Ordering number : ENN7015
EC4401C
N-Channel Silicon MOSFET
EC4401C
Small Signal Switch and Interface Applications
Features
•
Low ON-resistance.
• Ultrahigh-speed switching.
• 2.5V drive.
Package Dimensions
unit : mm
2197
[EC4401C]
0.5
0.2 0.2
0.05
3
2
0.05
(Bottom view)
4
1
0.3
0.3
0.05
0.05
0.6
1.0
1 : Gate
2 : Source
3 : Drain
0.6
4 : Drain
0.8
SANYO : E-CSP1008-4
Specifications
Absolute Maximum Ratings at T a=25°C
Parameter Symbol Conditions Ratings Unit
Drain-to-Source Voltage V
Gate-to-Source Voltage V
Drain Current (DC) I
Drain Current (Pulse) I
Allowable Power Dissipation P
Channel T emperature T ch 150 °C
Storage T emperature Tstg --55 to +150 °C
DSS
GSS
D
DP
D
PW≤10µs, duty cycle≤1% 0.6 A
30 V
±10 V
0.15 A
0.15 W
Electrical Characteristics at Ta=25°C
Parameter Symbol Conditions
Drain-to-Source Breakdown Voltage V
Zero-Gate Voltage Drain Current I
Gate-to-Source Leakage Current I
Cutoff Voltage VGS(off) VDS=10V, ID=100µA 0.4 1.3 V
Forward Transfer Admittance
Static Drain-to-Source On-State Resistance RDS(on)2 ID=40mA, VGS=2.5V 3.7 5.2 Ω
(BR)DSSID
DSS
GSS
yfs
RDS(on)1 ID=80mA, VGS=4V 2.9 3.7 Ω
RDS(on)3 ID=10mA, VGS=1.5V 6.4 12.8 Ω
=1mA, VGS=0 30 V
VDS=30V, VGS=0 10 µA
VGS=±8V, VDS=0 ±10 µA
VDS=10V, ID=80mA 0.15 0.22 S
min typ max
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft's
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
Ratings
Continued on next page.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
GI IM
92501 TS IM TA-3277
No.7015-1/4
Unit
EC4401C
Continued from preceding page.
Parameter Symbol Conditions
Input Capacitance Ciss VDS=10V, f=1MHz 7.0 pF
Output Capacitance Coss VDS=10V, f=1MHz 5.9 pF
Reverse Transfer Capacitance Crss VDS=10V, f=1MHz 2.3 pF
Turn-ON Delay Time td(on) See specified Test Circuit. 19 ns
Rise Time t
Turn-OFF Delay Time td(off) See specified Test Circuit. 155 ns
Fall Time t
Total Gate Charge Qg VDS=10V, VGS=10V, ID=150mA 1.58 nC
Gate-to-Source Charge Qgs VDS=10V, VGS=10V, ID=150mA 0.26 nC
Gate-to-Drain “Miller” Charge Qgd VDS=10V, VGS=10V, ID=150mA 0.31 nC
Diode Forward Voltage V
SD
See specified Test Circuit. 65 ns
r
See specified Test Circuit. 120 ns
f
IS=150mA, VGS=0 0.95 1.2 V
min typ max
Type No. Indication(Top view) Electrical Connection(Top view) Switching Time Test Circuit
Ratings
Unit
0.16
0.14
0.12
-- A
0.10
D
0.08
0.06
Drain Current, I
0.04
0.02
0
0
10
9
8
7
(on) -- Ω
DS
6
5
ID=40mA
4
3
S
I
-- V
D
3.5V
4.0V
6.0V
0.2
0.4
Drain-to-Source V oltage, VDS -- V
RDS(on) -- V
80mA
DS
2.5V
3.0V
0.6 0.8 1.0
GS
2.0V
Polarity mark (Top)
Gate
Source
Polarity mark (Top)
Gate
Source
VGS=1.5V
IT00029
Ta=25°C
Drain
*Electrodes : on the bottom
Drain
0.30
VDS=10V
0.25
0.20
-- A
D
0.15
0.10
Drain Current, I
0.05
0
0
10
7
5
(on) -- Ω
DS
3
2
V
IN
4V
0V
V
I
D
-- V
IN
G
50Ω
GS
PW=10µs
D.C.≤1%
P.G
Ta= --25°C
0.5 1.0 1.5 2.0
Gate-to-Source V oltage, VGS -- V
RDS(on) -- I
D
Ta=75°C
°C
25
--25°C
VDD=15V
D
S
°C
75
2.5 3.0
VGS=4V
ID=80mA
RL=187.5Ω
V
EC4401C
°C
25
IT00030
OUT
Static Drain-to-Source
On-State Resistance, R
0012134256
Gate-to-Source V oltage, VGS -- V Drain Current, ID -- A
78910
IT00031
Static Drain-to-Source
On-State Resistance, R
1.0
0.01 0.1
23 57 23 5
IT00032
No.7015-2/4
EC4401C
10
7
5
(on) -- Ω
DS
3
2
Static Drain-to-Source
On-State Resistance, R
1.0
0.01 0.1
7
6
5
(on) -- Ω
DS
4
3
Static Drain-to-Source
On-State Resistance, R
--600--40 --201020240 60
23 57 23 5
I
Ambient Temperature, Ta -- °C
5
3
2
-- A
F
0.1
7
5
3
Forward Current, I
2
RDS(on) -- I
D
Ta=75°C
25°C
--25°C
Drain Current, ID -- A
RDS(on) -- Ta
=2.5V
GS
-- V
- -25°C
=4.0V
GS
80 100 120 140 160
SD
=40mA, V
D
=80mA, V
I
D
I
F
°C
Ta=75
25°C
VGS=2.5V
IT00033
IT00035
VGS=0
100
7
5
3
(on) -- Ω
2
DS
10
7
5
3
2
Static Drain-to-Source
On-State Resistance, R
1.0
0.001
1.0
7
5
fs -- S
y
3
2
0.1
7
5
3
2
Forward Transfer Admittance,
Switching Time, SW Time -- ns
0.01
1000
100
0.01
7
5
3
2
7
5
3
2
23 57 23 5
RDS(on) -- I
D
VGS=1.5V
°C
Ta=75
25°C
23 57 23
--25°C
Drain Current, ID -- A
0.01
yfs -- I
D
IT00034
VDS=10V
°C
Ta= --25
°C
75
°C
25
Drain Current, I
SW Time -- I
0.1
D
-- A
D
IT00036
VDD=15V
VGS=4V
t
(off)
d
t
f
t
r
td(on)
0.01
100
10
Ciss, Coss, Crss -- pF
1.0
0.60.5 0.80.7 0.9 1.0 1.1 1.2
Diode Forward V oltage, V
Ciss, Coss, Crss -- V
7
5
3
2
7
5
3
2
02468101214161820
Drain-to-Source V oltage, V
Ciss
Coss
Crss
SD
DS
-- V
DS
f=1MHz
-- V
IT00037
IT00039
10
0.01
10
VDS=10V
9
ID=150mA
8
-- V
7
GS
6
5
4
3
2
Gate-to-Source V oltage, V
1
0
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6
23 57 2
Drain Current, I
D
0.1
-- A
VGS -- Qg
Total Gate Charge, Qg -- nC
IT00038
IT00040
No.7015-3/4
P
-- Ta
0.20
-- W
D
0.15
0.10
0.05
Allowable Power Dissipation, P
0
0 20 40 60 100 120 140
Amibient Temperature, Ta -- °C
D
80
EC4401C
160
IT00236
Note on usage : Since the EC4401C is designed for high-speed switching applications, please avoid using
this device in the vicinity of highly charged objects.
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of September, 2001. Specifications and information herein are subject
to change without notice.
PS
No.7015-4/4
Loading...