Automatic Temperature Recorders • External mounting Power Failure Alarm
MTR-0621LH (Strip Chart Type)
RP-06
MPR-S30
Recording Paper
Recorder Mounting Kit
MTR-G04 (Circular Type)
RP-G04
MPR-S7
SANYO Electric Co., Ltd., Biomedical Division, Gunma is certified for:
Quality management system: ISO9001 / Medical devices quality management system: ISO13485 / Environmental management system: ISO14001
RoHS (European Restriction of Hazardous Substances directives) compliant
Distributed by:
MPR-48B
• SANYO DAQ (Data Acquisition) System
MTR-480/MTR-2000/MPR-48B (as mounting bracket)
SANYO Electric Co., Ltd.
Biomedical Division
http://www.sanyo.co.jp/cmg/biomedical
©2008 SANYO Printed in Japan 2008.12 MA
SHR130
Stable and reliable environment control—the key to high-precision performance for
exacting storage or research requirements
Several factors are important to
assure the quality of
pharmaceuticals, samples and
reagents. These are storage
temperature, expiry date,
exposure to ultraviolet light and
humidity. Of these the most
important is storage temperature.
If the temperature is too high,
chemical changes can occur
which affect the quality of the
materials. If the temperature is
too low, there is a risk of
structural changes brought about
by freezing. Narrow and uniform
temperature control without
regard to ambient conditions is
very important. Don’t
compromise your results!
MPR-1014R
Equipped with sliding racks.
Effective capacity: 1,029 (36.3 cu. ft.)
2°C to 14°C
(Ambient temp. –5°C to 35°C)
2°C to 14°C
(Ambient temp. –5°C to 35°C)
MPR-514R
Effective capacity: 486 (17.2 cu. ft.)
Uniform Storage Temperature–Ambient Temperature
10
5
0
-5
Inside Temperature (°C)
-10
-5 0 10 20 30
Uniform Storage Temperature–Cycle Defrost
40
35
30
20
Temperature (°C)
10
5
0
SANYO MPR
Upper Limit of Cycle
Center of Cabinet
Lower Limit of Cycle
Ambient Temperature (°C)
SANYO MPR
Ambient Temp.
Inside Temp.
8 16 24 (hr)
Conventional Refrigerator
10
5
0
-5
Inside Temperature (°C)
-10
-10 0 10 20 30
Ambient Temperature (°C)
Conventional Refrigerator
40
35
30
20
Temperature (°C)
10
5
0
Ambient Temp.
Temp. Rise During
Defrost Cycle
8 16 24 (hr)
Upper Limit of Cycle
Center of Cabinet
Lower Limit of Cycle
Features of the MPR-514(R) and MPR-1014(R)
Uniform storage unaffected by
ambient temperature
Microprocessor controlled
An electronic sensor accurately
monitors chamber temperature and
feeds the information to the microprocessor for precise control at preset
temperature. Fans ensure gentle air
circulation to provide uniform top to
bottom temperature control after
frequent door openings. SANYO’s easily
calibrated, reliable and stable controls
make validation easier.
Plenums
SANYO’s plenum design features
uniform cold air flow distribution
throughout the chamber to ensure
temperature uniformity— essential for
validated storage requirements.
Remarkable cooling efficiency
A highly efficient hermetic compressor,
specially designed and developed by
SANYO, is utilized to provide powerful
and rapid cooling to maintain proper
temperature level.
User-friendly design: easy-viewing, easy-opening, and energy-saving
Ergonomic design
The ergonomic design of the MPR
series refrigerators provides a clear
view of stored items through the large
framed windows. The slim profile
allows for easy-reach retrieval of your
products. Users can choose from two
types to suit their needs; one with all
wire shelves or one with sliding racks
on one side.
Double-sensor temperature
management
The double-sensor control system with
alarm-exclusive sensor added to the
temperature control sensor always monitors the precise chamber temperature.
Safety is a SANYO standard
Even the best designed refrigerator
must be prepared for the unexpected.
Cabinet construction
•
View Window design with protective
film to prevent shattered glass from
scattering onto the floor. Also features
key locked doors.
Control safety devices
•
Audible and flashing LED visual alarms
alert you to the unlikely event of either a
high or low temperature condition.
An over-shooting prevention circuit
automatically switches off the fan
motor or heater, if the inside temperature rises abnormally.
Comprehensive alarms
•
In addition to Low/High temperature
alarms and door ajar alarm, power
failure alarm can be installed as an
option. Remote alarm terminal is also
provided as standard.
Control Panel
Worry-free cycle defrosting
system
With SANYO’s cycle defrost system,
defrosting is performed automatically
during compressor “off” cycles, and by
sensing frost levels. This way defrosting is performed only when required,
further protecting the contents against
unnecessary temperature rise. The
defrosting heater also acts as an
emergency heat source to prevent
samples from freezing.
HFC refrigerant & HCFC-free
insulation
SANYO biomedical equipment is
designed for low environmental impact.
The MPR-514 and 1014 series use HFC
refrigerant and the foamed-in-place
insulation is HCFC free.
Data Acquisition System
(optional)
The SANYO original DAQ (data
acquisition) system enables remote
monitoring of pharmaceutical
refrigerators.
Loading...