SANYO LC372100PP Technical data

Overview
The LC372100PP, LC372100PM and LC372100PT are 262,144-word × 8-bit organization (2,097,152-bit) mask programmable read only memories. The LC372100PP-10, LC372100PM-10 and LC372100PT-10 feature an access time of 100 ns, an OE access time of 40 ns, and a standby current of 30 µ A, and are optimal for use in 5-V systems that require high-speed access. The LC372100PP-20LV, LC372100PM-20LV and LC372100PT-20LV feature an access time of 200 ns, an OE access time of 80 ns, and a standby current of 4 µ A, and thus are optimal for use in 3-V systems that use batteries. Additionally, they provide high-speed access in
3.3-V systems (3.0 to 3.6 V) with a 150-ns access time and a 60-ns OE access time. These ROMs adopt the JEDEC standard pin assignment which allows them to replace EPROM easily. To prevent bus line collisions in multi-bus microcontroller systems, pin 24 can be mask programmed to be either active high or active low.
Features
• 262144 words × 8 bits organization
• Power supply LC372100PP, PM, PT-10: 5.0 V ± 10% LC372100PP, PM, PT-20LV: 2.7 to 3.6 V
• Fast access time (tAA, tCA) LC372100PP, PM, PT-10: 100 ns (max.) LC372100PP, PM, PT-20LV: 200 ns (max.)
150 ns (VCC= 3.0 to 3.6 V)
• Operating current LC372100PP, PM, PT-10: 70 mA (max.) LC372100PP, PM, PT-20LV: 20 mA (max.)
• Standby current LC372100PP, PM, PT-10: 30 µA (max.) LC372100PP, PM, PT-20LV: 5 µA (max.)
• Full static operation (internal clocked type)
• Fully TTL compatible (5 V supply)
• 3 state outputs
• JEDEC standard pin configuration
• Package type LC372100PP-10/20LV: DIP32 (600 mil) LC372100PM-10/20LV: SOP32 (525 mil) LC372100PT-10/20LV: TSOP32 (8 mm ×20 mm)
Package Dimensions
unit: mm
3192-DIP32
unit: mm
3205-SOP32
unit: mm
3224-TSOP32
CMOS IC
53098HA (OT)/51195TH (OT)/41095TH (OT) No. 5088-1/5
Preliminary
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
2 MEG (262144 words × 8 bits) Mask ROM
Internal Clocked Silicon Gate
LC372100PP, PM, PT-10/20LV
Ordering number : EN*5088C
SANYO: DIP32
[LC372100PP]
SANYO: TSOP32 (type-I)
[LC372100PT]
SANYO: SOP32
[LC372100PM]
查询LC372100PM供应商
No. 5088-2/5
LC372100PP, PM, PT-10/20LV
Pin Assignments
Block Diagram
Truth Table
X: H or L level should be offered.
Pin Functions
A0 to A17 Address input D0 to D7 Data output CE/CE Chip enable input OE/OE Output enable input V
CC
Power supply
V
SS
Ground
CE/CE OE/OE Output Current drain
L/H X High-impedance Standby mode H/L L/H High-impedance Operating mode H/L H/L DOUT Operating mode
Loading...
+ 3 hidden pages