Fold Down Panel Detachable
High Power FM/AM Stereo Receiver
Compact Disc Player/MP3 Player/With ESP
ISO Mounting with Removable Trim Ring
Sirius Function
Remote Control
CD-R/RW Compatibility
CAT-DIR
LOU/ ENT /ENT
50W x 4
-MODE
DISC
MONMUTLOC
6
MODE
BAND
ANU/SKIP/CH
SW
(English)
SIRIUS OPERATION……………. 2~3
1
Page 2
SIRIUS OPERATION
M
S
2
50W x 4
LOU/ENT/ENT
-MODE
LOC MODE
BAND
ANU/SKIP/CH
SW
1
OPEN
VOLUME
SEL
IR
EQ
A-Z/0-9
ECD-T1545
P. S C N
AS/PSMON MUT
DSP
MP 3
1
PAU
3
RPT
2
SCN
4
CAT-DIR
SHF
5
DISC
6845
6
DISC
7
3
SWITCHING TO SIRIUS MODE……………………..…(1)
Press MODE button (1) to select Sirius mode.
SELECTING USER-PRESET CHANNEL……………..(2)
At Sirius mode, the Sirius user-preset channel group (3 groups) is toggled cyclically through the
group by quickly pressing the BAND/LOU/ENT button (2).
The channel will change in the following order:
SR1 SR2 SR3
SELECTING CHANNEL UP/DOWN……………………(3)
Press the MANU/SKIP/CH or button (3) to select the channel up or down.
SEARCHING STATION…………………………….……(4)
When the AS/PS/P.SCAN/MP3 button (4) is pressed, the channel searches for each user preset
station from SR1 to SR2 to SR3.
When an available channel is detected, the station will be held at that preset number and play for
5 seconds. After that, it will mute and search for another available station
Press LOC/S-MODE button (5) to switch Category mode, Skip mode or normal. It is used as the
selection of each:
Normal Category mode Direct Tune Skip Channel mode
When Category mode or Skip mode is engaged, the “CATEGORY” or “SKIP” function is turned
on in the display. When Category mode or Skip mode is released, the “CATEGORY” or “SKIP”
function is turned off. When Direct mode is engaged, “DIRECT” of alphanumeric display is turned
on.
Select Category and TUNE UP/DOWN within selected Category
Use CAT-DIR button (7) or CAT-DIRbutton (6) to select desire Category and press
BAND/LOU/ENT button (2).
In Category mode, stations can be tuned within the same category.
- When the user wishes to search by Category, press LOC/S-MOD button (5) can be pressed
until it goes into Category search mode.
- Press CAT/DIR
category.
- To change channels, press LOC/S-MODE button (5) again to Normal mode, and then press
MANU/SKIP/CH
button (7) or CAT/DIRbutton (6) up and down to get to the desired
or button (3) to select the channel up or down.
The operation of skip channel function
In Skip mode, pressing LOC/S-MODE button (5) for more than 3 seconds sets the SKIP channel
mode. Details for set or release skip channel as follows.
Use MANU/SKIP/CH
sequentially.
- Press BAND/LOU/ENT button (2) to select skip or release the following channel. (If the
channel was skipped, the “SKIP” icon will be displayed.
- Press LOC/S-MODE button (5) for more than 3 seconds again to return to basic mode
automatically after 10 seconds.
Note:
In skip mode, use MANU/SKIP/CH or button (3) to show skipped channels.
or button (3) to be switched SKIP channel set or release mode
How to direct tune
1. In direct mode, display shows DIRECT and “000” channel number. (Hundred Digit flashing
on/off)
2. Use MANU/SKIP/CH
3. Press LOC/S-MOD button (5) again to confirm entry of the hundred digit and the 10s digit is
flashing on/off.
4. Use MANU/SKIP/CH
5. Press LOC/S-MODE button (5) again to confirm entry of the 10s digit and the 1s digit is
flashing on/off.
6. Press LOC/S-MODE button (5) again to confirm entry of the 1s digit.
7. Press BAND/LOU/ENT button (2) to direct tune.
or button (3) to select hundred digit.
or button (3) to select 10s digit.
3
Page 4
M
S
ECD-T1545
OPEN
VOLUME
P. S C N
MP 3
A-Z/0- 9
AS/PS
ECD-T1545
1
PAU
CAT-DIR
3
RPT
2
SCN
4
SHF
6
5
DISC
DISC
MONMUTLOC
SEL
IR
EQ
DSP
Fold Down Panel Detachable
High Power FM/AM Stereo Receiver
Compact Disc Player/MP3 Player/With ESP
ISO Mounting with Removable Trim Ring
Sirius Function (see separate booklet on Sirius Radio operation)
Remote Control
CD-R/RW Compatibility
LOU/ ENT /ENT
50W x 4
ANU/SKIP/CH
-MODE
MODE
BAND
SW
(English)
OPERATING INSTRUCTIONS……………. 2~28
1
Page 5
CONTENTS
COMPACT DISC CARE ...........................................................................................................3
DIGITAL DISPLAY .....................................................................................................................4
DETACHABLE FRONT PANEL .................................................................................................5
GENERAL OPERATION ............................................................................................................6
RADIO OPERATION..................................................................................................................8
CD OPERATION ........................................................................................................................10
• This unit is designed to operate on 12 volts DC, NEGATIVE ground electrical systems only.
• When fuse replacement is necessary, use only a 15 amp fuse. Do not replace with a higher
rated fuse. If the fuse blows often, carefully check all electrical connections for any short
circuits and have your car’s voltage regulator checked also.
• Do not install the unit where it will be exposed to direct sunlight or hot air discharged from the
car heater.
• Do not expose the unit to water or moisture.
• To avoid damaging the unit, never insert anything other than a compact disc into the disc slot.
• This unit should not be adjusted or repaired by anyone except qualified service personnel.
If servicing is required, return the unit to an authorized SANYO mobile audio dealer.
• Use the Controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
• Changes or modifications not expressly approved by SANYO may void the user’s authority to
operate this equipment.
2
Page 6
COMPACT DISC CARE
p
Dirt, dust, scratches and warpage can cause a deterioration in the sound or intermittent skipping
some tracks during play.
TEXT
ReWritable
• This unit has been designed to play compact
discs bearing the identification logo shown on
the left. No other discs can be played.
• Do not use non-conventional discs such as
heart- shaped, octagonal discs, etc.
The player could be damaged.
Recommended CD-R/RW Media
Data may not be properly written to CD-R/RW media depending on the quality of the media.
If this happens, the data may not be reproduced correctly. We recommend the following
manufacturers to insure proper quality of the media.
CD-R Media
TDK USA Corp., Taiyo Yuden (U.S.A.), Inc., Ricoh Corporation, Eastman Kodak Company,
Maxell Corporation of America, Mitsubishi Chemical Corporation, Fuji Photo Film U.S.A.,
Inc., Mitsui Chemicals, Inc., Sony Corporation of America, Philips Electronics North
America Corporation, Imation Corp.
CD-RW Media
TDK USA Corp., Ricoh Corporation, Mitsubishi Chemical Corporation.
Additionally, CD-R media compatible with various speeds such as 2X and 1X-4X are
available. Please refer to the instruction manuals of the drive and the recording software
you are using to selection of the correct media.
• Fingerprints and dust should be carefully
wiped off the signal surface of the disc
(glossy side) with a soft cloth.
Wipe in a straight motion from the inside to
the outside of the disc. Unlike conventional
records, the compact disc has no grooves to
collect dust and debris. Small dust particles
will have no effect on reproduction quality.
• Do not insert a disc which is cracked into the
unit.
• Do not apply paper or write anything on the
surface of the disc.
• To prevent warping the disc, do not expose
it to direct sunlight, high humidity or high
tem
eratures for extended periods of time.
• Never use chemicals such as record cleaning
sprays, antistatic sprays or fluids, benzene
or thinner to clean compact discs.
These chemicals will permanently damage
the plastic surface of the disc.
• When not using the disc player for extended
periods of time, remove the compact disc and
return it to the plastic storage case. This will
protect the disc from dust and exposure to
the sun.
3
Page 7
DIGITAL DISPLAY
Radio Frequency, Time, CD
Track Number, Audio Control
CD-IN indicator
Selected Mode
SAT
Stereo
Local
Channel name
indicator
CLASSIC
SAT
POP
Channel name
ROCK
Category
Mono
Skip
Artist
Loud
Subwoofer
Song title
4
Page 8
DETACHABLE FRONT PANEL
The front panel is designed to be removable for antitheft purposes.
It is recommended that you remove and carry the front panel with you when you leave your car.
HOW TO DETACH THE FRONT PANEL
Press the release button (OPEN) to fold down the front panel.
To remove the front panel, lift it up at a little angle from horizontal position, then first pull out the
right side and then pull out the left side.
OPEN
Front Panel
HOW TO ATTACH THE FRONT PANEL
To install the front panel, first insert the left side into proper position then insert the right side into
place.
When the two sides are fixed into place, push the front panel into main unit.
The left side
Front Panel
The right side
The right side
RETURNING TO THE INITIAL SETTINGS
When the front panel is detached, you can find the RESET
button on the front side of the unit. Press the button, the
Reset Button
Microcomputer of the unit returns to the initial settings. If
the display window is not properly shown or the unit
malfunctions, press the RESET button.
Note
The unit will not operate if panel is installed incorrectly.
CAUTION
• Do not attempt to remove the panel in a manner other than that described above.
• When installing the panel, do not force it into the unit.
• Do not touch the connection terminals of the panel or the unit. It may cause poor contact.
• Use a clean, dry cloth when cleaning the terminals.
• Keep the panel out of direct sunlight and high temperatures.
• Prevent the panel from coming into contact with benzene, thinner, or insecticides.
• Do not drop the panel.
5
Page 9
GENERAL OPERATION
M
S
2
OPEN
VOLUME
SEL
IR
EQ
151094
7
A-Z/0-9
ECD-T1545
P. S C N
AS/PSMON MUT
DSP
MP 3
1
PAU
3
RPT
2
SCN
4
SHF
CAT-DIR
6
5
DISC
DISC
50W x 4
LOU/E NT/E NT
-MODE
LOCMODE
6
BAND
ANU/SKIP/CH
SW
TURNING THE POWER ON........................Any button
Install the front panel and press any button (exceptOPEN button) when ACC is on.
TURNING THE POWER OFF ...............................….. (1)
When system is on, press the button (1) to turn off the unit.
When pressed quickly, the DSP button (5) changes the display as follows.
- In AM/FM mode:
-> Frequency ->CLOCK ->
- In Sirius mode:
-> Channel Name -> Category Name -> Artist Name -> Song Title -> CLOCK ->
- In CD mode:
-> CD ->CLOCK ->
- In CDC (or AUX) mode:
-> CDC (or AUX) ->CLOCK ->
Each display time is 5 seconds, the display will return to the first position after 5 seconds.
SET THE CLOCK…………….................….......(5),(8),(9)
Press the DSP button (5) to show the clock on the LCD display. Then hold the button until the
clock flashes. During this mode, press the MANU/SKIP/CH button (8) to change hours or
The preset buttons (5) can be used to store 6 stations in each band (FM 1, FM 2, FM 3 and AM)
for convenient access to your favorite stations.
• Programming stations ..... 1. Select the desired band, then tune in the station you want to
store in memory.
2. Press and hold one of the preset buttons (5) for more than 2
seconds until the corresponding preset button number appears.
Repeat steps 1. and 2. to program additional stations.
• Quick tuning .................... Select the desired band, then press one of the six preset buttons (5).
Press the AS/PS/MP3 button (3) one time to enter into “Searching track directly” mode.
Set desired track by rotating VOLUME A-Z/0-9 dial (4), and then press
BAND/LOU/ENT button (5) shortly.
Note:
The unit searches the track after few seconds, even if the BAND/LOU/ENT button (5) is
not pressed.
SEARCHING DIRECTORY OR FILE NAME.......…...(3),(4),(5),(15)
Press the AS/PS/MP3 button (3) two times. It enters into “Searching Directory or File
Name” mode. The unit searches files and directories by name which is entered by the
user with the VOLUME A-Z /0-9 dial (4).
- Use rotary encoder VOLUME A-Z/0-9 dial (4) to select the characters A to Z, blank, 0 to 9,
_, -, +.
- Press SEL button (15) to confirm entry of each characters.
- Press BAND/LOU/ENT button (5) to start the title search.
In case the selected title is a directory name, display will show (‘ ‘), then
- Use rotary encoder VOLUME A-Z/0-9 dial (4)to list all songs under this
directory and select the title.
- Press BAND/LOU/ENT button (5) to confirm and start the play.
- Repeat the above steps if the newly selected title is again a directory.
SEARCHING FROM ROOT DIRECTORY......….………(3),(4),(5)
Press the AS/PS/MP3 button (3) three times, the unit searches file or directory from root
directory by VOLUME A-Z/0-9 dial (4). (D-DIR icon turns on if the name is a directory).
Display will list all available directories and songs. Select the desired directory/songs by
using rotary encoder VOLUME A-Z/0-9 dial (4)and BAND/LOU/ENT button (5) to
confirm.
If the selected title is a song, it starts to play.
If the selected title is a directory name, display will show (‘ ‘), then
- Use rotary encoder VOLUME A-Z/0-9 dial (4)to list all songs under this
directory and select the title.
- Press BAND/LOU/ENT button (5) to confirm and start the play.
- Repeat the above steps if the newly selected title is again a directory.
SEARCHING FROM CURRENT DIRECTORY.………..(3),(4),(5)
Press the AS/PS/MP3 button (3) four times, the unit searches file or directory from
current directory by VOLUME A-Z/0-9 dial (4). (D-DIR icon turns on if the name is
directory). The current directory name is displayed for a second and the currently
playing file name is displayed. The user can select the directory or file in the directory by
VOLUME A-Z/0-9 dial (4). The selected file can be played by pressing BAND/LOU/ENT
button (5).
Note:
“MP3” icon turns on when MP3 disc is played and blinks when it is in search mode.
PAUSE.................……………………………………...(11)
Press PAU button (11) to pause MP3 player. Press it again to resume play.
15
Page 19
REPEAT THE SAME SONG...............……………….(13)
Press RPT button (13) to continuously repeat the same song. Press again to cancel repeat
function.
SCAN...............………………………………………….(12)
The scan function enables you to listen to the first few seconds of the song. Press SCN button
(12) to activate/deactivate scan function.
PLAY SONGS IN RANDOM ORDER.........………….(14)
During MP3 operation, press SHF button (14) to play songs in random order. Press again to
cancel the function.
DISPLAY INFORMATION.................………………….(9)
Press DSP button (9) to show the following information, such as the clock, the ID3 TAG (if
available: song title, directory name, artist name, other contents…) and other information.
16
Page 20
MIXED-CD OPERATION
M
S
1
2
50W x 4
LOU/ENT/ENT
-MODE
LOC MODE
BAND
ANU/SKI P/CH
SW
OPEN
VOLUME
SEL
IR
EQ
A-Z/0- 9
ECD-T154 5
P. S C N
AS/PSMON MUT
DSP
MP 3
1
PAU
3
RPT
2
SCN
4
CAT-DIR
SHF
6
5
DISC
DISC
This unit can play the mixed-CD disc (the disc contains both CD audio tracks and MP3 files).
When you insert a mixed-CD disc into the CD slot, it starts to play the CD audio tracks. And the
operation is the same as that of the CD operation described in page 12.
If you want to switch to play MP3 files, press CAT-DIR
button (1) or CAT-DIR button (2), it
will search the disc and start to play the MP3 files. And the operation is the same as the MP3
operation described in page 16.
If you want to revert to play CD audio tracks, press CAT-DIR
button (1) or CAT-DIR button (2)
repeatedly, until it reaches to the end (i.e. when it selects the first directory or the last directory),
and then press CAT-DIR
button (1) or CAT-DIR button (2) again, it will start to play the CD
tracks again.
In this way, you can switch between playing CD audio tracks and MP3 songs repeatedly.
17
Page 21
AUX MODE OPERATION
M
S
SEL
EQ
OPEN
VOLUME
A-Z/0 -9
IR
ECD-T154 5
P. S C N
AS/PSMON MUTLOC
DSP
MP 3
1
PAU
3
RPT
2
SCN
4
SHF
CAT-DIR
6
DISC
5
DISC
50W x 4
LOU/ENT/ENT
-MODE
MODE
1
BAND
ANU/SKIP/CH
SW
SWITCHING TO AUX MODE.......................................(1)
The unit has a pair of auxiliary input terminals (see WIRING figure on page 27). This allows you
to listen to an auxiliary audio source (MP3, portable cassette player, etc).
Press the MODE button (1) with the power on to switch from radio mode or Sirius mode or CD
(MP3) mode to AUX mode.
18
Page 22
ERROR SIGNS
If a problem should occur while operating the CD player, one of the following error signs may be
displayed. Refer to the table below to identify the problem.
DISPLAY DESCRIPTION
ERROR 1
ERROR 2
If a problem should occur while operating the CD CHANGER player, one of the following error
signs may be displayed. Refer to the table below to identify the problem.
DISPLAY DESCRIPTION
ERROR 1
ERROR 2
ERROR 3
ERROR 4
ERROR 5
ERROR 6
MECHANISM ERROR
SERVO ERROR
MAGAZINE or MECHANISM ERROR
EJECT ERROR
LOADING ERROR
UNLOADING ERROR
ELEVATOR ERROR
SLED or SLED SWITCH ERROR
ERROR 7
ERROR 8
ERROR 9
ERROR 10
19
FOCUSING or DISC DATA READ ERROR
CLV or DATA READ ERROR
TOC READ ERROR
THERMAL ERROR
Page 23
REMOTE CONTROL
M
S
5
SWSET
1
POWERVOL
6
4
9
PAUSC NR PT
10
17
SHF
DISC/CAT/DIR
13
15
1.POWER
2. SEL/SET
3. VOL
4. VOL
(A~Z/0~9)
(A~Z/0~9)
5. MOD/SW
6. MANU/SKIP/CH
7. MANU/SKIP/CH
8. AS/PS/P.CAN/MP3
9. BAND/LOU/ENT/ENT
A-Z/0-9
MANU/SKIP/CH
VOLLOU/ENT/ENT
AST
P. S C N / M P 3
S-MODE
10.PAU
11.SCN
12.RPT
13.SHF
14.LOC/S-MODE
15. DISC/CAT/DIR
16.DISC/CAT/DIR
17.1~6 Preset buttons
3
2
7
8
11
14
12
16
REMOTE SENSOR……........…………………..….…..IR
Point the remote control handset to the remote sensor IR. Press the function keys on the
handset to control the system.
IR
50W x 4
LOU/ENT/ENT
-MODE
BAND
ANU/SKIP/CH
SW
OPEN
VOLUME
DSP
P. S C N
MP 3
A-Z/0 -9
AS/PS
ECD-T1545
1
PAU
CAT-DIR
3
RPT
2
SCN
4
SHF
6
5
DISC
MON MUTLOCMODE
DISC
SEL
IR
EQ
20
Page 24
HINTS FOR PROPER AND SAFE OPERATION
• Condensation
Moisture can condense on the optical lens of the CD player during humid or rainy days, or after
the car heater is turned on. If this occurs the disc player may not function properly. To remedy
the situation, remove the disc from the unit and wait approximately one hour. This should allow
the moisture to evaporate and restore normal operation.
• Temperature Consideration
The unit may not operate correctly in extremely hot or cold temperatures. Avoid exposing the
unit to extremely high or low temperatures.
• Interruptions in the sound (skipping)
When the car is driven on very rough surfaces, the sound from the CD player may skip and be
interrupted. This will not cause any damage to the disc or the player. If this occurs, wait for the
road surface to improve before using the CD player.
• Safety
For safer driving, keep the volume at a moderate level to enable you to hear outside sounds
(such as emergency vehicle sirens).
• Cleaning the unit
Clean the unit with a soft, dry cloth. Stains should be removed by wiping the surfaces with a
soft cloth immersed in lukewarm water and wrung dry. Never use strong chemicals or solvents.
These will damage the finish of the unit.
• Disc care
When not using the disc player for extended periods, remove the compact disc and return it to
the plastic storage case. Do not leave a disc partially ejected from the player. If an ejected disc
remains in the loading slot for approximately 10 seconds, the player will reload the disc to
prevent damage.
• Servicing
Should a problem develop, do not open the unit or try to repair it yourself. If servicing is
required, bring the unit to a Sanyo Authorized Service Center.
21
Page 25
TROUBLE SHOOTING
A
Sometimes a simple operational error or a mistake in the wiring can appear to be a problem with
the unit. Before having the unit serviced, refer to the troubleshooting chart below.
Symptom Cause Solution
The compact disc
does not play when
inserted into the
unit.
No power.
The unit does not
work properly
(Eject, Load, Play)
The sound from the
CD player skips.
The disc is dirty.
No radio reception. The antenna cable is not connected. Insert the antenna cable firmly into
The volume control is turned down.
The power connections are not wired
correctly.
The vehicle ignition is switched off.
The fuse is blown.
The microcomputer has been affected
by electrical noise.
The road surface is rough.
The unit is not mounted securely.
The disc is defective.
Turn up the volume control.
Check the +12V and ground
connections.
Switch the ignition to the “ON”
or “ACC” position.
Replace the fuse with another 15
fuse.
Press RESET button.
Wait for the road surface to
improve before playing a disc.
Install the unit securely. Be sure to
use the rear strap if the vehicle
does not provide support for the
rear of the unit. (See page 26)
Try another disc.
If it plays properly, the first disc
may be defective.
Clean the disc as explained on
page 3.
the antenna jack on the unit.
The radio does not
stop on any
stations when
automatic tuning is
used.
22
The signals are weak.
Select a station using manual
tuning.
Page 26
ACCESSORIES AND HARDWARE
(
INSTALLATION
Mounting Bracket
Half Sleeve) X1
Removable Trim Ring
X1
Mounting Strap
and Screw X4
Unlock Levers
X2
Locking Screw
Carrying Case
X1
X1
INSTALLATION
1. BEFORE INSTALLATION
When mounting the unit in a car, keep the unit as level as possible.
If the unit must be mounted at an angle, due to the design of the vehicle, make sure the unit does
0
not tilt by more than 30
.
23
Page 27
2. INSTALLATION PROCEDURES
When mounting the unit into a DIN–standard cutout (182x53 mm) in the dashboard or console,
attach the provided Removable Trim Ring to the unit.
1. Insert the mounting bracket into the DIN-standard cutout (182x53 mm) in the dashboard or
console.
2. Bend the mounting bracket stopper outward until the bracket fits snugly in the cutout.
3. Attaching the Mounting Strap to the underside of the dashboard, using screw. Attach the back
of the unit to the Mounting Strap using support stem bolt and hardware.
UNIT REMOVAL
1. Insert the unlock levers into the slots on each side of the unit until they click into place.
2. Pull the levers to remove the unit.
Notes
• Handle the unlock levers carefully to avoid injuring your fingers.
• Keep the unlock levers in a safe place for future use.
24
Page 28
ELECTRICAL CONNECTIONS
WIRING
ANTENNA SOCKET
Power Antenna/Amplifier Turn On (Blue/Red)
Ground Wire (Black)
+12V Constant Power Supply (Yellow)
+12V Accessory/Switched (Red)
Rear Left
Speaker
Front Left
Speaker
Front Right
Speaker
Rear Right
Speaker
2-SPEAKER SYSTEM
-
+
+
-
+
-
+
-
+
(GREEN/BLACK)
-
(GREEN)
(WHITE/BLACK)
(WHITE)
+
(GRAY/BLACK)
-
(GRAY)
+
(VIOLET/BLACK)
-
(VIOLET)
+
Rch Red
Lch White
FRONT LINE OUT CABLE
Rch Red
Lch White
REAR LINE OUT CABLE
SUBWOOFER CABLE
Rear Left
Speaker
Front Left
Speaker
Front Right
Speaker
Rear Right
Speaker
(Brown)
(Brown)
(Gray)
(Gray)
(Green)
4-SPEAKER SYSTEM
-
+
-
+
-
+
-
+
T
E
K
C
O
S
R
O
)
S
K
N
C
E
S
A
L
E
B
T
(
O
M
E
R
R
.
I
(GREEN/BLACK)
-
(GREEN)
+
(WHITE/BLACK)
--
(WHITE)
+
(GRAY/BLACK)
-
(GRAY)
+
(VIOLET/BLACK)
-
(VIOLET)
+
(BLACK)
AUX IN CABLE
RED
Rch
WHITE
Lch
(BLACK)
CD CHANGER
AND SIRIUS RECEIVER
CONNECTOR SOCKET
CAUTION
• DO NOT connect any speaker wires to the metal body or chassis of the
vehicle.
• DO NOT connect the speaker common (–) wires to each other.
• Connect each speaker wire directly to each speaker terminal.
• All speaker common (–) wires must remain floating.
1. Antenna Socket
• Insert the plug from the antenna installed in your vehicle into this socket. (If your vehicle has a
dual antenna system, a dual antenna to single antenna cable adaptor may be required.)
2. + 12V Constant Power Supply (Yellow)
• Connect this wire to the +12V power terminal which receives power continuously.
3. +12V Accessory/Switched (Red)
• Connect this wire to the terminal which receives power while the ignition switch is ON or in the
ACCESSORY position.
• If the ignition switch does not have on ACC position, connect this wire to a +12V power
terminal which receives power continuously. (Same as item 2.)
25
Page 29
4. Ground Wire (Black)
• Connect this wire to the vehicle chassis.
5. Power Antenna/Amplifier Turn On (Blue/Red)
• Connect this wire to the control terminal of a Power Antenna or an external amplifier.
• When not using a Power Antenna or an external amplifier, this wire is not connected.
6. I.R Remote Sensor Socket
• Connect a remote IR sensor to I.R remote sensor socket to use with the corresponding
remote control and to extend range of remote control.
MAIN UNIT
(OPTIONAL)
(BLACK)
I.R REMOTE SENSOR SOCKET
7. CD Changer and Sirius Receiving Connector Socket
• Connect a CD changer to the CD changer and Sirius Receiving Connector socket
MAIN UNIT
CDC
(sold separately)
• Connect a Sirius module to the CD changer and Sirius Receiving Connector socket
(see separate instruction booklet on Sirius Radio operation)
MAIN UNIT
SIRIUS MODULE
(Sirius tuner module sold separately)
• Connect a Sirius module and a CD changer to the CD changer and Sirius Receiving
Connector socket (see separate instruction booklet on Sirius Radio operation)
MAIN UNIT
SIRIUS MODULE
(Surius tuner module and CD changer sold separately
CDC
26
Page 30
LINE OUT CONNECTIONS
• The unit has two pairs of line out terminals (see WIRING figure above). You can use a
separate front or a separate rear channel amplifier to upgrade your system.
RCA Line- out Jacks
• Connect a patch cable (not supplied) from the White (left channel) and Red (right channel)
RCA line output jacks to the line input terminals of the external amplifier.
AUXILIARY INPUT CONNECTIONS
The unit has a pair of auxiliary input terminals. You can connect a portable audio player through
the terminals of the AUX IN cable (see WIRING figure above).
SANYO Electric Co., Ltd.
Printed in China
Issue date 12/26
27
Page 31
MODEL ECD-T1545 LIMITED WARRANTY
SANYO MOBILE AUDIO
OBLIGATIONS
In order to obtain warranty service, the product must be delivered to and picked up from an Authorized Sanyo Factory Service
Center at the user’s expense, unless specifically stated otherwise in this warranty. The names and addresses of Authorized
Sanyo Service Centers may be obtained by calling the toll-free number listed below.
THIS WARRANTY IS VALID ONLY ON SANYO PRODUCTS PURCHASED AND USED IN THE UNITED STATES OF
AMER ICA.
THIS WARRANTY APPLIES ONLY TO THE ORIGINAL RETAIL USER, AND DOES NOT APPLY TO PRODUCTS USED FOR
ANY INDUSTRIAL, PROFESSIONAL OR COMMERCIAL PURPOSE. THE ORIGINAL DATED BILL OF SALE OR SALES SLIP
MUST BE SUBMITTED TO THE AUTHORIZED SANYO SERVICE CENTER AT THE TIME WARRANTY SERVICE IS
REQUESTED.
Subject to the OBLIGATIONS above and EXCLUSIONS below, SANYO FISHER COMPANY (SFC) warrants this SANYO
product against defects in materials and workmanship for the periods specified below. SFC will repair or replace (at its option) the
product and any of its parts which fail to conform to this warranty with new or reconditioned products or parts. The warranty
period commences on the date the product was first purchased at retail.
For product operation, authorized service center referral, service assistance or problem resolution, call
FACTORY SERVICE 1-800-421-6382
-
LABOR: 1 YEAR PARTS: 1 YEAR
EXCLUSIONS
This warranty does not cover (A) the adjustment of customer-operated controls as explained in the appropriate model’s
instruction manual, or (B) the repair of any product whose serial number has been altered, defaced or removed.
This warranty shall not apply to the cabinet or cosmetic parts, knobs, batteries or routine maintenance.
This warranty does not apply to uncrating, setup, installation, removal of the product for repair or reinstallation of the product after
repair.
This warranty does not apply to the elimination of car static or motor noise, correction of antenna problems, or damage to
compact discs, speakers, accessories or vehicle electrical systems. This warranty does not apply to repairs or replacements
necessitated by any cause beyond the control
of SFC including, but not limited to, any malfunction, defect or failure caused by or resulting from unauthorized service or parts,
improper maintenance, operation contrary to furnished instructions, shipping or transit accidents, modification or repair by the
user, abuse, misuse, neglect, accident, incorrect power line voltage, fire, flood or other Acts of God, or normal wear and tear.
The foregoing is in lieu of all other express warranties and SFC does not assume or authorize any party to assume for it any other
obligation or liability.
THE DURATION OF ANY WARRANTIES WHICH MAY BE IMPLIED BY LAW (INCLUDING THE WARRANTIES OF
MERCHANTABILITY AND FITNESS) IS LIMITED TO THE TERM OF THIS WARRANTY IN NO EVENT SHALL SFC BE LIABLE
FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM OWNERSHIP OR USE OF THIS PRODUCT,
OR FOR ANY DELAY IN THE PERFORMANCE OF ITS OBLIGATIONS UNDER THIS WARRANTY DUE TO CAUSES
BEYOND ITS CONTROL.
SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS AND/OR DO NOT ALLOW
THE EXCLUSION OR LIMITATION OF CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS AND EXCLUSIONS
MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS, WHICH VARY FROM STATE
TO STATE.
For your protection in the event of theft or loss of this product, please fill in the information below for your own personal records.
Model No.
Date of Purchase
Where Purchased
28
Serial No.
(Located on back or bottom side of unit)
Purchase Price
Page 32
21605 Plummer Street
Chatsworth, CA91311
ECD-T1545. Issue Number 1.
Printed in Hong Kong
4
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.