Sanyo MDF-C8V1 User Manual

V. I.P.™ Freezer

-80

-80˚C

Patented V

.I.P

84

Liter

3.0

cu.ft.

MDF-C8V1-80°C Ultra-Low Temperature

Temperature

(Ambient temp. 30°C)(Ambient temp. 30°C)

-80

-80˚C-80˚C

Effective capacity

84

84Liter

Patented V

Patented V.I.P.

(Vacuum Insulation Panel)

Personal size, space saving Ultra-

Liter

˚C

/

/

3.0

3.0cu.ft.

cu.ft.

.I.P

.

™

™

MDF-C8V1

Low Freezer with Improved
energy consumption

• New V.I.P. PLUS™ technology maximises storage
capacity

• Space-saving design enables effective use of
laboratory space

• Filterless structure makes cleaning unnecessary

• Alarms secure valuable samples safety

• Low noise design

• Achieves energy savings of approx. 40%*

*SANYO comparison

MDF-C8V1

Features

More advanced insulation system:
V.I.P. PLUS

SANYO’s more advanced insulation system
V.I.P. PLUS
ness of insulation to approximately one half
compared to conventional systems. Small
freezers such as MDF-C8V1 takes full
advantage of this feature.
Use of V.I.P. PLUS
the front, left, and right sides enables a
smaller installation space with the highest­class storage capacity ratio.

*SANYO comparison

Installation
space

™

™

enables reducing the thick-

™

insulation material on

MDF-C8V1Conventional model*

C

a

p

a

c

it

y

8

6

L

0.525m

2

C

a

p

a

8

4

0.377m

c

it

y

L

Newly developed single-compres-

Rated power consumption

sor system

Use of a newly developed single-compres­sor system achieves an approximately
40% reduction in power consumption and
enables low-noise operation.

MDF-C8V1

Conventional
model*

*SANYO comparison (115V, 60Hz/230V, 50Hz)

340W/330W

550W/600W

Specifications

Model
Temperature range

-60 to -80°C (1°C increments)

Maximum cooling performance
Exterior dimensions (W x D x H)
Interior dimensions (W x D x H)

550 x 685 x 945 mm (21.6” x 27.0” x 37.2”)
405 x 490 x 425 mm (15.9” x 19.3” x 16.7”)

Effective capacity
Net weight
Storage capacity
Outer door/Inner door
Insulation
Cooling system

Outer Lid: 1piece, Inner Lid: 1piece (PS + PE foam)

2” box: 42pcs. (IR-207C x 6 racks)

New VIP + Rigid polyurethane foam (HC)

New mixed refrigerant cooling system

Compressor
Refrigerant
Evaporator
Alarm system

• High/Low temp. alarm (±5°C to ±20°C) • Power failure alarm

• Remote alarm contact: DC30V, 2A

*Cooling performance is indicated by the temperature reached at the center of the freezer (at ambient temperature of 30°C with no load).

In order to use the freezer at a stable temperature for a long time, it is recommended that the temperature be set to at least 5°C higher
than the indicated lowest temperature. In addition, depending on the usage conditions, it may not be possible to reach the indicated
lowest temperature.

Caution:

SANYO guarantees the product under certain warranty conditions.

2

SANYO in no way shall be responsible for any loss of content or damage to content.

• Appearance and specifications are subject to change without notice.

MDF-C8V1

-80°C (Ambient temp. 30°C)

84 Liter (3.0 cu.ft.)

Approx. 67 kg (148 lbs.)

Rotary type, Output: 400W

HFC

Tube on sheet type

New cooling circuit enables
filterless structure

A new cooling circuit makes the
inconvenient customer maintenance
procedure of filter cleaning unnecessary.

Performance Data

Pull-down characteristics Pull-up characteristics during power failure CO2 backup system operation characteristics

40

Central air temp. in cabinet

20

Ambient temp. 30˚C, No-load

0
–20
–40
–60
–80

Temperature (˚C)

–100
–120

076528341

Time (hour)

20

0

–20

–40

–60

–80

Temperature (˚C)

–100

067532184

Dimensions [Unit : mm (inch)]

729 (28.7”)

58 (2.3”)

887 (34.9”)

945 (37.2”)

852 (33.5”)

35 (1.4”)

550 (21.6”)

405 (15.9”)

44 (1.7”)

430 (16.9”)

685 (27.0”)

490 (19.3”)

39 (1.5”)

Time (hour)

Options

LCO2 Back-up
system

CVK-UB4

Back-up system
mounting kit

MDF-UBK

20

15

10

Time (hour)

Ambient temp. and maintenance
of –70˚C by injection of LCO

5

525201510 30 35

Ambient temperature (˚C)

Temperature
recorders

Circular
recorder

MTR-G85

Sensor cover

MTR-C8

Inventory rack

Strip chart
recorder

MTR-85H

Recorder
mounting kit

MDF-S3085

(for MTR-85H)

IR-207C

2 (30kg)

SANYO Electric Co., Ltd., Biomedical Division, Gunma is certified for:

Quality management system: ISO9001 / Medical devices quality management system: ISO13485 / Environmental management system: ISO14001

RoHS (European Restriction of Hazardous Substances directives) compliant

Distributed by:

SANYO Electric Co., Ltd.

Biomedical Division

http://www.sanyo.co.jp/cmg/biomedical

©2008 SANYO Printed in Japan 2008.12 MA

SHR135