Sanyo MCO-17AC User Manual
Direct Heat & Air Jacket™
MCO-17AC
MCO-34AC
CO2 Incubator
SANYO laboratory CO2 incubators are
designed for a wide range of applications
in biomedical, pharmaceutical and clinical
laboratories.
inCu saFe Interior
SANYO is known for innovative and exclusive contamination control features such as inCu saFe™, a copper enriched
stainless steel alloy with inherent germicidal protection against contaminants. InCu saFe™ expresses a natural germicidal
attribute to inhibit the growth of mold, fungi, mycoplasma and bacteria.
Direct Heat and Air Jacket Temperature™ Control
Patented Direct Heat and Air Jacket™ temperature control ensures for accurate and uniform chamber temperature and CO2
levels. The MCO-17AC/34AC is microprocessor controlled to maintain temperature uniformity and optimum humidity levels.
control panel
CO2 Control
Available with high precision, reliable thermal conductivity (T.C.) CO2 sensor.
Anti Contamination Design Benefits
• Circulation blower and CO2 injection cuts off when door is opened, keeping contaminated outside air from being drawn
into the chamber.
• Full rounded corners in the interior chamber are constructed of electro-polished copper-alloy stainless steel. Copper-alloy
stainless steel plenums, shelves and brackets extend contamination control to the chamber interior. All are easily removed
for cleaning.
Control, Alarm and Monitoring
A range of setpoint, alarm and programmable inputs are established through the use of an intuitive keypad. Extra large
digital displays are easy to read.
• Tactile feedback, touch pad and entry keys simplify operation
• Standard parameters are factory-set for quick start-up, and all parameters can be changed as required.
• A remote alarm terminal mounted at the rear of the cabinet can be connected to an external remote alarm system.
Incubation
*Direct Heat and Air Jacket™ U.S. Patent5519188;
**inCu saFe Direct Heat and Air Jacket™, P.I.D./R™
and Active Background Contamination Control™ are
trademarks of SANYO Electric Biomedical Co., Ltd.
My life. My work. My choice.
Specifications
Condition: Ambient temp.20°C, Ambient humidity 45%,
CO
2
levelsetting 5,0%,Water humiditypan 2,0 li tres
Measurement position 12345
Shelfposition
Uppershelf +0.03 +0.14 0..00 -0.15 +0.05
Middle shelf 0.00
Lower shelf-0.15 -0.13 -0.18 -0.13 +0.05
Set temperature 37° C,
Temperature Uniformity
Model MCO-17AC/MCO-34AC
(2 x MCO-17AC + stacking kit)
Heating method
Temperature uniformity
Exterior dimensions (W x D x H) 24.4" x 24.0" x 35.4" (619.7 x 609.6 x 899.2mm)
Interior dimensions (W x D x H) 19.2" x 19.8" x 26.2" (487.7 x 502.9 x 665.5mm)
Effective capacity 5.8 cu.ft.
Shelves Standard 5, Max. 7
Exterior finish Baked-on acrylic finish on galvanized stainless steel
Interior finish Copper alloy stainless steel
Door Baked-on acrylic finish on galvanzied steel with door heater
Inner door Tempered glass
Insulation Foam in place polyurethane (non CFC)
Humidifying system Natural evaporation with water in humidity pan
Temperature Control Microprocessor P.I.D. control
CO
2
control Microprocessor control (sensor: Thermal Conductivity)
Air circulation system Gentle air circulation, upward air flow
Temperature range Ambient temperature +5ºC ~ 50ºC
CO
2
range 0 - 20%
CO
2
variation ± 0.15%
CO
2
inlet pressure 5 - 7 psi
Chamber humidity 95% ± 5% RH (at: 20°C, 60% RH)
Power source Voltage: 115V, 60hz, Amps: 3.6A, Plug/Breaker: NEMA 5-15P/15A
Power consumption 405W
185lbs / 84kgs
Net weight
Direct Heat & Air (DHA) jacket system
± 0.2°C (setting temperature: 37°C, ambient temperature: 20°C)
• Audible and visual alarm
• Temperature, CO
2
, Door alarm
• Independent overheat protection circuit sensor
• Remote alarm contacts
Alarm system
CO
2
Temperature
Humidity
Condition: Ambient temp. 20°C, Ambient humidity 45%,
CO
2
levelsetting 5,0%,Water humiditypan 2,0 litres
Measurement position 12345
Shelfposition
Uppershelf +0.03 +0.14 0..00 - 0.15 +0.05
Middle shelf 0.00
Lower shelf-0.15 -0.13 -0.18 -0.13 +0 .05
Set temperature 37° C,
Temperature Uniformity
GREEN
product
Incubation
www.sanyobiomedical.com
Optional Accessories:
• Rollerbase, MCO-18RB
• CO
Regulator, MCO-100L
2
• Stacking Kit, MCO-18PS
(required to create MCO-34AC)
Temperature Uniformity
Dimensions
SANYO Electric Co.,Ltd., Biomedical
Division, Gumma is certified for
Quality management system:ISO9001/
Medical devices Quality management
system:ISO13485/Environmental
management system:ISO14001
SANYO is committed to developing green
technologies that provide energy efficiency
resulting in lower operational costs with
less impact on the environment.
A Division of SANYO North America Corporation
1300 Michael Drive, Suite A, Wood Dale, IL 60191 USA
Toll Free USA 800-858-8442 • Fax 630-238-0074
1- 300 Applewood Crescent, Concord, Ontario L4K 5C7
SANYO Commercial Solutions
www.sanyobiomedical.com
SANYO Canada, Inc.
905-760-4025 • Fax 905-760-9945
LR-MCO17AC-07.08
Loading...