Sanyo MCO-CL User Manual

Sterisonic™ GxP
Series Cell Culture
Incubators

MCO-CL Integrated

Cooling Option

Features:

• The industry’s most integrated solution for below
ambient temperature incubation.

• Integrated cooling and air jacket design provides a
wide temperature range with precise control, stability
and uniformity.

www.sanyobiomedical.com

My Life. My Work. My Choice.

MCO-CL

INTEGRATED

COOLING

Sterisonic™GxP Series Integrated Cooling Option

The industry’s most complete cell culture solution for highly regulated applications or conventional
incubation. Now with, an integrated cooling option for +18ºC to +30ºC applications, while allowing for safe,
effective two-hour in situ H2O2 decontamination for fastest turn-around.

• SANYO’s integrated cooling option provides unmatched temperature stability and
control which can only be achieved with our patented Direct Heat and Air Jacket™
that surrounds the inner walls with a natural convection airow.

• This cooling option maintains high relative humidity and provides precise temperature

control for a wide range of applications.

• The unique cooling coil design allows for superior temperature uniformity and

temperature recovery during door openings. In addition, the MCO-CL permits
H2O2 decontamination of interior components for GMP applications and protocols.

MCO-CL Airow Diagram

• The integrated cooling option consists

of a stainless steel cooling coil,
interconnection lines and accompanied
with an optional 6 liter refrigerated
waterbath.

• Cooling system is strategically

positioned above the water pan to
prevent condensation build-up and is
easily removable for decontamination or
conversion to a standard CO2 incubator

Applications for Integrated
Cooling Option

• Regenerative medicine

• Stem cell research

• Autologous tissue regeneration

• Organ Transplant Research

• Diabetes Research

• Food Research

• Mammalian Research

• Genomic and proteomic expression

• Esoteric plant and amphibian cell culture

• Hypersensitive and transgenic cell culture

• Low media volume microplate work

Relative Temperature Performance

+50ºC +50ºC

With

Cooling Coil

+18 ºC

MCO-CL

Without

Cooling Coil

+29ºC over

Ambient

Ambient
Temperature
+24°C

Integrated Cooling Option Specications

Feature

Temperature Range +18ºC to +50ºC, distribution +/ - 0.25ºC, variation +/ - 0.1ºC

Relative Humidity 5ºC to + 50 ºC, 95% +/ - 5%RH; 20 ºC to 25ºC > 8 0%RH; 18ºC > 70%RH

Includes temperature mapping results for individual unit per serial number

Components Stainless Steel Cooling Coil, Interconnection Lines, 6 L, Refrigerated Water Bath & Circulator (Optional / Not Included)

Applies to MCO-19AIC(UVH), MCO-19AIC(UV), MCO-19AIC, MCO-19M(UVH), MCO-19M(UV), MCO-19M

SANYO North America Corporation

www.sanyobiomedical.co m

1300 Michael Drive, Suite A, Wood Dale, IL 60191 USA

Toll Free 800-858-8442 Fax [phone]

Biomedical Solutions Division