Sanyo DS135 Specifications
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters
TOKYO OFFICE, Tokyo Bldg., 1-10 , Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
Ordering number:EN710D
DS135
Diffused Junction Type Silicon Diode
1.0A Power Rectifier
Features
· Plastic molded type.
· Peak reverse voltage : 100 to 400V.
· Average rectified current : IO=1.0A.
Specifications
Absolute Maximum Ratings at Ta = 25˚C
Package Dimensions
unit:mm
1005
[DS135]
C:Cathode
A:Anode
retemaraPlobmySsnoitidnoCE531SDD531SDC531SDtinU
egatloVesreveRkaePV
tnerruCdeifitceRegarevAI
tnerruCdrawroFegruSI
erutarepmeTnoitcnuJjT
erutarepmeTegarotSgtsT
Electrical Characteristics at Ta = 25˚C
retemaraPlobmySsnoitidnoC
egatloVdrawroFV
tnerruCesreveRI
MR
Ta=60˚C
O
MSF
IFA0.1= 0.1V
F
V
R
R
elcyc1,evaweniszH05
VhcaetA:
MR
001002004V
sgnitaR
0.1A
05A
051
˚C
051+ot04–
˚C
tinU
01Aµ
→→
→→
→→
→→
nimpytxam
53098HA (KT)/1129TA/N131KI, TS No.710-1/2
DS135
No products described or contained herein are intended for use in surgical implants, life-support systems,
aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and
the like, the failure of which may directly or indirectly cause injury, death or property loss.
Anyone purchasing any products described or contained herein for an above-mentioned use shall:
Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates,
subsidiaries and distributors and all their officers and employees, jointly and severally, against any
and all claims and litigation and all damages, cost and expenses associated with such use:
Not impose any responsibilty for any fault or negligence which may be cited in any such claim or
litigation on SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of
their officers and employees jointly or severally.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees
are made or implied regarding its use or any infringements of intellectual property rights or other rights of
third parties.
This catalog provides information as of May, 1998. Specifications and information herein are subject to
change without notice.
PS No.710-2/2
Loading...