Ordering number: EN2619B
Monolithic Linear IC
LA3335M
PLL FM Multiplex Demodulator
for 3 V Headphone Stereos and
Radio-cassette Recorders
Overview
The LA3335M is PLL FM stereo multiplex demodulator IC
designed for use in headphone stereos, etc. which operate from
a low supply voltage.
Applications
.
FM Multiplex IC for 3 V headphones, radio-cassette
recorders
Functions
.
PLL FM stereo decoder, VCO stop, stereo indicator
Features
.
Wide operating voltage range : 1.8 to 6 V
.
Low current dissipation : 1.6 mA
.
Minimum number of external parts required
Package Dimensions
unit : mm
3086A-MFP10S
[LA3335M]
SANYO : MFP10S
Specifications
Maximum Ratings atTa=25°C
Parameter Symbol Conditions Ratings Unit
Maximum supply voltage V
Lamp drive current I
Allowable power dissipation Pd max Ta % 70 °C 50 mW
Operating temperature Topr –20 to +70 °C
Storage temperature Tstg –40 to +125 °C
max 8 V
CC
max 10 mA
L
Operating Conditions atTa=25°C
Parameter Symbol Conditions Ratings Unit
Recommended supply voltage V
Operating voltage range V
Input signal voltage V
CC
op 1.8 to 6 V
CC
IN
3V
150 mV
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN
O3096HA(II)/40594HK/O307TA,TS No.2619-1/6
LA3335M
Operating Characteristics at Ta = 25 °C, VCC= 3 V, input 150 mV, L + R = 90%, pilot = 10%,
f = 1 kHz, See specified Test Circuit.
Parameter Symbol Conditions min typ max Unit
Quiescent current I
Input resistance Ri 35 50 65 kΩ
Output resistance Ro 5.3 7.5 9.7 kΩ
Channel separation CHsep 30 45 dB
Total harmonic distortion THD
Output voltage V
Channel balance CB Monaural 0 1.5 dB
Lamp lighting level V
Lamp hysteresis hy 3.5 dB
Capture range CR Pilot 15 mV ±3%
Allowable input level V
Signal to noise ratio S/N Monaural 82 dB
CCO
O
L
max Monaural, THD = 5% 350 mV
IN
Equivalent Circuit Block Diagram and Test Circuit
No input 1.6 2.5 mA
Monaural 0.6 1.5 %
Stereo main 0.3 1.5 %
Monaural 90 130 180 mV
Pilot 1.5 3.5 6 mV
Decoder
Sync
detection
Lamp
trigger
Stereo
Switch
Phase
comparison
S1: VCO STOP when ON
AMP: Bandwidth of 100 kHz or more, THD = 0.01% or less, input impedance of 330 kΩ or more
* Styrol capacitor
No.2619-2/6