Instruction Manual
Industrial LCD Monitor
LMU-TK20AG2
Table of contents |
Precautions |
|
|
Precautions ....................................................................................... |
2 |
|
1. |
Before First Use |
|
|
Names and Functions................................................................. |
3, 4 |
|
Check Accessories ......................................................................... |
4 |
|
Outer Dimension ....................................................................... |
5 - 6 |
|
Installation ...................................................................................... |
7 |
2. |
LCD Monitor Instructions |
|
|
Adjusting the Screen ...................................................................... |
8 |
|
Adjustment Procedure .................................................................... |
9 |
|
Adjustment Procedure (Menu Screen) .................................. |
10 - 12 |
|
Adjustment Procedure (Sub-menu Screen) .......................... |
13 - 17 |
|
Additional Functions ..................................................................... |
18 |
3. |
Maintenance................................................................................ |
19 |
4. |
Troubleshooting |
|
|
Fault Finding................................................................................. |
20 |
|
Screen Display ............................................................................. |
20 |
5. |
Specifications |
|
|
Table of Preset Data..................................................................... |
21 |
|
Monitor Specifications .................................................................. |
22 |
European Norm Compatibility / CE
This machine is provided with the CE-mark and therewith corresponding to the norms that are valid for its operation at present. Thus the effective guidelines on the electromagnetic compatibility 89/336/EWG and safety regulations according to low voltage guideline 73/23/EWG and
93/68/EWG are guaranteed. Mutual disturbances with other electronic appliances are normally excluded, if those also are in accordance with valid norms.
Sporadically disturbances cannot, however, be excluded. The product is in conformity with the directives of the valid European guideline.
Placement precautions
•Avoid placing the unit in humid or dusty places, or where it will be exposed to excessive heat (direct sunlight, heaters, etc.)
•Do not step on or set anything on the AC power cord. DAMAGE TO THE AC POWER CORD IS A SAFETY RISK AND CAN CAUSE A FIRE.
•For use with specified AC adapter (PCSV600101A) only.
•Install the unit only on a stable and smooth surface.
•Do not connect the unit to the same AC outlet with appliances that generate large amounts of interference (such as heaters with thermostats, appliances with motors, etc.). It is the best to use a completely separate electrical outlet.
•Keep the unit away from water. If water accidentally enters the unit, unplug the AC power cord immediately. DO NOT PLUG IN THE UNIT AGAIN.
Handling precautions
•Avoid bending, kinking or damaging the AC power cord.
•Never insert or remove the power cord with wet hands. Also, be sure to hold cord by the plug when removing it from the outlet.
•Do not remove any parts that are held in place with screws. (The unit does not contain any user-serviceable items.)
•Maintain standard room temperature (5˚C to 35˚C, or 41˚F to 95˚F) during use. Do not subject the unit to shock or vibration. Do not move the unit while it is in use.
•A rapid increase in room temperature in cool weather can cause condensation to form inside the unit. If this occurs, wait at least 15 minutes after turning the unit on before attempting to operate it.
Microsoft and Windows are registered trademarks of Microsoft Corporation in the U.S.A. and other countries.
1 |
2 |
1 |
|
|
|
|
|
|
|
Before First Use |
|
|
|
||
|
|
|
|
|
|
|
|
Names and Functions |
|
|
|
||
|
|
|
|
|
|
|
|
Front View |
|
|
Rear View |
|
|
|
|
|
|
Display Screen |
DC IN ()
RGB Connector
()
Brightness Control ()
Used to adjust the brightness of the display.
Power Switch ( )
Turns the power to the monitor on and off.
External OSD Control
Connector
Check Accessories
Check that the main unit and all accessories are present.
¡AC adapter ( × 1) |
¡External OSD control box ( × 1) |
¡AC power cord ( × 1) |
¡User's Guide ( × 1) |
¡RGB Cable ( × 1) |
|
3 |
4 |
1 |
Before First Use |
Outer Dimension |
VESA Standard fixing holes
*Max. screw depth : 10mm
5 |
6 |