Sanyo LMU-TK15A3, LMU-TK15A3TC, LMU-TK15A3TS Instruction Manual
Industrial LCD Monitor
LMU-TK15A3
LMU-TK15A3TC
(With Touch Screen)
LMU-TK15A3TS
(With Touch Screen)
User's Guide
Table of contents
Precautions....................................................................................... 2
1. Before First Use
Names and Functions................................................................. 3, 4
Check Accessories......................................................................... 4
Outer Dimension ....................................................................... 5 - 8
Installation ...................................................................................... 9
2. LCD Monitor Instructions
Adjusting the Screen .................................................................... 10
Adjustment Procedure.................................................................. 11
Adjustment Procedure (Menu Screen).................................. 12 - 14
Adjustment Procedure (Sub-menu Screen) .......................... 15 - 19
Additional Functions............................................................... 20, 21
3. Maintenance................................................................................ 22
4. Troubleshooting
Fault Finding................................................................................. 23
Screen Display ............................................................................. 23
5. Specifications
Table of Preset Data..................................................................... 24
Monitor Specifications ............................................................ 25, 26
1
European Norm Compatibility / CE
This machine is provided with the CE-mark and therewith corresponding to the norms that are
valid for its operation at present. Thus the effective guidelines on the electromagnetic compatibility
89/336/EWG and safety regulations according to low voltage guideline 73/23/EWG and
93/68/EWG are guaranteed. Mutual disturbances with other electronic appliances are normally
excluded, if those also are in accordance with valid norms.
Sporadically disturbances cannot, however, be excluded. The product is in conformity with the
directives of the valid European guideline.
2
Precautions
Placement precautions
• Avoid placing the unit in humid or dusty places, or where it will be exposed
to excessive heat (direct sunlight, heaters, etc.)
• Do not step on or set anything on the AC power cord. DAMAGE TO THE
AC POWER CORD IS A SAFETY RISK AND CAN CAUSE A FIRE.
• For use with specified AC adapter (GI40-US1225) only.
• Install the unit only on a stable and smooth surface.
• Do not connect the unit to the same AC as outlet with appliances that
generate large amounts of interference (such as heaters with thermostats,
appliances with motors, etc.). It is best to use a completely separate
electrical outlet.
• Keep the unit away from water. If water accidentally enters the unit, unplug
the AC power cord immediately. DO NOT PLUG IN THE UNIT AGAIN.
Handling precautions
• Avoid bending, kinking or damaging the AC power cord.
• Never insert or remove the power cord with wet hands. Also, be sure to
hold cord by the plug when removing it from the outlet.
• Do not remove any parts that are held in place with screws. (The unit does
not contain any user-serviceable items.)
• Maintain standard room temperature (5˚C to 40˚C, or 41˚F to 104˚F) during
use. Do not subject the unit to shock or vibration. Do not move the unit
while it is in use.
• A rapid increase in room temperature in cool weather can cause
condensation to form inside the unit. If this occurs, wait at least 15 minutes
after turning the unit on before attempting to operate it.
Microsoft and Windows are registered trademarks of Microsoft Corporation in
the U.S.A. and other countries.
3
1
Names and Functions
Before First Use
RGB Connector
( )
Serial Port Connector ( )
(for LMU-TK15A3TC and LMU-TK15A3TS)
External OSD Control
Connector
Display Screen
Touch Screen
in case of LMU-TK15A3TC
and LMU-TK15A3TS
Front View
4
Power Switch ( )
Turns the power to the monitor on
and off. Pressing the front side
of the switch turns the power on.
Brightness Control ( )
Used to adjust the brightness
of the display.
DC IN
( )
Rear View
Check Accessories
Check that the main unit and all accessories are present.
¡¡
AC adapter (
x
1)
¡¡
AC power cord (
x
1)
¡¡
RGB Cable (
x
1)
¡¡
External OSD control box (
x
1)
¡¡
User's Guide (
x
1)
for LMU-TK15A3TC and
LMU-TK15A3TS
¡¡
Serial Cable (
x
1)
for LMU-TK15A3TC only
¡¡
Touch Screen Driver CD-ROM
(
x
1)
Before First Use
5
Outer Dimension
1
LMU-TK15A3
6
VESA Standard fixing holes
Max. screw depth : 10mm
7
Before First Use
Outer Dimension
1
LMU-TK15A3TC/LMU-TK15A3TS
8
VESA Standard fixing holes
Max. screw depth : 10mm
Loading...