Sanyo LA5603 Specifications

Page 1
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
Monolithic Linear IC
Multifunction,
Multiple Voltage Power Supply
Ordering number:ENN4063
LA5603
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, T aito-ku, TOKYO, 110-8534 JAPAN
Overview
The LA5603 is a multifunction, low dropout voltage, mul­tiple voltage power supply for use in microcomputer controlled audio equipment such as CD players and minicomponent stereo systems. The LA5603 features a 5.6V, 0.5A supply, a 7.5V, 1.0A supply and a –7.5V, –1.0A supply each with an on/off switch, a 4.8V (I
OA2
=0.1A, I current prevention diode and a 5.6V (I supply enabling it to power both analog and digital compo­nents. The LA5603 incorporates reset, mute and power-on func­tions for generating signals for the components (s) being powered and an adjustable startup delay function for con­trolling the sequence in which system components are pow­ered up. The LA5603 operates from a ±8.5 to ±16V dual supply and is available in 18-pin SIPs.
Features
• Low dropout voltage power supply.
• 5.6V, 0.5A supply with on/off switch.
• 7.5V, 1.0A and –7.5V, –1.0A supplies with on/off switches.
• 4.8V (I
OA2
=0.1A, I
reverse currents.
• 5.6V (I
OA1
=0.1A, I
• Reset function.
• Mute function.
• Auto power-on function.
• Powers both analog and digital components.
±8.5 to ±16V dual supply.
• 18-pin SIP.
=0) supply with diode to prevent
OA1
=0) supply.
OA2
=0) supply with a reverse
OA1
OA1
=0.1A, I
OA2
=0)
Package Dimensions
unit:mm
3109-SIP18H
[LA5603]
37.0
30.0
13.8
15.0max
8.0
6.0
0.8min
1
1.5 2.0 1.0
0.5
4.5
R1.7
11.0
18
0.4
2.25
SANYO : SIP18H
51001TN (KT)/N042TS No.4063–1/4
Page 2
LA5603
Specifications
Maximum Ratings at Ta = 25˚C
retemaraPlobmySsnoitidnoCsgnitaRtinU
egatlovylppuSV
egatlovtupniNIKCIUQV
noitapissidrewopelbawollAxamdP 51W
erutarepmetgnitarepOrpoT 58+ot02–
erutarepmetegarotSgtsT 051+ot55–
CCV/EE
Recommended Operating Conditions at Ta = 25˚C
retemaraPlobmySsnoitidnoCsgnitaRtinU
egatlovylppuSV
1tnerructuptuOI 2tnerructuptuOI 3tnerructuptuOI
tnerructuptuoETUMI
tnerrucknistuptuolevel-wolSERI
tnerrucecruostuptuolevel-hgihSERI
tnerructuptuoylppuslatotrewopyrailixuAI
CCV/EE
1AO
Operating Characteristics
retemaraPlobmySsnoitidnoC
]ylppusrewopniaM[
at Ta=25°C, Tj=25°C, VCC/VEE=±8.5V, V
egatlovtuptuO
egatlovtuoporDV
noitalugereniL
noitalugerdaoL
tnerructuptuokaePI
tnerructiucric-trohstuptuOI
tnerrucegakaeltuptuOI
ylppusrewopevitisophtiwniardtnerruC
ylppusrewopevitagenhtiwniardtnerruC
]teseR[
at Ta=25°C, Tj=25°C, VCC/VEE=±8.5V
egatlovlevel-hgihtuptuOV
egatlovlevel-woltuptuOV
dlohserhtegatlovtuptuOV
egatlovsiseretsyHsyhVI
emityaledtuptuOt
]ylppusrewopV6.5[
at Ta=25°C, Tj=25°C, VCC/VEE=±8.5V, IO=200mA unless otherwise noted
egatlovtuptuOV
egatlovtuoporDV
noitalugereniL
noitalugerdaoL
tnerructuptuokaePI
tnerructiucric-trohstuptuOI
egatlovesiontuptuOV
tneiciffeocerutarepmetegatlovtuptuO
oitarnoitcejerelppiRR
egatlovtuptuolevel-hgihNEV
V V
VV
I I I
I
V
V
VO/∆ aT
xam 61±V
NIKCIUQ
1O 2O 3O
ETUM LRO HRO
I,
I
2AO
1AO 2AO
PORD
NL1AO DL1AO
PO
CSO
KAELAO
1PQ 2PQ
1MO 2MO
HRO LRO
TR
d
1O
PORD
NLO
DLO
PO
CSO
ON
jer HNE
I+
1AO
=5.6V, V
OA1
I
2AO
I
2AO
V
CC
I
1AO
V
CC
I1OI,2OI,3OI, I
1O
I
ETUM
I1OI,2OI,3OI, I1OI,2OI,
I
HRO
I
LRO
I
1AO 1AO
CdFµ1=042003063sm
V
CC
V
CC
I
O
I
O
Tj=25 to 85˚C
61V
˚C ˚C
61±ot5.8±V 005ot0Am
0.1ot0A 0ot0.1– A 01ot0Am 2ot0Am 002ot0Aµ
2AO
nimpytxam
=4.8V, I
OA2
I(0=
1AO
I(Am001=
I,V21ot7=
Am001ot1=02001Vm
V,V0=
2AO
I,Am002=
2O
Am5=
1AO
Aµ002=74.479.474.5V
C,Am2=
d
V,Am5=
1AO
Am5=001002Vm
V61ot5.8=02001Vm
V61ot5.9=02001Vm Am005ot5=05051Vm Am001ot5=02001Vm
zHk001otzH01=f07Vµ
V,zH021=f
CC
=100mA, unless otherwise noted
OA1
)Am001=2.56.59.5V )0=2.48.42.5V
1AO
Am05=0108Vm
1AO
001002Am
V6=2Aµ
Idna
1AO
Idna
1AO
Idna
dednuorg001002Vm
V61ot5.8=47Bd
NOecruosrewopniaM03.0V
A0=5.65.91Am
ETUM
I,Am005=
ETUM
I,Am0=
3O
ETUM
1AO
A0=2.3– 6.9– Am
I,A0=
3O
wolegatlovnoitceted7.39.31.4V
,Am001=
Am005–=3.6– 91– Am
1.56.59.5V
005057Am
001ot0Am
sgnitaR
6.00.1V
01Am
6287Am
6.00.1V
08Am
7.0–
mV/˚C
Continued on next page.
tinU
No.4063–2/4
Page 3
Continued from preceding page.
retemaraPlobmySsnoitidnoC
]ylppusrewopV5.7[
at Ta=25°C, Tj=25°C, VCC/VEE=±8.5V, IO=500mA, CO=100µF unless otherwise noted
egatlovtuptuOV
egatlovtuoporDV
noitalugereniL
noitalugerdaoL
tnerructuptuokaePI
tnerructiucric-trohstuptuOI
egatlovesiontuptuOV
oitarnoitcejerelppiRR
]ylppusrewopV5.7–[
at Ta=25°C, Tj=25°C, VCC/VEE=±8.5V, IO=–500mA, CO=100µF unless otherwise noted
egatlovtuptuOV
egatlovtuoporDV
noitalugereniL
noitalugerdaoL
tnerructuptuokaePI
tnerructiucric-trohstuptuOI
egatlovesiontuptuOV
oitarnoitcejerelppiRR
]etumhtiwylppusrewopV0.5[
egatlovtuptuoNOETUM
egatlovtuptuoFFOETUM
tnerruclevel-hgihNIKCIUQ
LA5603
2O
PORD
I
Am003=4.08.0V
NLO DLO
PO
CSO
ON
jer
3O
PORD
NLO DLO
PO
CSO
ON
jer
NOETUM
HNIKCIUQ LNIKCIUQ
HNIKCIUQ
O
V
CC
I
O
VCCV/
Tj=25 to 85˚C
I
O
V
EE
I
O
VCCV/
Tj=25 to 85˚C
V
FFOETUM
V
A1otAm5=08002Vm
EE
V,zH021=f
CC
Am003–=4.08.0V
EE
V,zH021=f
CC
NIKCIUQ
NIKCIUQ
VV
tneiciffeocerutarepmetegatlovtuptuO
tneiciffeocerutarepmetegatlovtuptuO
at Ta=25°C, Tj=25°C, VCC/VEE=±8.5V, IO=–5mA
egatlovtupnilevel-hgihNIKCIUQ
egatlovtupnilevel-wolNIKCIUQ
VO/∆ aT
VV
VO/∆ aT
V
V
V V
I
sgnitaR
nimpytxam
1.75.78.7V
6.00.1V
V61ot5.8=02001Vm
V21±=0.15.1A
1.0A
zHk001otzH01=f07smrVµ
5.0–
V61ot5.8=06Bd
8.7– 5.7– 1.7– V
6.00.1V
V5.8–ot61–=002003Vm Am5–otA1–=08002Vm V21±=5.1– 0.1– A
3.0– A
zHk001otzH01=f07Vµ
5.0+
V5.8–ot61–=06Bd
6.40.54.5V
V5.5=2.03.0V
5.7V
V5.7=042084Aµ
tinU
mV/˚C
mV/˚C
V
CC
5.5V
Design Notes
When the 5.6 (V
), 7.5 and –7.5V output are ON, EN is high impedance.
O1
When QUICK IN is HIGH, mute mode is ON. When QUICK IN is LOW, mute mode is OFF. The output capacitors for VO1, V
OA1
, and V
should be 47µF or greater. The output capacitors for VO2 and V
OA2
O3
should be 100µF or greater. The output capacitors and Cd, the startup delay capacitor, should have good temperature stability to prevent oscillations at low temperatures. Capacitors CN1, CN2, CN3 and CNA suppress noise and improve ripple rejection.
Pin Assignment
No.4063–3/4
Page 4
LA5603
Aluminum heat sink,
t=1.5mm tightened to a
39N·cm tightening torque
and using silicone grease
With an infinite heat sink
No infinite heat sink
Aluminum heat sink
tightened to a
39N·cm tightening
torque and using
silicone grease
°C/W
f
Heat sink heat resistance, θ
Allowable power dissipation, Pd max – W
Ambient temperature, Ta – °C
Heat sink area, Sf – cm
3
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.
Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties.
This catalog provides information as of May, 2001. Specifications and information herein are subject to change without notice.
PS No.4063–4/4
Loading...