The mains plug is used as disconnect device, the disconnect device shall remain readily
operable.
1
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16
2
An outside antenna system should not be located in the vicinity of overhead power lines or other
17.
electrical light or power circuits, or where it can fall into such power lines or circuits. When
installing an outside antenna system, extreme care should be taken to keep from touching such
power lines or circuits as contact with them might be fatal.
Wall or Ceiling Mounting – The product should be mounted to a wall or ceiling only as
18.
recommended by the manufacturer.
Apparatus shall not be exposed to dripping or splashing, and no object filled with liquids, such as
19.
vases, shall be placed on it.
When the MAINS plug is used as the disconnect device, the disconnect device shall remain
20.
readily operable.
Note to CATV system installer:
This reminder is provided to call CATV system installer’s attention to Article 820-40 of the NEC that
provides guideline for proper grounding and , in particular, specifies that the cable ground shall be
connected to the grounding system of the building, as close to the point of cable entry as practical.”
3
Table of Contents
Important Information ...........................................................................................................................
Important Safety Insructions ................................................................................................................
Chapter 1: Connections and Setup
Before Initial Setup ..............................................................................................................................
Input List ..............................................................................................................................................
Chapter 2: Menu Operation
Menu .....................................................................................................................................................
Help ......................................................................................................................................................
PC ........................................................................................................................................................
USB ......................................................................................................................................................
Roku .....................................................................................................................................................
Note:The picture of stand installation is just for the reference, please base on the material object for
the real sample.
For model DP58D34, please just follow A - 2, A - 3.
Model
DP39D14
DP42D24
DP50E44
DP55D44
DP58D34
DP65E34
Mounting screws measurements
①M5 (5mm) Diameter, Length-12mm (maximum)
②M4 (4mm) Diameter, Length-20mm (maximum)
M5 (5mm) Diameter, Length-16mm (maximum)
①M5 (5mm) Diameter, Length-12mm (maximum)
②M5 (5mm) Diameter, Length-16mm (maximum)
Note:Stand base screws
are located in the
literature package.
6
DP39D14
M6
2
2
111
DP42D24
DP50E44
DP55D44
DP58D34
DP65E34
2
2
2
2
4
M6
2
M6
4
M6
2
M6
4
M6
4
1
Recommendation to buy screws : top use M6X12. max 15mm); BTM use M6 (X16. max (20mm)
For model DP58D34, please remove neck cover and stand neck before mounting.
Buttons on the TV
Take a certain model for an example:
3
1
4
2
5
6
7
7
1
ENTER
2
3
4
55
6
7
(Please base on the material object for the real sample.)
AUDIO OUTPUT the socket provides composite audio connection.
support amplified high power audio equipment. Please adjust the volume directly on
the external audio equipment. Please do not connect headphones directly to the TV.
OPTICAL OUTPUT:It is possible to output audio through the digital audio terminal.
The TV can
8
Visual Interface (DVI), the jack on the side of your TV is also compatible with DVI
devices.
(For DVI input, it's audio input is shared with PC audio input)
Note: For the audio receiver control ARC, firstly you must have a device which supports
HDMI ARC, then connect it to the HDMI1 port. When the "ARC/CEC Setting" is enabled on
your TV, the TV set's speakers will mute automatically and the audio will be outputted on
your ARC sound device system.
USB Allows you to connect a compatible mass storage device for the display of JPEG
pictures on the TV.
ANTENNA/CABLE IN this socket can be used to connect the outside aerial
(including the analog signal and the digital signal)
HDMI 2/*MHL(High-Definition Multimedia Interface/Mobile High-Definition Link)
Provides an uncompressed digital connection that carries both video and
audio data by way of an integrated mini-plug cable. Since HDMI technology is
based on Mobile High-Definition Link(MHL),the jack on the side of your TV is also
compatible with MHL Device. Connect the Roku Streaming Stick (sold separately)
to quickly enable Smart TV applications.
3
Device
Digital
9
MHL2.1
MHL
Compatibility
480i, 480p, 720p/60Hz, 1080i/60Hz, 1080p/60Hz
WXGA
1080p/30Hz 1080p/60Hz
(*MHL)
The MHL (Mobile High-Definition Link) enables the TV to communicate with connected MHL-compatible
device. When connecting MHL-compatible device, TV simultaneously charges the connected device
while playing photo/music/video from it. You can use the TV remote control to control the connected MHL
-compatible device.
• If “MHL Equipment Control”(P20) is set to “On” , the TV automatically switches to MHL mode
when MHL-compatible device is connected to HDMI I2 (MHL) jack.
• You can continue normal usage of the connected MHL-compatible device (such as receiving calls)
depending on its capability.
• Some remote functions may not be available depending on features of the connected MHL-compatible
device.
Please refer to the device manual for details.
• You can continue charging the MHL-compatible device even when the TV is in standby mode.
• Thi s pr od uc t is o fficially MHL-certified for guaranteed operation with other MHL-certified devices. If you
encounter any problems when using the MHL function, please consult the device manufacturer for support.
10
3
(*MHL)
VIDEO INPUT
INPUT
List
Video
3
REMARK: Due to slim back cover, we recommend connecting the PC with a standard VGA
cable, avoiding cables with thicker connectors/plugs.
(For Model: DP50E44, DP55D44, DP58D34, DP65E34)
11
Press to
select the desired option
open the Input list, then press / to
.
RECALL
SMART
/OK
press the RECALL button return to the previously
viewed channel and replay for Roku.
Return to the Home screen for Roku.
the menu and Roku control.
Special function for Roku.
*
and Roku.
for Roku.
12
13
ENERGY STAR qualification. Use ◄/► to
select the desired location setting(“Home
Mode or “Store Mode”); then press ENTER
/OK to continue to the next screen.
ENERGY STAR is a set of power-saving
guidelines issued by the U. S.
Environmental Protection Agency(EPA) .
ENERGY STAR is a joint program of the U.S.
Environmental Protection Agency and the
U.S.Department of Energy helping us all
save money and protect the environment
through energy efficient products and
practices.
Please Select Language
English
French
Spanish
Use ARROW keys to highlight your choice and then press ENTER/OK key.
A menu screen asks you to select language am ong
English, French and Spanish.
Please select proper location for you TV.
Display will be adjusted for best result.
Home mode qualifies
for ENERGY STAR.
Previous
Regresa
Use ARROW keys to highlight your choice and then press ENTER/OK key.
Store mode is for the
retail display setup
Home
Home mode is for saving energy
and reducing power consumption.
Store
Setup Wizard
Connect an RF cable to the TV 's ANTENNA/CABLE
IN terminal.
Select TV Location
1. Press / button on the remote control to select
Home Mode or Store Mode.
2. Press ENTER button to go.
Please select proper location for your TV.
Display will be adjusted for best result.
Home mode qualifies
for ENERGY STAR.
Previous
Regresa
Use ARROW keys to highlight your choice and then press ENTER/OK key.
Choose Initial Setup method
1. Choose "Quick setup" or "Step by step" to setup
your new television.
2. Press ENTER button to go.
Choose"Quick setup"or"Step by step"
(Advanced users)
Previous
Use ARROW keys to highlight your choice and then press ENTER/OK key.
Store mode is for the
retail display setup
Home
Home mode is for saving energy
and reducing power consumption.
to set up your new television.
Quick setup
Setp by setp
(Recommended)
Store
A menu screen asks you to set the location for TV.
Choosing“Home Mode” for the TV assigns the
optimal picture settings for most home
environments.
Choosing“Store Mode”,which is not
ENERGY STAR compliant, sets the unit up
with predefined settings for retail displ ays.
In this setting, the power consumption may
exceed the requirements of the
If you choose Please connect all
equipment to the TV's inputs and switch them on.
Then press ◄/► button to choose between an Air or
Cable search.
"Quick setup",
Please connect all inputs
to the terminals.
Previous
Use ARROW keys to highlight your choice and then press ENTER/OK key.
Air
Search Start
Make sure all of your
equipments switched on.
Cable
Search Start
(Quick setup chosen)
Skip
14
Chapter 2
Air
【 】
Search channels form an indoor or outdoor antenna.
【】Cable
Search channels from the cable provider.
Analog channels:0Digital channels:0
Channel search will be complete when blue progress bar reaches 100%
(PLEASE DO NOT INTERRUPT THE CHANNEL SEARCH,IT MAY TAKE A WHILE)
Finish
HDMI1
Successfully Completed
HDMI2/MHL
Repeat
HDMI3
Channel search result:
Analog channels:_ _Digital channels:_ _
Input search result:
Video
Use ARROW keys to highlight your choice and then press ENTER/OK key.
Press the Finish button to finalize the Initial Setup and
enjoy watching TV.
NOTE: If you need to do the process again, please
choose Repeat.
If "Step by step" is chosen, options will be more detailed.
Press Continue button to advance.
Press Next button to check connection in detail.
Press
Repeat button to do the process again.
Channel search result:
Analog channels:_ _Digital channels:_ _
Input search result:
Video
Use ARROW keys to highlight your choice and then press ENTER/OK key.
Successfully Completed
HDMI3
HDMI2/MHL
HDMI1
Next
Repeat
Press Continue button to go next.
Connection check phase: Video
please turn on the power of apparatus and check connection.
DVD/Blu-ray
Previous
Use ARROW keys to highlight your choice and then press ENTER/OK key.
please turn on the power of apparatus and check connection.
DVD/Blu-ray
Previous
Use ARROW keys to highlight your choice and then press ENTER/OK key.
Composite Component
Y
(VIDEO)
Pb
Pr
GAME
L
R
Please choose a connection method.
Connection check phase: Video
Composite Component
Y
(VIDEO)
Pb
Pr
GAME
L
R
Neither type of connection could be confirmed.
Video
HDMI 1
HDMI 2/MHL
HDMI 3
Video
HDMI 1
HDMI 2/MHL
HDMI 3
Continue
Continue
Choose"Quick setup"or"Step by step"
to set up your new television.
Quick setup
(Advanced users)
Previous
Use ARROW keys to highlight your choice and then press ENTER/OK key.
Setp by setp
(Recommended)
(Setp by setp chosen)
Looking for a high definition picture?
Please take a moment to review the required connections.
Antenna Information
Air
Cable
Search Start
Previous
Use ARROW keys to highlight your choice and then press ENTER/OK key.
Choose Antenna Information to get a high definition
picture, then press ◄/► button to choose between
an Air or Cable search.
Search Start
Skip
Connection check phase: HDMI
please turn on the power of apparatus and check connection.
DVD/Blu-ray
GAME
At least one connection cannot be checked.
Previous
Use ARROW keys to highlight your choice and then press ENTER/OK key.
If any connection is found, then you can see "Connection
was successful." with blue color.
Connection check phase: HDMI
please turn on the power of apparatus and check connection.
DVD/Blu-ray
GAME
Previous
Use ARROW keys to highlight your choice and then press ENTER/OK key.
Connection was successful.
Video
HDMI 1
HDMI 2/MHL
HDMI 3
Video
HDMI 1
HDMI 2/MHL
HDMI 3
Continue
Continue
15
Chapter 2
Connection check phase: HDMI
please turn on the power of apparatus and check connection.
DVD/Blu-ray
GAME
At least one connection cannot be checked.
Previous
Use ARROW keys to highlight your choice and then press ENTER/OK key.
Channel search result:
Analog channels:_ _Digital channels:_ _
Input search result:
Video
HDMI1
Finish
Use ARROW keys to highlight your choice and then press ENTER/OK key.
Connections that are found will be highlighted in blue
color.
Press the Finish button to finalize the Initial Setup and
enjoy watching TV.
NOTE: If you need to do the process again, please
choose Repeat.
HDMI 2/MHL
Successfully Completed
Successfully Completed
HDMI2/MHL
Repeat
Video
HDMI 1
HDMI 3
Continue
HDMI3
Picture
1. Press MENU to enter the main menu, Press /
button to select.
2. Press to enter. (Press MENU again to exit or
back to parent menu.)
Soun d
Pict ure
Picture Mode
Brightness
Contrast
Color
Tint
Sharpness
Color Temperature
Backlight
Detailed Setting
Move
3.While Picture Mode is "manual",Press / button
to select among Picture Mode/Brightness/Contrast/
Color / Tint / Sharpness / Color Tempe ra tu re /
Backlight/Detailed Settings.
4.Press ENTER / to enter.
5.Press / button to adjust.
6.Press MENU to exit it.
【Picture Mode】
Adjust picture mode to change picture appearance.
Adjust Closed Captioning settings. Only available
under TV and AV source.
Press / button to enter. ENTER
Setu p
Select
English
Off
Off
LockCha nnelPict ure
Help
MENU
Return
Menu Operation
Mode
Set the look of digital Closed Captioning.
Press button to select (Default / Custom). /
Font Style
Select from 8 font styles.
Press button to select (Default / Font 0 / Font 1 / /
Font 2 / Font 3 / Font 4 / Font 5 / Font 6 / Font 7).
Font Size
Adjust the size of the digital Closed Captioning font.
Press button to select (Default /Normal / Small /Large).
FG Color
Adjust the color of the digital Closed Captioning font.
Press button to select (Default/ White /Red /
/
Green / Blue / Yellow / Magenta / Cyan).
BG Color
Adjust the digital Closed Captioning background color.
Press button to select (Default/ Black / Red /
/
Green /Blue/ Yellow / Magenta / Cyan).
FG Opacity
Adjust the transparency of the digital Closed Captioning
font.
Press button to select (Default / Solid / Flashing //
Translucent / ).Trans paren t
CC Mode
Turn Closed Captioning on/off.
Press button to select (CC Off / CC On / CC /
On Mute).
Analog CC
Set Closed Captioning for standard(analog) program.
Press button to select (CC1 / CC2 / CC3 / /
CC4 / Text1 / Text2 / Text3 / Text4).
Digital CC
Set Closed Captioning for digital program.
Press button to select (Service1 / Service2 / /
Service3 / Service4 / Service5 / Service6 / Off).
Option
Adjust the digital Closed Captioning setting.
Press / butt on t o en te r.ENTER
BG Opacity
Adjust the digital Closed Captioning background
transparency.
Press button to select (Default / Solid / /
Flashing / Translucent / ). Transparent
*N ot e: All the options can be adjusted while the
mode is Custom.
【Over Scan】
The setting of Over Scan on/off
Press button to select (Off / On). /
【Input Label】
Press / button to enter. ENTER
19
Menu Operation
【Other Settings】Press / button to enter. ENTER
Blue Screen
The setting of Blue Screen on/off
Press button to select(On / Off). /
Audio Only
Play the audio with the picture turned off. When you
turn the Audio Only on and exit the OSD menu, the
panel will be dark; and then press any key
Mute key and VOL -/+ key)
status.
to exit the Audio Only
(except
Press button to select(Off / On). /
Video Setting
To relevant settings for video.
Press button to select. /
Store Demo
About this TV set presentation.
Press button to select(Off / On). /
MHL Equipment Control
Press button to select(Off / On). /
When "On" is selected, the HDMI2 source will automatically be chosen when MHL equipment is
connected.
When "Off" is selected, the HDMI2 source will need
to be selected manually.
【Sleep Tim er】
Set a timer for the TV to t ur n off automatically.
Press / button to select(Off / 5m in / 1 0m in
/ 15min / 30min / 60min / 90min / 120min / 180min
/240min).
3.Enter your 4-digital password. Default password is
0000.
4.Press / button to select among Change Password /
System Lock / Input Block / US Rating / Canada Rating /
RRT Setting / Reset RRT.
5.Press button to adjust. /
6.PressENU again or back to parent menu. M
Soun d
Chan nelPictu re
Pict ure
Change Password
System Lock
Input Block
US Rating
Canada Rating
RRT Setting
Reset RRT
Move
Setu pLock
Next
Help
Off
MENU
Return
【Change Password】
Press the code the enter a new 4-digital password
then re-enter it to confirm.
【System Lock】
Lock or unlock the buttons on the TV.
Press button to select(Off / On). /
【Input Block】
Block or unblock the input sources.
Press ENTER/ button to enter.
Press button to select(Unblock / Block). /
Lock
1.PressENU to enter the main menu, Press M /
button to select.
2.Press to enter.()PressENU again to exit or
back to parent menu.
Soun d
Pict ure
Enter Password
M
Chan nelPictu re
Setu pLock
0-9
-----
MENU
Help
Return
Soun d
Chan nelPictu re
Pict ure
TV
Video
HDMI 1
HDMI 2
HDMI 3
PC
USB
Move
【US Rating】
Restrict movie and TV p ro gr am s by U S Ra ti ng s.
Only available when "System Lock" is "on".
General audience
Parental guidance suggested
Parents strongly cautioned
Retricted
The TV ratin g compose of two aspects: age-based
TV-14
TV-MA
No te: The content ratings will increase depending on
the level of the age-based ratin g.
For example, a program with a TV-PG V(violence)
rating may contain moderate violence, while a TV-14 V
(violence) rating may contain intense violence.
So lo cking a higher level option will automatically
cause locking the options that has more sensitive level.
No one 17 and under admitted
Adult audience only
MPAA
This system defines the rating control which come
from MPAA rules.
Rating
G
PG
PG-13
R
NC-17
X
Define as
General audience. All ages admitted.
Parental guidance suggested. Some
material may not be suitable for children.
Parents strongly cautioned. Some
material may be inappropriate for children
under 13.
Restricted. Children under 17 require
accompanying parent or adult guardian.
No one 17 and under admitted.
Adult audience only.
【Canada Rating】
Only available when "System Lock" is "on".
Press ENTER/ button to enter.
Restrict movie and TV p ro gr am s by C an ad ian Ratings.
For Canada, the rating setting include the following options:
Canada English, Canada .French
Canada English
These ratings are for programs which are using
English rating system.
Rating
C
C8+
G
PG
14+
18+
Canada
The ratings are for programs which are using
French rating system.
Rating
G
8 ans+
13 ans+
16 ans+
18 ans+
Defined as
Children
Children 8 years and older
General programming
Parental guidance
Vie we rs 1 4 an d ol de r
Adult programming
French
Defined as
General
Not recommended for children under
age 8
Not recommended for children under
age 13
Not recommended for children
under age 16
This program is restricted to adults
RRT Setting】【
Display an advance V-Chip rating table for digital
channels.
The item is available only When current stream has
downloadable rating data.
【Res etRRT】
Reset the RRT to de fault.
The item is available onl y When curr ent strea m has
downloadable rating dat a.
Help
1.PressENU to enter the main menu, Press M /
button to select.
2.Press to enter. (ENU again to exit or
back to parent menu.)
MPress
Pict urePict ure
Soun dSetu pLock
Help
Chan nel
Next
MENU
Help
Return
21
Menu Operation
3.Press ENTER / to enter.
4.Press MENU to exit it
【Help】
Get help from the following choices.
Press / button to select(Auto Recovery/
Self Test /Connection Guide / Antenna Guide /
Contact Us).
On sc reen he lp
What w ould yo u like to d o?
Auto Re cover y
Self Tes t
Conne ction G uide
Anten na Guid e
Conta nt Us
Use ARR OW keys t o highl ight yo ur choi ce and th en pres s ENTER /OK key.
【Auto Recovery】
Quickly find which source has signal by auto
recovery page.
【Self Tes t】
To test if the TV s et i s OK o r no t.
【Connection Guide】
To enter into a page for quick connection test.
【Antenna Guide】
To enter into antenna guide page,with the guide
page,you can conntect your antenna cable step by
step.
【Contact Us】
Some ways to contact us.
4.Press / button to select among H-Pos / V-Pos /
Clock / Phase / Auto .
5.Press to enter.
6.Press button to adjust. /
7.PressENU again or back to parent menu. M
Soun d
Pict ure
H-Pos
V-Pos
Clock
Phase
Auto
Move
【H-Pos】
Adjust the horizontal position of the picture.
Press button to adjust. /
【V-Pos】
Adjust the vertical position of the picture.
Press button to adjust. /
【Clock】
Minimize vertical stripes in the screen image.
Press button to adjust. /
【Phase】
Minimize horizontal distortion.
Press button to adjust. /
【Auto】
Adjust to the PC signal timing automatically.
Press button to enter.
Setu p
Adjust
LockCha nnelPict ure
Help
50
50
50
25
MENU
Return
PC
1.Press to select PC source.INPUT
2.PressENU to enter the main menu, Press
M /
button to select Setup menu.
3.Press to select PC Settings.
Soun d
Pict ure
Menu Language
Closed Caption
Over Scan
Input Label
PC Settings
Other Settings
Restore Default
Move
LockCha nnelPict ure
Setu p
English
sig
Help
Off
MENU
Return
*N ot e:
1. PICTURE menu and description are the same as that
for TV mode.
2. Audio Language in SOUND menu is invalid.
3. TIME menu and description are the same as that for
TV mode.
4.Close Caption in SETUP menu is invalid.
5.US, Canada, RRT Setting and Reset RRT in LOCK
menu is invalid.
6.PC mode has no CHANNEL menu.
22
Menu Operation
VIDEO / HDMI
1. PICTURE menu and description are the same as that
for TV mode.
2. Audio Language in SOUND menu is invalid.
3. TIME menu and description are the same as that for
TV mode.
4.The function of Close Caption is available only in AV/TV
mode.
5.US, Canada, RRT Setting and Reset RRT in LOCK
menu is invalid.
6.Composite/ COMPONENT / HDMI mode has no
CHANNEL menu.
USB
No te :
* Before operating Media menu, Plug in USB
device, then press INPUT bu tt on t o se t th e In pu t
Source to USB.
Press / button to select USB in the Source menu,
then press ENTER button to access.
USB 2.0
Photo
Photo
1.Press INPUT button to display the input source list.
2.Press / button to select USB.
ENTER
3.Press button to enter .
4.Press / button to select drive disk you want to
watch, then press button to enter.
5.Press / button to select the file you want to watch
in the file selecting menu, then press ENTER button to
displaypicture.
ENTER
C:\
Return
img20051.jpg
img20051.jpg
img2005123.jpgimg2005124.jpg
Pause Prev.NextStop Repea tALL Pla ylist Inf o. Rotat e
Resolution: 1024 X 768
Size: 582KBytes
Date: 2008/03/24
Time: 16:41:53
1 / 2
Press button to enter. ENTER
*N ot e: Only support JPG format
1 / 1
CReturn
23
Roku
1. Access the Roku. The Roku logo should appear after
a few seconds.
2.After Roku logo appears on screen, please wait
patiently for about a minute.
3. If Roku does not activate, please follow the
Roku network connection wizard.
Menu Operation
4. If Roku is successfully activated, the following
screen will appear.
24
Chapter 3
Other Information
25
VIDEO INPUT
Other Information
Check your connections. If you used Composite yellow, red, and white cables to connect, make
sure they're connected to the green VIDEO INPUT, and the red and white
26
Other Information
Lock
Enter Password
System lock,
System lock
27
Other Information
60Hz
(For Model: DP39D14, DP42D24, DP50E44, DP55D44)
120Hz (For Model: DP58D34, DP65E34)
Specification
Model
Power
Requirement
DP39D14
DP42D24
DP50E44
Source:
AC 120V, 60Hz
DP55D44
DP58D34
DP65E34
NOTE: Dimensions are in inches
AC Power
Consumption
70 watts
70 watts
90 watts
110 watts
150 watts
140 watts
Weight
20.5Ibs (w/stand)
23.8Ibs (w/stand)
41.6Ibs (w/stand)
45.6Ibs (w/stand)
61.3Ibs (w/stand)
81.6Ibs (w/stand)
28
Width
35.0 (w/stand)
35.0 (w/out stand)
38.1 (w/stand)
38.1 (w/out stand)
44.5 (w/stand)
44.5 (w/out stand)
49.1 (w/stand)
49.1 (w/out stand)
51.5 (w/stand)
51.5 (w/out stand)
57.9 (w/stand)
57.9 (w/out stand)
Height
22.6 (w/stand)
20.8 (w/out stand)
24.3 (w/stand)
22.6 (w/out stand)
27.9 (w/stand)
25.8 (w/out stand)
30.5 (w/stand)
28.8 (w/out stand)
33.0 (w/stand)
30.8 (w/out stand)
36.2 (w/stand)
33.9 (w/out stand)
Depth
7.3 (w/stand)
3.0 (w/out stand)
7.3 (w/stand)
3.6 (w/out stand)
9.1 (w/stand)
2.1 (w/out stand)
9.8 (w/stand)
3.9 (w/out stand)
10.4 (w/stand)
4.0 (w/out stand)
19.7 (w/stand)
2.1 (w/out stand)
29
• MHL, Mobile High-Definition Link and the MHL Logo are trademarks or
registered trademarks of MHL Licensing, LLC.
California
72-39D14M-X93Z2
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.