SANYO LC371100SM-10LV, LC371100ST-20LV, LC371100ST-10LV, LC371100SP-20LV, LC371100SP-10LV Datasheet

...
Overview
The LC371100SP, LC371100SM and LC371100ST are 131,072-word × 8-bit organization (1,048,576-bit) mask programmable read only memories. The LC371100SP-10, LC371100SM-10 and LC371100ST-10 feature an access time of 100 ns, an OE access time of 40 ns, and a standby current of 30 µ A, and are optimal for use in 5-V systems that require high-speed access. The LC371100SP-20LV, LC371100SM-20LV and LC371100ST-20LV feature an access time of 200 ns, an OE access time of 80 ns, and a standby current of 4 µ A. Additionally, they provide high-speed access in 3.3-V systems (3.0 to 3.6 V) with a 150-ns access time and a 60­ns OE access time. These ROMs adopt the JEDEC standard pin assignment which allows them to replace EPROM easily. To prevent bus line collisions in multi-bus microcontroller systems, pin 24 can be mask programmed to be either active high or active low.
Features
• 131072 words × 8 bits organization
• Power supply LC371100SP, SM, ST-10: 5.0 V ± 10% LC371100SP, SM, ST-20LV: 2.7 to 3.6 V
• Fast access time (tAA, tCA) LC371100SP, SM, ST-10: 100 ns (max.) LC371100SP, SM, ST-20LV: 200 ns (max.)
150 ns (VCC= 3.0 to 3.6 V)
• Operating current LC371100SP, SM, ST-10: 70 mA (max.) LC371100SP, SM, ST-20LV: 20 mA (max.)
• Standby current LC371100SP, SM, ST-10: 30 µA (max.) LC371100SP, SM, ST-20LV: 5 µA (max.)
• Full static operation (internal clocked type)
• Fully TTL compatible (5 V supply)
• 3 state outputs
• JEDEC standard pin configuration
• Package type LC371100SP-10/20LV: DIP32 (600 mil) LC371100SM-10/20LV:SOP32 (525 mil) LC371100ST-10/20LV: TSOP32 (8 mm × 20 mm)
Package Dimensions
unit: mm
3192-DIP32
unit: mm
3205-SOP32
unit: mm
3224-TSOP32
CMOS LSI
43098HA (OT)/51195TH (OT)/41095TH (OT) No. 5087-1/5
Preliminary
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
1 MEG (131072 words× 8 bits) Mask ROM
Internal Clocked Silicon Gate
LC371100SP, SM, ST-10/20LV
Ordering number : EN*5087C
SANYO: DIP32
[LC371100SP]
SANYO: SOP32
[LC371100SM]
SANYO: TSOP32 (type-I)
[LC371100ST]
No. 5087-2/5
LC371100SP, SM, ST-10/20LV
Pin Assignments
Block Diagram
Truth Table
X: H or L level should be offered.
Pin Functions
A0 to A16 Address input D0 to D7 Data output CE/CE Chip enable input OE/OE Output enable input V
CC
Power supply
V
SS
Ground
CE/CE OE/OE Output Current drain
L/H X High-impedance Standby mode H/L L/H High-impedance Operating mode H/L H/L DOUT Operating mode
Loading...
+ 3 hidden pages